Search results
From DD-WRT Wiki
You searched for Hardware/se
For more information about searching DD-WRT Wiki, see Help.
Showing below up to 100 results starting with #1.
View (previous 100) (next 100) (20 | 50 | 100 | 250 | 500).
Article title matches
- Hardware (18,720 bytes)
1: {{Languages|Hardware}}
5: ...lled flash space is the place where the permanent settings are stored. This includes
6: :* DD-WRT settings that you normally change using [[Web Interf...
7: :* settings for user [[Startup Scripts]]
14: ...content containing the pattern <search_pattern> (useful for quickly finding things in NVRAM): - LaFonera Hardware serial to ethernet (1,034 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: .../ [[:Category:LaFonera_Hardware_(en)|Hardware]] / serial to ethernet'''
5: == serial to ethernet ==
6: There is a chance to turn LaFonera as a ''Rs232-Serial-port-to-wireless'' adapter?
7: ...ia rs232 to the 2nd Fonera, by using a pc without serial port. - LaFonera Hardware i2c (6,202 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / i2c'''
8: ... router. And now, it’s done. Kernel module and user space programs are here.
10: [[Image:LaFonera_Hardware_i2c_-_01_overview.jpg]]
12: ... connector. Pin 1 and 2 are respectively used for sending and receiving SDA signals. 5 and 6, for SCL ... - LaFonera Hardware Coloured Chassis (2,817 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Coloured Chassis'''
15: [[image:LaFonera_Hardware_coloured_chassis.jpg]]
18: ...ase-mods.linear1.org/category/painting/ linear1 case mods].
22: ...ith some light reflecting from it (monitor & a mouse) to give an idea of the finish. - LaFonera Hardware SD-Card (6,579 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / SD-Card'''
11: ===Purpose===
16: A kernel module is required in order to use the MMC hack.
17: .../ OpenWRT] or compile [http://fghhgh.150m.com/ these] using the toolchain on your LaFonera. - LaFonera Hardware Power-Sources (2,124 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Power-Sources'''
9: You can even use a LiIon battery and a stepup circuit. (or power L...
11: For those willing to take the LiIon approach, make sure you...
14: To build my battery pack, I used an LM7805A, an external SCSI Zip 100 drive power... - Linksys WAP54G Hardware Spec (3,039 bytes)
4: Serial No: MDG0035...<br><br>
5: Hardware spec:<br>
28: * Several thin cabel
37: ...er), and GND of the metal casing for the SES or Reset button.
42: For this module I used gpio: 3,4,6 and 7 - LaFonera Info Hardware-Specifications (3,830 bytes)
3: ...Fonera_(en)|LaFonera]] / [[LaFonera_Info|Info]] / Hardware-Specifications'''
5: == The Hardware Specifications ==
12: * Antenna Connector: RP-SMA Connector (Reverse SMA)
17: * Reset Switch
31: * No extra pad for a second antenna. Possible internal PCB antenna? - LaFonera Hardware Second-Antenna (7,482 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: .../ [[:Category:LaFonera_Hardware_(en)|Hardware]] / Second-Antenna'''
6: ...al.jpg|thumb|right|Stock la fonera PCB showing unused antenna connection.]]
7: ...nd antenna is not hard. Since I recently used these wiki pages to help me along the process up gettin...
9: The process should be pretty self explainitory, though I'm sure others may have o... - LaFonera Hardware JTAG (268 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
4: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / JTAG'''
7: For now take a look at [[LaFonera_Hardware_IO_(en)]] - LaFonera Hardware USB (9,766 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / USB'''
9: ...e page or whatever; I just put it here because I used a USB port in the mod. -->
11: ...- This is just a method of using a USB port for a serial console, you still have to connect this port ...
13: ..., so read this article first: [[LaFonera_Hardware_Serial-Cable-Port]]. - LaFonera Hardware Power-over-Ethernet (3,201 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Power-over-Ethernet'''
8: ...10´s of euros each, but might be ideal in this case.
12: ...t and component placement). This information is based on our experience with the SMC unit.''
21: ...0m of CAT5. ''(It does run very hot and I'm surprised the box hasn't melted in our summer heat which e... - LaFonera Hardware Serial-Cable-Port (6,917 bytes)
1: [[Category:LaFonera_Hardware_(en)]]
2: .../ [[:Category:LaFonera_Hardware_(en)|Hardware]] / Serial-Cable-Port'''
4: ==Accessing serial console on the Fon==
7: | [[Image:LaFonera_Hardware_Serial-Cable-Port_01.jpg]]
8: ...al console you can turn SSH on and access various settings and reflash the firmware.''' - LaFonera Hardware Disassembling (1,764 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...Category:LaFonera_Hardware_(en)|Hardware]] / Disassembling'''
8: | [[Image:LaFonera Hardware Disassembling 01.png]]
9: ...free routers to countries in europe. The router itself is tiny: it fits nicely in the palm of my hands...
11: Included is a 5 v Ac/Dc converter and a simple user manual. - LaFonera Hardware (49 bytes)
1: #REDIRECT [[:Category:LaFonera_Hardware_(en)]]''' - Hardware DIY (1,115 bytes)
1: {{Languages|Hardware_DIY}}
3: ==Hardware List==
5: ...T wiki page for your particular router, in most cases.
13: [[Category:Hardware]] - LaFonera Hardware Cooling-System (11,159 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Cooling-System'''
7: to prevent melting your LaFonera (see http://www.youtube.com/watch?v=CIZEh7gf7M0)
12: So these things run pretty hot...
13: ...oking forward to my case melting and destroying itself. - LaFonera Hardware Controlling AC-Loads (4,663 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Controlling AC-Loads'''
15: == Hardware ==
18: [[image:LaFonera_Hardware_Controlling_AC-Loads_-_01_ready_to_start.jpg]]
20: [[media:LaFonera_Hardware_Controlling_AC-Loads_-_highres_01_ready_to_start.... - LaFonera Hardware Roboter Controlling (2,339 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Roboter Controlling'''
15: == Hardware ==
18: [[image:LaFonera_Hardware_Roboter_Controlling_-_03_complete_robot_front.jpg...
20: [[media:LaFonera_Hardware_Roboter_Controlling_-_highres_03_complete_robot_f... - LaFonera Hardware Logo-Removal (2,569 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Logo-Removal'''
5: ...a_Hardware_Logo-Removal_(de)|deutsch]] [[LaFonera_Hardware_Logo-Removal_(fr)|français]]
20: # Logo will dissolve into polish - Use a fresh piece of kitchen paper if it becomes dark...
23: # Clean up trace polish (or else it may degrade the plastic) using a damp kitchen ... - LaFonera Hardware Replace LEDs (6,702 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Replace LEDs'''
5: ...a_Hardware_Replace_LEDs_(de)|deutsch]] [[LaFonera_Hardware_Replace_LEDs_(fr)|français]]
29: [[image:LaFonera_Hardware_Replace_LEDs_-_08_preparation.jpg]]
31: [[media:LaFonera_Hardware_Replace_LEDs_-_highres_08_preparation.jpg|view in... - LaFonera Hardware Logo-Removal (de) (2,955 bytes)
2: [[Category:LaFonera_Hardware_(de)]]
3: ...Fonera_(de)|LaFonera]] / [[LaFonera_Hardware_(de)|Hardware]] / Logo-Entfernung'''
5: ...a_Hardware_Logo-Removal_(de)|deutsch]] [[LaFonera_Hardware_Logo-Removal_(fr)|français]]
18: === Vorgehensweise ===
22: ...' auch die Beschriftungen WLAN, LAN und POWER lassen sich entfernen. Du kannst die Beschriftungen mit... - LaFonera Hardware Logo-Removal (fr) (2,529 bytes)
2: [[Category:LaFonera_Hardware_(fr)]]
3: ...Fonera_(fr)|LaFonera]] / [[LaFonera_Hardware_(fr)|Hardware]] / Logo-Removal'''
5: ...a_Hardware_Logo-Removal_(de)|deutsch]] [[LaFonera_Hardware_Logo-Removal_(fr)|français]]
20: # Logo will dissolve into polish - Use a fresh piece of kitchen paper if it is too stain...
23: # Clean up trace polish (or else it may degrade the plastic) using a damp kitchen ... - LaFonera Hardware (de) (46 bytes)
1: #REDIRECT [[:Category:LaFonera_Hardware_(de)]] - LaFonera Hardware (fr) (49 bytes)
1: #REDIRECT [[:Category:LaFonera_Hardware_(fr)]]''' - LaFonera Hardware 32MB SDRAM MOD (5,063 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / 32MB SDRAM MOD'''
7: The Fonera uses 128 Mbit PC133 SDRAM arranged in 4 banks x 2 Mbi...
11: ...d, I choose to go with SO-DIMM for notebooks because there are usually 8 chips rather than 16 chips.
21: ... for the faint of heart and definitely not for those that have not done any kind of soldering before. ... - LaFonera Hardware Replace LEDs (de) (6,319 bytes)
1: [[Category:LaFonera_Hardware_(de)]]
2: ...Fonera_(de)|LaFonera]] / [[LaFonera_Hardware_(de)|Hardware]] / Replace LEDs'''
4: ...a_Hardware_Replace_LEDs_(de)|deutsch]] [[LaFonera_Hardware_Replace_LEDs_(fr)|français]]
28: [[image:LaFonera_Hardware_Replace_LEDs_-_08_preparation.jpg]]
30: [[media:LaFonera_Hardware_Replace_LEDs_-_highres_08_preparation.jpg|view in... - LaFonera Hardware Replace LEDs (fr) (5,848 bytes)
2: [[Category:LaFonera_Hardware_(fr)]]
3: ...Fonera_(fr)|LaFonera]] / [[LaFonera_Hardware_(fr)|Hardware]] / Replace LEDs'''
5: ...a_Hardware_Replace_LEDs_(de)|deutsch]] [[LaFonera_Hardware_Replace_LEDs_(fr)|français]]
10: Presque tout dans mon environnement (mise à part mon amie) a des LEDs bleues: PC, enceinte...
13: Je pense que c'est une modification très simple, si vous ... - LaFonera Hardware Power from USB (8,045 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Power from USB'''
6: ...ce to be able to take your LaFonera with you, to use as a portable access point, or to provide wireles...
8: ...stable and crash. However, in my initial tests it seems to perform fine running only off a single USB ...
14: These are the parts and tools I used. - LaFonera Hardware New Paint Job (1,237 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / New Paint Job'''
8: ...e then 2 Hours approximately including drying and second coat/gloss.
35: Disassemble your Fonera
40: ...per. After this is done you should be left with a semi rough surface perfect for the next step but bef... - LaFonera Hardware IO (en) (4,576 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / IO'''
7: ...2 and SW1 (and other test points, if they can be usefull to us.
9: ...time to make a schmatic of the LaFonera yet? Please fill in the
13: ...: http://wiki.openwrt.org/OpenWrtDocs/Customizing/Hardware/JTAG_Cable and here: http://tech.am/2006/10/06/au... - LaFonera Hardware Modding (636 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Modding'''
7: [[Image:LaFonera_Hardware_Modding_-_01_front.jpg]]
9: [[Image:LaFonera_Hardware_Modding_-_02_side.jpg]]
11: [[Image:LaFonera_Hardware_Modding_-_03_ahead.jpg]] - Hardware-Specific/zh cn (32 bytes)
- Hardware-specific/zh cn (32 bytes)
- LaFonera hardware New Paint Job (45 bytes)
1: #REDIRECT [[LaFonera Hardware New Paint Job]] - LaFonera Hardware (en) (49 bytes)
1: #REDIRECT [[:Category:LaFonera_Hardware_(en)]]''' - LaFonera Hardware IO (39 bytes)
1: #REDIRECT [[LaFonera Hardware IO (en)]] - LaFonera Hardware Controlling AC-Loads via webinterface (4,497 bytes)
1: [[Category:LaFonera_Hardware_(en)]]
2: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Controlling AC-loads via web-interface'''
11: == Uses ==
17: * Open your house/garage door.
31: : [[Image:LaFonera_Hardware_Controlling_AC-Loads_via_webinterface_-_04_overvi... - LaFonera Hardware SD-Card/Reader Position (6,152 bytes)
1: ...ry:LaFonera_Hardware_(en)|Hardware]] / [[LaFonera Hardware SD-Card|SD-Card]] / Reader Position'''
9: * A Fonera (I used a v2100, I don't know if this will work with 220...
10: ...ad both) card reader to take apart, or [[LaFonera_Hardware_SD-Card#Cheap_SD_Card_.22reader.22_.28floppy_cabl...
13: * Strong Glue (epoxy resin or similar) OR Self adhesive plastic for a temporary solution.
23: ...ders). Simply desolder the reader from the slot assembly from the PCB. - LaFonera Hardware LCD Screen (3,119 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / LCD Screen'''
9: [[Image:LaFonera_Hardware_LCD_Screen_-_01_fonera_LCD.jpg]]
12: ...playing with IR receiver. So why not playing with serial 128*128 LCD ?
14: ...CD 128*128 screen module come from 4D Systems and sell by Dontronics. My LCD module is not in product ... - LaFonera Hardware IR Receiver (4,545 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / IR Receiver'''
8: ...or as explained here. But this wont work with USB/serial adapter and it need a kernel module to direct...
10: ...d with USB/serial and embedded system with simple serial port like… La Fonera.
13: [[Image:LaFonera_Hardware_IR_Receiver_-_01_pcb.jpg]] - LaFonera Hardware LaFoneraPlus (12,883 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / LaFoneraPlus'''
7: ...nclude two ethernet interfaces. This can be very usefull for a lot of things. Can OpenWrt Kamikaze 7.0...
10: [[image:LaFonera_Hardware_LaFoneraPlus_-_01_case.jpg]]
15: [[image:LaFonera_Hardware_LaFoneraPlus_-_02_atheros_chip.jpg]] - Hardware-specific (5,910 bytes)
1: {{Languages|Hardware-specific}}
3: ...formation. Please also see [[:Category:Networking hardware tutorials]] and [[Supported_Devices]] for links t...
5: ...f the sections and links in this page will be revised for brevity and to reduce redundancy.''' (05/17/...
7: =Hardware Brand=
9: ...3202A: see [[LaFonera Software Flashing]] Page. (Use only the MR3202A binaries provided, instead of th... - OpenVPN Router to Router Bridged Configuration Alternative (Hardware VPN) (5,716 bytes)
1: ...uter to Router Bridged Configuration Alternative (Hardware VPN) ===
2: (for hardware "like" vpn access for multiple computers or appli...
6: This will allow for hardware like VPN access on the client side to more than o...
9: *Internet Video box that is service and region limited
11: ...le still using US services. So long as the DD-WRT server is in the US. - Hardware DIY/ru (33 bytes)
- Hardware DIY/zh cn (541 bytes)
1: {{Languages|Hardware_DIY}}
5: * [[Serial port pinouts|串口引出线]]
10: * [[WRT54GL MAX232 Serial |给WRT54G/GL添加串口芯片MAX232]]
11: * [[:Category:LaFonera_Hardware_%28en%29|La Fonera的硬件摩丁部落]] - Hardware/ru (2,765 bytes)
1: {{Languages|Hardware}}
11: nvram set <var_name>="<value>"
29: nvram unset var_name
39: nvram erase
51: [[Category:Hardware/ru| ]] - Hardware-specific/fr (567 bytes)
1: {{Languages|Hardware-specific}}
4: ...omplète''' en anglais cliquez sur ce lien : '''[[Hardware-specific]]'''
8: La seule page traitant des spécificités matérielles ...
Page text matches
- DD-WRT Doku (DE) (83,042 bytes)
8: Diese Wiki wurde schon lange nicht mehr aktualisiert. V...
10: Die Community hat wahrscheinlich kein Interesse mehr an einer Deutschen-Wiki.
15: it seems that the german community is not longer intere...
19: ...tp://de.wikipedia.org/wiki/Artikel Artikel] verfassen, editieren und diskutieren.<br>
25: ...//www.dd-wrt.com/wiki/index.php/Supported_Devices Hardware-Support-Liste]''. - Hinzufügen eines SD-Kartenlesers an den Linksys WRT54G (20,102 bytes)
1: == Tutorial: Hinzufügen eines SD-Kartenlesers an den Linksys WRT54G ==
3: ...stoffersen - übersetzt ins Deutsche von gammelgemse''
6: ...Partition zu mounten. Die erreichbare Schreib-/ Lesegeschwindigkeit liegt bei etwa 200 KB/s. <br><br>
10: ...nenleben eines Routers mit eingebautem SD-Kartenleser] <br>( [http://web.archive.org/web/2005101822101...
11: ...g Der fertige Router mit installiertem SD-Kartenleser] <br> ( [http://web.archive.org/web/200606150438... - Verizon FIOS setup with dd-wrt as primary router (5,626 bytes)
1: == '''Verizon Fios setup''' ==
5: ...FIOS Supplied ActionTec WI424WL router follow the setup steps below, you must have the Ethernet port o...
7: ...d you will see the LED's on the front blink and reset.
9: ...did order the FIOS TV then you will get one of these routers. It is a necessary addition to the confi...
11: 1 - Login to your AT router (default username/password = admin/password) - Hardware (18,720 bytes)
1: {{Languages|Hardware}}
5: ...lled flash space is the place where the permanent settings are stored. This includes
6: :* DD-WRT settings that you normally change using [[Web Interf...
7: :* settings for user [[Startup Scripts]]
14: ...content containing the pattern <search_pattern> (useful for quickly finding things in NVRAM): - Hauptseite (3,948 bytes)
11: Dieses MediaWiki wird zur Erstellung eines Tutorials f...
20: --[[User:Master|Master]]
44: [[Tutorial:_Hinzufügen_eines_SD-Kartenlesers_an_den_Linksys_WRT54G |MMC/SD Karte]]
48: [[OpenVPN-Tunnel Server / Client, Netzwerke verbinden]] (2xDD-WRT - L...
52: ...er Sharing X86 Based]] (Drucker Sharing trotz X86 Hardware und V24SP1) - Recover from a bad flash (41,673 bytes)
3: ...BELOW) AND THE WIKI ARTICLES ON [[Serial Recovery|SERIAL RECOVERY]] AND [[JTAG]].
7: ...world. These techniques may be useful in these cases also.
11: ...e below, make sure you've first tried a '''hard reset''' to revive your router:
13: # Push reset button for 30 secs.
14: # Without releasing reset button, disconnect power cord. - Glossary (58,851 bytes)
10: ... particular term it is best to use your browser's search function.'''
15: ..., EAP permits the use of a backend authentication server, which may implement some or all authenticati...
16: - (paraphrased and exerpted from the Internet Engineering Task ...
19: ... range. Supports transfers up to 11 megabits per second under ideal conditions. Transmission occurs...
22: ...nown as OFDM allowing it to reach 54 megabits per second under ideal conditions. It requires a radio ... - WDS Linked router network (21,712 bytes)
8: '''Subnet''' – the octets of an IP address selected by the subnet mask (e.g. 255.255.255.0, thu...
12: ...et, to connect with the host router. There can be several clients
14: '''WDS AP''' – the host router "Wireless Mode" selection, only on Qualcomm Atheros routers
16: ... Station''' – the client router "Wireless Mode" selection only on Qualcomm Atheros routers
18: ...twork, only required on Qualcomm Atheros routers (see more under Multiple WLANs) - Linksys EA6500 V1 (23,843 bytes)
1: ...e>[[Category:Linksys]][[Category:Cisco Linksys EA Series]][[Category:Linksys_guides]]</noinclude><cent...
17: .../linksys-ea6500/ r33006]'''</font><br><sup>''--[[User:EA6500v1|EA6500v1]] 00:35, 7 August 2017 (CEST)'...
27: | style="text-align: center;" | Release date / price
90: ...de for the V2. If you have a EA6500 V2, check the hardware specific page or the forum for support</font><p><...
100: ...ecovery process listed throughout this page and elsewhere</font><p><br></p> - Kismet Server/Drone (18,210 bytes)
1: ...guide on Kismet see:'' [[wrt54g kismet with linux server]]
8: ...an run as either the full server, or just a drone server on the WRT54G router. You are then free to ru...
10: ...tumbler will definitely appreciate running Kismet Server or Kismet Drone on their WRT54G, since this r...
12: =Server or Drone=
14: ...s to be the most common installation for windows users<br> - Chillispot (36,851 bytes)
2: <!-- Note to ChilliSpot Service Providers: -->
4: ...rtisements (links to your service) go in the Link Section at the bottom. -->
7: ...I naming schema was [https://svn.dd-wrt.com/changeset/43205 officially changed] in builds after 43192....
9: ...a captive portal / walled-garden environment and uses RADIUS or a HTTP protocol for access provisionin...
14: ... device support it you should try a firmware release between SVN 14896 and SVN 15506'' - Wl command (24,951 bytes)
3: ...ols such as [[Wiviz]] or [[Kismet Server/Drone]] use it to configure the radios, monitor packets and e...
6: ==Setup==
7: No setup is required as 'wl' comes with all Broadcom DD...
9: ...is absent/less developed, and users will need to use the 'ifconfig' and 'wl_atheros' commands instead.
11: See these threads: [http://www.dd-wrt.com/phpBB2/viewtopic... - Заводские установки (28,571 bytes)
3: ...ской прошивкой. См. также [[Reset And Reboot]] для получения допо...
7: ''Нужно объединить с [[Hardware#NVRAM]].
24: === Нажатием кнопки сброса Reset на маршрутизаторе ===
25: ...мите и удерживайте кнопку Reset, пока маршрутизатор включ...
27: ...держивание кнопки сброса Reset при включении маршрутизат... - Ipkg (tutorial) (10,613 bytes)
1: Brainslayer is working hard to merge the code base of DD-WRT with the OpenWRT firmware. This means t...
11: ... by default, ipkg on DD-WRT supports these pre-defined names:
15: -o <offline_root> Use <offline_root> as the root for offline installati...
20: -force-defaults Use default options for questions asked by ipkg.
32: search <file> Search for a packaging providing <file> - Index:Misc/ja (966 bytes)
18: * [[Hardware#NVRAM|NVRAM]]
20: * [[Hardware#Overclocking|Router Overclocking]]
22: * [[Hardware#Hardware_Modifications|Hardware modifications]]
28: * [[Linksys WAP54G Hardware Spec]] - Separate LAN and WLAN (outdated) (15,234 bytes)
1: '''This guide is outdated, please see [[Separate LAN and WLAN]] instead.'''
3: ... configurations broken by this setup can still be set from the [[Telnet/SSH and the Command Line|comma...
5: ...ing to configure their routers this way might choose to install the [http://www.openwrt.org OpenWRT] f...
7: ...n mind that Brainslayer is currently in the processes of merging DD-WRT with OpenWRT. While it was alr...
9: = Hardware = - IPv6 (tutorial) (36,148 bytes)
3: ...rnet Protocol to be formally adopted for general use.
5: ...atter in the Earth, or 6.67*10<sup>23</sup> addresses for each m² of Earth, including oceans.<br><br>
7: ...RT, which means your clients will be directly exposed to the Internet once you have enabled IPv6.
14: ...rrent recommended build of the firmware (see your hardware forum for recommendations) using [[What_is_DD-WRT...
15: * IPv6 enabled through the GUI section Administration/Management/Router Management/... - Miscellaneous (1,602 bytes)
2: ...for all the things that just don't fit anywhere else.
9: ...es that describe specific hardware with only a loose
34: * [[Hardware#NVRAM|NVRAM]]
36: * [[Hardware#Overclocking|Router Overclocking]]
38: * [[Hardware#Flow Acceleration,SFE and Cut-Through Forwarding|... - Firewall (8,046 bytes)
1: The purpose of the '''firewall''' is to moderate traffic and/...
6: ...rewall - can pass packet by packet or drop them based on:
20: ... address shortage, the internet society began to use NAT, and therefore the firewall also need to be N...
23: ...ice (firewall), it can not deduce which client to send it to. Here are examples of protocols that has ...
24: *[[wikipedia:IPsec|IPsec]] (over [[wikipedia:List_of_IP_protocol_numbers|... - Bootvorgang (68,911 bytes)
3: ...ehen, um mir mal die originalen Einstellungen anzusehen.<br>
24: Total memory used by CFE: 0x80300000 - 0x8043EB40 (1305408)
29: Text (code) segment: 0x80300000 - 0x80338DB0 (232880)
44: gateway not set, nameserver not set
64: ...444k/16384k available (1333k kernel code, 1940k reserved, 108k data, 6 - ¿Qué es DD-WRT? (4,318 bytes)
9: ...s que el firmware comercial de Sveasoft. También se ha eliminado el tiempo de activación y otras cos...
13: ...ados, y soporte software para la modificación de hardware SD-Card.<br>
19: * La imagen de firmware de DD-WRT que se puede conseguir en [http://www.dd-wrt.com The DD-WRT Project]
20: * Seguir las instrucciones de la [[Instalación]] para...
32: *[[Glossary#DHCP Server|Servidor DHCP]] ([http://udhcp.busybox.net/ udhcp] o... - Kismet on Linux (4,875 bytes)
1: ...one on the wrt54g (v2.2) while running the kismet_server and kismet_client on a Linux box. (I was usi...
5: First, I installed the seavsoft firmware (Firmware_Alchemy-6.0rc6.bin) on t...
7: ...cp server running if you do not have ahother dhcp server on your network). I also turned off the fire...
13: Log in using user name 'root' and the same password as the one for...
15: ...ttp://www.kismetwireless.net/download.shtml . I used version 2005-06-R1a which was the latest version... - Wrt54g kismet with linux server (9,309 bytes)
1: ...v2.2) and wrt150n (v1.1) while running the kismet_server and kismet_client on a Linux box. (I was usi...
6: ...rface to display the results on your screen. The server is the piece if software that sits in the mid...
8: ...e puts the only the drone on the wrt and runs the server and client on your Linux box.
10: ...Server/Drone]] for instructions on how to run the server and the client with cgywin under Windows.
12: ...l strength so all of the signals reported to the user via the client will not display the correct sign... - Linksys WRT610N (11,615 bytes)
10: ...from within DD-WRT, run this from telnet/ssh, or use the Web GUI via "Administration->Commands->Run Co...
16: * bootnv_ver=6, pmon_ver=CFE 4.175.64.12 (subsequently called CFE .12)
17: * bootnv_ver=7, pmon_ver=CFE 4.175.64.16 (subsequently called CFE .16)
20: ...en 12387 and 12424 do not work on CFE .12 models. See [http://svn.dd-wrt.com/ticket/1149 ticket 1149]'...
23: *''NOTE:'' Eko builds have disappeared - use recommended build 14929 as a minimum. - Feature requests (17,201 bytes)
5: ...w for feature requests. I wouldn't expect a response, however. I'm not sure Brainslayer reads the Engl...
9: * An NTP Server service to serve the local LAN.
11: * Allowing to setup and run a tor server
19: ...quire the user to be knowledgable, and most home users are not).
21: ... or smtp server (easier) to send mail without the server of our ISP - Wiederbeleben (2,917 bytes)
7: ...en Browser) gibt es je nach Grad der Schwere diverse Rettungsmethoden, die im Folgenden beschrieben we...
12: Und dahingehend eure LAN-IP in diesen IP-Bereich legen, für o.g. Beispiel: 192.168.1....
15: ...R am Port 1 per TFTP geflasht werden. Bei einigen Hardware-Revisionen ist der Port 1 am Switch der 4. Slot.
29: und dieser Anleitung
33: '''Bitte erst Lesen und dann Anwenden!''' - Wiki discussion (5,344 bytes)
4: ...ion and optimisation of Russian part of Wiki, please, link to that new version [[DD-WRT_(RU)]] from Ma...
7: ...ir models from the current main page. The various hardware specific guides can be found via the Miscellaneou...
11: ...e good to start using locale aware articles. --[[User:Jbrazio|jbrazio]] 00:02, 3 January 2009 (CET)
13: ...e categories. The more languages the better. --[[User:Glenn|Glenn]] 10:36, 23 June 2012 (CEST)
23: ...get here.<br>--[[User:Baylink|Baylink]] 04:24, 13 September 2007 (CEST) - Espanol (5,507 bytes)
41: __NOEDITSECTION__
68: ... SE505|Instalación en el enrutador Siemens SE505]]
106: ...ar!#Suministrando Hardware o Dinero|Suministrando Hardware o Dinero]] - USB storage (55,588 bytes)
12: ... with DD-WRT v3.0-r42819 std (03/30/20) in this case.<br>
13: ...in exFAT and already successfully plugged in and used on a Windows 7 device.
16: ...sda1 or where-ever it mounted your partition, and see the contents the same as you would with Windows ...
18: In DD-WRT: Services, NAS. Samba Enable. Server String is whatever you like (a description, t...
19: ...ed one, but if you want user/pass authentication, set it here). - Wake-on-LAN (tutorial) (10,143 bytes)
4: ...ter) is dependent upon the hardware and BIOS/UEFI settings. Most modern computers have the WOL feature...
6: Reasons to use WOL with DD-WRT:
7: ...want a computer on all the time, yet you want to use it from outside your home or office, and there is...
8: * The computer is a media server that auto-sleeps, but you want it to wake aut...
12: ... A PC which supports WOL. Most modern PC's can be set-up this way. - DD-WRT Docu (FR) (22,239 bytes)
9: Ce projet a été conçu à la base pour les routeurs Linksys WRT54G/GS/GL.
10: ...écrire, éditer et à commenter les articles. Amusez-vous bien !
13: ...le avancé de la [[Quality of Service|Qualité de service]] pour l'allocation de la bande passante, et...
17: *Serveur VPN PPTP
19: *Client et serveur SSH ([http://matt.ucc.asn.au/dropbear/dropbe... - Buffalo WBR-G54 WLA-G54 WLA-G54C WBR2-G54 WBR2-G54S (8,489 bytes)
4: ...oubleshooting section, and then issuing a 'mtd erase nvram' command. Then you can overwrite OpenWRT wi...
6: Before flashing with DD-WRT, check to see if you can connect to the router over wireless.
8: Also reference the [[Buffalo]] wiki, see [[Index:FAQ#Where_do_I_download_firmware.3F|Wher...
10: ...a tftp after removing the first 35 bytes). A few users have reported success with a later version of B...
12: For specific info regarding the WBR-G54 see [http://www.dd-wrt.com/phpBB2/viewtopic.php?t=10... - DD-WRT Docu (IT) (14,289 bytes)
5: ...e siano presenti imprecisioni o parti incomplete. Se vuoi puoi provvedere tu stesso alla modifica o in...
8: ...ue può collaborare a questo lavoro (collettivo). Se vuoi unirti al gruppo, sarai il benvenuto!
16: ...orto software per l'utilizzo di SD-Card (modifica hardware).
21: *Server PPTP VPN
23: *SSH Client e Server ([http://matt.ucc.asn.au/dropbear/dropbear.ht... - VLAN Detached Networks each with Wireless and Internet (4,809 bytes)
5: ...work 192.168.2.0/24 has an open ESSID for any to use, it's also on its own VLAN on port 4 of the switc...
9: ...a WRT54GL or suitable router with the BCM5352 chipset since this gives each virtual AP it's own MAC ad...
11: ... be included on the same public network. Leave these as bridged for the moment, in RC6 you can change ...
13: ... 1 on the screen as this corresponds to port 4 in hardware.
14: * Early hardware: http://www.tonns.org/openwrt/WRTSL54GS_layout_re... - TP Link Archer A7v5 (7,003 bytes)
1: ==HARDWARE==
10: This is a work in progress by MSOENGINEER, so please be patient while he adds to this device wiki. PM ...
12: ...more memory and CPU and cause your speed to decrease. This router with Q.o.S. turned on is only good f...
14: ...ster, go back to stock which uses other dedicated hardware inside the A7v5 to improve network translation wh...
16: ...00, so I don't know if SFE will go faster or not. Send me your results if you have faster speeds. - Återställ från en dålig flash (907 bytes)
8: ...pgrade Utility", använd "[http://www.linksys.com/servlet/Satellite?childpagename=US/Layout
10: [[Category:Flashing networking hardware/se]]
11: [[Category:jtag/se]] - Debugging PPPOE Problems (2,511 bytes)
2: ...int Protocol over Ethernet (PPPoE)|PPPoE]]''' is used mainly for handling connections via Digital Subs...
17: Use ''telnet'' or ''ssh'' to login to the router.
26: or something to this effect. From now on you'll see all syslog output on the
30: To check the DSL connection we use the command line version of [http://www.roaringpe...
33: ...'s setup otherwise the network interfaces are not set up properly for this test. - Useful Scripts (54,380 bytes)
1: {{Languages|Useful_Scripts}}
2: ...iki mainpage]] / [[Index:Scripting|Scripting]] / Useful Scripts
6: To find out how to load scripts onto the router, see [[Startup Scripts]].
13: head -n1 /etc/profile | sed s!=!=/mmc/bin:/whatever/bin:! >> /tmp/newProfile
14: tail -n1 /etc/profile | sed s!=!=/mmc/lib:/whatever/lib:! >> /tmp/newProfile - Recover from a bad flash/it (583 bytes)
8: ...e per riportarlo in vita prima di arrenderti e rassegnarti al fatto che il tuo (prima) bellissimo rout...
12: [[Category:Flashing networking hardware/it]]
14: Also see [http://www.customcourseworks.com/ coursework] - Switched Ports (23,473 bytes)
1: ...p;**NOTE**: </span> For Netgear R9000/XR700, see [https://forum.dd-wrt.com/phpBB2/viewtopic.php?t...
6: ...nal ports), usually after using the GUI (DD-WRT ''Setup''->''Switch Config'' (formerly ''VLANs'') tab....
8: These instructions are necessary:
9: *Only for Broadcom-based routers
10: *For a variety of "basic" setups that are not properly handled in NVRAM by the... - Afterburner (1,547 bytes)
3: ... also have the Speedbooster/Afterburner feature; use with "normal" 802.11g clients will actually lower...
5: ...o have 802.11b devices, and will not disable the use of them.
6: * Afterburner can help in environments dense with wireless signals.
7: ... and many PC Cards are based on Broadcom chips whose configurations support Afterburner <br>
25: ...listed you may enable Afterburner on the Advanced Settings tab under Wireless in DD-WRT. - USRobotics USR5461 (11,735 bytes)
3: ...d party developed firmware for wireless routers based on a Broadcom or Atheros chip reference design.
5: The major hardware features of USR5461 router are listed in this tab...
7: ...0/30 Reset" which requires a fully functioning <RESET> button, other steps will be taken.
10: ...has only 2MB of NVRAM which contains 128KB compressed CFE (Boot Loader). The rest of it (1870 KB) cont...
12: Therefore, you have to select either DD-WRT '''micro''' builds (file size a... - LaFonera Hardware serial to ethernet (1,034 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: .../ [[:Category:LaFonera_Hardware_(en)|Hardware]] / serial to ethernet'''
5: == serial to ethernet ==
6: There is a chance to turn LaFonera as a ''Rs232-Serial-port-to-wireless'' adapter?
7: ...ia rs232 to the 2nd Fonera, by using a pc without serial port. - Motorola WR850G (8,284 bytes)
1: Because this tutorial reflects the latest 23SP2 version t...
3: ...the firmware doesn't work equally well between those two versions. The version can be easily identifie...
5: The following instructions will only work with hardware versions v2 and v3 or the WR850G and the WR850GP....
7: ...n though DD-WRT v23 SP1 and later knows about the hardware it is being installed on, you risk bricking the r...
9: .../secure.dd-wrt.com/dd-wrtv3/dd-wrt/downloads.html secure version]) to ensure that you are getting the ... - DD-WRT on WR850G v1 (deutsch) (17,039 bytes)
1: '''Dies ist nur eine reine deutsche 1-zu-1-Übersetzung der englischen Wiki von Stephen [[DD-WRT_on_...
3: ..., oder ihren Chef verärgern usw. Das müssen sie selbst verantworten!
7: ...efault) ausführte und habe begonnen die FAQ zu lesen.
9: ...ola/all#12097 BroadbandReports-Forum-Motorola-FAQ-Seite] fand ich einige Firmware-Files, veröffentlic...
11: ...uch in vielen Linksys-Firmwares vorhanden war, dieses arbeitet zwar nicht auf dem Motorola (ich habe e... - WR850G v1 (26,232 bytes)
5: ... to fill them in - but make sure they apply to <b>hardware version 1</b> of the WR850G.</i>
12: ...ortunately, there are a few pitfalls if you own a hardware version 1 (the one with the AC/DC converter in th...
13: ..., and no indication of the version on the label). See that page to get some idea first.<br>
14: I'm no Windows user, but I know Linux quite well.
15: ...understand what the commands below are doing, please check with a good Linux/Unix textbook first, - Airodump and using/overriding libraries (6,898 bytes)
1: ...you who have tried using the aircrack package (or several other apps) have experienced odd errors. In ...
4: ...ctions have been removed from the libraries to conserve space. I was informed, however, that dd-wrt wi...
16: ...rt.org/people/nbd/ar7/packages/aircrack_2.41-1_mipsel.ipk
17: ipkg install aircrack_2.41-1_mipsel.ipk
21: <b>Note</b>: URL for aircrack_2.4r1-1_mipsel.ipk updated 7 May 2006. - Spanning Tree Protocol (29,361 bytes)
3: ...et layer and is totally unrelated to dynamic IP-based routing protocols like RIP, OSPF or OLSR which c...
7: ...he need for STP occurs when your router is being used in a mesh network with multiple WDS-enabled repe...
9: ...ring a non-blocking mode. This can cause certain services on the client device (such as DHCP) to time...
11: '''Warning:''' Users of Comcast Cable should always disable this opt...
17: [[Image:wrt-set-stp.png]] - Point-to-Point PPTP Tunneling usando dos DD-WRT (3,530 bytes)
3: ...siguiente configuracion fue hecha con dos wrt54g (hardware version 2.2) y el firmware "DD-WRT v23 SP1 (04/13...
37: :Se desea conectarse a cualquier ip de la red A o B independientemente...
46: ::dentro de la pestaña "Services"<br />
52: | Server IP or DNS Name
70: | User Name - Factory Defaults (25,206 bytes)
3: ...e router under the factory firmware. See also [[Reset And Reboot]]
8: ''Merge needed with [[Hardware#NVRAM]].
10: ...r has a memory chip inside that stores persistent settings between reboots. The NVRAM is also retained...
12: It is necessary to reset the NVRAM between flashes so that the new firmwa...
14: ...gracefully continue booting, but there could be cases where it errors out so badly that it [[bricked|b... - Installation (20,950 bytes)
2: Installing DD-WRT on a router in most cases is almost as simple as installing a program onto...
7: ...-wrt.com/support/router-database/ '''router database'''] first.
11: For a list of devices working with DD-WRT, please see '''[[Supported Devices]]'''.
13: ...t of devices '''not''' working with DD-WRT please see '''[[Known incompatible devices]]'''.
15: ...k_%28electronics%29 Bricking] your router''', please finish reading this entire page first. You will ... - Netgear R9000 (8,270 bytes)
12: Please note, Wireless-AD (60GHz) support is untested at ...
14: 10g interface - supported SFP hardware info: [https://forum.dd-wrt.com/phpBB2/viewtopic....
17: =[https://wikidevi.wi-cat.ru/Netgear_R9000 Hardware Specifications]=
37: | Serial: || yes, 4-pin header
70: ...ear firmware defaults to IP address 192.168.1.1, username "admin" and password "password" - Accton (82 bytes)
1: Please refer to [[Installation]] and [[Hardware-specific]] pages for further info. - D-Link (234 bytes)
1: ...Category:Networking hardware tutorials|Networking hardware tutorials]] pages for further info. - Linksys WRT54G v2.2 (1,689 bytes)
3: ==Hardware Specifications==
10: ... via cable to a LAN port of your router. Do NOT use wireless.
11: #Set a static IP on your computer (e.g. 192.168.1.7, ...
12: #Do a [[Hard_reset_or_30/30/30|hard reset]] on the router
14: #Leave the username blank and enter "admin" as the password - USRobotics USR8200 (6,454 bytes)
14: Reset the device to defaults.<br>
16: ...ing. But keep cool its easy to handle as you will see below.<br>
18: You will need a lil [https://dev.openwrt.org/browser/trunk/scripts/flashing/jungo-image.py?format=txt...
20: The 2nd thing that is needed is the Redboot itself. The latest version can be downloaded here: [ht...
23: ...ished with the jungo-image.py script. The script uses the telnet interface into the router to accompli... - Linksys WRT54G-TM (9,840 bytes)
8: ...he CORRECT FILES MUST BE USED. The WRT54G-TM was used by T-Mobile while the WRT54G-RG was for Rogers i...
18: <font color=red>'''*Research ''New Build'' forum threads for issues with t...
20: ...etwork controller to speed up the process, otherwise once you upload the '''CFE_Updater-WRT54G-TM.bin'...
22: ...ons/right-click on Local Area Connection icon and select Properties.
25: ...ocal Area Connection/Internet Protocol TCP/IP and set the static IP address. - Verizon FiOS - Using Your Own Router (6,751 bytes)
1: This tutorial should be able to help those who want to replace their Verizon-provided Action...
3: ..., be aware that this '''will''' interrupt your TV service.
9: ...ights: Coax WAN and Ethernet WAN. This is pretty self-explanatory: coax means the TV type cable, ethe...
11: ...hrough coax. PPPoE connections automatically release the IP address when the connection is broken.
13: ...r, and you don't need to change anything. Otherwise: - LaFonera Hardware i2c (6,202 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / i2c'''
8: ... router. And now, it’s done. Kernel module and user space programs are here.
10: [[Image:LaFonera_Hardware_i2c_-_01_overview.jpg]]
12: ... connector. Pin 1 and 2 are respectively used for sending and receiving SDA signals. 5 and 6, for SCL ... - What is DD-WRT? (20,620 bytes)
3: ...L for many Wi-Fi 4 and Wi-Fi 5 wireless routers based on a Broadcom or Atheros chip reference design.
5: ... the original [[wikipedia:GNU_General_Public_License|GPL]]'d Linksys firmware and a number of other op...
9: ...devices, or even the firmware available for purchase from Sveasoft. It is also free of the product act...
11: ... allocation, and software support for the SD-Card hardware modification.<br>
24: For new features, code, and issue tickets, see the SCM and project management at https://svn.dd... - Version Features (31,493 bytes)
1: ...onfigs, includes, and [https://svn.dd-wrt.com/browser/src/router/rules/ rules] for finer granularity o...
3: ==Atheros Based Devices (incl. UBNT)==
5: ... of the firmware available per model. The feature set in Atheros builds are generally limited by the a...
7: ==Broadcom Based Devices==
8: ... information about which versions can run on your hardware. - WHR-HP-G54 (24,374 bytes)
6: ...ckground information of the specific environment. See Forum threads referenced throughout this Wiki pa...
8: ... obstructions), SNR, throughput, and any relevant settings.
11: See DD-WRT Wiki article: [[Buffalo]].
15: ...ile via web gui with a size of 3817472 Bytes. Please update this with the Maximum file size you can de...
21: ...xE/EL-series Broadcom 'BroadRange Technology' chipset. [http://www.dd-wrt.com/phpBB2/viewtopic.php?t=1... - Hashes & Checksums (15,359 bytes)
2: ...uch as software packages, ISO images, or in our case a downloaded firmware binary. When we verify the...
6: ...downloads.html the httpS version of the downloads section] and
7: ...httpS version of this article], both of which are served with a valid (CA-signed) SSL certificate.</fo...
9: ...ou may need to locate them if you don't happen to see the hash for your particular binary below.
36: ...mware file onto the Terminal window, MacOS will insert the full pathname of the firmware file for you.... - ¿Qué es "DD-WRT"? (11,698 bytes)
6: ...4G/GS/GL] y otros routers 802.11g basados en un diseño de referencia similar o igual al Broadco...
7: Todos estos routers estan diseñados para utilizar linux en el firmware oficial ...
10: ...GPL de Linksys y en otros proyectos. '''DD-WRT''' se creó debido a que Sveasoft comenzó a cobr...
14: ...ftware para que funcionen las tarjetas SD/MMC que se le pueden instalar haciendo algunas modificacione...
27: *Servidor DHCP ([http://udhcp.busybox.net/ udhcp] or ... - LaFonera Hardware Coloured Chassis (2,817 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Coloured Chassis'''
15: [[image:LaFonera_Hardware_coloured_chassis.jpg]]
18: ...ase-mods.linear1.org/category/painting/ linear1 case mods].
22: ...ith some light reflecting from it (monitor & a mouse) to give an idea of the finish. - Vxworkskiller de (757 bytes)
1: ...ven Firmware zu flashen ohne auf JTAG oder andere hardware modifikationen zurückzugreifen - Instalación en el enrutador Motorola WR850G (7,207 bytes)
1: El router Motorola WR850G esta basado en hardware muy similar al Linksys WRT54G, excepto que almace...
4: ...ción sobre la version al reverso, esta basado en hardware levemente distinto, y (al menos con DD-WRT v23fin...
6: ...omenzando con algunas versiones v23SP1, conoce el hardware (como detectarlo, que valores de fábrica estable...
12: ...s funcionalidades de la versión completa y puede ser suficiente para la mayoria de los usuarios.<br>
14: ...motorola.com/consumers/support/default.asp?supportSection=HomeNetworking firmware Motorola] a esta ver... - Instalación en el enrutador WRT54G(S) versión 5 (8,885 bytes)
5: Yo he seguido el proceso de [http://www.scorpiontek.org/po...
8: ...riza otro servidor DHCP antes de empezar. Procura sea en la subred 192.168.X.X/16 para poder acceder a...
10: .../linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=3176 (en inglés)</p>
15: ...ear el router a los ajustes de fabrica (botón trasero)
20: * Seleccionar el fichero <code>vxworks_prep_v03.bin</c... - Netgear WNDR4500 (3,670 bytes)
2: = Hardware Specs =
69: ...Peacock announcement] for reference on Broadcom-based routers.<br>
76: ... router, wait for Power light to go green, then reset router:<ol>
77: ...eset switch with a straightened paper clip for 20 seconds.</li>
78: <li>After releasing Reset switch, router should reboot with much flashing ... - 什么是 "DD-WRT"? (53,158 bytes)
5: ... 又是基于 [[wikipedia:GNU_General_Public_License|GPL]] 的 Linksys固件及许多其它开源程...
37: ! [[:Category:Applications|Serv-<br>ices]]
49: | <!-- Services: -->
61: | <!-- Services: -->
73: | <!-- Services: --> - Optware (46,421 bytes)
4: ...le (as of 2015). It is called 'Entware'. For more see: [[Installing_Entware|Installing Entware]] or [h...
7: Please note:
8: ... That Brainslayer disabled FPU emulation in changeset 20047 which breaks Optware on DD-WRT.
13: If you still want to use Optware:
14: ... more updated, user-friendly tutorial, on how to use optware on older DD-WRT builds (until build [htt... - Quick list of Optware packages (104,401 bytes)
5: ... is a text-based addressbook program designed to use with mutt mail client.
7: ...r - 1.10.3-1 - a multi-call binary for login and user account administration
16: * analog - 6.0-2 - The most popular logfile analyser in the world.
17: ...CKS server and client library for writing proxy-based applications.
18: * apache - 2.2.18-1 - The most popular web server on the internet - Development (20,697 bytes)
3: ...m Firmware Modification Kit]. This kit gives the user the ability to make changes to a firmware image ...
6: ... file systems can be supported with tweaks). The user can then make modifications to the extracted fil...
10: ...ages (remember, packages pre-installed are compressed much better)
14: ...ING: Due to abuse by those re-branding DD-WRT and selling it, or pre-flashed routers with it on eBay, ...
17: ...irst time you run one of the scripts. Any machine set up to build anything C or C++ on the machine wil... - 刷新您的Buffalo WBR-G54,WLA-G54,WBR2-G54,WBR2-G54S... (5,336 bytes)
4: '''WARNING: Use only dd-wrt v23 final (25.dec.2005) or v23 SP1 fi...
10: ''WARNING: Reset button will not work''
22: ...a tftp after removing the first 35 bytes). A few users have reported success with a later version of B...
28: ...ded Buffalo header. After successful transfer please wait 2-3 min., or until router reboots.
31: Inspecting the original Buffalo firmware one can see the custom header (before HDR0). - MN-700 (10,914 bytes)
3: ...WRT, a new bootloader must be installed through a hardware hack (until someone comes up with a WinCE killer ...
11: ...re wondering, the MN-500 has completely different hardware than the MN-700, so the instructions provided by ...
14: ...eariler are not supported on the MN-700. Please use build SVN 3953 (link below) or higher. Earlier bu...
18: ...e hardware hack guides listed in the Introduction section above to get the [http://support.asus.com/do...
20: ...WRT in hardware restoration mode (hold down the reset button while powering on the WRT and wait until ... - Contribute (3,059 bytes)
3: ...the project is a programmer. But don't worry, a user such as you is just as important and can contrib...
6: ...lease visit the [[:Category:Developer resources]] section of the wiki.
9: ...nd an email to info@dd-wrt.com with your desired username, requesting a wiki account be created for yo...
14: ..., please use categories to make topics easily browseable. Any manually updated index pages tend to get...
15: ...y least (or other Category depending on language used). - Firmware FAQ (40,468 bytes)
6: ...ary|Glossary]]. If you still don't know, search elsewhere on the internet or ask on the forums.
10: ..._devices|Known incompatible devices]]. Otherwise search the forums.
14: ... least 8mb flash, and for better speeds use ARM-based routers.
24: ...zn.to/3kwfYCD '''Linksys EA8500'''] - may require serial console to flash due to locked firmware
31: One can also search on Amazon for [https://amzn.to/2rbkGt2 DD-WRT... - Known incompatible devices (18,777 bytes)
8: *it is based on a Texas Instruments (TI) chipset
9: ...ed on a Marvell chipset (exception Linksys WRT AC Series)
10: *it is based on a Ubicom chipset
11: *it is based on a Realtek chipset
12: *it is based on a Broadcom 63xx chipset - Bountiful BWRG1000 (105 bytes)
3: [[Category:Networking hardware tutorials]] - Version 5 And 6 Router Information (5,963 bytes)
1: ...cluding the most relevant and valuable links. Please add information, including new links you find tha...
7: ...ces we'll call these models "neutered". Why? Because they've had some crucial functionality removed by...
10: Version 5.0 Serial number begins with: CDFB<br />
11: Version 5.1 Serial number begins with: CDFC<br />
12: Version 6.0 Serial number begins wtih: CDFD<br /> - Reset And Reboot (4,732 bytes)
1: {{Languages|Reset And Reboot}}
3: ...his page is an attempt to clarify the different resets and reboots. You'll find other related and valu...
5: === Hard Reset ("30 reset")===
6: ...fferent ways that users are doing hard resets. Those methods '''will not unflash your router to the de...
7: They will reset to defaults such settings as IP address or password. - D-Link DIR-615 rev C (10,866 bytes)
4: =Hardware=
6: ...self. This means it's quick and easy to check the hardware revision before buying or borrowing it.
8: ...ctory default IP for this router is 192.168.0.1, user is "admin", password is blank.
10: ==Pros of this hardware==
11: * 4 MB board, so no need to use "micro" DD-WRT builds. - Internal device network (4,651 bytes)
1: ... internal network connects the internal physical(=hardware):
5: ...vice networks|default internal device network and services]].
8: ...rconnected with each other and with your software services.
10: ... PC's ip settings - try release/renew the dhcp lease if not ok):
12: ...art the device, because it might just be a device service that need to be restarted. - Miscellaneous/zh cn (971 bytes)
3: ...for all the things that just don't fit anywhere else.
10: ...ages that describe specific hardware with only loose
21: * [[Hardware#NVRAM|NVRAM]]
23: * [[Hardware#Overclocking|路由器超频]]
25: * [[Hardware#Hardware_Modifications|硬件改造]] - LaFonera Hardware SD-Card (6,579 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / SD-Card'''
11: ===Purpose===
16: A kernel module is required in order to use the MMC hack.
17: .../ OpenWRT] or compile [http://fghhgh.150m.com/ these] using the toolchain on your LaFonera. - LaFonera Hardware Power-Sources (2,124 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Power-Sources'''
9: You can even use a LiIon battery and a stepup circuit. (or power L...
11: For those willing to take the LiIon approach, make sure you...
14: To build my battery pack, I used an LM7805A, an external SCSI Zip 100 drive power... - Linksys WRT54G/GL/GS/GX (4,360 bytes)
6: ...box or the underside of the router) represent the hardware revision:
22: CDFF = WRT54G v8.0 (purchased 2007-6-4 New Jersey Best Buy)<br>
23: CDFG = WRT54G v8.0 (purchased 7-16-2007 Hemet Staples)<br>
47: See more information on the [http://www.linksysinfo....
54: See [[Linksys WRT54G v1.0 & 1.1]] page. - Linksys WRT54GS v7.0 & 7.2 (5,118 bytes)
1: '''This is for the GSv7.x NOT the Gv7.x. See here: [[Linksys_WRT54G/GL/GS/GX]]'''
3: ==Hardware==
16: ... the Windows Features section, and scroll down to select TFTP Client to enable it.
19: # Set a static IP address (outside DHCP range e.g. 192...
23: #*# Select "Use the following IP address" to set a static IP (e.g. 192.168.1.10, subnet 255.255.2... - Installation/ja (27,080 bytes)
7: ...: http://www.dd-wrt.com/site/support/router-database
15: ...イスの場合、デバイス固有の情報が[[Hardware-specific]]ページで見つかるかもしれま...
24: ...とはいえ、ピーコック スレッドと [[Hardware-specific|ハードウェア固有の情報]]ペ...
26: ...クページの背景を知ったあとでは、[[Hardware-specific|ハードウェア固有の情報]]ペ...
29: ... just going by what model you think you have - [[User:Clock|clock]]. - D-Link DIR-400 (5,069 bytes)
5: ==[https://wikidevi.wi-cat.ru/D-Link_DIR-400_A1 Hardware] Specifications==
34: # See [[Index:FAQ#Where_do_I_download_firmware.3F|Wher...
35: ...ham/putty/download.html Putty] client or you can use any telnet clients(try to stay away from Windows ...
43: <li> Prepare Putty telnet session -- 192.168.0.1 port 9000</li>
45: ...successful ping''' and then initiate putty telnet session.</li> - Gateworks Avila/Cambria Installation (14,682 bytes)
5: ... font-weight:bold'>Please note: The details in these instructions apply specifically to the GW2348-4 b...
6: ...ifferences in the flashing commands you must use. See the
9: The Gateworks GW234x series Network Processor boards provide an excellent...
13: For more information see: [[Avila Gateworks GW234x]]
16: * Computer (I use a laptop with wireless internet connectivity as w... - Linksys WAP54G Hardware Spec (3,039 bytes)
4: Serial No: MDG0035...<br><br>
5: Hardware spec:<br>
28: * Several thin cabel
37: ...er), and GND of the metal casing for the SES or Reset button.
42: For this module I used gpio: 3,4,6 and 7 - Mikrotik Routerboard RB/532 (3,688 bytes)
6: ...operation of the unit. Compared to Geode SC1100 based boards (e.g. [http://www.soekris.com/net4801.htm...
8: From the base configuration of 3 Ethernet ports and 2 MiniPCI s...
10: ...ian GNU/Linux image and source available) can be used to operate this board. This board is also compa...
18: ...rnet switch ports controlled by the VIA/Rhine chipset incur a high CPU usage and limit usable bandwidt...
22: ''please note, this information was more or less copied fr... - Supported Devices (242,466 bytes)
6: '''DO NOT TRUST THIS LIST, NOR THE ROUTER DATABASE, TO HAVE THE MOST UP-TO-DATE INFORMATION!'''
8: ...really bad builds for your router hardware and cause a lot of issues.
10: '''Always use the newest beta build first, then work your way b...
12: ..."beta" FTP/HTTPS site to see if you can find your hardware.
13: ...ee how they work for a particular piece of router hardware. - AutoAP (11,662 bytes)
5: ...RT54* series routers and their clones. See Links section at the bottom of this page for further infor...
7: ...ghly configurable, including ability to configure secure connections.
9: Typically, you would use this script on your router while in [[UWR | Repea...
14: ... use the [[Web Interface]]<br>
15: ... setup [[UWR | Repeater Mode]], [[Client_Mode_Wireles... - Linksys WRTSL54GS (13,481 bytes)
2: ... are open for many different applications of this hardware.
9: Release: 09/15/06 (SVN revision: 3932)
31: ...lesystem 1k-blocks Used Available Use% Mounted on
43: Release: 05/24/08 (SVN revision: 9526)
67: Setting the PFC to its default value - Micro-plus (26,693 bytes)
4: ...d-wrt micro originally created for debugging purposes, on devices having only 2MB of flash memory. It...
20: Micro-plus is currently not an official release of the stable tree, but with your help, we hope t...
35: Usage: ssh [options] [user@]host[/port][,[user@]host/port],...] [command]
38: -l <username>
44: -s Request a subsystem (use for sftp) - LaFonera Info Hardware-Specifications (3,830 bytes)
3: ...Fonera_(en)|LaFonera]] / [[LaFonera_Info|Info]] / Hardware-Specifications'''
5: == The Hardware Specifications ==
12: * Antenna Connector: RP-SMA Connector (Reverse SMA)
17: * Reset Switch
31: * No extra pad for a second antenna. Possible internal PCB antenna? - LaFonera (en) (6,555 bytes)
13: ...=48px | height=48px }} <!--Feel free to change these icons-->
16: ...=Yast_hardware_info.png | link=:Category:LaFonera_Hardware_(en) | width=48px | height=48px }}
17: ...Fonera_Hardware_(en)|LaFonera Hardware]]''' <br/> Hardware related documentation
24: ...r that the [http://en.wikipedia.org/wiki/FON FON] service utilizes in order to spread Wi-Fi to whereve...
32: ...ssfully flashed r29218 and have no problems. - [[User:Harre|Harre]] 14:51, 16 March 2016 (CET) - LaFonera Software Flashing (30,993 bytes)
1: .../secure.dd-wrt.com/dd-wrtv3/dd-wrt/downloads.html secure version]) to ensure that you are getting the ...
12: ...rial and change this or flash your device through serial.<br />
20: ...nd Linux, SSH is built in. Open Terminal.app and use "ssh".
23: ...Linux, telnet is built in. Open Terminal.app and use "telnet".
26: ...h=downloads%2Fobsolete%2Frelease+candidates/ release candidate]
View (previous 100) (next 100) (20 | 50 | 100 | 250 | 500).