Search results

From DD-WRT Wiki

You searched for Installation/de

Jump to: navigation, search

For more information about searching DD-WRT Wiki, see Help.

Showing below 211 results starting with #1.


View (previous 500) (next 500) (20 | 50 | 100 | 250 | 500).

Article title matches

  1. WRT54G v4 Installation Tutorial (33 bytes)
  2. Installation (19,920 bytes)
    1: {{Languages|Installation}}
    2: ... flashing. This article helps you determine which installation process is for you on your supported router, as w...
    11: ... with DD-WRT, please see wiki page '''[[Supported Devices]]'''.
    13: ...-WRT please see wiki page '''[[Known incompatible devices]]'''.
    15: ...ant to follow what is written for your particular device.
  3. Installation/ja (27,107 bytes)
    1: {{Languages|Installation}}
    11: ...スの一覧は、wikiのページ '''[[Supported Devices|サポートされるデバイス]]'''を参...
    13: ...覧は、wikiのページ'''[[Known incompatible devices|既知の非互換デバイス]]'''を参照...
    28: ==Identifying Your DD-WRT Firmware==
    29: ...''' information - instead of just going by what model you think you have - [[User:Clock|clock]].
  4. Gateworks Avila/Cambria Installation (14,682 bytes)
    5: ...le='color:red; font-weight:bold'>Please note: The details in these instructions apply specifically to ...
    7: file FLASHING.TXT for details.</div>
    9: ...works GW234x series Network Processor boards provide an excellent platform for building high performan...
    36: .... The firmware is (as of this writing) located under the '''beta''' subsection in a directory called ...
    37: ...ORKS%2F&download=flashing.txt flashing.txt] which describes, albeit in very abbreviated terms, the ess...
  5. Installation/fr (33,903 bytes)
    1: {{Languages|Installation}}
    2: ...teur -s'il est compatible avec DD-WRT - ainsi que des informations qui s'appliquent à tous les routeu...
    4: ==Choisir le bon logiciel embarqué - '''De la plus haute importance'''==
    6: En premier lieu, consultez la base de données : http://www.dd-wrt.com/site/support/ro...
    10: ...vous à la page du wiki intitulée '''[[Supported Devices| Matériels compatibles]]'''.
  6. Installation/zh cn (20 bytes)
  7. Installation/it (26,523 bytes)
    1: {{Languages|Installation}}
    4: ...precisioni o parti incomplete. Se vuoi puoi provvedere tu stesso alla modifica, richiedi un account wi...
    7: Nello spirito del Wiki e dell'Open Source chiunque può collaborare a questo ...
    11: ... flashing. This article helps you determine which installation process is for you on your supported router, as w...
    15: ...ppo lungo, prova ad inserire una parte del codice del tuo router (Esempio : prima "D-Link", poi DAP, e...
  8. Installation/pl (24 bytes)
  9. Installation/ru (32 bytes)
  10. Installation/es (147 bytes)
  11. Installation/pt (9,236 bytes)
    1: {{Languages|Installation}}
    3: ...u roteador um dispositivo inútil. A instalação de programas num roteador, conhecidos como ''firmwar...
    4: ...dor suportado, bem como lhe dar sugestões acerca de roteadores e informação sobre como ''flashear''...
    8: ...sa. Ao longo do tempo, esperamos ver a tradução de todas as páginas. Enquanto isso, aproveite o que...
    10: ...slation process, and is currently incomplete. Besides, references to other articles or pages take you ...
  12. Fr:installation (29 bytes)
    1: #REDIRECT [[Installation/fr]]
  13. Installation/Japanese (29 bytes)
    1: #REDIRECT [[Installation/ja]]

Page text matches

  1. Vsftpd (3,548 bytes)
    2: VSFTP is a package included with Entware. See [[Installing_Entware|Installin...
    6: ...nough memory free. Because of this I describe the installation on SD-cards (/mmc). For sure you can also use you...
    7: ...is procedure will show how to install even the needed ipkg packages on the SD-card.
    21: Installation of vsftpd-Server from [http://downloads.openwrt.o...
    26: Ignore the warnings during ipkg-installation.
  2. DD-WRT Doku (DE) (83,042 bytes)
    1: ...http://www.dd-wrt.com/wiki/index.php/DD-WRT_Doku_(DE)%23WRT350N-Antennen_Mod&usg=ALkJrhg1ggC8OBFonl_XJ...
    8: ...lange nicht mehr aktualisiert. Viele Artikel behandeln DD-WRT Versionen die nicht mehr aktuell sind (D...
    10: ...y hat wahrscheinlich kein Interesse mehr an einer Deutschen-Wiki.
    19: ...ieses vom Mitmachen. Jeder darf, und soll [http://de.wikipedia.org/wiki/Artikel Artikel] verfassen, ed...
    23: [[Image:Wpa2.JPG|thumb|Das Interface der aktuellen DD-WRT v23/v24 Versionen]]
  3. Tutorials (8,922 bytes)
    5: | valign="top" width="100%" style="border: solid 1px #33BBBB; background-color: #CCFFFF; c...
    6: * [[Installation]] - Complete guide for installing DD-WRT on your router<br/>
    9: * [[Index:FAQ|FAQs]] - Everything from Where do I download...
    15: ... Category is here: [https://www.dd-wrt.com/wiki/index.php/Category:Basic_tutorials Category:Basic tuto...
    18: | valign="top" width="50%" style="border: solid 1px #33BBBB; background-color: #CCFFFF; c...
  4. Hauptseite (3,948 bytes)
    3: |bgcolor="#ffffc0" style="color: black; border: 1px solid black"|
    11: ...rstellung eines Tutorials für '''DD-WRT''' verwendet.
    16: <div style="margin: 0; margin-right:10px; border: 1px solid #dfdfdf; padding: 0 1em 1em 1em; back...
    24: ...WRT_Doku_%28DE%29|> DD-WRT Dokumentation Project (DE)]]'''</font>
    25: ...tp://www.dd-wrt.com/wiki/index.php/DD-WRT_Doku_%28DE%29
  5. Recover from a bad flash (41,825 bytes)
    7: ...i>configure</i> your router in ways which make it dead to the world. These techniques may be useful i...
    9: To determine if the router is bricked, carefully follow...
    20: # All should be in default settings now.
    32: ...lay at the front of the router is the best way to determine what type of brick you have and its recove...
    36: ...lit up the other LED's, then a defective [[bootloader]] is present. However, if you can ping 192.168.1...
  6. Glossary (58,851 bytes)
    15: ...thenticator requests more information in order to determine the method. Rather than requiring the aut...
    19: ...rts transfers up to 11 megabits per second under ideal conditions. Transmission occurs over 20 MHz o...
    22: ...llowing it to reach 54 megabits per second under ideal conditions. It requires a radio capable of tra...
    25: ...(Wave II devices) bandwidth. This standard also added MU-MIMO support and 256-QAM modulation. This was...
    28: ....11g equipment can typically operate in 802.11b mode when required to work in 802.11b environments. L...
  7. Linksys EA6500 V1 (23,843 bytes)
    1: ...ys EA Series]][[Category:Linksys_guides]]</noinclude><center>
    2: ...70%;margin-top:+.7em;background-color: #F7F7F7;border-spacing: 0px;text-align:center;"
    6: ...="width:25em;color:#000;border: 2px solid red; border-left-width: 0px;"|
    7: ...2/viewforum.php?f=1 forum] before considering the details on this page to be accurate</font>
    12: ...7em;text-align:center;background-color:#F7F7F7;border-spacing: 0px"
  8. OpenSwan (1,495 bytes)
    13: http://lists.openswan.org/pipermail/dev/2004-May/000322.html
    17: =Installation=
    25: If the installation fails, as it did in my case, try issuing the foll...
    27: ipkg -force-depends install openswan
  9. Kismet Server/Drone (18,210 bytes)
    1: ''For a Linux installation guide on Kismet see:'' [[wrt54g kismet with linux serve...
    4: ...wireless network detector, sniffer, and intrusion detection kit.
    8: ... You are then free to run a Kismet client on your desktop computer view the output.
    10: Anyone familiar with Network Stumbler will definitely appreciate running Kismet Server or Kisme...
    14: ...a desktop computer(s) seems to be the most common installation for windows users<br>
  10. Chillispot (36,629 bytes)
    2: <!-- Note to ChilliSpot Service Providers: -->
    8: If you need to use ChilliSpot and if your device support it you should try a firmware release ...
    16: * Provide a Wi-Fi usage agreement, advertising or other nei...
    18: ...dwidth, up and down, hotspot-connected laptops or desktops can use.
    22: ChilliSpot can be used for single router, or extended with the use of external services to cover an en...
  11. Telnet/SSH and the command line (18,436 bytes)
    2: ...here: '''[[Main_Page|DD-WRT wiki mainpage]] / [[Index:Scripting|Scripting]] / SSH/Telnet & The CLI
    10: ...d for the password, enter your router's password (default "admin")<br>
    15: ...an encrypted protocol and associated program intended to replace telnet. It can also be used for creat...
    17: ...Private keys are never exchanged, and are used to decrypt the information encrypted with the associate...
    39: ...should generate a Public/Private key pair on your desktop machine. This can be done through the "Putty...
  12. No-IP.com Client (5,029 bytes)
    1: ...ain name in sync with my WAN IP address one of my desktop machines, I'd much rather have it running on...
    3: ...on their site on [http://www.no-ip.com/support/guides/routers/dynamic-dns-on-dd-wrt.html how to config...
    9: ... or some other way to copy files to and from your desktop setup
    13: ''If you're running Windows on your desktop:''
    16: =Installation=
  13. Ipkg (tutorial) (10,613 bytes)
    1: Brainslayer is working hard to merge the code base of DD-WRT with the OpenWRT firmware. This me...
    8: ...r Install, upgrade, or remove package from <dest_name>
    9: ...ame> is '''either''' a folder path '''or''' a pre-defined
    11: ... by default, ipkg on DD-WRT supports these pre-defined names:
    15: ... Use <offline_root> as the root for offline installation.
  14. Multi Router Traffic Grapher (5,281 bytes)
    2: ... traffic. MRTG is based on Perl and C and works under UNIX and Windows NT. MRTG is being successfully ...
    4: ...ost is down for a while, no MRTG data can be recorded for the time beeing.
    6: = Installation =
    14: == Desktop ==
    15: There are a number of installation guides on the [http://oss.oetiker.ch/mrtg/ MRTG website...
  15. Knockd (11,206 bytes)
    2: ...ined as a series of either TCP or UDP requests on defined ports. These ports do not even have to be op...
    4: ...k sequence is given. This knock sequence could be defined as connecting to port 22 twice with UDP, por...
    6: ...you to be running knockd ''AND'' took the time to deterime the knock sequence.
    8: ...yourself from attackers as soon as a port scan is detected.
    11: :''It is recommended that you know how to:''<br>
  16. Netgear R7800 (747 bytes)
    1: ==Installation==
    3: ...le from Brainslayer's download locations. See [[Index:FAQ#Where_do_I_download_firmware.3F|Where do I d...
    5: Netgear uses a default IP address of 192.168.1.1
    6: * Default Username: admin,
    7: *Default Password: password
  17. Feature requests (17,201 bytes)
    3: ...om/phpBB2/ forum] and post your request. The main developer (BrainSlayer) does read the forums and gen...
    5: ...ver. I'm not sure Brainslayer reads the English side of the Wiki...
    13: * Auto Upgrade Feature
    15: ...d specific documentation and how-to's should be added also.
    17: ... to enable / disable ports on any given supported device
  18. Miau IRC Bouncer (4,026 bytes)
    7: [http://www.dd-wrt.com/wiki/index.php/JFFS#Testing_ipkg ipkg up to date]
    9: ..._Gurus:_CLI CLI] or [http://www.dd-wrt.com/wiki/index.php/JFFS#Directions_for_.28normal.29_users:_usin...
    12: == Installation ==
    13: The current ipkg update doesn't seem to include miau although it is listed as being a supported p...
    19: If it put an extension on the file you downloaded, then you will need to run
  19. DD-WRT Docu (FR) (22,239 bytes)
    7: =Description du projet=
    8: ...et est de créer une documentation technique et d'installation complète pour le firmware [http://www.dd-wrt.com...
    10: ...Wikis, celui-ci est maintenu par la collaboration de la communauté DD-WRT. Tous sont autorisés à é...
    13: ...tion de la bande passante, et le support logiciel des [http://kiel.kool.dk:27/ SD-Card].<br>
    14: ==Liste complète des fonctionnalités==
  20. DD-WRT Manual (SE) (30,300 bytes)
    1: ...informationen, var vänlig till till den engelska delen. == '''
    8: Denna wikis mål är att skapa en komplett användar...
    10: ...is som alla media-wiki projekt, hålls denna levande av samarbete! Alla är tillåtna att skriva, edit...
    16: [[Image:Wpa2.JPG|thumb|Det nuvarande DD-WRT v23/v24 webbgränssnittet]]
    17: ...1=12&l2=43&l3=0&model=359&modelmenu=1 Asus WL-500 deluxe] 802.11g trådlösa routrar (som körs en var...
  21. Useful Scripts (53,593 bytes)
    2: ...here: '''[[Main_Page|DD-WRT wiki mainpage]] / [[Index:Scripting|Scripting]] / Useful Scripts
    9: ...e a good reason for doing this, it should be considered a hack until the feature is implemented perman...
    36: Afterward put the line below inside a startup script
    74: # transfer - FTP Transfer ON/OFF (Default is OFF)
    75: # FOLDER - Location where backup scripts are stored
  22. USRobotics USR5461 (11,735 bytes)
    3: ...ers based on a Broadcom or Atheros chip reference design.
    5: ...br>http://www.dd-wrt.com/wiki/index.php/Supported_Devices#US_Robotics
    10: ...VRAM which contains 128KB compressed CFE (Boot Loader). The rest of it (1870 KB) contains OEM/USR firm...
    12: ...-plus''' builds (file size less than 1870 KB) for installation on USR5461.
    14: ...these builds since you will be doing a first time installation of DD-WRT firmware on your original USR5461 route...
  23. Wiviz (6,963 bytes)
    2: ...ll icons on the screen by continuously moving all detected stations on a trajectory around the receivi...
    4: ... center; margin: 1em 10%; background: #80f082; border: #008000 1px solid;">
    9: =Installation of Wiviz (v1)=
    10: ...alk:{{PAGENAME}}|talk page]] for further details. Desweitern scheint die Seite im Firefox 2.0.0.1 nich...
    13: # Use [http://www.dd-wrt.com/wiki/index.php/Telnet/SSH_and_the_Command_Line telnet or SS...
  24. Netgear WNR3500L (3,580 bytes)
    2: ...''smaller than ~7.3 MB''', or you will brick your device.
    8: ...ork. For build information and much more, see [[Index:FAQ#Where_do_I_download_firmware.3F|Where do I d...
    12: ==Installation of DD-WRT from Netgear Firmware==
    17: *Research the forum for "New Build" and router model threads before selecting a build.
    21: *Connect the PC to the router's LAN port (recommended to unplug everything else)
  25. Motorola WR850G (8,284 bytes)
    1: ...is tutorial reflects the latest 23SP2 version the installation method may be different if you're attempting to i...
    3: ... the bottom of the Router. It should be listed under the FCC ID ending as V2 or V1.
    7: ...d on, you risk bricking the router when restoring defaults!'''
    9: ...t=51486], use this page to identify your router model correctly, and use the dd-wrt download search pa...
    11: =Installation=
  26. BWlog (1,057 bytes)
    2: ...rtup script one or more small packages are downloaded into WRT's /tmp.
    11: == Installation ==
    13: Short version (cut'n paste from http://www.hetos.de):
    16: wget http://wrt54g.hetos.de/wrtbwlog.tgz
    24: See the links below for more details.
  27. Installation (19,920 bytes)
    1: {{Languages|Installation}}
    2: ... flashing. This article helps you determine which installation process is for you on your supported router, as w...
    11: ... with DD-WRT, please see wiki page '''[[Supported Devices]]'''.
    13: ...-WRT please see wiki page '''[[Known incompatible devices]]'''.
    15: ...ant to follow what is written for your particular device.
  28. Netgear R9000 (5,210 bytes)
    6: ...idevi.com/wiki/Netgear_R9000 Netgear R9000 on wikidevi]
    12: ==Installation==
    13: [[Index:FAQ#Where_do_I_download_firmware.3F|Download]] a...
    16: ...cate to the router. The original Netgear firmware defaults to IP address 192.168.1.1, username "admin"...
    17: # Go to the Administration page - then Upgrade (or something similar).
  29. Accton (26 bytes)
    1: #REDIRECT [[Installation]]
  30. D-link (26 bytes)
    1: #REDIRECT [[Installation]]
  31. All Asus WL-500xx series routers (5,220 bytes)
    1: [[Category:Asus guides]]
    3: ...uidelines for your specific router. Please see [[Installation]] for more information. Remember to read the [ht...
    5: ...ld guides should be generalised, summarised and added to the Install list below, in an manner that wou...
    11: ...ommended). or even using the web-GUI (not recommended) have also been reported to work for some, for t...
    14: ...commended build for broadcom devices, how to upgrade properly and how to test if you need to use VINT ...
  32. D-Link (584 bytes)
    1: ...tly, and use the dd-wrt download search page ([[Index:FAQ#Where_do_I_download_firmware.3F|Where do I d...
    4: Click the D-link guides link below.
    6: [[Category:D-Link guides| ]]
  33. Linksys WRT54G v2.2 (1,689 bytes)
    4: https://wikidevi.com/wiki/Linksys_WRT54G_v2.2
    6: ==Installation==
    7: ...NOTE:'''</font> '''For flashing, only connect the device to the computer.'''<br>
    13: ...inksys webgui at 192.168.1.1: if a ''Management Mode'' page open, power cycle again
    15: #Go to ''Administration->Firmware Upgrade'' and select [ftp://ftp.dd-wrt.com/betas/2010/08-...
  34. USRobotics USR8200 (6,455 bytes)
    14: Reset the device to defaults.<br>
    16: ...ince the device has the Jungo loader installed by default we have to change it to Redboot to get DD-WR...
    18: You will need a lil [https://dev.openwrt.org/browser/trunk/scripts/flashing/jungo...
    20: ... Redboot itself. The latest version can be downloaded here: [http://mysite.verizon.net/jvasco/openwrt/...
    23: Installation of RedBoot can be accomplished with the jungo-ima...
  35. What is DD-WRT? (20,620 bytes)
    3: ...ers based on a Broadcom or Atheros chip reference design.
    5: ...ects. DD-WRT was created directly from Sveasoft's decision to start charging for their firmware, closi...
    7: ...hive.org/web/20071012064337/http://forum.bsr-clan.de/ftopic4612.html drafted] in the past by BrainSlay...
    9: ...d features not found in the OEM firmware of these devices, or even the firmware available for purchase...
    13: ...DD-WRT is the German car numberplate code for Dresden.
  36. WHR-HP-G54 (24,416 bytes)
    8: * Please include - antenna type, environment (indoor, outdoor, obs...
    10: == Installation of DD-WRT ==
    11: See DD-WRT Wiki article: [[Installation#WHR-G54S.2C_WHR-HP-G54.2C_WZR-HP-G54]].
    15: ...se update this with the Maximum file size you can determine if it is bigger then the value above.
    18: ...byte SDRAM chips and a 4 Megabyte flash chip. The device has a total of 16Mb RAM and 4Mb Flash.
  37. Instalación (27,687 bytes)
    1: {{Languages|Installation}}
    8: ** RT210W, ver notas de instalación para Siemens SE505 v1
    10: ...SUNA:en&sa=X&oi=froogle&ct=title (b&uacute;squeda de productos)]
    34: ** W54-RT, ver notas de instalaci&oacute;n para Siemens SE505 v1
    39: ...B de memoria flash. Las versiones "full" y "mini" de DD-WRT requieren 4MB para ser instalados; la vers...
  38. Netgear WNDR4500 (3,670 bytes)
    4: {| border="1" cellspacing="0"
    41: {| border="1" cellspacing="0"
    72: ====Initial DD-WRT Installation====
    83: ...(with header) '''.chk''' firmware file you downloaded from table above.</li>
    91: ====DD-WRT Upgrade====
  39. 什么是 "DD-WRT"? (53,158 bytes)
    7: ...费的,但 BrainSlayer [http://forum.bsr-clan.de/ftopic4612.html|起草了] (另外一种商业模...
    13: ...Gaming network] 的 [http://www.dd-wrt.com/wiki/index.php/Kai_Daemon Kai 守护程序]、[http://en.wi...
    15: ...么意思?其实就是德国德累斯顿 (Dresden) 的车牌字母。
    22: ...Linksys WRT54G/GL/GS 路由器或其他[Supported Devices|支持]的路由器
    24: * 按照[[Installation |安装]]说明将固件安装到路由器上
  40. Optware (46,421 bytes)
    10: * [http://www.desipro.de/ddwrt/K26/ Kong K2.6 compiled builds] are however...
    14: ...ser-friendly tutorial, on how to use optware on older DD-WRT builds (until build [http://www.dd-wrt.c...
    18: ...tp://kiel.kool.dk/ SD/MMC Card], [[USB]]) is provided for packages.
    20: ...s now depend on /opt/lib/uClibc.so and dynamic loader also in /opt/lib with separate /opt/etc/ld-opt.s...
    29: ...e or optware-devel meta package provides complete development toolchain for compiling programs on rout...
  41. Quick list of Optware packages (104,401 bytes)
    2: 11 packages added from last August
    5: ...5.6-2 - Abook is a text-based addressbook program designed to use with mutt mail client.
    6: * ack - 1.94-1 - grep-like text finder
    9: * aget - 0.4.1-1 - Aget is a multithreaded HTTP download accelerator.
    11: * alac-decoder - 0.1.0-2 - A decoder for the apple lossless file format
  42. 刷新您的Buffalo WBR-G54,WLA-G54,WBR2-G54,WBR2-G54S... (5,336 bytes)
    4: '''WARNING: Use only dd-wrt v23 final (25.dec.2005) or v23 SP1 final (16.may.2006). Some beta ...
    18: Before flashing be sure to restore to factory defaults. Also check if you can connect to the route...
    20: Follow directions under [[Installation#Flashing_the_Buffalo_WHR-G54S_and_WHR-HP-G54]]
    22: ...this 2.32 version, after they had adjusted the header as shown below.
    28: ... DD-WRT generic version with the added Buffalo header. After successful transfer please wait 2-3 min.,...
  43. MN-700 (10,914 bytes)
    3: ... Linksys WRT54G v5). The following links provide details regarding this hack:<br />
    5: *[http://jozerworx.com/tutorials/mn700/default.htm Jozerworx] version of LiamM's hack
    11: ...ardware than the MN-700, so the instructions provided by the links above work for the MN-700 but not t...
    13: == Installation ==
    14: ...will have to clear NVRAM through JTAG (recovery mode will NOT work).
  44. Universal Wireless Repeater (9,297 bytes)
    3: '''THIS IS [[Supported_Devices|BROADCOM]] ONLY!'''
    6: ...he same time, can also be an access point, independent of the SSID and type of encryption used.
    10: ...as '''Wireless Client Bridge''', or '''Range Extender'''. Unlike WDS, once you have this appliance se...
    16: ...and jojo probably has another gateway via cable modem or DSL.
    21: * Know how to [[Installation|flash your device]].
  45. Firmware FAQ (39,234 bytes)
    10: ...d [[Known_incompatible_devices|Known incompatible devices]]. Otherwise search the forums.
    22: ... check them against [[Supported_Devices|Supported Devices]]. There are routers with DD-WRT preinstalle...
    27: ...r first time flashing- where applicable in the folders).
    29: ...orted. If not, the first recommendation by most moderators will be to use the latest available beta bu...
    43: ...g builds (deprecated)|''Kong builds'']] below for deprecated Kong builds
  46. Version 5 And 6 Router Information (5,589 bytes)
    5: = Router Models Covered on This Page =
    7: In all later references we'll call these models "neutered". Why? Because they've had some cruci...
    9: ====Linksys WRT54G Neutered Models====
    14: ====Linksys WRT54GS Neutered Models====
    23: ...ut a lot of time into making firmware for these models. As BrainSlayer wrote in a forum post, "most pr...
  47. D-Link DIR-615 rev C (10,866 bytes)
    6: ...ple on the bottom of the box, underneath the barcode). A similar sticker with the hardware version and...
    8: The factory default IP for this router is 192.168.0.1, user is "...
    13: ...airly new hardware (released in 2009?), so it's widely available for purchase new.
    27: 5-pin header possibly serial console
    39: =Installation Instructions=
  48. Linksys WRT54GS v7.0 & 7.2 (5,118 bytes)
    14: ==Installation==
    16: ... or Remove Programs" (or "Programs and Features", depending on the Windows version) from the Start men...
    19: # Set a static IP address (outside DHCP range e.g. 192.168.1.10), connect the PC eth...
    22: #*# Right-click, go to the LAN device properties, then find and open the ''TCP/IPv4...
    24: #*#*Ensure this static IP is outside the DHCP range
  49. Installation/ja (27,107 bytes)
    1: {{Languages|Installation}}
    11: ...スの一覧は、wikiのページ '''[[Supported Devices|サポートされるデバイス]]'''を参...
    13: ...覧は、wikiのページ'''[[Known incompatible devices|既知の非互換デバイス]]'''を参照...
    28: ==Identifying Your DD-WRT Firmware==
    29: ...''' information - instead of just going by what model you think you have - [[User:Clock|clock]].
  50. Supported Devices (228,857 bytes)
    4: December 3rd, 2019
    13: From there, [https://forum.dd-wrt.com/phpBB2/index.php go to the Forums] to read about specific bet...
    24: This page lists and compares devices known to work with DD-WRT, but some are a wo...
    26: ... detection] to determine whether support can be added in the future.
    31: ...r all devices. To flash later versions, read the device's wiki and threads, and read new build thread...
  51. AutoAP (11,423 bytes)
    4: ...t Mode]], or [[Wireless_Bridge | Client-Bridged Mode]].
    7: :''Before using this guide, it is recommended that you know how to:<br>''
    8: ... [[Installation | flash your device]]<br>
    10: ...nt Mode]] or [[Wireless_Bridge | Client-Bridged Mode]].<br>
    12: =Installation=
  52. Linksys WRTSL54GS (13,481 bytes)
    2: This page describes the installaton of DD-WRT on WRTSL54GS. WR...
    32: /dev/root 2880 2880 0 10...
    33: /dev/mtdblock/4 4352 2536 1816 5...
    67: Setting the PFC to its default value
    68: Determined physical RAM map:
  53. LaFonera Software Flashing (30,993 bytes)
    1: ...t=51486], use this page to identify your router model correctly, and use the dd-wrt download search pa...
    10: (for easy installation of the FON2200 [http://www.dd-wrt.com/phpBB2/view...
    12: ... RedBoot via serial and change this or flash your device through serial.<br />
    34: ...ur Windows machine (it's a simple no-installer-needed HTTP server). If the link does not work, try [ht...
    35: ...g" pane of System Preferences. Use the "Sites" folder in your home directory to serve files.
  54. Routeurs en mode réseau WDS (6,113 bytes)
    1: ...y a rien sans rien, le mode WDS consomme de la bande passante normalement attribuée aux clients sans ...
    3: Avec DD-WRT, ce mode fonctionne avec les niveaux de sécurité WEP, WPA et WPA2 activés. Allez toute...
    6: * 3Com OfficeConnect,3CRWE454G72, en mode Repeater
    8: * [http://www.dd-wrt.com/wiki/index.php?title=WDS_Linked_router_network#Setting_up_W...
    10: * Belkin F5D7130 Wireless Range Extender/Access Point
  55. Instalacja (266 bytes)
    1: {{Languages|Installation}}
  56. LaFonera Software Universal-Repeater (25,850 bytes)
    8: So i decided to port it to work on dd-wrt. Yet I think the ba...
    10: ...he files which are nessesary on my websrver and made them available to the rest of you.
    18: wget http://www.wildblue.de/universalRepeating.tar.gz
    30: I made it as good working as possible, but i think some ...
    32: feel free to contact me at ben(at)wildblue.de
  57. Siemens SE505 (3,810 bytes)
    1: ...t=51486], use this page to identify your router model correctly, and use the dd-wrt download search pa...
    3: ...you have additionally to check your configuration details after flashing.
    16: ...xceptions to this rule. This can be done by yast oder you simply type as root user:
    19: ...92.168.2.0 netmask 255.255.255.0 gw 192.168.2.100 dev eth0:1
    29: ...changed your router's IP, you have to restore the default IP to 192.168.2.1. This can be done by acces...
  58. OpenVPN - Site-to-Site Bridged VPN Between Two Routers (15,515 bytes)
    3: ...routers have not been tested by the author. To understand more about bridged VPNs, you can read [http...
    9: ...shing the routers]] with the .bin file you downloaded. Both routers need to be flashed with the same ...
    32: openvpn --mktun --dev tap0
    38: mode server # Set OpenVPN major mode
    41: dev tap0 # TUN/TAP virtual network device
  59. Linksys WRT300N v1, v1.1 (5,527 bytes)
    8: * Hardware Defaults (with Linksys firmware)
    13: * DD-WRT Defaults (dd-wrt.v24 beta)
    18: ==Installation Procedure==
    19: See [[Index:FAQ#Where_do_I_download_firmware.3F|Where do I d...
    31: # Log back into the router (router should have defaulted back to 192.168.1.1 user/pass admin)
  60. Wlan Repeater (9,054 bytes)
    11: This mode is NOT for WIRED connections between two routers!...
    13: ... Also, some other revisions or adjustments may be desirable, as stated below.
    17: You need to know the host router's access credentials:
    22: ... a RECENT STABLE BUILD!!! DO NOT USE THE RECOMMENDED BUILDS ON THE DD-WRT HOMEPAGE, those are outdate...
    23: ...*cable-connect your repeater-to-be to a laptop or desktop
  61. Linksys WRT54G2 v1.0 (18,535 bytes)
    6: https://wikidevi.com/wiki/Linksys_WRT54G2_v1.0
    10: Unlike most WRT54* models, the BCM5354 clock is locked and cannot be over...
    19: #Reset the router to defaults on the Linksys Admin page, then let it rebo...
    23: ...to the ''VxWorksKiller-G2V1-new.bin'', press Upgrade and wait 120 seconds for it to reboot itself
    26: #Run the downloaded ''tftp.exe'' (to avoid issues, open as administr...
  62. 安装 (16,991 bytes)
    1: {{Languages|Installation}}
    7: 请点击前往'''[[Supported Devices|支持设备]]'''查看 DD-WRT 支持的设...
    9: 建议您参考[[Index:Support|索引:支持]],了解如何请求您...
    13: ...fy your hardware and not create a problem that renders your router useless.
    15: ...uding instructions), and figuring out the correct installation procedures.
  63. 硬件专用信息 (4,351 bytes)
    2: ...?t=51486], use this page to identify your modem model correctly, and use the dd-wrt download search pa...
    6: ...rdware-specific]] explanations. This has been condensed from a longer form into individual instructio...
    10: ...shing]] Page. (Use only the MR3202A binaries provided, instead of the Fonera ones).
    17: ==[[:Category:Asus guides|Asus]]==
    20: *[[Asus WL-500g Deluxe|Asus WL-500G Deluxe]]
  64. LED Scripts (36,496 bytes)
    1: ...here: '''[[Main_Page|DD-WRT wiki mainpage]] / [[Index:Scripting|Scripting]] / LED Scripts
    9: ...ol which LED's on Broadcom devices see [[Broadcom_detection#We_finally_installed_DD-WRT_but_no_button....
    52: This is for the WRTSL54GS model only.
    67: see the [https://dd-wrt.com/wiki/index.php/Linksys_WRT1900AC#LEDs_and_GPIO_pins WRT1900...
    155: 13 Mode Button 00 Pressed
  65. Networking 101 for Dummies (5,653 bytes)
    4: == Definitions: ==
    5: ...des IP settings (ip address, mask, gateway...) to devices on the LAN/VLAN, that are setup to receive a...
    7: ...WAY]]:''' A GATEWAY is a router that connects the devices on a subnet to the internet. You should only...
    9: ...h an outside contract arrangement.) ISPs may provide other services such as remotely storing data file...
    11: ... "." - also called dotted decimal notation. Every device on a network has to have its own IP address. ...
  66. 简体中文 (1,977 bytes)
    7: ..."width:48px;"|{{Click || image=install.jpg | link=Installation | width=48px | height=48px }}
    10: |{{Click || image=FAQ.jpg | link=Index:FAQ | width=48px | height=48px }}
    12: |{{Click || image=support.jpg | link=Index:Support | width=48px | height=48px }}
    15: |{{Click || image=Konsole.png | link=Index:Scripting| width=48px | height=48px }}
    16: |'''[[Index:Scripting/zh_cn|脚本]]''' <br/> 脚本编写...
  67. Main Page (1,889 bytes)
    7: ..."width:48px;"|{{Click || image=install.jpg | link=Installation | width=48px | height=48px }}
    8: |'''[[Installation|Install]]''' <br/> Installing DD-WRT
    10: |{{Click || image=FAQ.jpg | link=Index:FAQ | width=48px | height=48px }}
    11: |'''[[Index:FAQ|FAQ]]''' <br/> Frequently Asked Questions
    12: |{{Click || image=support.jpg | link=Index:Support | width=48px | height=48px }}
  68. Installation/fr (33,903 bytes)
    1: {{Languages|Installation}}
    2: ...teur -s'il est compatible avec DD-WRT - ainsi que des informations qui s'appliquent à tous les routeu...
    4: ==Choisir le bon logiciel embarqué - '''De la plus haute importance'''==
    6: En premier lieu, consultez la base de données : http://www.dd-wrt.com/site/support/ro...
    10: ...vous à la page du wiki intitulée '''[[Supported Devices| Matériels compatibles]]'''.
  69. Optware, the Right Way (36,809 bytes)
    6: .../Entware-for-kernel-3x/Entware-ng-3x/wiki/General-installation-notes Entware on DD-WRT for K3X, both Atheros (mi...
    9: ...e looking for OTRW2 [http://www.dd-wrt.com/wiki/index.php/OTRW2_%28Optware_the_right_way_Take_2%29 ple...
    18: * All [http://www.desipro.de/ddwrt/K26/ Kong builds] based on Kernel 2.6
    25: ... enable Optware on your Router. It is '''recommended''' that you have a router with USB capable stora...
    34: Default Services that will be installed:
  70. LaFonera Software Heartbeat-dev (11,355 bytes)
    2: ...ttp://www.krikkit.net) and wildblue (www.wildblue.de)
    5: ==Installation==
    22: /usr/bin/wget http://www.wildblue.de/fonera/heartbeat/key
    23: /usr/bin/wget http://www.wildblue.de/fonera/heartbeat/simthefon
    24: /usr/bin/wget http://www.wildblue.de/fonera/heartbeat/known_hosts
  71. WHR-HP-AG108 (13,246 bytes)
    17: - Antenna detachable (reverse-sma) <br>
    20: ...fcc.gov/oetcf/eas/reports/ViewExhibitReport.cfm?mode=Exhibits&RequestTimeout=500&calledFromFrame=N&app...
    23: Even though this device is called "high-powered" its reach is disappo...
    25: ==Installation/Recovery==
    47: Create a directory on your desktop for the root.fs, lzma_vmlinuz, and RedBoot_c...
  72. Buffalo (19,777 bytes)
    2: ...t=51486], use this page to identify your router model correctly, and see [[Firmware_FAQ#Where_do_I_dow...
    6: '''NOTE:''' For some models you can use the [[ddadder]] program.
    8: ... First-time-flashing for 'store-bought' Buffalo models===
    11: ...asy to bypass this on most models (see specific models below for exceptions):
    12: # Read the peacock announcement so that you understand about flashing and broadcom builds: http://...
  73. DDNS - Alternate way to manage multiple DDNS accounts using updatedd - HOWTO (3,017 bytes)
    2: ...d its working great with ods.org services. I decided to write down this alternate method of doing DDN...
    15: ...formation on updatedd: http://www.philipp-benner.de/updatedd/
    19: ...This howto requires [http://www.dd-wrt.com/wiki/index.php/Optware Optware] installed
    24: == Installation ==
    29: ...odify the software to work with Optware running under /opt directory:
  74. How to configure DD-WRT, Chillispot, Apache2, FreeRadius, freeradius-dialupadmin, and MySQL on Debian 4.0 (38,957 bytes)
    2: FreeRadius, freeradius-dialupadmin, and MySQL on Debian 4.0</H1>
    4: configure the above apps in order to create a hotspot. Also, I will
    11: ...FONT SIZE=4><B>Requirements (most of these are in Debian's
    38: <LI><P>Click on &ldquo;Setup&rdquo;, under &ldquo;Basic Setup&rdquo;.
    39: In the DHCP setting, deselect &ldquo;DHCP-Authoritative&rdquo;.
  75. PC-Engines (12,674 bytes)
    4: ...National Semiconductor chips. AMD bought the CPU devision some years ago and relabled the CPU's. <br>
    6: =Installation=
    13: *CF-cardreader
    22: dd if=/*serial.image of=/dev/"media"
    25: *x86 webupgrade version if dd-wrt is already running
  76. TFTP flash (14,758 bytes)
    5: ...ial flash '''or''' a TFTP recovery flash for your device.
    8: ...ices]], the device wiki, or the forum for recommended files.
    10: ... possible) or ''micro'' build for 2&nbsp;MB flash devices
    11: ...then start a continuous ping (''-t'' switch is needed for this in Windows) to the router
    13: #*TTL=64 means application code has been reached. If the router isn't responding,...
  77. Italian (1,683 bytes)
    7: ..."width:48px;"|{{Click || image=install.jpg | link=Installation | width=48px | height=48px }}
    8: |'''[[Installation/it|Installazione]]''' <br/> Installazione DD-WRT
    10: |{{Click || image=FAQ.jpg | link=Index:FAQ | width=48px | height=48px }}
    11: |'''[[Index:FAQ|FAQ]]''' <br/> Frequently Asked Questions
    12: |{{Click || image=support.jpg | link=Index:Support | width=48px | height=48px }}
  78. Gateworks Avila GW234x (30,744 bytes)
    5: All '''developer team''' for this great firmware.
    7: Gateworks for this device.
    16: ...rver''' and '''telnet''' packages (and their dependences) and copied '''zImage''' and '''root.fs''' to...
    20: # default: off
    21: # description: The tftp server serves files using the ...
  79. Linksys WRT1900AC (7,146 bytes)
    2: ...uctions have only been tested on the [https://wikidevi.com/wiki/Linksys_WRT1900AC_v1 Linksys WRT1900AC...
    4: .../Linksys_WRT1900ACS WRT1900ACS], and [https://wikidevi.com/wiki/Linksys_WRT3200ACM WRT3200ACM] and oth...
    7: ...[Installation#Method_1:_Flashing_with_Web_GUI|GUI Installation]] wiki and [https://forum.dd-wrt.com/phpBB2/viewt...
    8: ... do I download firmware?]] for download links and details.
    9: #Go to the appropriate model build directory:
  80. Linksys (2,573 bytes)
    2: ...t=51486], use this page to identify your router model correctly, and use the dd-wrt download search pa...
    4: ...g a device, the only that should be hooked to the device is the computer and power.'''
    10: '''[[Linksys Serial numbers|Identifying Hardware Versions]]'''<br>
    66: [[Category:Linksys guides| ]]
  81. Reverse Proxy using Entware (5,257 bytes)
    7: *nas: storage device used to keep files accessible through http we...
    8: ...me automation: web interface to control your home devices, lights and heating
    9: *dev service: imagine you are a developer working on an api and you want it to be ac...
    11: By default all of those services are listening on port ...
    13: #change the default port of home automation and dev with this configuration
  82. Netgear R6400v1 (2,598 bytes)
    5: ==Hardware [http://techinfodepot.shoutwiki.com/wiki/Netgear_R6400_v1 Specs]==
    6: The hardware is almost identical to a Netgear R6300v2, but has external ante...
    7: {| border="1" cellspacing="0"
    42: ==Installation==
    43: ...lds may also be used. (K3-AC-ARM folder). See [[Index:FAQ#Where_do_I_download_firmware.3F|Where do I d...
  83. Netgear R7000P (2,507 bytes)
    1: ==Hardware [http://techinfodepot.shoutwiki.com/wiki/Netgear_R7000P Specificatio...
    2: {| border="1" cellspacing="0"
    49: |4-pin header, internal, 3.3V TTL
    53: ==Installation==
    54: ...30/30 reset ARM routers!''' Use the GUI ''Factory Defaults'' reset.
  84. Asus RT-AC56U (3,895 bytes)
    1: =[https://wikidevi.com/wiki/ASUS_RT-AC56U Hardware] Specifications...
    17: ===[https://wikidevi.com/wiki/ASUS_RT-AC56S RT-AC56S]===
    18: ...There is no evidence that it is supported at all, despite the FCC ID being listed as MSQ-RTAC56UA (CPU...
    22: ...this isn't a recommendation. New build links: [[Index:FAQ#Where_do_I_download_firmware.3F|here]].<br>
    23: ...20Models supports] the AC56U: [http://www.desipro.de/ddwrt/K3-AC-Arm/ dd-wrt.v24-K3_AC_ARM_STD.bin]
  85. Installing Entware (6,034 bytes)
    6: ...y outdated Optware packages. Within five years of development several Entware forks were born to run o...
    10: ...s, it will be added to the repo. Be ready to provide feedback about the package you requested.
    19: #Determine the architecture of the router you are usi...
    24: #:Make a note of this for later. If you can't determine the architecture to use, ask in the forums...
    28: ==Installation==
  86. TFTP Flashing a Belkin F5D7230 (4,413 bytes)
    5: ...'''mini'''. v.1223uk also has 4Mb flash. Later models, including v1444, have 2MB of flash and can onl...
    13: ...ry, try again. It took me dozens of attempts to identify this point in the boot process.
    14: ...tle bash script - it uses a sub-second ping time delay before starting atftp [[triggertftp]]
    22: ...'s network card is active in time to catch the golden TFTP moment. Also, remember that installing DD-...
    24: ...back in, wait a split second before clicking upgrade. It might take a few tries but it works.
  87. Hard reset or 30/30/30 (5,230 bytes)
    4: ...:95%;margin-top:+.7em;background-color:#EFEFFF;border:2px dotted #f00;text-align:left"
    9: ...upgrading!<br>Wait a couple of minutes after upgrade is complete and the router has rebooted itself.</...
    14: ...:95%;margin-top:+.7em;background-color:#EFEFFF;border:2px dotted #f00;text-align:left"
    24: ...:95%;margin-top:+.7em;background-color:#EFEFFF;border:2px dotted #f00;text-align:left"
    37: ..., ex: Asus N66U, this will put them in recovery mode instead.'''
  88. Asus WL-520GU (19,455 bytes)
    9: ...ng|Xbox-KAID]] have been removed in order to provide sufficient space for the USB drivers/modules and ...
    16: ...th certain applications; albeit those mainly include resource intensive Optware programs like Bittorre...
    21: ...ead] about a clock timing bug that affects this model.
    25: ...asus.com/download/download.aspx?SLanguage=en-us&model=WL-520GU ASUS Firmware Restoration Utility]
    26: ...reless router utility program" and is available under "Utilities"
  89. Linksys WAP54G (10,094 bytes)
    5: =Installation=
    6: ...tructions to assist you with creating a DD-WRT-loaded WAP unit. LOAD AT YOUR OWN RISK.</div>
    8: Hard reset does not work on this device, so it is not possible to clear NVRAM using t...
    26: ...ou do a hard reset (like when doing firmware upgrades).
    50: ... will have its own MAC addresses permanently embedded and will show every time you boot.
  90. Easy torrenting with dd-wrt (5,628 bytes)
    11: It includes a built-in web server so that users can control ...
    13: ...entially influencing which files are being downloaded first.
    15: ..., blocklists for bad peers, bandwidth limits dependent on time-of-day, globally or per-torrent, and ha...
    19: ...RT builds starting from March 2019 have new and modern way of downloading and managing torrеnts with ...
    20: ...clicks, no need for [[Transmission_daemon|optware installation]] or [[Installing_Entware|Entware]].
  91. X86 (8,106 bytes)
    3: ...lso existing very small low power industrial embedded PC plattforms e.g. the very popular [[PC-Engines...
    19: === More Storage on your Boot Device ===
    21: There is free space on the installation image in partition 3.
    23: Partition 3 is mounted Read-Only at boot by default.<br>
    27: /dev/discs/disc1/part3 on /usr/local type ext2 (ro)
  92. Netgear WGR614 v8.0 & WGR614L (7,509 bytes)
    5: ...geably. Please note that to load firmware on this device it must be first recompiled in Linux! If you ...
    12: ...builds if you like. The 'NoKaid' build is recommended.
    15: ...com. Flash from web interface. Reset to factory defaults after flashing and then reboot it again jus...
    17: ...and it crashes after a few reboots. This process defaults the machine and you are back to your curren...
    19: '''Basic Guide to Flashing (Must Use .CHK Version of The Firmwar...
  93. Linksys WRT54GL (7,178 bytes)
    2: <font color=red><b>To find other WRT54* model wiki pages see [[Linksys_WRT54G/GL/GS/GX|here]]....
    6: =Hardware [https://wikidevi.com/wiki/Linksys_WRT54GL_v1.1 Specifications]=
    10: **Use `cat /proc/cpuinfo` to verify BogoMIPS. Default output:
    14: cpu model : BCM3302 V0.8
    21: **NOTE: (26 Sep 2009) Non-removable molded antennas may have been used in the past a year o...
  94. Sshfs (5,291 bytes)
    9: Since Dropbear (the default ssh server) apparently does not support sshf...
    11: ...Note from Manuel: I managed to use sshfs with the default ssh by installing the "openssh-sftp-server" ...
    16: ...f you do not actually have a use for Samba's bewildering array of configuration options. If you know h...
    24: ... you're currently ssh'ed into the box, log out. Under 'Services' disable SSHd and enable telnet, save ...
    32: ...have an sshfs package installed (on my Arch Linux installation it is simply installing 'sshfs') and to make a lo...
  95. Netgear WAG 102 (7,486 bytes)
    34: n netif - print network interface device address<br>
    35: $dev(0,procnum)host:/file h=# e=# b=# g=# u=usr [pw=p...
    36: boot device: tffs=drive,removable file name: /tffs0/v...
    45: available boot devices: Enhanced Network Devices ae0 tffs
    52: boot device : tffs:
  96. SENAO EOC-2610 (2,810 bytes)
    25: ...hat the correct state of the settings is REV dependent.
    35: To over come this you can solder RP-SMA connectors onto the internal plugs.
    38: =Installation via backdoor=
    42: 2. Create a folder C:\test
    46: This image contains DD-WRT firmware; once loaded no additional porting is required.
  97. Advanced wireless settings/ja (51,292 bytes)
    20: ...entication. For Shared Key authentication, the sender and recipient use a WEP key for authentication. ...
    26: The following steps occur when two devices use Shared Key Authentication: # The client ...
    28: ... The client uses its configured 64-bit or 128-bit default key to encrypt the challenge text, and it se...
    29: ...ted text with the original challenge text. If the decrypted text matches the original challenge text, ...
    34: If the decrypted text does not match the original challenge...
  98. HDsamba2 (25,237 bytes)
    4: ...and use your DD-WRT router as a Samba2 USB HD NAS device.
    6: All you need to do is to setup a few pre-install details, run the install script and HDsamba2 will do...
    14: ... all other script based methods of unmounting USB devices. Testing has shown that the Reboot Button in...
    16: ...anly unmount the drive... but the Reboot Button under Administration, DOES NOT UNMOUNT THE USB DRIVE b...
    23: ...he tracker, and I hope this minor change can be made to avoid confusion for those wanting a simple USB...
  99. Actiontec MI424WR (12,063 bytes)
    18: Since the stock ROM and Jungo loader will not allow us to upload the DD-WRT directly,...
    21: ...o-image.py] that will interface with the Jungo Loader to perform backup of the orig flash content and ...
    24: ... "mi424wr" in the input search field. Select the desired linux.bin and place it in your TFTP server.
    25: # At this point you have downloaded all the files you need to and Internet connectio...
    26: # Reset the router to factory default by holding down the reset button for 10 seco...
  100. VPN (the easy way) v24+ (38,045 bytes)
    3: ...penVPN Server on DD-WRT and his clients on either Desktop PCs or another DD-WRT box.
    11: ... other routers, use the appropriate bin files and installation procedure, as per the DD-WRT website.
    13: ...re detailed instructions on this for example at [[Installation]].
    20: ...out 5200 bytes available in NVRAM on the server-side before you push SAVE in the web-GUI,''' or you mi...
    21: ...out 6000 bytes available in NVRAM on the server-side.
  101. Asus TFTP Flash (17,505 bytes)
    1: ... WL-500 series a few extra steps are available/needed when you do the initial flashing of your Asus WL...
    3: ... this Asus specific TFTP Flashing page has been made.
    15: :: tftp client is enabled in the default installation of WinXP
    22: ::Quick user guide:
    29: ...32.jounin.net/tftpd32_download.html Tftpd32] includes TFTP client as well as DHCP, TFTP, SNTP and Sysl...
  102. HDsamba2 update to samba3 (3,225 bytes)
    1: '''Update a HDsamba2 installation from using Samba2 to using Samba3'''
    28: ...it without BusyBox). The version is displayed immedeatly following your password input when you log in...
    59: Module '/opt/lib/charset/CP850.so' loaded
    60: Loaded services file OK.
    62: Press enter to see a dump of your service definitions
  103. Asus WL500-- old descriptions (33,699 bytes)
    1: This is the old /but working) descriptions of how to do the initial install of DD-...
    3: .../options available in the main list of install guides.
    10: ...led <b>Eng_1380.zip</b> (Use unzip application to decompress).
    14: ...e '''standard''' variant of DD-WRT. It should be identical with the '''Asus WL500G (Original)'''
    21: # This causes it to go into <b>Restore mode</b>. This is indicated by the <b>PWR</b> LED flas...
  104. Linksys WRT310N v1.0 (3,575 bytes)
    1: ==Installation Procedure==
    3: ...pensive brick! Flashing a virgin WRT310N with the default Linksys firmware will usually require a spec...
    5: ...has the OLDER firmware '''WRT310N_1.0.10_002_US_code''' on it, you should flash a mini generic version...
    20: ...o the administration tab. Click on firmware upgrade.
    21: ...o the dd-wrt.v24_mini_wrt310n.bin file you downloaded.
  105. D-Link DIR-600vB / 300vB (8,588 bytes)
    12: ...ple on the bottom of the box, underneath the barcode. '''"H/W Ver.: B5 F/W Ver.: 2.10" is not support...
    14: The factory default IP for this router is 192.168.0.1, user is "...
    21: ...sh or mistakenly erase. The ROM contains a bootloader and emergency room web page to recover flash fir...
    24: ... ). It does however support [[Repeater Bridge]] mode, which is similar, but a bit more complicated to ...
    26: ...ntly the only build from BrainSlayer doesn't include JFFS/CIFS client support.
  106. Asus RT-N16 (18,388 bytes)
    7: ==[https://wikidevi.com/wiki/ASUS_RT-N16 Hardware] Specifications==
    8: {| border="1" cellspacing="0"
    33: |3 x external detachable 2dBi antennas
    53: ...'' in a terminal (like puTTY) to get the full CPU details.
    56: ...6 along with the location for the ''[[JTAG]]'' headers.]]
  107. Samba3 (8,119 bytes)
    1: ...with files of size >2Gb and <4Gb] and has no unicode support, you may want to use samba3. It is more r...
    3: ...t located in the forums if you want an all in one installation!'''
    7: Based on [http://www.dd-wrt.com/wiki/index.php/HDsamba2_update_to_samba3 HDsamba2 update to...
    17: * Install [http://www.dd-wrt.com/wiki/index.php/Optware%2C_the_Right_Way Frater's Optware th...
    19: ... a portable Telnet/SSH program that does NOT need installation.
  108. Linksys WRT54G v8.0 & v8.2 (13,745 bytes)
    1: ...g a device, the only that should be hooked to the device is the computer and power.'''<br>
    6: ...vice, the only thing that should be hooked to the device is the computer and power.'''<br>
    9: ...se considerable frustration, loss of time, and render your router absolutely useless (bricked). In ot...
    10: ...30/30/30]] and Tftp [http://www.dd-wrt.com/wiki/index.php/Tftp_flash]. These may have some sections i...
    11: ...tion on the wiki. Come back here for the best guide for your router.
  109. Linksys WRT320N v1.0 (5,744 bytes)
    3: Device forum thread, for more information: [http://w...
    5: ===[https://wikidevi.com/wiki/Linksys_WRT320N_v1 Hardware] Specs===
    17: ... hard reset doesn't work, and boot_wait is off by default. In DD-WRT, the reset button works, and boo...
    19: == Installation instructions ==
    20: *For initial flash, a trailed build (with the model in the file name) is '''required''': [https://do...
  110. Грабим потоковое радио -)) в mp3 acc или ретранслируем (YoZz edition) (6,837 bytes)
    5: Access denied
    7: Access denied
    34: upgrade Upgrade all installed packages to latest version
    35: ...g> Download and install <pkg> (and dependencies)
    43: ...st List available packages and descriptions
  111. Asus RT-N12 (9,514 bytes)
    2: ...s://wikidevi.com/wiki/ASUS_RT-N12_series RT-N12 models] (and FCC ID):
    3: {| border="1" cellspacing="0"
    29: ...it may enter an infinite reboot loop. Recovery mode may be possible to fix it.
    31: ====Recovery Mode====
    32: ...68.1.1. The router is now in Recovery or Rescue mode.
  112. Hardware-specific (5,997 bytes)
    2: ...t=51486], use this page to identify your router model correctly.
    6: ... '''If your router is not in the list below''', [[Installation#Hardware-specific|be sure to check the other page...
    10: ...shing]] Page. (Use only the MR3202A binaries provided, instead of the Fonera ones).
    17: ==[[:Category:Asus guides|Asus]]==
    20: * [[Asus WL-500g Deluxe|Asus WL-500G Deluxe]]
  113. Linksys WTR54GS (572 bytes)
    21: ==Installation==
  114. Asus (1,418 bytes)
    2: ...t=51486], use this page to identify your router model correctly, and use the dd-wrt download search pa...
    7: * [[Asus WL-500g Deluxe|Asus WL-500G Deluxe]]
    8: ...remium specific wiki page ([[Asus WL-500g Premium de|in german]]) ([[Asus WL-500g * Premium En|in engl...
    30: [[Category:Asus guides| ]]
  115. Netgear WGR614v8/L/WW (4,579 bytes)
    1: ...irmware is done though Netgear update GUI using a device specific .chk file
    3: ...n11600) any generic .bin file can be used to upgrade firmware to the router using the DD-WRT Firmware ...
    5: These are the notes provided by Eko.
    14: *For upgrade when already running DD-WRT (IMPORTANT!):
    18: you can upgrade to any build listed below.
  116. Belkin (1,073 bytes)
    1: ...t=51486], use this page to identify your router model correctly, and use the dd-wrt download search pa...
    6: *[[Belkin F5D7230-4 v2000,v2000de + Belkin F5D7231-4 v1102,v1003ee, and v1103uk]]
    10: [[Category:Belkin guides ]]
    12: ...ow version has its default IP 192.168.2.225, I loaded DD-WRT micro successfully, later crashed and fou...
  117. MyPage (36,169 bytes)
    13: ... font-weight:bold;">This wiki page is currently under construction to reflect changes upcoming with Ve...
    14: ...r:#b40404; font-weight:bold;">Be careful and consider things written/showed here can differ from the c...
    15: ... font-weight:bold;">This info will be immediately deleted after the official announcement was posted i...
    18: ...lor:#b40404; font-weight:bold;">Thanks for your understanding and I apologize for any inconvenience ca...
    24: ...o have the most useful Linux command executed inside a web page, just click one of this tabs and be ha...
  118. Linksys WRT610N v2.0 (8,789 bytes)
    5: <code>Router ModelLinksys E3000<br>
    7: ....107 #16360 Fri Oct 20 11:07:53 CEST 2017 mips</code><br>
    11: '''The device hardware is identical to a [[Linksys_E3000]].'''<br>
    14: Further reading: WikiDevi page: [https://wikidevi.com/wiki/Linksys_WRT610N_v2]<br>
    17: ...se again, the hardware is the same in the later model E3000 as the WRT610Nv2
  119. Netgear (1,143 bytes)
    1: ...ectly, and find the correct build in the betas folder [https://secure.dd-wrt.com/site/support/other-do...
    32: [[Category:Netgear guides| ]]
  120. Netgear WNDR3300 (18,151 bytes)
    3: == Hardware [https://wikidevi.com/wiki/Netgear_WNDR3300v1 Specifications]==
    20: Flash device: 0x400000 at 0x1c000000
    36: ...nwrtdocs/hardware/netgear/wndr3300 OpenWRT wiki]: detailed information
    42: ... use 14929 or later k2.4 builds (''broadcom/'' folder). Build download links are found in the [[Firmw...
    55: ... mean the refurb unit you bought from a link on a deal site is bad. Please review potential sections ...
  121. Ubiquiti (818 bytes)
    2: ...t=51486], use this page to identify your router model correctly, and use the dd-wrt download search pa...
    6: ...: [[Supported_Devices#Ubiquiti|Ubiquiti Supported Devices]]
  122. Gateworks (50 bytes)
    1: #REDIRECT [[Gateworks Avila/Cambria Installation]]
  123. ASUS RT-G32 (9,327 bytes)
    2: This is a step by step guide to flashing dd-wrt onto an ASUS RT-G32.
    11: ...[http://support.asus.com/download/download.aspx?model=RT-G32&os=17&SLanguage=en-us ASUS firmware]. I u...
    12: ...[http://support.asus.com/download/download.aspx?model=RT-G32&os=17&SLanguage=en-us ASUS Firmware Resto...
    13: * Network settings needed for ASUS flashing tool.
    24: ...dwrt firmware go to [http://www.dd-wrt.com/wiki/index.php/ASUS_RT-G32#Uninstall_old_ddwrt_firmware uni...
  124. Netgear R6400v2 (2,478 bytes)
    5: ==Hardware [http://techinfodepot.shoutwiki.com/wiki/Netgear_R6400_v2 Specs]==
    6: {| border="1" cellspacing="0"
    41: ==Installation==
    42: ...he webflash.bin file for DD-WRT upgrades. See [[Index:FAQ#Where_do_I_download_firmware.3F|Where do I d...
    51: ...?t=316399 Netgear R6400 v2 and R6700v3 Install Guide]
  125. Netgear R6700v3 (2,501 bytes)
    4: Nearly identical to Netgear R6400v2 but with the following c...
    5: * Reduce the Heatspreader's size from 226x127 to 196x90.
    7: {| border="1" cellspacing="0"
    42: ==Installation==
    46: KONG builds may also be used. (K3-AC-ARM folder)
  126. Netgear AC1450 (2,333 bytes)
    5: {| border="1" cellspacing="0"
    40: ==Installation==
    41: ...50 hardware has the same FCC ID as the v2. Kong added support for it (build 25139), use the ''netgear-...
    48: See [[Index:FAQ#Where_do_I_download_firmware.3F|Where do I d...
    50: ==DO NOT 30-30-30 Reset ARM Devices==
  127. Linksys WRT300N v2.0 (5,283 bytes)
    17: Reset the device to defaults.<br>
    19: ...ince the device has the Jungo loader installed by default we have to change it to Redboot to get DD-WR...
    21: You will need a lil [https://dev.openwrt.org/browser/trunk/scripts/flashing/jungo...
    23: ... Redboot itself. The latest version can be downloaded here: [http://davidkra.net/redboot-wrt300n-v2.bi...
    26: Installation of RedBoot can be accomplished with the jungo-ima...
  128. Linksys WRT54G2 v1.1 (2,119 bytes)
    3: ==[https://wikidevi.com/wiki/Linksys_WRT54G2_v1.1 Hardware] Specifi...
    17: ... added with build 12427: not recommended, see [[Index:FAQ#Where_do_I_download_firmware.3F|Where do I d...
    19: ==Installation==
    20: ...-r14929/linksys-wrt54g2v11/ linksys-wrt54g2v11 folder (14929)]: flashing.txt instructions for updating...
    22: ...an) disabled networking within the redboot bootloader (and also the partition management), we must rep...
  129. Linksys WRT310N v2.0 (4,578 bytes)
    1: ==Installation Procedure==
    4: ...are take some time to reference pages for similar devices)''
    6: ...2.6_'''mini_wrt310nv2'''.bin")<br>Current recommended release 14929 from the Peacock thread [ftp://dd-...
    9: ...2_K26 K26 Comparison Table]'''<br>Current recommended release 14929 files from the Peacock thread can ...
    11: ... THE STANDARD PROCESS FOR UPGRADING CISCO/LINKSYS DEVICES. THE STEPS BELOW NEED EDITING TO BE COMPLETE...
  130. Installation/it (26,523 bytes)
    1: {{Languages|Installation}}
    4: ...precisioni o parti incomplete. Se vuoi puoi provvedere tu stesso alla modifica, richiedi un account wi...
    7: Nello spirito del Wiki e dell'Open Source chiunque può collaborare a questo ...
    11: ... flashing. This article helps you determine which installation process is for you on your supported router, as w...
    15: ...ppo lungo, prova ad inserire una parte del codice del tuo router (Esempio : prima "D-Link", poi DAP, e...
  131. Firmware FAQ/zh cn (35,659 bytes)
    5: 我们为您准备了Wiki页面。 [[Supported Devices|支持的设备]]
    15: [[NEWD2 Support on some models | 在部分型号中需NEWD2支持]]
    34: ...this router. For more information see [[Supported Devices | 支持的设备]].
    38: ... fine but anything newer than that is not recommended. Any version above 4.0 does not have enough mem...
    44: ...vember, 2007, Buffalo is not shipping 802.11a/b/g devices in the United States (legal problem). [http:...
  132. 固件FAQ/zh cn (23,532 bytes)
    5: 我们刚刚在Wiki页面为您。 [[Supported Devices|支持的设备]]
    15: [[NEWD2 Support on some models | 维基页面兼容模式]]
    34: ...this router. For more information see [[Supported Devices | 支持的设备]].
    38: ... fine but anything newer than that is not recommended. Any version above 4.0 does not have enough mem...
    44: ...vember, 2007, Buffalo is not shipping 802.11a/b/g devices in the United States (legal problem). [http:...
  133. Hard reset or 30/30/30/zh cn (4,123 bytes)
    3: ...:95%;margin-top:+.7em;background-color:#EFEFFF;border:2px dotted #f00;text-align:left"
    8: ...upgrading!<br>Wait a couple of minutes after upgrade is complete and the router has rebooted itself.</...
    18: ...e will clear out the NVRAM and set dd-wrt back to default values:
    25: ...at this step can put Asus devices into recovery mode...see note below!)<br> 最后,还是'''继...
    27: ...ne BEFORE and AFTER every firmware upgrade/downgrade.<br> 这些操作应该在每次升级固件''...
  134. Asus RT-N10U (9,014 bytes)
    8: :OpenSSL Heartbleed fix is only added in changeset 23882.
    15: ...2018/08-30-2018-r36808/broadcom_K3X/ K3 R36808 folder link]
    17: ...roken for most routers, despite being the recommended build for many routers in the Router Database. S...
    32: =Installation Instructions=
    34: ...w.dd-wrt.com/phpBB2/viewtopic.php?t=52043 Recommended Firmwares]). You can also try K3X builds on this...
  135. Asus RT-N66U (14,289 bytes)
    4: ...owever, there is a built-in and robust Recovery Mode. The NVRAM issue has been resolved in newer CFE v...
    6: =Hardware [http://en.techinfodepot.shoutwiki.com/wiki/ASUS_RT-N66U Specifications...
    7: {| border="1" cellspacing="0"
    41: !Serial header
    46: ...< ') at powerup will put the N66U into recovery mode.
  136. Netgear WNDR3800 (3,414 bytes)
    5: {| border="1" cellspacing="0"
    38: ...than 1.0.0.16, then you will first need to downgrade to firmware no greater than 1.0.0.16 (from [http:...
    42: If you have a North American model, you will need this for the initial flash.
    44: ...r3800-factory_NA.img from the netgear-wndr3800 folder
    46: If you have an EU or Asia model, you will need this for the initial flash.
  137. OpenVPN/zh cn (61,835 bytes)
    22: [[Image:WRT-FIXED-SCREEN.jpg|thumb|Description]]
    27: ...keys and other information to the filesystem outside of NVRAM; e.g. if you have jffs enabled store you...
    34: - '''The scripts on section 3.3 "Server Mode with Certificates" were run in a WRT150N v1.1 wit...
    35: ...generic.bin on wrt54gs v1.0''' with full server mode with certificates.--[[User:Mutrax|mutrax]] 21:42,...
    44: ...wiki and the filenames in the config need to include the path. SSH into the router and check out the ...
  138. Chillispot/zh cn (27,773 bytes)
    2: <!-- Note to Chillispot Service Providers: -->
    18: ChilliSpot可用于单路由器,or extended with the use of external services to cover an en...
    26: ...pot工作的额外服务: [[Captive_Portal#Provider]]
    29: ...T uses an older version of chillispot. Chillispot development continued, and it is possible to load th...
    31: ...ova.org/wiki/index.php/CoovaChilli here]. It includes the most recent version of Chillispot, '''but re...
  139. OpenNTPD (11,749 bytes)
    6: :+ Development emphasis on security
    11: ''It is recommended that you know how to:''
    17: == Pre-Installation Setup ==
    19: Before you install ntpd you need to decide where to install it. Your basic choices are vola...
    26: == Installation ==
  140. Advanced wireless settings (50,383 bytes)
    5: ...ced Wireless Settings than the built in help provides. It was originally authored by Stephen Suley in ...
    15: '''Default Setting:''' Auto
    17: '''Recommended Setting:''' Auto
    20: ...entication. For Shared Key authentication, the sender and recipient use a WEP key for authentication. ...
    26: The following steps occur when two devices use Shared Key Authentication: # The client ...
  141. Asus WL-500g Premium En (13,154 bytes)
    2: [[Asus WL-500g Premium de|de]]
    6: ...ff, the router will crash 80% of time in client mode.
    12: ...07]. Unfortunately no known JTAG option on this model.
    21: ... strong impression. Switching loops should be avoided unconditionally (not WAN and LAN Switch on commo...
    23: ...s the base up a mini DD-WRT (which currently includes: dd-wrt.v23_sp2_mini) take, otherwise you have n...
  142. Asus WL-500g Premium de (14,302 bytes)
    7: ...ff, the router will crash 80% of time in client mode.
    13: ...07]. Unfortunately no known JTAG option on this model.
    20: ...k. Switching Loops sollten unbedingt vermieden werden (auch nicht WAN und LAN auf gemeinsamen Switch).
    21: USB, Samba und Drucker Support benötigen zum derzeitigen Stand Handarbeit.
    23: ...st und keine Module / Packages nachinstalliert werden können (mangels Speicherplatz).
  143. Frys FR-300RTR (4,107 bytes)
    3: The Frys FR-300RTR is basically a rebranded D-Link DIR-615 E1, except for $30. As of this wr...
    5: The factory default IP for this router is 192.168.0.1, user is "...
    14: ...risingly decent built-in firmware for something made by Fry's
    20: =Installation Instructions=
    28: ==Firmware Update/Emergency Room Flashing Guide==
  144. Installation/pt (9,236 bytes)
    1: {{Languages|Installation}}
    3: ...u roteador um dispositivo inútil. A instalação de programas num roteador, conhecidos como ''firmwar...
    4: ...dor suportado, bem como lhe dar sugestões acerca de roteadores e informação sobre como ''flashear''...
    8: ...sa. Ao longo do tempo, esperamos ver a tradução de todas as páginas. Enquanto isso, aproveite o que...
    10: ...slation process, and is currently incomplete. Besides, references to other articles or pages take you ...
  145. Netgear WNDR3700 (12,087 bytes)
    6: ... build, whether you use stock firmware or DD-WRT. Installation of DD-WRT is very simple and can be done in a few...
    9: ...EAR firmware to DD-WRT, or recovering from TFTP mode. factory_NA.img is the same except for North Amer...
    15: See [[Index:FAQ#Where_do_I_download_firmware.3F|Where do I d...
    17: Download DD-WRT for the WNDR3700 '''v1''' depending on the region you purchased your router fr...
    20: North America (NA): Go to the netgear-wndr3700 folder then download the wndr3700-factory_NA.img file
  146. Asus RT-N13U (27,544 bytes)
    4: ...com/wiki/index.php?title=Asus_RT-N13U#Third-party_Developer_FW firmware] (FW) images <b>with</b> the F...
    7: ...en scratches your back. (:^) These are covered in detail below. (Web cam on the horizon.)
    10: [http://www.dd-wrt.com/wiki/index.php/Asus_RT-N13U%2C_page_2 Click here for <b>Pag...
    16: ...t as-installed), it's a must for Optware and many device-hosted programs and USB-connected hardware.
    18: ...n made a guide (see [http://www.dd-wrt.com/wiki/index.php?title=Asus_RT-N13U#Automounting_ext3.2FFAT.2...
  147. D-Link DIR-825 (7,747 bytes)
    5: ...wireless connection that can handle multiple HD video streams throughout the house, while being backwa...
    9: {| border="1" cellspacing="0" style="width: 100%"
    52: =Installation Instructions=
    56: ... D-link firmware webflash interface, it is the hidden menu that
    60: ...: NA (North America), TW (Taiwan), or WW (World Wide, any place other than NA or TW) which can be foun...
  148. AutoAP/zh cn (11,622 bytes)
    4: ...Mode]],或 [[Wireless_Bridge | Client-Bridged Mode]]等模式。
    10: 。。。 [[Installation/zh_cn | flash your device]]<br>
    12: ...。。设置 [[UWR | 中继模式]], [[Client_Mode_Wireless | 客户端模式]] or [[Wireless_Bridge...
    33: :* [[Installation|Flash]] 固件刷入路由
    42: :* Make sure [[JFFS]] is enabled (disabled by default)
  149. D-Link DIR-615 rev D3 (4,639 bytes)
    3: ...ple on the bottom of the box, underneath the barcode). A similar sticker with the hardware version and...
    5: The factory default IP for this router is 192.168.0.1, user is "...
    10: ...airly new hardware (released in 2009?), so it's widely available for purchase new.
    18: =Installation Instructions=
    24: ...e?]] , and look for the dlink-dir615[revision] folder. There will be two files, "dir615[revision]-fact...
  150. Optware/zh cn (45,404 bytes)
    9: ...tp://kiel.kool.dk/ SD/MMC Card], [[USB]]) is provided for packages.
    11: ...s now depend on /opt/lib/uClibc.so and dynamic loader also in /opt/lib with separate /opt/etc/ld-opt.s...
    20: ...e or optware-devel meta package provides complete development toolchain for compiling programs on rout...
    22: ... non /jffs filesystem is available, it is recommended to unmount /jffs and then mount eg. mmc in place...
    27: ...mended are routers with USB support (Asus WL-500g Deluxe|Premium, Linksys WRTSL54GS).
  151. D-Link DIR-615 rev E3 (2,757 bytes)
    3: ...ple on the bottom of the box, underneath the barcode). A similar sticker with the hardware version and...
    5: The factory default IP for this router is 192.168.0.1, user is "...
    10: * Wide distribution, there are a lot of them around now,...
    17: =Installation Instructions=
    20: ...ructions]]. The file will be in dlink-dir615e3 folder. factory-to-firmware file first.
  152. 刷机 (18,444 bytes)
    1: {{Languages|Installation}}
    12: '''[[Supported_Devices|支持的设备]]'''列出了能够在 DD-WR...
    14: '''[[Known_incompatible_devices|已知的不兼容设备]]'''列出了'''不...
    27: ...''' information - instead of just going by what model you think you have - [[User:Clock|clock]].
    28: ...check the [[Hardware-specific]] page for links to detailed instructions that may indicate how many fil...
  153. Advanced wireless settings/zh cn (56,094 bytes)
    12: ...entication. For Shared Key authentication, the sender and recipient use a WEP key for authentication. ...
    16: The following steps occur when two devices use Shared Key Authentication:
    19: ... The client uses its configured 64-bit or 128-bit default key to encrypt the challenge text, and it se...
    20: ...ted text with the original challenge text. If the decrypted text matches the original challenge text, ...
    23: If the decrypted text does not match the original challenge...
  154. WHR-HP-G300N (1,846 bytes)
    14: ...supplied DD-WRT firmware installed by default. Older versions of the router are the same specificatio...
    18: == Initial Installation ==
    20: Buffalo now provide an official DD-WRT build direct from their own FT...
    22: ...mentation the new DD-WRT firmware is installed by default on the WHR-HP-G300N however mine had the ori...
    24: ...ed by default. A "User Friendly" firmware is included as optional.
  155. IPv6 setup Hurricane Electric Tunnel Broker (8,283 bytes)
    48: #logging settings (set to /dev/null for no logging)
    78: echo "User added addresses cleaned/checked" >> $STARTUP_SCRIPT_LO...
    87: WANIP=`wget $WAN_IP_SOURCE_ADDR -O - 2>/dev/null`
    90: echo "External IP detected as:" $WANIP >> $STARTUP_SCRIPT_LOG_FILE
    110: ip tunnel add he-ipv6 mode sit remote $SERVER_IP4_ADDR local $WANIP ttl 255
  156. Hosting Subversion Service on your router/de (2,451 bytes)
    9: == Installation ==
    10: Baue eine Verbindung mit dem SSH/Telnet Client deiner Wahl auf.
    12: Führe folgende Befehle aus:
    17: ...t, dass das SVN Packet erfolgreich installiert wurde.
    27: Nun sollte der Ordnerinhalt wie folgt aussehen (ls /mnt/subvers...
  157. Rtorrent rutorrent lighttpd (27,436 bytes)
    9: ...rapidserverz.co.uk/ here] before diving into this installation.
    11: #user:demo
    12: #pass:demo
    23: After all the installations are done, <br>
    32: .../.rtorrent.rc and enable/modify the options as needed. Remember to
  158. D-Link DIR-620 (1,829 bytes)
    1: '''This device is in state "Work in Progress".'''
    11: {| border="1" cellspacing="0"
    43: |YES, to solder out
    50: =Installation Instructions =
    51: ...[[Asus_RT-N13U]]'s images. N13U's images are uploaded via UART CLI by tftp client from tftp server on ...
  159. Japanese (2,133 bytes)
    7: ..."width:48px;"|{{Click || image=install.jpg | link=Installation | width=48px | height=48px }}
    8: |'''[[Installation?/Japanese|インストール]]''' <br/> DD-WRTの...
    10: |{{Click || image=FAQ.jpg | link=Index:FAQ | width=48px | height=48px }}
    11: |'''[[Index:FAQ/Japanese|FAQ]]''' <br/> よくある質問...
    12: |{{Click || image=support.jpg | link=Index:Support | width=48px | height=48px }}
  160. D-Link DIR-632 (11,027 bytes)
    5: ...RNET PORTS FOR UNLIMITED CONNECTIVITY TO ALL YOUR DEVICES'''
    7: ...l for providing wired Internet connectivity for video, music, photos, and documents.
    25: {| border="1" cellspacing="0"
    54: ...1x USB2.0, can connect to a USB hub, for more usb devices sharing.
    63: ...fcc.gov/oetcf/eas/reports/ViewExhibitReport.cfm?mode=Exhibits&RequestTimeout=500&calledFromFrame=N&app...
  161. Netgear WNDR3400 (8,173 bytes)
    7: ...om/phpBB2/viewtopic.php?t=153543&postdays=0&postorder=asc&start=0] It is located on myopenrouter here...
    19: {| border="1" cellspacing="0"
    51: = DD-WRT Installation =
    53: ...phpBB2/viewtopic.php?t=312321 33772], do not consider this a build recommendation.
    54: ...ory reset (recessed button on the back), and upgrade with the appropriate mini firmware above. If it c...
  162. Hotspot Chillispot (22,987 bytes)
    1: Copie de la version Anglaise
    9: * Provide a WiFi usage agreement, advertising or other neig...
    11: ...dwidth, up and down, hotspot-connected laptops or desktops can use.
    15: ChilliSpot can be used for single router, or extended with the use of external services to cover an en...
    17: ===Technical Description===
  163. Netgear WNR2000V2 (7,316 bytes)
    4: ===[http://en.techinfodepot.shoutwiki.com/wiki/Netgear_WNR2000v2 Specifica...
    5: {| border="1" cellspacing="0"
    53: =====[http://www.linksysinfo.org/index.php?threads/wnr2000v2-file-is-too-big-to-fit-in-...
    64: *The CFE vmlinuz loader times out when loading linux, so full build size...
    67: .../wikidevi.com/wiki/Netgear_WNR2000v2 VERSION 2] MODEL ONLY!''' For V3 see [[Netgear_WNR2000V3|HERE]].
  164. D-Link DIR-810L (5,047 bytes)
    5: ===[http://techinfodepot.shoutwiki.com/wiki/D-Link_DIR-810L_rev_A1 Spec...
    6: {| border="1" cellspacing="0"
    55: *[http://techinfodepot.shoutwiki.com/wiki/D-Link_DIR-810L_rev_B1 B1 r...
    61: ...the correct revision directory for the A1/B1/C1 models.'''
    62: ...the [[Firmware_FAQ|Firmware FAQ]], SoC forum, and device thread (see [[#Notes|Notes]])
  165. DD-WRTとは何ですか? (57,691 bytes)
    7: ...るビジネスモデルが[http://forum.bsr-clan.de/ftopic4612.html 進行している]ものの、...
    20: ...sysルータ WRT54G/GL/GS 又は他の[[Supported Devices|サポートされている]]ルータ
    22: ...ムウェアをインストールするため、[[Installation]]に記載された手順を実行してくださ...
    25: {| style="font-size: 100%; text-align:center;" border=1 cellspacing=0 cellpadding=3 class="wikitable s...
    36: ! [[:Category:Traffic moderation|Traffic<br>mode-<br>ration]]<br>incl.<br>[[QoS]]
  166. Index:FAQ/ja (48,920 bytes)
    5: ...ためのページがあります。[[Supported Devices]]
    12: ...pport on some models | Wiki page for compatible models]]
    20: ...B2/viewtopic.php?t=20095&highlight=linksys++flash Detailed Flash instructions: read posting by sigmaxi...
    25: ...ng procedure]]を実行した後、"firmware upgrade"オプションがそれ以降のリリースで...
    31: ...できません。追加の情報は[[Supported Devices]]を参照してください。
  167. Network traffic analysis with netflow and ntop (14,836 bytes)
    2: DD-WRT include the capability of running rflow, a Cisco [http://...
    21: ...r applications I had to change to 9996 to make my installation stable.
    34: ...Double-click this icon to open the OPENXTRA Commander. If the NTop Service plug-in is not started, cli...
    46: Click on ''"Add NetFlow Device".''
    48: ''NetFlow Device Name:'' Any name you like, I choose DD-WRT.<b...
  168. What is DD-WRT?/fr (53,667 bytes)
    1: {{Languages|À propos de DD-WRT}}
    3: ...ers based on a Broadcom or Atheros chip reference design.
    5: ...WRT was created directly from Sveasoft's software decision to start charging for their firmware, closi...
    7: ...n.de/ftopic4612.html drafted] by BrainSlayer in order to pay his salary, as this is his full time job.
    9: ... features not found in the OEM firmwares of these devices, or even the firmware available for purchase...
  169. Accueil/fr (2,049 bytes)
    7: ... propos de DD-WRT|À propos ]]''' <br/> À propos de DD-WRT
    8: ..."width:48px;"|{{Click || image=install.jpg | link=Installation | width=48px | height=48px }}
    9: ...tallation/fr|Installation]]''' <br/> Installation de DD-WRT
    11: |{{Click || image=FAQ.jpg | link=Index:FAQ | width=48px | height=48px }}
    13: |{{Click || image=support.jpg | link=Index:Support | width=48px | height=48px }}
  170. À propos de DD-WRT (56,213 bytes)
    2: ...e de routeurs ieee802.11a/b/g/h/n conçus autour de circuits intégrés Broadcom ou Atheros.
    4: ...éé suite à la décision de Sveasoft's software de commencer à faire payer leur produit, fermant ai...
    6: ...612.html à l'étude] par BrainSlayer dans le but de lui assurer un salaire, ceci étant son emploi à...
    8: ...st aussi dégagé des obligations d'activation et de traçage du produit mise en œuvre par Sveasoft .
    10: ...vail. Cependant, il existe maintenant un traçeur de bogue pour DD/WRT à cette adresse :'' [http://ww...
  171. Ancienne page d'accueil FR (22,581 bytes)
    1: ...élisme, faciliter le travail des traducteurs et des personnes assurant la mise à jour. Ceci est bie...
    9: =Description du projet=
    10: ...et est de créer une documentation technique et d'installation complète pour le firmware [http://www.dd-wrt.com...
    12: ...Wikis, celui-ci est maintenu par la collaboration de la communauté DD-WRT. Tous sont autorisés à é...
    15: ...tion de la bande passante, et le support logiciel des [http://kiel.kool.dk:27/ SD-Card].<br>
  172. TP-Link WA5210G (4,915 bytes)
    8: ...mator in case of our wrong actions and in case of device damage.
    11: ...2.168.1.254 - the address after reset TL-WA5210G, default address
    12: ...1.20 - address of the new NanoStation 2 device by default
    13: ...S 192.168.1.1 it is necessary to check that other devices of a network had no this address)
    15: ...eceive settings and the password on the device by default.
  173. Linksys EA6300 (1,995 bytes)
    1: ...dware] with an FCC/IC ID suffix of ''EA6400'' is identical to the EA6400: see [[Linksys EA6400]].
    2: '''This guide covers these very similar models: EA6200, EA6300 (with EA6300 ID), EA6350v1, & E...
    3: ...nksys_.28Wireless_a.2Fb.2Fg.2Fn.2Fac.29 Supported Devices wiki].<br>
    5: =Hardware [http://techinfodepot.shoutwiki.com/wiki/Linksys_EA6300_v0.1 Specifi...
    9: {| border="1" cellspacing="0"
  174. Linksys EA6700 (1,713 bytes)
    1: ...) and EA6500v2, but use their respective build folders for flashing.
    3: =Hardware [http://techinfodepot.shoutwiki.com/wiki/Linksys_EA6700 Specificatio...
    8: {| border="1" cellspacing="0"
    30: ...m BCM4360KMLG 2x2 802.11a/b/g/n/ac transceiver Unidentified 5 GHz amplifiers (x2)
    46: =Installation=
  175. Optware on K3-AC-ARM (14,147 bytes)
    7: ...brary was dropped by DD-WRT in favour of MUSL, rendering all previous packages that had been compiled ...
    9: == Developments ==
    21: ...se instructions were put together on build 27715, deriving input from a number of sources including ma...
    29: ...er DD-WRT. To give credit where it's due, the raw installation of opkg from the ipk is drawn from Kong's bootstr...
    33: wget -q -O- http://debian.keithdunnett.net/ddwrt/optware_setup | sh
  176. Optware on K3-AC-ARM/MRTG (5,864 bytes)
    2: ...-AC-ARM build 23460M or newer from http://desipro.de/ddwrt/K3-AC-Arm/
    5: ...gured and working as per http://dd-wrt.com/wiki/index.php?title=Optware_on_K3-AC-ARM
    12: ...usr/bin/perl|#!/opt/usr/bin/perl|" /opt/usr/bin/indexmaker
    18: ...out of the box (not configured for installation under /opt) so we need to tell it where to find the pe...
    22: to your startup commands, under Administration -> Commands.
  177. TP-Link TL-WR841nd v8 (1,868 bytes)
    5: ...e: [http://www.tp-link.com/en/support/download/?model=TL-WR841ND&version=V8 TP-Link Product Info]
    7: Technical spec from wikidevi: [https://wikidevi.com/wiki/TP-LINK_TL-WR841ND_v8.x TP-LINK_TL-WR8...
    11: == Installation Instructions ==
    13: ... in the '''tplink_tl-wr841ndv8''' folder. See [[Index:FAQ#Where_do_I_download_firmware.3F|Where do I d...
    15: ...nd [[Installation#Method_1:_Flashing_with_Web_GUI Installation - Web-GUI|here]].
  178. Netgear R7000 (4,483 bytes)
    2: ...more R7000 articles [http://www.dd-wrt.com/wiki/index.php/Category:R7000 here]<br>
    4: ==[https://wikidevi.com/wiki/Netgear_R7000 Hardware] Specifications...
    5: {| border="1" cellspacing="0"
    46: |4-pin header, internal, 3.3V TTL
    52: SFE accelerated NAT was added to DD-WRT since build 33006 (kernel 3.10+), whic...
  179. Asus RT-AC66U (10,604 bytes)
    2: ...://web.archive.org/web/20191020204146/https://wikidevi.com/wiki/ASUS_RT-AC66U Specs]=
    9: *Detachable antenna x 3
    19: Use the ''asus-rt-ac66u/'' folder for this router (hardware revision "A1").
    20: *For download locations and other info see [[Index:FAQ#Where_do_I_download_firmware.3F|Where do I d...
    21: *Research "New Build" and model/rev forum threads: do not blindly install a late...
  180. D-Link DIR-868L (6,643 bytes)
    3: ...ose looking to enjoy online gaming, multiple HD video streams, and fast file transfers – all with le...
    6: ...router-reviewed SmallNetBuilder.net] (https://wikidevi.com/wiki/D-Link_DIR-868L_rev_A1 Rev A1):
    7: {| border="1" cellspacing="0" style="width: 100%"
    30: =Installation Instructions=
    34: ...and '''dir868[rev a|b|c]-webflash.bin''' (see [[Index:FAQ#Where_do_I_download_firmware.3F|Where do I d...
  181. Netgear R6300v2 (9,244 bytes)
    3: ...6300v2 is an ARM device. '''DO NOT USE''' this guide for the MIPS [[Netgear_R6300|R6300 "v1"]].
    6: {| border="1" cellspacing="0"
    42: ...r (an ISP) puts out a custom R6300v2 unit with "Model: R6300v2" on the bottom and blue coloring on the...
    44: ... None of the below files seem to work in the upgrade process. For further information about updating ...
    47: {| border="1" cellspacing="0"
  182. Netgear WNDR4300 (5,843 bytes)
    4: ... build, whether you use stock firmware or DD-WRT. Installation of DD-WRT is very simple and can be done in a few...
    7: ...EAR firmware to DD-WRT, or recovering from TFTP mode. Webflash is from upgrading an existing DD-WRT fi...
    15: World Wide (WW): ftp://ftp.dd-wrt.com/betas/2014/02-04-2014-...
    19: Do not consider these build recommendations, check New Build thr...
    21: See [[Index:FAQ#Where_do_I_download_firmware.3F|Where do I d...
  183. Asus RT-AC88U (1,877 bytes)
    1: ==Hardware [http://techinfodepot.shoutwiki.com/wiki/ASUS_RT-AC88U Specification...
    7: *JTAG: yes, 5-pin header, unpopulated
    8: *Serial: yes, 4-pin header, unpopulated, internal, 3.3V TTL
    18: ==Installation==
    19: *Initial Flash: It is recommended to install the .trx build file with the ASUS Fir...
  184. TP-Link TL-WR841nd v9 (824 bytes)
    5: ...e: [http://www.tp-link.com/en/support/download/?model=TL-WR841ND&version=V8 TP-Link Product Info]
    7: Technical spec from wikidevi: [https://wikidevi.com/wiki/TP-LINK_TL-WR841ND_v9.x TP-LINK TL-WR8...
    11: == Installation Instructions ==
    13: ... most recent firmware builds can be downloaded as described on:
    17: ...nd [[Installation#Method_1:_Flashing_with_Web_GUI Installation - Web-GUI|here]].
  185. Asus T-Mobile Cellspot (7,185 bytes)
    1: ==CFE Downgrade is necessary to enable flashing firmware ==
    2: ...hat CFEs are able to control / deny firmware upgrades, which is the reason for 'downgrading' to firmwa...
    4: ....php?p=73690012&postcount=3895 ******Updated guide to CFE Mod ****** here but doesn't mention flashi...
    6: ...y way to change firmwares is to downgrade to an older TMobile firmware (1703 for example), enable Teln...
    8: ...lder 1703 firmware and all CFE's and utilities needed]
  186. Netgear R6300 (7,369 bytes)
    7: =Hardware [http://techinfodepot.shoutwiki.com/wiki/Netgear_R6300_v1 Specs v1]=
    8: {| border="1" cellspacing="0"
    10: | [http://techinfodepot.shoutwiki.com/wiki/Broadcom Broadcom BCM4706]
    45: ...uncement]''' for historical reference on Broadcom devices and related procedures).
    47: ===Initial DD-WRT Installation===
  187. Wireguard (8,731 bytes)
    6: ...iding the massive headache. It intends to be considerably more performant than OpenVPN.
    9: [[Image:QR-Code.PNG|thumbnail|Instructions]]
    12: [[Image:DecodeQRcode.PNG|thumbnail|Instructions]]
    26: ...asics of securely creating a tunnel from a client device to DD-WRT. Before proceeding, verify a workin...
    28: ==What is a QR Code?==
  188. Linksys EA6400 (6,619 bytes)
    1: ...rdware with an FCC/IC ID suffix of ''EA6400'' is identical to the EA6400, but uses '''''linksys-ea6300...
    3: =Hardware [http://techinfodepot.shoutwiki.com/wiki/Linksys_EA6400 Specificatio...
    6: EA6300 shown: models look otherwise identical.
    8: {| border="1" cellspacing="0"
    50: =Installation=
  189. TP Link Archer C9 (4,338 bytes)
    3: ==[https://wikidevi.com/wiki/TP-LINK_Archer_C9_v1.x Hardware] Speci...
    4: {| border="1" cellspacing="0"
    37: |internal, 4-pin header, 3.3V TTL
    63: The Archer C1900 is identical.<br>
    69: ...rcher-c9v1 directory''' from one of the links [[Index:FAQ#Where_do_I_download_firmware.3F|here]].
  190. Belkin Share Max N300 F7D7301 F7D3301 (1,352 bytes)
    7: {| border="1" cellspacing="0"
    46: =Installation=
    57: ...00''' bytes or you will brick the router. See [[Index:FAQ#Where_do_I_download_firmware.3F|Where do I d...
    59: [[Category:Belkin guides]]
  191. Linksys EA6900 (2,977 bytes)
    1: '''This guide is ''only'' for the EA6900 v1.x!'''<br>
    2: ...:</font> The EA6900 ''v2'' is a Mediatek MT7621AT device and not supported by DD-WRT!''' [[https://fcc...
    4: ==Hardware [http://techinfodepot.shoutwiki.com/wiki/Linksys_EA6900_v1.0 Specifi...
    5: ...parate DSL modem (APM105), appears to be the same device as [https://forum.dd-wrt.com/phpBB2/viewtopic...
    6: {| border="1" cellspacing="0"
  192. Linksys EA8500 (23,655 bytes)
    5: [https://wikidevi.com/wiki/Linksys_EA8500 Hardware Spec]
    8: ==Installation instructions==
    12: ...previous version”), the first step is to downgrade to stock firmware, e. g. 1.1.3.166845.
    15: ..._headers/0022102051| Molex KK 5ckt header] and solder it on.
    21: ...al setup. Read the README on http://www.desipro.de/ddwrt/K3-AC-IPQ806X/. Upload the Kong Build EA85...
  193. TP Link Archer C8 (4,409 bytes)
    1: ...ons] of the Archer C8, with v1 and v2 [[Supported_Devices#TP-Link|supported]] by DD-WRT.<br>
    4: ==[https://wikidevi.com/wiki/TP-LINK_Archer_C8_v1.x Hardware] Speci...
    5: {| border="1" cellspacing="0"
    35: |internal, 4-pin header, 3.3V TTL
    61: *The unsupported [https://wikidevi.com/wiki/TP-LINK_Archer_C8_v4.x v4] has 128 MiB...
  194. Firmware FAQ/ja (38,451 bytes)
    10: ...トされるデバイス]]や[[Known_incompatible_devices|既知の非互換デバイス]]に関する...
    22: ...はAmazonでも見つかります。[[Supported_Devices|サポートされるデバイス]]を見な...
    26: ...E ROUTER DATABASE</font>''': unless directed in a device wiki.
    27: *It does '''NOT''' have Recommended Builds, and the firmware build dates are not cor...
    40: ...ences to BS builds see Kong's [http://www.desipro.de/ddwrt/Readme.txt Readme])
  195. Установка (37,721 bytes)
    1: {{Languages|Installation}}
    13: ...D-WRT, см. на странице '''[[Supported Devices]]''' (англ. «Поддерживаемы...
    34: ...рживаемых устройств [[Supported Devices]], чтобы узнать минималь...
    74: #* [http://www.dd-wrt.com/wiki/index.php/Tftp_flash Инструкция по пер...
    77: ... по ссылке [http://www.dd-wrt.com/wiki/index.php/Tftp_flash Tftp_flash]).
  196. Netgear WNDR3700/ru (22,650 bytes)
    12: ...шивки устройств версии WorldWide из заводской прошивки Netgear ...
    24: World Wide (WW): перейдите в папку netgear-wn...
    45: World Wide (WW): перейдите в папку netgear-wn...
    73: ...те сброс 30/30/30, и сброс ''Factory Defaults'' через веб-интерфейс па...
    107: ...om/phpBB2/viewtopic.php?t=140667&postdays=0&postorder=asc&start=30
  197. Поддерживаемые устройства (224,289 bytes)
    1: {{Languages|Supported Devices}}
    13: ...дите на [https://forum.dd-wrt.com/phpBB2/index.php форум], чтобы прочитать ...
    25: ....com/site/support/router-detection Router Support Detection], чтобы узнать появится...
    63: ...ит определению, от англ. To Be Determined (может быть сделано в б...
    71: ...-align:center; position:relative; " width=100% border=1 cellspacing=0 class="wikitable"
  198. Asus RT-AC66U B1 (4,407 bytes)
    1: ... is a hardware revision of [[Asus_RT-AC66U]] that deviates significantly from the original "A1" revisi...
    2: ...://web.archive.org/web/20191020204404/https://wikidevi.com/wiki/ASUS_RT-AC66U_B1] =
    18: ...re stable. In general, the latest beta is recommended.
    25: = Firmware Installation =
    26: The latest Asus firmware prevents installation of third party firmware via the standard ASUS web...

View (previous 500) (next 500) (20 | 50 | 100 | 250 | 500).



Search in namespaces:

List redirects
Search for