Search results

From DD-WRT Wiki

You searched for Hardware/se

Jump to: navigation, search

For more information about searching DD-WRT Wiki, see Help.

Showing below up to 50 results starting with #1.


View (previous 50) (next 50) (20 | 50 | 100 | 250 | 500).

Article title matches

  1. Hardware (18,720 bytes)
    1: {{Languages|Hardware}}
    5: ...lled flash space is the place where the permanent settings are stored. This includes
    6: :* DD-WRT settings that you normally change using [[Web Interf...
    7: :* settings for user [[Startup Scripts]]
    14: ...content containing the pattern <search_pattern> (useful for quickly finding things in NVRAM):
  2. LaFonera Hardware serial to ethernet (1,034 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: .../ [[:Category:LaFonera_Hardware_(en)|Hardware]] / serial to ethernet'''
    5: == serial to ethernet ==
    6: There is a chance to turn LaFonera as a ''Rs232-Serial-port-to-wireless'' adapter?
    7: ...ia rs232 to the 2nd Fonera, by using a pc without serial port.
  3. LaFonera Hardware i2c (6,202 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / i2c'''
    8: ... router. And now, it’s done. Kernel module and user space programs are here.
    10: [[Image:LaFonera_Hardware_i2c_-_01_overview.jpg]]
    12: ... connector. Pin 1 and 2 are respectively used for sending and receiving SDA signals. 5 and 6, for SCL ...
  4. LaFonera Hardware Coloured Chassis (2,817 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Coloured Chassis'''
    15: [[image:LaFonera_Hardware_coloured_chassis.jpg]]
    18: ...ase-mods.linear1.org/category/painting/ linear1 case mods].
    22: ...ith some light reflecting from it (monitor & a mouse) to give an idea of the finish.
  5. LaFonera Hardware SD-Card (6,579 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / SD-Card'''
    11: ===Purpose===
    16: A kernel module is required in order to use the MMC hack.
    17: .../ OpenWRT] or compile [http://fghhgh.150m.com/ these] using the toolchain on your LaFonera.
  6. LaFonera Hardware Power-Sources (2,124 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Power-Sources'''
    9: You can even use a LiIon battery and a stepup circuit. (or power L...
    11: For those willing to take the LiIon approach, make sure you...
    14: To build my battery pack, I used an LM7805A, an external SCSI Zip 100 drive power...
  7. Linksys WAP54G Hardware Spec (3,039 bytes)
    4: Serial No: MDG0035...<br><br>
    5: Hardware spec:<br>
    28: * Several thin cabel
    37: ...er), and GND of the metal casing for the SES or Reset button.
    42: For this module I used gpio: 3,4,6 and 7
  8. LaFonera Info Hardware-Specifications (3,830 bytes)
    3: ...Fonera_(en)|LaFonera]] / [[LaFonera_Info|Info]] / Hardware-Specifications'''
    5: == The Hardware Specifications ==
    12: * Antenna Connector: RP-SMA Connector (Reverse SMA)
    17: * Reset Switch
    31: * No extra pad for a second antenna. Possible internal PCB antenna?
  9. LaFonera Hardware Second-Antenna (7,482 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: .../ [[:Category:LaFonera_Hardware_(en)|Hardware]] / Second-Antenna'''
    6: ...al.jpg|thumb|right|Stock la fonera PCB showing unused antenna connection.]]
    7: ...nd antenna is not hard. Since I recently used these wiki pages to help me along the process up gettin...
    9: The process should be pretty self explainitory, though I'm sure others may have o...
  10. LaFonera Hardware JTAG (268 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    4: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / JTAG'''
    7: For now take a look at [[LaFonera_Hardware_IO_(en)]]
  11. LaFonera Hardware USB (9,766 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / USB'''
    9: ...e page or whatever; I just put it here because I used a USB port in the mod. -->
    11: ...- This is just a method of using a USB port for a serial console, you still have to connect this port ...
    13: ..., so read this article first: [[LaFonera_Hardware_Serial-Cable-Port]].
  12. LaFonera Hardware Power-over-Ethernet (3,201 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Power-over-Ethernet'''
    8: ...10´s of euros each, but might be ideal in this case.
    12: ...t and component placement). This information is based on our experience with the SMC unit.''
    21: ...0m of CAT5. ''(It does run very hot and I'm surprised the box hasn't melted in our summer heat which e...
  13. LaFonera Hardware Serial-Cable-Port (6,917 bytes)
    1: [[Category:LaFonera_Hardware_(en)]]
    2: .../ [[:Category:LaFonera_Hardware_(en)|Hardware]] / Serial-Cable-Port'''
    4: ==Accessing serial console on the Fon==
    7: | [[Image:LaFonera_Hardware_Serial-Cable-Port_01.jpg]]
    8: ...al console you can turn SSH on and access various settings and reflash the firmware.'''
  14. LaFonera Hardware Disassembling (1,764 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...Category:LaFonera_Hardware_(en)|Hardware]] / Disassembling'''
    8: | [[Image:LaFonera Hardware Disassembling 01.png]]
    9: ...free routers to countries in europe. The router itself is tiny: it fits nicely in the palm of my hands...
    11: Included is a 5 v Ac/Dc converter and a simple user manual.
  15. LaFonera Hardware (49 bytes)
    1: #REDIRECT [[:Category:LaFonera_Hardware_(en)]]'''
  16. Hardware DIY (1,115 bytes)
    1: {{Languages|Hardware_DIY}}
    3: ==Hardware List==
    5: ...T wiki page for your particular router, in most cases.
    13: [[Category:Hardware]]
  17. LaFonera Hardware Cooling-System (11,159 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Cooling-System'''
    7: to prevent melting your LaFonera (see http://www.youtube.com/watch?v=CIZEh7gf7M0)
    12: So these things run pretty hot...
    13: ...oking forward to my case melting and destroying itself.
  18. LaFonera Hardware Controlling AC-Loads (4,663 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Controlling AC-Loads'''
    15: == Hardware ==
    18: [[image:LaFonera_Hardware_Controlling_AC-Loads_-_01_ready_to_start.jpg]]
    20: [[media:LaFonera_Hardware_Controlling_AC-Loads_-_highres_01_ready_to_start....
  19. LaFonera Hardware Roboter Controlling (2,339 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Roboter Controlling'''
    15: == Hardware ==
    18: [[image:LaFonera_Hardware_Roboter_Controlling_-_03_complete_robot_front.jpg...
    20: [[media:LaFonera_Hardware_Roboter_Controlling_-_highres_03_complete_robot_f...
  20. LaFonera Hardware Logo-Removal (2,569 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Logo-Removal'''
    5: ...a_Hardware_Logo-Removal_(de)|deutsch]] [[LaFonera_Hardware_Logo-Removal_(fr)|français]]
    20: # Logo will dissolve into polish - Use a fresh piece of kitchen paper if it becomes dark...
    23: # Clean up trace polish (or else it may degrade the plastic) using a damp kitchen ...
  21. LaFonera Hardware Replace LEDs (6,702 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Replace LEDs'''
    5: ...a_Hardware_Replace_LEDs_(de)|deutsch]] [[LaFonera_Hardware_Replace_LEDs_(fr)|français]]
    29: [[image:LaFonera_Hardware_Replace_LEDs_-_08_preparation.jpg]]
    31: [[media:LaFonera_Hardware_Replace_LEDs_-_highres_08_preparation.jpg|view in...
  22. LaFonera Hardware Logo-Removal (de) (2,955 bytes)
    2: [[Category:LaFonera_Hardware_(de)]]
    3: ...Fonera_(de)|LaFonera]] / [[LaFonera_Hardware_(de)|Hardware]] / Logo-Entfernung'''
    5: ...a_Hardware_Logo-Removal_(de)|deutsch]] [[LaFonera_Hardware_Logo-Removal_(fr)|français]]
    18: === Vorgehensweise ===
    22: ...' auch die Beschriftungen WLAN, LAN und POWER lassen sich entfernen. Du kannst die Beschriftungen mit...
  23. LaFonera Hardware Logo-Removal (fr) (2,529 bytes)
    2: [[Category:LaFonera_Hardware_(fr)]]
    3: ...Fonera_(fr)|LaFonera]] / [[LaFonera_Hardware_(fr)|Hardware]] / Logo-Removal'''
    5: ...a_Hardware_Logo-Removal_(de)|deutsch]] [[LaFonera_Hardware_Logo-Removal_(fr)|français]]
    20: # Logo will dissolve into polish - Use a fresh piece of kitchen paper if it is too stain...
    23: # Clean up trace polish (or else it may degrade the plastic) using a damp kitchen ...
  24. LaFonera Hardware (de) (46 bytes)
    1: #REDIRECT [[:Category:LaFonera_Hardware_(de)]]
  25. LaFonera Hardware (fr) (49 bytes)
    1: #REDIRECT [[:Category:LaFonera_Hardware_(fr)]]'''
  26. LaFonera Hardware 32MB SDRAM MOD (5,063 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / 32MB SDRAM MOD'''
    7: The Fonera uses 128 Mbit PC133 SDRAM arranged in 4 banks x 2 Mbi...
    11: ...d, I choose to go with SO-DIMM for notebooks because there are usually 8 chips rather than 16 chips.
    21: ... for the faint of heart and definitely not for those that have not done any kind of soldering before. ...
  27. LaFonera Hardware Replace LEDs (de) (6,319 bytes)
    1: [[Category:LaFonera_Hardware_(de)]]
    2: ...Fonera_(de)|LaFonera]] / [[LaFonera_Hardware_(de)|Hardware]] / Replace LEDs'''
    4: ...a_Hardware_Replace_LEDs_(de)|deutsch]] [[LaFonera_Hardware_Replace_LEDs_(fr)|français]]
    28: [[image:LaFonera_Hardware_Replace_LEDs_-_08_preparation.jpg]]
    30: [[media:LaFonera_Hardware_Replace_LEDs_-_highres_08_preparation.jpg|view in...
  28. LaFonera Hardware Replace LEDs (fr) (5,848 bytes)
    2: [[Category:LaFonera_Hardware_(fr)]]
    3: ...Fonera_(fr)|LaFonera]] / [[LaFonera_Hardware_(fr)|Hardware]] / Replace LEDs'''
    5: ...a_Hardware_Replace_LEDs_(de)|deutsch]] [[LaFonera_Hardware_Replace_LEDs_(fr)|français]]
    10: Presque tout dans mon environnement (mise à part mon amie) a des LEDs bleues: PC, enceinte...
    13: Je pense que c'est une modification très simple, si vous ...
  29. LaFonera Hardware Power from USB (8,045 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Power from USB'''
    6: ...ce to be able to take your LaFonera with you, to use as a portable access point, or to provide wireles...
    8: ...stable and crash. However, in my initial tests it seems to perform fine running only off a single USB ...
    14: These are the parts and tools I used.
  30. LaFonera Hardware New Paint Job (1,237 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / New Paint Job'''
    8: ...e then 2 Hours approximately including drying and second coat/gloss.
    35: Disassemble your Fonera
    40: ...per. After this is done you should be left with a semi rough surface perfect for the next step but bef...
  31. LaFonera Hardware IO (en) (4,576 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / IO'''
    7: ...2 and SW1 (and other test points, if they can be usefull to us.
    9: ...time to make a schmatic of the LaFonera yet? Please fill in the
    13: ...: http://wiki.openwrt.org/OpenWrtDocs/Customizing/Hardware/JTAG_Cable and here: http://tech.am/2006/10/06/au...
  32. LaFonera Hardware Modding (636 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Modding'''
    7: [[Image:LaFonera_Hardware_Modding_-_01_front.jpg]]
    9: [[Image:LaFonera_Hardware_Modding_-_02_side.jpg]]
    11: [[Image:LaFonera_Hardware_Modding_-_03_ahead.jpg]]
  33. Hardware-Specific/zh cn (32 bytes)
  34. Hardware-specific/zh cn (32 bytes)
  35. LaFonera hardware New Paint Job (45 bytes)
    1: #REDIRECT [[LaFonera Hardware New Paint Job]]
  36. LaFonera Hardware (en) (49 bytes)
    1: #REDIRECT [[:Category:LaFonera_Hardware_(en)]]'''
  37. LaFonera Hardware IO (39 bytes)
    1: #REDIRECT [[LaFonera Hardware IO (en)]]
  38. LaFonera Hardware Controlling AC-Loads via webinterface (4,497 bytes)
    1: [[Category:LaFonera_Hardware_(en)]]
    2: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Controlling AC-loads via web-interface'''
    11: == Uses ==
    17: * Open your house/garage door.
    31: : [[Image:LaFonera_Hardware_Controlling_AC-Loads_via_webinterface_-_04_overvi...
  39. LaFonera Hardware SD-Card/Reader Position (6,152 bytes)
    1: ...ry:LaFonera_Hardware_(en)|Hardware]] / [[LaFonera Hardware SD-Card|SD-Card]] / Reader Position'''
    9: * A Fonera (I used a v2100, I don't know if this will work with 220...
    10: ...ad both) card reader to take apart, or [[LaFonera_Hardware_SD-Card#Cheap_SD_Card_.22reader.22_.28floppy_cabl...
    13: * Strong Glue (epoxy resin or similar) OR Self adhesive plastic for a temporary solution.
    23: ...ders). Simply desolder the reader from the slot assembly from the PCB.
  40. LaFonera Hardware LCD Screen (3,119 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / LCD Screen'''
    9: [[Image:LaFonera_Hardware_LCD_Screen_-_01_fonera_LCD.jpg]]
    12: ...playing with IR receiver. So why not playing with serial 128*128 LCD ?
    14: ...CD 128*128 screen module come from 4D Systems and sell by Dontronics. My LCD module is not in product ...
  41. LaFonera Hardware IR Receiver (4,545 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / IR Receiver'''
    8: ...or as explained here. But this wont work with USB/serial adapter and it need a kernel module to direct...
    10: ...d with USB/serial and embedded system with simple serial port like… La Fonera.
    13: [[Image:LaFonera_Hardware_IR_Receiver_-_01_pcb.jpg]]
  42. LaFonera Hardware LaFoneraPlus (12,883 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / LaFoneraPlus'''
    7: ...nclude two ethernet interfaces. This can be very usefull for a lot of things. Can OpenWrt Kamikaze 7.0...
    10: [[image:LaFonera_Hardware_LaFoneraPlus_-_01_case.jpg]]
    15: [[image:LaFonera_Hardware_LaFoneraPlus_-_02_atheros_chip.jpg]]
  43. Hardware-specific (5,910 bytes)
    1: {{Languages|Hardware-specific}}
    3: ...formation. Please also see [[:Category:Networking hardware tutorials]] and [[Supported_Devices]] for links t...
    5: ...f the sections and links in this page will be revised for brevity and to reduce redundancy.''' (05/17/...
    7: =Hardware Brand=
    9: ...3202A: see [[LaFonera Software Flashing]] Page. (Use only the MR3202A binaries provided, instead of th...
  44. OpenVPN Router to Router Bridged Configuration Alternative (Hardware VPN) (5,716 bytes)
    1: ...uter to Router Bridged Configuration Alternative (Hardware VPN) ===
    2: (for hardware "like" vpn access for multiple computers or appli...
    6: This will allow for hardware like VPN access on the client side to more than o...
    9: *Internet Video box that is service and region limited
    11: ...le still using US services. So long as the DD-WRT server is in the US.
  45. Hardware DIY/ru (33 bytes)
  46. Hardware DIY/zh cn (541 bytes)
    1: {{Languages|Hardware_DIY}}
    5: * [[Serial port pinouts|串口引出线]]
    10: * [[WRT54GL MAX232 Serial |给WRT54G/GL添加串口芯片MAX232]]
    11: * [[:Category:LaFonera_Hardware_%28en%29|La Fonera的硬件摩丁部落]]
  47. Hardware/ru (2,765 bytes)
    1: {{Languages|Hardware}}
    11: nvram set <var_name>="<value>"
    29: nvram unset var_name
    39: nvram erase
    51: [[Category:Hardware/ru| ]]
  48. Hardware-specific/fr (567 bytes)
    1: {{Languages|Hardware-specific}}
    4: ...omplète''' en anglais cliquez sur ce lien : '''[[Hardware-specific]]'''
    8: La seule page traitant des spécificités matérielles ...

Page text matches

  1. DD-WRT Doku (DE) (83,042 bytes)
    8: Diese Wiki wurde schon lange nicht mehr aktualisiert. V...
    10: Die Community hat wahrscheinlich kein Interesse mehr an einer Deutschen-Wiki.
    15: it seems that the german community is not longer intere...
    19: ...tp://de.wikipedia.org/wiki/Artikel Artikel] verfassen, editieren und diskutieren.<br>
    25: ...//www.dd-wrt.com/wiki/index.php/Supported_Devices Hardware-Support-Liste]''.
  2. Hinzufügen eines SD-Kartenlesers an den Linksys WRT54G (20,102 bytes)
    1: == Tutorial: Hinzufügen eines SD-Kartenlesers an den Linksys WRT54G ==
    3: ...stoffersen - übersetzt ins Deutsche von gammelgemse''
    6: ...Partition zu mounten. Die erreichbare Schreib-/ Lesegeschwindigkeit liegt bei etwa 200 KB/s. <br><br>
    10: ...nenleben eines Routers mit eingebautem SD-Kartenleser] <br>( [http://web.archive.org/web/2005101822101...
    11: ...g Der fertige Router mit installiertem SD-Kartenleser] <br> ( [http://web.archive.org/web/200606150438...
  3. Verizon FIOS setup with dd-wrt as primary router (5,626 bytes)
    1: == '''Verizon Fios setup''' ==
    5: ...FIOS Supplied ActionTec WI424WL router follow the setup steps below, you must have the Ethernet port o...
    7: ...d you will see the LED's on the front blink and reset.
    9: ...did order the FIOS TV then you will get one of these routers. It is a necessary addition to the confi...
    11: 1 - Login to your AT router (default username/password = admin/password)
  4. Hardware (18,720 bytes)
    1: {{Languages|Hardware}}
    5: ...lled flash space is the place where the permanent settings are stored. This includes
    6: :* DD-WRT settings that you normally change using [[Web Interf...
    7: :* settings for user [[Startup Scripts]]
    14: ...content containing the pattern <search_pattern> (useful for quickly finding things in NVRAM):
  5. Hauptseite (3,948 bytes)
    11: Dieses MediaWiki wird zur Erstellung eines Tutorials f...
    20: --[[User:Master|Master]]
    44: [[Tutorial:_Hinzufügen_eines_SD-Kartenlesers_an_den_Linksys_WRT54G |MMC/SD Karte]]
    48: [[OpenVPN-Tunnel Server / Client, Netzwerke verbinden]] (2xDD-WRT - L...
    52: ...er Sharing X86 Based]] (Drucker Sharing trotz X86 Hardware und V24SP1)
  6. Recover from a bad flash (41,673 bytes)
    3: ...BELOW) AND THE WIKI ARTICLES ON [[Serial Recovery|SERIAL RECOVERY]] AND [[JTAG]].
    7: ...world. These techniques may be useful in these cases also.
    11: ...e below, make sure you've first tried a '''hard reset''' to revive your router:
    13: # Push reset button for 30 secs.
    14: # Without releasing reset button, disconnect power cord.
  7. Glossary (58,851 bytes)
    10: ... particular term it is best to use your browser's search function.'''
    15: ..., EAP permits the use of a backend authentication server, which may implement some or all authenticati...
    16: - (paraphrased and exerpted from the Internet Engineering Task ...
    19: ... range. Supports transfers up to 11 megabits per second under ideal conditions. Transmission occurs...
    22: ...nown as OFDM allowing it to reach 54 megabits per second under ideal conditions. It requires a radio ...
  8. WDS Linked router network (21,712 bytes)
    8: '''Subnet''' – the octets of an IP address selected by the subnet mask (e.g. 255.255.255.0, thu...
    12: ...et, to connect with the host router. There can be several clients
    14: '''WDS AP''' – the host router "Wireless Mode" selection, only on Qualcomm Atheros routers
    16: ... Station''' – the client router "Wireless Mode" selection only on Qualcomm Atheros routers
    18: ...twork, only required on Qualcomm Atheros routers (see more under Multiple WLANs)
  9. Linksys EA6500 V1 (23,843 bytes)
    1: ...e>[[Category:Linksys]][[Category:Cisco Linksys EA Series]][[Category:Linksys_guides]]</noinclude><cent...
    17: .../linksys-ea6500/ r33006]'''</font><br><sup>''--[[User:EA6500v1|EA6500v1]] 00:35, 7 August 2017 (CEST)'...
    27: | style="text-align: center;" | Release date / price
    90: ...de for the V2. If you have a EA6500 V2, check the hardware specific page or the forum for support</font><p><...
    100: ...ecovery process listed throughout this page and elsewhere</font><p><br></p>
  10. Kismet Server/Drone (18,210 bytes)
    1: ...guide on Kismet see:'' [[wrt54g kismet with linux server]]
    8: ...an run as either the full server, or just a drone server on the WRT54G router. You are then free to ru...
    10: ...tumbler will definitely appreciate running Kismet Server or Kismet Drone on their WRT54G, since this r...
    12: =Server or Drone=
    14: ...s to be the most common installation for windows users<br>
  11. Chillispot (36,851 bytes)
    2: <!-- Note to ChilliSpot Service Providers: -->
    4: ...rtisements (links to your service) go in the Link Section at the bottom. -->
    7: ...I naming schema was [https://svn.dd-wrt.com/changeset/43205 officially changed] in builds after 43192....
    9: ...a captive portal / walled-garden environment and uses RADIUS or a HTTP protocol for access provisionin...
    14: ... device support it you should try a firmware release between SVN 14896 and SVN 15506''
  12. Wl command (24,951 bytes)
    3: ...ols such as [[Wiviz]] or [[Kismet Server/Drone]] use it to configure the radios, monitor packets and e...
    6: ==Setup==
    7: No setup is required as 'wl' comes with all Broadcom DD...
    9: ...is absent/less developed, and users will need to use the 'ifconfig' and 'wl_atheros' commands instead.
    11: See these threads: [http://www.dd-wrt.com/phpBB2/viewtopic...
  13. Заводские установки (28,571 bytes)
    3: ...ской прошивкой. См. также [[Reset And Reboot]] для получения допо...
    7: ''Нужно объединить с [[Hardware#NVRAM]].
    24: === Нажатием кнопки сброса Reset на маршрутизаторе ===
    25: ...мите и удерживайте кнопку Reset, пока маршрутизатор включ...
    27: ...держивание кнопки сброса Reset при включении маршрутизат...
  14. Ipkg (tutorial) (10,613 bytes)
    1: Brainslayer is working hard to merge the code base of DD-WRT with the OpenWRT firmware. This means t...
    11: ... by default, ipkg on DD-WRT supports these pre-defined names:
    15: -o <offline_root> Use <offline_root> as the root for offline installati...
    20: -force-defaults Use default options for questions asked by ipkg.
    32: search <file> Search for a packaging providing <file>
  15. Index:Misc/ja (966 bytes)
    18: * [[Hardware#NVRAM|NVRAM]]
    20: * [[Hardware#Overclocking|Router Overclocking]]
    22: * [[Hardware#Hardware_Modifications|Hardware modifications]]
    28: * [[Linksys WAP54G Hardware Spec]]
  16. Separate LAN and WLAN (outdated) (15,234 bytes)
    1: '''This guide is outdated, please see [[Separate LAN and WLAN]] instead.'''
    3: ... configurations broken by this setup can still be set from the [[Telnet/SSH and the Command Line|comma...
    5: ...ing to configure their routers this way might choose to install the [http://www.openwrt.org OpenWRT] f...
    7: ...n mind that Brainslayer is currently in the processes of merging DD-WRT with OpenWRT. While it was alr...
    9: = Hardware =
  17. IPv6 (tutorial) (36,148 bytes)
    3: ...rnet Protocol to be formally adopted for general use.
    5: ...atter in the Earth, or 6.67*10<sup>23</sup> addresses for each m² of Earth, including oceans.<br><br>
    7: ...RT, which means your clients will be directly exposed to the Internet once you have enabled IPv6.
    14: ...rrent recommended build of the firmware (see your hardware forum for recommendations) using [[What_is_DD-WRT...
    15: * IPv6 enabled through the GUI section Administration/Management/Router Management/...
  18. Miscellaneous (1,602 bytes)
    2: ...for all the things that just don't fit anywhere else.
    9: ...es that describe specific hardware with only a loose
    34: * [[Hardware#NVRAM|NVRAM]]
    36: * [[Hardware#Overclocking|Router Overclocking]]
    38: * [[Hardware#Flow Acceleration,SFE and Cut-Through Forwarding|...
  19. Firewall (8,046 bytes)
    1: The purpose of the '''firewall''' is to moderate traffic and/...
    6: ...rewall - can pass packet by packet or drop them based on:
    20: ... address shortage, the internet society began to use NAT, and therefore the firewall also need to be N...
    23: ...ice (firewall), it can not deduce which client to send it to. Here are examples of protocols that has ...
    24: *[[wikipedia:IPsec|IPsec]] (over [[wikipedia:List_of_IP_protocol_numbers|...
  20. Bootvorgang (68,911 bytes)
    3: ...ehen, um mir mal die originalen Einstellungen anzusehen.<br>
    24: Total memory used by CFE: 0x80300000 - 0x8043EB40 (1305408)
    29: Text (code) segment: 0x80300000 - 0x80338DB0 (232880)
    44: gateway not set, nameserver not set
    64: ...444k/16384k available (1333k kernel code, 1940k reserved, 108k data, 6
  21. ¿Qué es DD-WRT? (4,318 bytes)
    9: ...s que el firmware comercial de Sveasoft. También se ha eliminado el tiempo de activación y otras cos...
    13: ...ados, y soporte software para la modificación de hardware SD-Card.<br>
    19: * La imagen de firmware de DD-WRT que se puede conseguir en [http://www.dd-wrt.com The DD-WRT Project]
    20: * Seguir las instrucciones de la [[Instalación]] para...
    32: *[[Glossary#DHCP Server|Servidor DHCP]] ([http://udhcp.busybox.net/ udhcp] o...
  22. Kismet on Linux (4,875 bytes)
    1: ...one on the wrt54g (v2.2) while running the kismet_server and kismet_client on a Linux box. (I was usi...
    5: First, I installed the seavsoft firmware (Firmware_Alchemy-6.0rc6.bin) on t...
    7: ...cp server running if you do not have ahother dhcp server on your network). I also turned off the fire...
    13: Log in using user name 'root' and the same password as the one for...
    15: ...ttp://www.kismetwireless.net/download.shtml . I used version 2005-06-R1a which was the latest version...
  23. Wrt54g kismet with linux server (9,309 bytes)
    1: ...v2.2) and wrt150n (v1.1) while running the kismet_server and kismet_client on a Linux box. (I was usi...
    6: ...rface to display the results on your screen. The server is the piece if software that sits in the mid...
    8: ...e puts the only the drone on the wrt and runs the server and client on your Linux box.
    10: ...Server/Drone]] for instructions on how to run the server and the client with cgywin under Windows.
    12: ...l strength so all of the signals reported to the user via the client will not display the correct sign...
  24. Linksys WRT610N (11,615 bytes)
    10: ...from within DD-WRT, run this from telnet/ssh, or use the Web GUI via "Administration->Commands->Run Co...
    16: * bootnv_ver=6, pmon_ver=CFE 4.175.64.12 (subsequently called CFE .12)
    17: * bootnv_ver=7, pmon_ver=CFE 4.175.64.16 (subsequently called CFE .16)
    20: ...en 12387 and 12424 do not work on CFE .12 models. See [http://svn.dd-wrt.com/ticket/1149 ticket 1149]'...
    23: *''NOTE:'' Eko builds have disappeared - use recommended build 14929 as a minimum.
  25. Feature requests (17,201 bytes)
    5: ...w for feature requests. I wouldn't expect a response, however. I'm not sure Brainslayer reads the Engl...
    9: * An NTP Server service to serve the local LAN.
    11: * Allowing to setup and run a tor server
    19: ...quire the user to be knowledgable, and most home users are not).
    21: ... or smtp server (easier) to send mail without the server of our ISP
  26. Wiederbeleben (2,917 bytes)
    7: ...en Browser) gibt es je nach Grad der Schwere diverse Rettungsmethoden, die im Folgenden beschrieben we...
    12: Und dahingehend eure LAN-IP in diesen IP-Bereich legen, für o.g. Beispiel: 192.168.1....
    15: ...R am Port 1 per TFTP geflasht werden. Bei einigen Hardware-Revisionen ist der Port 1 am Switch der 4. Slot.
    29: und dieser Anleitung
    33: '''Bitte erst Lesen und dann Anwenden!'''
  27. Wiki discussion (5,344 bytes)
    4: ...ion and optimisation of Russian part of Wiki, please, link to that new version [[DD-WRT_(RU)]] from Ma...
    7: ...ir models from the current main page. The various hardware specific guides can be found via the Miscellaneou...
    11: ...e good to start using locale aware articles. --[[User:Jbrazio|jbrazio]] 00:02, 3 January 2009 (CET)
    13: ...e categories. The more languages the better. --[[User:Glenn|Glenn]] 10:36, 23 June 2012 (CEST)
    23: ...get here.<br>--[[User:Baylink|Baylink]] 04:24, 13 September 2007 (CEST)
  28. Espanol (5,507 bytes)
    41: __NOEDITSECTION__
    68: ... SE505|Instalaci&oacute;n en el enrutador Siemens SE505]]
    106: ...ar!#Suministrando Hardware o Dinero|Suministrando Hardware o Dinero]]
  29. USB storage (55,588 bytes)
    12: ... with DD-WRT v3.0-r42819 std (03/30/20) in this case.<br>
    13: ...in exFAT and already successfully plugged in and used on a Windows 7 device.
    16: ...sda1 or where-ever it mounted your partition, and see the contents the same as you would with Windows ...
    18: In DD-WRT: Services, NAS. Samba Enable. Server String is whatever you like (a description, t...
    19: ...ed one, but if you want user/pass authentication, set it here).
  30. Wake-on-LAN (tutorial) (10,143 bytes)
    4: ...ter) is dependent upon the hardware and BIOS/UEFI settings. Most modern computers have the WOL feature...
    6: Reasons to use WOL with DD-WRT:
    7: ...want a computer on all the time, yet you want to use it from outside your home or office, and there is...
    8: * The computer is a media server that auto-sleeps, but you want it to wake aut...
    12: ... A PC which supports WOL. Most modern PC's can be set-up this way.
  31. DD-WRT Docu (FR) (22,239 bytes)
    9: Ce projet a été conçu à la base pour les routeurs Linksys WRT54G/GS/GL.
    10: ...écrire, éditer et à commenter les articles. Amusez-vous bien !
    13: ...le avancé de la [[Quality of Service|Qualité de service]] pour l'allocation de la bande passante, et...
    17: *Serveur VPN PPTP
    19: *Client et serveur SSH ([http://matt.ucc.asn.au/dropbear/dropbe...
  32. Buffalo WBR-G54 WLA-G54 WLA-G54C WBR2-G54 WBR2-G54S (8,489 bytes)
    4: ...oubleshooting section, and then issuing a 'mtd erase nvram' command. Then you can overwrite OpenWRT wi...
    6: Before flashing with DD-WRT, check to see if you can connect to the router over wireless.
    8: Also reference the [[Buffalo]] wiki, see [[Index:FAQ#Where_do_I_download_firmware.3F|Wher...
    10: ...a tftp after removing the first 35 bytes). A few users have reported success with a later version of B...
    12: For specific info regarding the WBR-G54 see [http://www.dd-wrt.com/phpBB2/viewtopic.php?t=10...
  33. DD-WRT Docu (IT) (14,289 bytes)
    5: ...e siano presenti imprecisioni o parti incomplete. Se vuoi puoi provvedere tu stesso alla modifica o in...
    8: ...ue può collaborare a questo lavoro (collettivo). Se vuoi unirti al gruppo, sarai il benvenuto!
    16: ...orto software per l'utilizzo di SD-Card (modifica hardware).
    21: *Server PPTP VPN
    23: *SSH Client e Server ([http://matt.ucc.asn.au/dropbear/dropbear.ht...
  34. VLAN Detached Networks each with Wireless and Internet (4,809 bytes)
    5: ...work 192.168.2.0/24 has an open ESSID for any to use, it's also on its own VLAN on port 4 of the switc...
    9: ...a WRT54GL or suitable router with the BCM5352 chipset since this gives each virtual AP it's own MAC ad...
    11: ... be included on the same public network. Leave these as bridged for the moment, in RC6 you can change ...
    13: ... 1 on the screen as this corresponds to port 4 in hardware.
    14: * Early hardware: http://www.tonns.org/openwrt/WRTSL54GS_layout_re...
  35. TP Link Archer A7v5 (7,003 bytes)
    1: ==HARDWARE==
    10: This is a work in progress by MSOENGINEER, so please be patient while he adds to this device wiki. PM ...
    12: ...more memory and CPU and cause your speed to decrease. This router with Q.o.S. turned on is only good f...
    14: ...ster, go back to stock which uses other dedicated hardware inside the A7v5 to improve network translation wh...
    16: ...00, so I don't know if SFE will go faster or not. Send me your results if you have faster speeds.
  36. Återställ från en dålig flash (907 bytes)
    8: ...pgrade Utility", använd "[http://www.linksys.com/servlet/Satellite?childpagename=US/Layout
    10: [[Category:Flashing networking hardware/se]]
    11: [[Category:jtag/se]]
  37. Debugging PPPOE Problems (2,511 bytes)
    2: ...int Protocol over Ethernet (PPPoE)|PPPoE]]''' is used mainly for handling connections via Digital Subs...
    17: Use ''telnet'' or ''ssh'' to login to the router.
    26: or something to this effect. From now on you'll see all syslog output on the
    30: To check the DSL connection we use the command line version of [http://www.roaringpe...
    33: ...'s setup otherwise the network interfaces are not set up properly for this test.
  38. Useful Scripts (54,380 bytes)
    1: {{Languages|Useful_Scripts}}
    2: ...iki mainpage]] / [[Index:Scripting|Scripting]] / Useful Scripts
    6: To find out how to load scripts onto the router, see [[Startup Scripts]].
    13: head -n1 /etc/profile | sed s!=!=/mmc/bin:/whatever/bin:! >> /tmp/newProfile
    14: tail -n1 /etc/profile | sed s!=!=/mmc/lib:/whatever/lib:! >> /tmp/newProfile
  39. Recover from a bad flash/it (583 bytes)
    8: ...e per riportarlo in vita prima di arrenderti e rassegnarti al fatto che il tuo (prima) bellissimo rout...
    12: [[Category:Flashing networking hardware/it]]
    14: Also see [http://www.customcourseworks.com/ coursework]
  40. Switched Ports (21,983 bytes)
    2: ...rsions prior to r46604. DD-WRT r46604 and newer use swconfig on Broadcom.'''</font>
    4: ...nal ports), usually after using the GUI (DD-WRT ''Setup''->''Switch Config'' (formerly ''VLANs'') tab....
    6: These instructions are necessary:
    7: *Only for Broadcom-based routers
    8: *For a variety of "basic" setups that are not properly handled in NVRAM by the...
  41. Afterburner (1,547 bytes)
    3: ... also have the Speedbooster/Afterburner feature; use with "normal" 802.11g clients will actually lower...
    5: ...o have 802.11b devices, and will not disable the use of them.
    6: * Afterburner can help in environments dense with wireless signals.
    7: ... and many PC Cards are based on Broadcom chips whose configurations support Afterburner <br>
    25: ...listed you may enable Afterburner on the Advanced Settings tab under Wireless in DD-WRT.
  42. USRobotics USR5461 (11,735 bytes)
    3: ...d party developed firmware for wireless routers based on a Broadcom or Atheros chip reference design.
    5: The major hardware features of USR5461 router are listed in this tab...
    7: ...0/30 Reset" which requires a fully functioning <RESET> button, other steps will be taken.
    10: ...has only 2MB of NVRAM which contains 128KB compressed CFE (Boot Loader). The rest of it (1870 KB) cont...
    12: Therefore, you have to select either DD-WRT '''micro''' builds (file size a...
  43. LaFonera Hardware serial to ethernet (1,034 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: .../ [[:Category:LaFonera_Hardware_(en)|Hardware]] / serial to ethernet'''
    5: == serial to ethernet ==
    6: There is a chance to turn LaFonera as a ''Rs232-Serial-port-to-wireless'' adapter?
    7: ...ia rs232 to the 2nd Fonera, by using a pc without serial port.
  44. Motorola WR850G (8,284 bytes)
    1: Because this tutorial reflects the latest 23SP2 version t...
    3: ...the firmware doesn't work equally well between those two versions. The version can be easily identifie...
    5: The following instructions will only work with hardware versions v2 and v3 or the WR850G and the WR850GP....
    7: ...n though DD-WRT v23 SP1 and later knows about the hardware it is being installed on, you risk bricking the r...
    9: .../secure.dd-wrt.com/dd-wrtv3/dd-wrt/downloads.html secure version]) to ensure that you are getting the ...
  45. DD-WRT on WR850G v1 (deutsch) (17,039 bytes)
    1: '''Dies ist nur eine reine deutsche 1-zu-1-Übersetzung der englischen Wiki von Stephen [[DD-WRT_on_...
    3: ..., oder ihren Chef verärgern usw. Das müssen sie selbst verantworten!
    7: ...efault) ausführte und habe begonnen die FAQ zu lesen.
    9: ...ola/all#12097 BroadbandReports-Forum-Motorola-FAQ-Seite] fand ich einige Firmware-Files, veröffentlic...
    11: ...uch in vielen Linksys-Firmwares vorhanden war, dieses arbeitet zwar nicht auf dem Motorola (ich habe e...
  46. WR850G v1 (26,232 bytes)
    5: ... to fill them in - but make sure they apply to <b>hardware version 1</b> of the WR850G.</i>
    12: ...ortunately, there are a few pitfalls if you own a hardware version 1 (the one with the AC/DC converter in th...
    13: ..., and no indication of the version on the label). See that page to get some idea first.<br>
    14: I'm no Windows user, but I know Linux quite well.
    15: ...understand what the commands below are doing, please check with a good Linux/Unix textbook first,
  47. Airodump and using/overriding libraries (6,898 bytes)
    1: ...you who have tried using the aircrack package (or several other apps) have experienced odd errors. In ...
    4: ...ctions have been removed from the libraries to conserve space. I was informed, however, that dd-wrt wi...
    16: ...rt.org/people/nbd/ar7/packages/aircrack_2.41-1_mipsel.ipk
    17: ipkg install aircrack_2.41-1_mipsel.ipk
    21: <b>Note</b>: URL for aircrack_2.4r1-1_mipsel.ipk updated 7 May 2006.
  48. Spanning Tree Protocol (29,361 bytes)
    3: ...et layer and is totally unrelated to dynamic IP-based routing protocols like RIP, OSPF or OLSR which c...
    7: ...he need for STP occurs when your router is being used in a mesh network with multiple WDS-enabled repe...
    9: ...ring a non-blocking mode. This can cause certain services on the client device (such as DHCP) to time...
    11: '''Warning:''' Users of Comcast Cable should always disable this opt...
    17: [[Image:wrt-set-stp.png]]
  49. Point-to-Point PPTP Tunneling usando dos DD-WRT (3,530 bytes)
    3: ...siguiente configuracion fue hecha con dos wrt54g (hardware version 2.2) y el firmware "DD-WRT v23 SP1 (04/13...
    37: :Se desea conectarse a cualquier ip de la red A o B independientemente...
    46: ::dentro de la pestaña "Services"<br />
    52: | Server IP or DNS Name
    70: | User Name
  50. Factory Defaults (25,206 bytes)
    3: ...e router under the factory firmware. See also [[Reset And Reboot]]
    8: ''Merge needed with [[Hardware#NVRAM]].
    10: ...r has a memory chip inside that stores persistent settings between reboots. The NVRAM is also retained...
    12: It is necessary to reset the NVRAM between flashes so that the new firmwa...
    14: ...gracefully continue booting, but there could be cases where it errors out so badly that it [[bricked|b...

View (previous 50) (next 50) (20 | 50 | 100 | 250 | 500).



Search in namespaces:

List redirects
Search for