Search results
From DD-WRT Wiki
You searched for Hardware/ja
For more information about searching DD-WRT Wiki, see Help.
Showing below up to 250 results starting with #1.
View (previous 250) (next 250) (20 | 50 | 100 | 250 | 500).
Article title matches
- Hardware (18,720 bytes)
1: {{Languages|Hardware}}
111: ...ercial Untangle on a custom PC is better than any hardware router. (although the reliability is much less an...
149: ...ed incorporating SFE (and very likely a number of hardware manufacturers as well) Today, SFE is enabled by ...
151: ...claims up to 10Gbt packet handling ability on x86 hardware.
153: ...w Acceleration (FA) was handled by adding special hardware into it's devices with gigabit Ethernet ports tha... - LaFonera Hardware serial to ethernet (1,034 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / serial to ethernet''' - LaFonera Hardware i2c (6,202 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / i2c'''
10: [[Image:LaFonera_Hardware_i2c_-_01_overview.jpg]]
82: [[Image:LaFonera_Hardware_i2c_-_02_sensor.jpg]]
89: [[image:LaFonera_Hardware_i2c_-_03_PCB.jpg]] - LaFonera Hardware Coloured Chassis (2,817 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Coloured Chassis'''
15: [[image:LaFonera_Hardware_coloured_chassis.jpg]]
37: ...me ''Rubbing Compound'' from Canadian Tire or any hardware/automotive parts store (it is roughly equivalent ... - LaFonera Hardware SD-Card (6,579 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / SD-Card'''
50: [[Image:LaFonera_Hardware_SD-Card_-_01_overview.jpg|the finished result]]
72: [[Image:LaFonera_Hardware_SD-Card_-_02_sd-card_reader.jpg|sd-card-reader de...
81: [[Image:LaFonera_Hardware_SD-Card_-_03_fonera_detail.jpg|LaFonera detail]] - LaFonera Hardware Power-Sources (2,124 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Power-Sources''' - Linksys WAP54G Hardware Spec (3,039 bytes)
5: Hardware spec:<br> - LaFonera Info Hardware-Specifications (3,830 bytes)
3: ...Fonera_(en)|LaFonera]] / [[LaFonera_Info|Info]] / Hardware-Specifications'''
5: == The Hardware Specifications ==
32: * Serial port on JP1. Pin closest to Ethernet jack is GND, RX, TX, Power. (I may have RX and TX s...
90: Pin furthest from Ethernet jack is 1.<br>
95: ...rg/OpenWrtDocs/Hardware/Fon/Fonera Fonera OpenWRT Hardware Docs - LaFonera Hardware Second-Antenna (7,482 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Second-Antenna''' - LaFonera Hardware JTAG (268 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
4: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / JTAG'''
7: For now take a look at [[LaFonera_Hardware_IO_(en)]] - LaFonera Hardware USB (9,766 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / USB'''
13: ... LaFonera, so read this article first: [[LaFonera_Hardware_Serial-Cable-Port]].
55: [[Image:LaFonera_Hardware_Serial-Cable-Port_03.jpg|left]] - LaFonera Hardware Power-over-Ethernet (3,201 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Power-over-Ethernet''' - LaFonera Hardware Serial-Cable-Port (6,917 bytes)
1: [[Category:LaFonera_Hardware_(en)]]
2: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Serial-Cable-Port'''
7: | [[Image:LaFonera_Hardware_Serial-Cable-Port_01.jpg]]
17: See [[LaFonera_Hardware_Disassembling|LaFonera Hardware Disassembling]] for how to dissassemble your rout...
19: [[Image:LaFonera_Hardware_Serial-Cable-Port_02.jpg]] - LaFonera Hardware Disassembling (1,764 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Disassembling'''
8: | [[Image:LaFonera Hardware Disassembling 01.png]]
20: [[Image:LaFonera Hardware Disassembling 02.jpg]]
28: [[Image:LaFonera Hardware Disassembling 03.jpg]] - LaFonera Hardware (49 bytes)
1: #REDIRECT [[:Category:LaFonera_Hardware_(en)]]''' - Hardware DIY (1,115 bytes)
1: {{Languages|Hardware_DIY}}
3: ==Hardware List==
5: ...the Hardware link at the bottom of the page. Some hardware mods are located on their router's particular wik...
13: [[Category:Hardware]] - LaFonera Hardware Cooling-System (11,159 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Cooling-System''' - LaFonera Hardware Controlling AC-Loads (4,663 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Controlling AC-Loads'''
15: == Hardware ==
18: [[image:LaFonera_Hardware_Controlling_AC-Loads_-_01_ready_to_start.jpg]]
20: [[media:LaFonera_Hardware_Controlling_AC-Loads_-_highres_01_ready_to_start.... - LaFonera Hardware Roboter Controlling (2,339 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Roboter Controlling'''
15: == Hardware ==
18: [[image:LaFonera_Hardware_Roboter_Controlling_-_03_complete_robot_front.jpg...
20: [[media:LaFonera_Hardware_Roboter_Controlling_-_highres_03_complete_robot_f... - LaFonera Hardware Logo-Removal (2,569 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Logo-Removal'''
5: ...a_Hardware_Logo-Removal_(de)|deutsch]] [[LaFonera_Hardware_Logo-Removal_(fr)|français]]
29: # [[LaFonera_Hardware_Disassembling|Remove the white cover from the LaF...
39: See the [[Talk:LaFonera_Hardware_Logo-Removal|discussion page]] for previously sug... - LaFonera Hardware Replace LEDs (6,702 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Replace LEDs'''
5: ...a_Hardware_Replace_LEDs_(de)|deutsch]] [[LaFonera_Hardware_Replace_LEDs_(fr)|français]]
29: [[image:LaFonera_Hardware_Replace_LEDs_-_08_preparation.jpg]]
31: [[media:LaFonera_Hardware_Replace_LEDs_-_highres_08_preparation.jpg|view in... - LaFonera Hardware Logo-Removal (de) (2,955 bytes)
2: [[Category:LaFonera_Hardware_(de)]]
3: ...Fonera_(de)|LaFonera]] / [[LaFonera_Hardware_(de)|Hardware]] / Logo-Entfernung'''
5: ...a_Hardware_Logo-Removal_(de)|deutsch]] [[LaFonera_Hardware_Logo-Removal_(fr)|français]]
32: # [[LaFonera_Hardware_Disassembling|Entferne die Abdeckung der LaFonera...
42: werden auf der englischen [[Talk:LaFonera_Hardware_Logo-Removal|Diskussions Seite]] vorgestellt. Die... - LaFonera Hardware Logo-Removal (fr) (2,529 bytes)
2: [[Category:LaFonera_Hardware_(fr)]]
3: ...Fonera_(fr)|LaFonera]] / [[LaFonera_Hardware_(fr)|Hardware]] / Logo-Removal'''
5: ...a_Hardware_Logo-Removal_(de)|deutsch]] [[LaFonera_Hardware_Logo-Removal_(fr)|français]]
30: # [[LaFonera_Hardware_Disassembling|Remove the white cover from the LaF...
39: See the [[Talk:LaFonera_Hardware_Logo-Removal|discussion page]] for previously sug... - LaFonera Hardware (de) (46 bytes)
1: #REDIRECT [[:Category:LaFonera_Hardware_(de)]] - LaFonera Hardware (fr) (49 bytes)
1: #REDIRECT [[:Category:LaFonera_Hardware_(fr)]]''' - LaFonera Hardware 32MB SDRAM MOD (5,063 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / 32MB SDRAM MOD''' - LaFonera Hardware Replace LEDs (de) (6,319 bytes)
1: [[Category:LaFonera_Hardware_(de)]]
2: ...Fonera_(de)|LaFonera]] / [[LaFonera_Hardware_(de)|Hardware]] / Replace LEDs'''
4: ...a_Hardware_Replace_LEDs_(de)|deutsch]] [[LaFonera_Hardware_Replace_LEDs_(fr)|français]]
28: [[image:LaFonera_Hardware_Replace_LEDs_-_08_preparation.jpg]]
30: [[media:LaFonera_Hardware_Replace_LEDs_-_highres_08_preparation.jpg|view in... - LaFonera Hardware Replace LEDs (fr) (5,848 bytes)
2: [[Category:LaFonera_Hardware_(fr)]]
3: ...Fonera_(fr)|LaFonera]] / [[LaFonera_Hardware_(fr)|Hardware]] / Replace LEDs'''
5: ...a_Hardware_Replace_LEDs_(de)|deutsch]] [[LaFonera_Hardware_Replace_LEDs_(fr)|français]]
27: [[image:LaFonera_Hardware_Replace_LEDs_-_08_preparation.jpg]]
29: [[media:LaFonera_Hardware_Replace_LEDs_-_highres_08_preparation.jpg|Version... - LaFonera Hardware Power from USB (8,045 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Power from USB'''
6: The LaFonera is a nice piece of hardware, but it is somewhat limited by its power supply w...
8: As we know from looking at the hardware specifications for the LaFonera, it takes DC powe... - LaFonera Hardware New Paint Job (1,237 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / New Paint Job''' - LaFonera Hardware IO (en) (4,576 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / IO'''
13: ...: http://wiki.openwrt.org/OpenWrtDocs/Customizing/Hardware/JTAG_Cable and here: http://tech.am/2006/10/06/au...
39: ...: http://wiki.openwrt.org/OpenWrtDocs/Customizing/Hardware/JTAG_Cable
48: ...rom http://www.dd-wrt.com/wiki/index.php/LaFonera_Hardware_Serial-Cable-Port) - LaFonera Hardware Modding (636 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Modding'''
7: [[Image:LaFonera_Hardware_Modding_-_01_front.jpg]]
9: [[Image:LaFonera_Hardware_Modding_-_02_side.jpg]]
11: [[Image:LaFonera_Hardware_Modding_-_03_ahead.jpg]] - Hardware-Specific/zh cn (32 bytes)
- Hardware-specific/zh cn (32 bytes)
- LaFonera hardware New Paint Job (45 bytes)
1: #REDIRECT [[LaFonera Hardware New Paint Job]] - LaFonera Hardware (en) (49 bytes)
1: #REDIRECT [[:Category:LaFonera_Hardware_(en)]]''' - LaFonera Hardware IO (39 bytes)
1: #REDIRECT [[LaFonera Hardware IO (en)]] - LaFonera Hardware Controlling AC-Loads via webinterface (4,497 bytes)
1: [[Category:LaFonera_Hardware_(en)]]
2: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Controlling AC-loads via web-interface'''
31: : [[Image:LaFonera_Hardware_Controlling_AC-Loads_via_webinterface_-_04_overvi...
40: : [[Image:LaFonera_Hardware_Controlling_AC-Loads_via_webinterface_-_05_web-in...
46: : [[Image:LaFonera_Hardware_Controlling_AC-Loads_via_webinterface_-_06_web-in... - LaFonera Hardware SD-Card/Reader Position (6,152 bytes)
1: ...ry:LaFonera_Hardware_(en)|Hardware]] / [[LaFonera Hardware SD-Card|SD-Card]] / Reader Position'''
10: ...ad both) card reader to take apart, or [[LaFonera_Hardware_SD-Card#Cheap_SD_Card_.22reader.22_.28floppy_cabl...
60: ...you can follow the instructions on the [[LaFonera_Hardware_SD-Card]] page to wire up your reader to the Fone... - LaFonera Hardware LCD Screen (3,119 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / LCD Screen'''
9: [[Image:LaFonera_Hardware_LCD_Screen_-_01_fonera_LCD.jpg]]
25: [[Image:LaFonera_Hardware_LCD_Screen_-_02_wan_LED.jpg]]
27: [[Image:LaFonera_Hardware_LCD_Screen_-_03_schematic.gif]] - LaFonera Hardware IR Receiver (4,545 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / IR Receiver'''
13: [[Image:LaFonera_Hardware_IR_Receiver_-_01_pcb.jpg]]
16: Hardware part is very simple. You need an AVR Attiny2313 f...
33: ...then configure <span style="color:red;">/etc/lirc/hardware.conf</span> : - LaFonera Hardware LaFoneraPlus (12,883 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / LaFoneraPlus'''
10: [[image:LaFonera_Hardware_LaFoneraPlus_-_01_case.jpg]]
15: [[image:LaFonera_Hardware_LaFoneraPlus_-_02_atheros_chip.jpg]]
17: On the hardware side we see lot of well know things : same CPU At... - Hardware-specific (5,910 bytes)
1: {{Languages|Hardware-specific}}
3: ...formation. Please also see [[:Category:Networking hardware tutorials]] and [[Supported_Devices]] for links t...
7: =Hardware Brand=
49: *[[Linksys Serial numbers|Identifying Hardware Versions]]
196: [[Category:Networking hardware tutorials]] - OpenVPN Router to Router Bridged Configuration Alternative (Hardware VPN) (5,716 bytes)
1: ...uter to Router Bridged Configuration Alternative (Hardware VPN) ===
2: (for hardware "like" vpn access for multiple computers or appli...
6: This will allow for hardware like VPN access on the client side to more than o...
98: --[[User:S19303cc|S19303cc]] 20:29, 16 January 2011 (CET) - Hardware DIY/ru (33 bytes)
- Hardware DIY/zh cn (541 bytes)
1: {{Languages|Hardware_DIY}}
11: * [[:Category:LaFonera_Hardware_%28en%29|La Fonera的硬件摩丁部落]] - Hardware/ru (2,765 bytes)
1: {{Languages|Hardware}}
51: [[Category:Hardware/ru| ]] - Hardware-specific/fr (567 bytes)
1: {{Languages|Hardware-specific}}
4: ...omplète''' en anglais cliquez sur ce lien : '''[[Hardware-specific]]'''
Page text matches
- DD-WRT Doku (DE) (83,042 bytes)
25: ...//www.dd-wrt.com/wiki/index.php/Supported_Devices Hardware-Support-Liste]''.
145: | keine ([http://wiki.openwrt.org/OpenWrtDocs/Hardware/Siemens/SE505#line-120 USB-Mod])
208: ...//www.dd-wrt.com/wiki/index.php/Supported_Devices Hardware-Support-Liste]
409: ...mir einen '''Linksys WRT54G/GS/L''' der richtigen Hardwareversion (s. u.) anschaffen. Diesen bekomme ic...
457: ...e Verbindunsversuche starten (die Verbindung wird ja sowieso gleich gekappt (in Schritt 3) <br> - Hinzufügen eines SD-Kartenlesers an den Linksys WRT54G (20,102 bytes)
19: * ein Linksys WRT54G (Hardware Revision < v5)
92: ...auchen wir wirklich alle Bilder doppelt von einer Hardware Revision? Und muessen die so riesig und unscharf ...
204: drwxr-xr-x 1 root root 0 Jan 1 00:08 .
205: drwxr-xr-x 1 root root 0 Jan 1 00:01 ..
206: lrwxrwxrwx 1 root root 28 Jan 1 00:01 et.o -> /rom/lib/modules/2.4.20/et.o - Verizon FIOS setup with dd-wrt as primary router (5,626 bytes)
82: [[Category:Networking hardware]] - Hardware (18,720 bytes)
1: {{Languages|Hardware}}
111: ...ercial Untangle on a custom PC is better than any hardware router. (although the reliability is much less an...
149: ...ed incorporating SFE (and very likely a number of hardware manufacturers as well) Today, SFE is enabled by ...
151: ...claims up to 10Gbt packet handling ability on x86 hardware.
153: ...w Acceleration (FA) was handled by adding special hardware into it's devices with gigabit Ethernet ports tha... - Hauptseite (3,948 bytes)
52: ...er Sharing X86 Based]] (Drucker Sharing trotz X86 Hardware und V24SP1)
54: ==Hardware-bezogene Beschreibungen==
84: ...finden und benutzen: stellt euch ein dynamisches, Java-basiertes Interface vor, mit dem man Netzwerke ... - Recover from a bad flash (41,673 bytes)
34: ...le, switch the router off first (remove the power jack) and remove all network cables from the equipme...
40: ...F9wdj0mcF9jdj0mcF9zZWFyY2hfdHlwZT1hbnN3ZXJzLnNlYXJjaF9ubCZwX3NjZl9sYW5nPTEmcF9wYWdlPTEmcF9zZWFyY2hfdGV...
50: ...eem to have this ability on other versions of the hardware, so you might find it works anyway.
187: ...oldwiki.openwrt.org/OpenWrtDocs(2f)Customizing(2f)Hardware(2f)JTAG_Cable.html OpenWRT wiki]. Then download t...
207: ...ese all have MAC addresses that DO NOT MATCH your hardware. Use the CFE editing tool "IMGTOOL_NVRAM" availa... - Glossary (58,851 bytes)
92: === ClickJacking===
94: Clickjacking occurs when a user a user accidently clicks ...
96: ...o-fight-clickjacking-attacks/ How to prevent ClickJacking]
198: Software or hardware that limits network activity. There are differen...
203: ...ry ROM image that has to be copied down onto your hardware (WRT54G) over a cable. The cable is usually an et... - WDS Linked router network (21,712 bytes)
27: ...in_Page and look up the model number and specific hardware revision. Ex: Archer A7 v5.x
247: ...xamples were minimally tested using the following hardware / firmware on 1/12/2011: - Linksys EA6500 V1 (23,843 bytes)
90: ...de for the V2. If you have a EA6500 V2, check the hardware specific page or the forum for support</font><p><...
200: * Making sure you have the [[#Find_your_hardware_version | V1 router]]<br>
201: ===Find your hardware version=== - Kismet Server/Drone (18,210 bytes)
150: ...ange it to "allowedhosts=192.168.1.0/24" (Network-Hardware-IPs: 192.168.1.1 -> 192.168.1.254 Subnet-Mask: 25... - Chillispot (36,851 bytes)
133: ...box could not handle that level of traffic due to hardware limitations. A dedicated VDSL2 Fritzbox 7570 hand...
149: ;Hardware: WHR-HP-G54
258: ...up commands set higher. (Only the WHR-HP-G54 with hardware mods.)
366: ... (only on WHR-HP-G54 Buffalo/updated routers with hardware modification)
386: ...ication of clients by their WLAN or LAN card MAC (hardware) address. Not used in this guide. - Wl command (24,951 bytes)
3: ...e routers firmware to access and control wireless hardware. It can be accesed from a [[Telnet/SSH_and_the_Co...
9: (For Atheros Hardware, this functionality is absent/less developed, and...
42: mark adapter down but do not reset hardware.
82: [hw|hardware] perform AES in hardware
378: Japan - Заводские установки (28,571 bytes)
7: ''Нужно объединить с [[Hardware#NVRAM]].
418: ...003:irc$PROT:002:l7$PORT:003:0:0< >$NAME:006:jabber$PROT:002:l7$PORT:003:0:0< >$NAME:004:jpe...
573: block_java=0
597: wl_country=Japan
674: wl0_country=Japan - Ipkg (tutorial) (10,613 bytes)
162: = Mipsel versus other hardware =
163: ...ra Software (en)|LaFonera]]) and Intel Xscale IXP hardware (e.g. [[Actiontec MI424WR|Actiontec MI424WR]]). ...
165: ...WRT is running on incompatible hardware. If your hardware requires non-mipsel format packages you will not ...
167: There are optware packages for a variety of hardware at [http://downloads.x-wrt.org/xwrt/kamikaze/sna...
173: To install a package on non-mipsel hardware:<br> - Index:Misc/ja (966 bytes)
18: * [[Hardware#NVRAM|NVRAM]]
20: * [[Hardware#Overclocking|Router Overclocking]]
22: * [[Hardware#Hardware_Modifications|Hardware modifications]]
28: * [[Linksys WAP54G Hardware Spec]]
32: [[Category:Documentation/ja]] - Separate LAN and WLAN (outdated) (15,234 bytes)
9: = Hardware = - IPv6 (tutorial) (36,148 bytes)
14: ...rrent recommended build of the firmware (see your hardware forum for recommendations) using [[What_is_DD-WRT...
43: ...hat you've to download still depends a lot on the hardware you're running on!
89: ... forum posts.--[[User:Fnord42|Fnord42]] 20:06, 14 January 2011 (CET) - Miscellaneous (1,602 bytes)
9: There are some pages that describe specific hardware with only a loose
34: * [[Hardware#NVRAM|NVRAM]]
36: * [[Hardware#Overclocking|Router Overclocking]]
38: * [[Hardware#Flow Acceleration,SFE and Cut-Through Forwarding|...
40: * [[Hardware#Hardware_Modifications|Hardware modifications]] - Firewall (8,046 bytes)
49: *vlan0(built-in hardware switch) software-bridged with eth1(wireless acces...
66: ...egory/linux/unix-security/iptables/ sns.ias.edu, James Stephens: Iptables] - Bootvorgang (68,911 bytes)
5: ... ich weiß noch nicht! Vielleicht gibt es ja was zu entdecken.<br>
205: EoU start time : Thu Jan 1 00:00:03 1970
804: -hwaddr=* Sets the hardware address (overrides environment)
1094: EoU start time : Thu Jan 1 00:00:03 1970
1213: out mark adapter down but do not reset hardware(disabled) - ¿Qué es DD-WRT? (4,318 bytes)
5: ...ainslayer@braincontrol.org BrainSlayer] y esta alojado en [http://www.dd-wrt.com/ dd-wrt.com]. Las pri...
13: ...ados, y soporte software para la modificación de hardware SD-Card.<br>
39: ...Card|MMC/SD Card Support]] (requiere modificar el hardware) - Kismet on Linux (4,875 bytes)
48: ...ld be different if running another version of the hardware - this works with v2.2 of the wrt54g). - Wrt54g kismet with linux server (9,309 bytes)
100: ...ld be different if running another version of the hardware - this works with v2.2 of the wrt54g). - Linksys WRT610N (11,615 bytes)
10: ...or Broadcom devices. It's responsible for initial hardware configuration and subsequent booting of the (Linu...
26: ... time on your WRT610N, you need to use a trailed (hardware-specific) build:
147: ...ernally accessible inside the "Internet" ethernet jack. Instructions for serial recovery are available... - Feature requests (17,201 bytes)
19: ... no longer be compatible, why not sell equivilant hardware capable of performing like the WRT54G/S. Market i...
192: ...igure from ms pocket internet explorer because of javascript stuffs. maybe i can choose a more friendl...
214: ...k encrypted with TrueCrypt. Hopefully the router hardware would be able to handle the crypto overhead. Ima... - Wiederbeleben (2,917 bytes)
15: ...R am Port 1 per TFTP geflasht werden. Bei einigen Hardware-Revisionen ist der Port 1 am Switch der 4. Slot.
81: [[Category:Flashing networking hardware/de]] - Wiki discussion (5,344 bytes)
7: ...ir models from the current main page. The various hardware specific guides can be found via the Miscellaneou...
11: ...are articles. --[[User:Jbrazio|jbrazio]] 00:02, 3 January 2009 (CET) - Espanol (5,507 bytes)
106: ...ar!#Suministrando Hardware o Dinero|Suministrando Hardware o Dinero]] - USB storage (55,588 bytes)
121: ...ptions are accessible via WEB-interface). If your hardware has flash 4MB or less - it may not include filesy...
200: ...t uses, and the special functionality and special hardware can be activated using the web-GUI. Due to the na...
316: ... string ''/dev/scsi/host0/bus0/target0/lun0'' is hardware specific, which is why you need to find this info...
321: ...rt2<br>brw------- 1 root root 8, 3 Jan 1 1970 part3<br>root@DD-WRT:~#<br>
1009: [[Category:Networking hardware tutorials]] - Wake-on-LAN (tutorial) (10,143 bytes)
4: ...his (especially the latter) is dependent upon the hardware and BIOS/UEFI settings. Most modern computers hav... - DD-WRT Docu (FR) (22,239 bytes)
169: * sur la 1ère fenêtre, il doit avoir marqué "Hardware Error"
175: ...ar "hardware error"... répond et recommence par "Hardware Error" c’est alors que vous aurez attendu trop ...
231: ==Modifications Hardware== - Buffalo WBR-G54 WLA-G54 WLA-G54C WBR2-G54 WBR2-G54S (8,489 bytes)
56: WLA-G54C hardware versions:
67: ...68.1.1 before continuing. These white soap boxes' hardware use this IP address in their bootloader. If you h... - DD-WRT Docu (IT) (14,289 bytes)
16: ...orto software per l'utilizzo di SD-Card (modifica hardware).
145: =Configurazioni speciali / Modifiche hardware=
189: ==Modifiche hardware==
190: ''Le modifiche hardware non sono necessariamente legate o compatibili con...
198: ...to sulla scatola del router) indicano la versione hardware: - VLAN Detached Networks each with Wireless and Internet (4,809 bytes)
13: ... 1 on the screen as this corresponds to port 4 in hardware.
14: * Early hardware: http://www.tonns.org/openwrt/WRTSL54GS_layout_re...
15: * GL hardware: http://garycourt.com/wp-content/images/WRT54_sw2... - TP Link Archer A7v5 (7,003 bytes)
1: ==HARDWARE==
14: ...ster, go back to stock which uses other dedicated hardware inside the A7v5 to improve network translation wh...
35: ...u'll need to [https://drive.google.com/open?id=1tjjahUwBGy-gYNCk1CFEJ1t7pOuIe3X5 grab the factory-to-d... - Återställ från en dålig flash (907 bytes)
8: ...s.com/download Linksys nerladdningssida], och följa den Linksys-tillåtna metoden av att ladda om fir...
10: [[Category:Flashing networking hardware/se]] - Debugging PPPOE Problems (2,511 bytes)
24: Jan 1 00:00:35 syslog.info syslogd started: Now DD...
59: line should display a session number and the hardware address - Useful Scripts (54,380 bytes)
50: Credit to hardwarewizard and frater
228: ^hardware
495: # Jan. '07 corrected bug from '06 improvement.
1094: To get this to work on Atheros hardware,
1152: # on Atheros hardware instead use: ifconfig ${INTERFACE} down - Recover from a bad flash/it (583 bytes)
12: [[Category:Flashing networking hardware/it]] - Switched Ports (21,983 bytes)
46: ==Explaining the connection between Hardware, VLANs, and NVRAM Variables==
50: ===Visible Hardware, Internal Ports, and VLANs===
51: First, let's describe how your router hardware is mapped to ports, bridges, ethernet devices, et...
78: ...-WRT has two default vlans that are mapped to the hardware:
91: ...ables. But you should be able to think about your hardware ports and internal port numbering (and vlan numbe... - Afterburner (1,547 bytes)
3: ... available on all DD-WRT enabled G routers. It is hardware independent. Afterburner will only improve speeds... - USRobotics USR5461 (11,735 bytes)
5: The major hardware features of USR5461 router are listed in this tab...
213: [[Category:Networking hardware tutorials]] - LaFonera Hardware serial to ethernet (1,034 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / serial to ethernet''' - Motorola WR850G (8,284 bytes)
3: The Motorola WR850G is based on very similar hardware to the Linksys WRT54G except that it stores the M...
5: The following instructions will only work with hardware versions v2 and v3 or the WR850G and the WR850GP....
7: ...n though DD-WRT v23 SP1 and later knows about the hardware it is being installed on, you risk bricking the r...
73: [[Category:Networking hardware tutorials]] - DD-WRT on WR850G v1 (deutsch) (17,039 bytes)
16: ...r Funktion her ähnlich wie das BIOS in einem PC: Hardwareinitialisierung, interaktive Einstellungen, Betrie...
116: ==Hardware== - WR850G v1 (26,232 bytes)
5: ... to fill them in - but make sure they apply to <b>hardware version 1</b> of the WR850G.</i>
12: ...ortunately, there are a few pitfalls if you own a hardware version 1 (the one with the AC/DC converter in th...
39: ...read the sources, I now know why: this particular hardware is not handled properly yet,
168: ...t?) is acting the same as the BIOS does for a PC: hardware init, interactive setup, boot operating system.<b...
242: <b>This is not limited to v1 hardware, and will assign strange MAC addresses.</b><br> - Airodump and using/overriding libraries (6,898 bytes)
41: ...brary which is definitely compatible with this os/hardware. It's best to search for an OpenWrt package, and ... - Spanning Tree Protocol (29,361 bytes)
211: ...r compatibility with industry standard commercial hardware. Priority is one of the "needs to play nice" ones... - Point-to-Point PPTP Tunneling usando dos DD-WRT (3,530 bytes)
3: ...siguiente configuracion fue hecha con dos wrt54g (hardware version 2.2) y el firmware "DD-WRT v23 SP1 (04/13... - Factory Defaults (25,206 bytes)
8: ''Merge needed with [[Hardware#NVRAM]].
29: ...firmware to repopulate it. On some less-supported hardware this may have unpleasant results.
32: ...p and TRULY "brick" an otherwise working piece of hardware this way. Every other avenue of unbricking should...
420: ...003:irc$PROT:002:l7$PORT:003:0:0< >$NAME:006:jabber$PROT:002:l7$PORT:003:0:0< >$NAME:004:jpe...
575: block_java=0 - Installation (20,950 bytes)
15: ...orted, you may find specific information in the [[Hardware-specific]] page for your router. However, '''to ...
23: ...specific]] page to '''accurately''' identify your hardware and not create a problem that renders your router...
25: ...gotten some background on the peacock page, the [[Hardware-specific]] page may be the most useful page for y...
28: * Use the '''brand-specific information in the [[Hardware-specific]]''' page to accurately identify which m...
29: ... and find the files you need. Again, check the [[Hardware-specific]] page for links to detailed instruction... - Netgear R9000 (8,270 bytes)
14: 10g interface - supported SFP hardware info: [https://forum.dd-wrt.com/phpBB2/viewtopic....
17: =[https://wikidevi.wi-cat.ru/Netgear_R9000 Hardware Specifications]=
141: ...ted by the fact that there are '''two''' internal hardware switches used by R9000 for routing traffic. Creat... - Accton (82 bytes)
1: Please refer to [[Installation]] and [[Hardware-specific]] pages for further info. - D-Link (234 bytes)
1: ...Category:Networking hardware tutorials|Networking hardware tutorials]] pages for further info. - Linksys WRT54G v2.2 (1,689 bytes)
3: ==Hardware Specifications== - USRobotics USR8200 (6,454 bytes)
110: =Hardware=
149: http://oldwiki.openwrt.org/OpenWrtDocs%282f%29Hardware%282f%29USRobotics%282f%29USR8200.html#head-e0357e...
150: http://wiki.openwrt.org/oldwiki/openwrtdocs/hardware/usrobotics/usr8200
152: [[Category:Networking hardware tutorials]] - Linksys WRT54G-TM (9,840 bytes)
8: ...WRT54G-TM and WRT54G-RG are identical in terms of hardware '''but not the firmware''' so the CORRECT FILES M...
146: == Hardware Mods == - Verizon FiOS - Using Your Own Router (6,751 bytes)
49: [[Category:Networking hardware]] - LaFonera Hardware i2c (6,202 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / i2c'''
10: [[Image:LaFonera_Hardware_i2c_-_01_overview.jpg]]
82: [[Image:LaFonera_Hardware_i2c_-_02_sensor.jpg]]
89: [[image:LaFonera_Hardware_i2c_-_03_PCB.jpg]] - What is DD-WRT? (20,620 bytes)
11: ... allocation, and software support for the SD-Card hardware modification.<br>
244: ..." | [[Glossary#MMC/SD Card|MMC/SD Card Support]] (hardware modification required) - Version Features (31,493 bytes)
8: ... information about which versions can run on your hardware. - WHR-HP-G54 (24,374 bytes)
36: hardware watchpoint : no
166: ...e you might miss out on a better result with your hardware. Look at SNR and do throughput tests.
193: == Hardware modifications ==
246: ...le in the WHR-HP-G54 case to allow for the second jack to show through.
289: ## RP-SMA pigtails, '''2 of them!''', with jacks for antennas, nothing on the other end. About ... - Hashes & Checksums (15,359 bytes)
243: [[Category:Flashing networking hardware]] - ¿Qué es "DD-WRT"? (11,698 bytes)
231: * Permite fijar un máximo de ancho de banda para cada direcció...
251: ...er - que tiene que pagar los costes del servidor, Hardware y otras cosas. - LaFonera Hardware Coloured Chassis (2,817 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Coloured Chassis'''
15: [[image:LaFonera_Hardware_coloured_chassis.jpg]]
37: ...me ''Rubbing Compound'' from Canadian Tire or any hardware/automotive parts store (it is roughly equivalent ... - Vxworkskiller de (757 bytes)
1: ...ven Firmware zu flashen ohne auf JTAG oder andere hardware modifikationen zurückzugreifen - Instalación en el enrutador Motorola WR850G (7,207 bytes)
1: El router Motorola WR850G esta basado en hardware muy similar al Linksys WRT54G, excepto que almace...
4: ...ción sobre la version al reverso, esta basado en hardware levemente distinto, y (al menos con DD-WRT v23fin...
6: ...omenzando con algunas versiones v23SP1, conoce el hardware (como detectarlo, que valores de fábrica estable...
16: Primero, baja el firmware específico para motorola desde [http...
18: ...index.php?path=dd-wrt.v23 SP1/ DD-WRT]. Puedes bajar el archivo zip (que contiene mas archivos de los... - Instalación en el enrutador WRT54G(S) versión 5 (8,885 bytes)
9: ..., antes de comenzar este proceso, que <b>puedes dejar tu router inutilizable si algo va mal.</b>
38: ...omáticamente por tres veces subir el ''firm''; dejalo hasta que acabe. Finalmente si ha tenido éxito...
42: ...a instalar WRT54G G/GS v5-v6 sin modificación de hardware. (en inglés)
49: ...a.org/wiki/JTAG Cable JTAG]. Este [http://forums.hardwarezone.com/showthread.php?p=18118180#post18118180 li...
51: ...dades de la versión "full".). Especificamente deja afuera lo siguiente: chillispot, nocat, rflow, ka... - Netgear WNDR4500 (3,670 bytes)
2: = Hardware Specs = - 什么是 "DD-WRT"? (53,158 bytes)
233: ..." | [[Glossary#MMC/SD Card|MMC/SD Card Support]] (hardware modification required)
746: ... information about which versions can run on your hardware. - Optware (46,421 bytes)
35: * Hardware
37: # WRT54g routers with hardware modification for MMC/SD card - Quick list of Optware packages (104,401 bytes)
22: ...ng in devices and applications. Supports embedded javascript, CGI, Virtu
110: * classpath - 0.98-1 - GNU Classpath for java
144: ...CUPS documentation, template and locale files for ja
237: ...le-based IM program that lets you sign on to AIM, Jabber, MSN, Yahoo!, and other IM networks. It uses ...
325: ...ible Markup Language) parser library designed for Jabber applications - Development (20,697 bytes)
205: ...ources for several linux kernel versions for each hardware platform, so be prepared for a very long download... - 刷新您的Buffalo WBR-G54,WLA-G54,WBR2-G54,WBR2-G54S... (5,336 bytes)
69: ...68.1.1 before continuing. These white soap boxes' hardware use this IP address in their bootloader. If you h... - MN-700 (10,914 bytes)
3: ...WRT, a new bootloader must be installed through a hardware hack (until someone comes up with a WinCE killer ...
11: ...re wondering, the MN-500 has completely different hardware than the MN-700, so the instructions provided by ...
18: # Follow one (or a combination) of the hardware hack guides listed in the Introduction section ab...
20: # Put the WRT in hardware restoration mode (hold down the reset button whil...
32: # Last, non-hardware based, resort when the unit won't boot due to a b... - Contribute (3,059 bytes)
21: ...ainSlayer]] — has to pay server costs, new hardware and, most importantly, food and shelter. - Firmware FAQ (39,448 bytes)
32: ... many many routers). Always go to the appropriate hardware device forum and look at the recent build reports...
40: ...mware builds are beta releases with no or limited hardware testing. '''Proceed with caution!'''
73: ...phically signed to verify authenticity, tested on hardware before upload, could upgrade via the command line...
105: ...e power light to be flashing, which tells you the hardware is probably not toasted yet. To test this, give y...
196: ...Some ISPs not using PPPoE expect the MAC address (hardware address) of the router to match that of your comp... - Known incompatible devices (18,777 bytes)
33: | '''Hardware<br>revision'''
1436: | '''Hardware<br>revision''' - Bountiful BWRG1000 (105 bytes)
3: [[Category:Networking hardware tutorials]] - Version 5 And 6 Router Information (5,963 bytes)
19: For more complete information on hardware revisions, visit Wikipedia:<br/>
20: http://en.wikipedia.org/wiki/Wrt54g#Hardware_revisions - Reset And Reboot (4,732 bytes)
16: ...firmware to repopulate it. On some less-supported hardware this may have unpleasant results, so use the foll...
21: ...d have unpleasant results "on some less-supported hardware". - D-Link DIR-615 rev C (10,866 bytes)
4: =Hardware=
6: ...self. This means it's quick and easy to check the hardware revision before buying or borrowing it.
10: ==Pros of this hardware==
13: * Fairly new hardware (released in 2009?), so it's widely available for...
15: * Easy to install DD-WRT on this hardware (just flash through the web interface as per belo... - Internal device network (4,651 bytes)
1: ... internal network connects the internal physical(=hardware):
8: Via the user interface you can modify how the hardware is logically interconnected with each other and w...
16: ...es are limited by the software implementation and hardware. - Miscellaneous/zh cn (971 bytes)
10: There are some pages that describe specific hardware with only loose
21: * [[Hardware#NVRAM|NVRAM]]
23: * [[Hardware#Overclocking|路由器超频]]
25: * [[Hardware#Hardware_Modifications|硬件改造]]
31: *[[Linksys WAP54G Hardware Spec|思科 Linksys WAP54G 硬件规格]] - LaFonera Hardware SD-Card (6,579 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / SD-Card'''
50: [[Image:LaFonera_Hardware_SD-Card_-_01_overview.jpg|the finished result]]
72: [[Image:LaFonera_Hardware_SD-Card_-_02_sd-card_reader.jpg|sd-card-reader de...
81: [[Image:LaFonera_Hardware_SD-Card_-_03_fonera_detail.jpg|LaFonera detail]] - LaFonera Hardware Power-Sources (2,124 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Power-Sources''' - Linksys WRT54G/GL/GS/GX (4,360 bytes)
6: ...box or the underside of the router) represent the hardware revision:
42: CGNE = WRT54GS v7.2 (Walmart, Jacksonville, FL - April 06, 2008)<br> - Linksys WRT54GS v7.0 & 7.2 (5,118 bytes)
3: ==Hardware== - Installation/ja (27,080 bytes)
15: ...イスの場合、デバイス固有の情報が[[Hardware-specific]]ページで見つかるかもしれま...
18: ...スの一覧については、'''[[Firmware FAQ/ja#.E3.81.A9.E3.81.AE.E3.83.AB.E3.83.BC.E3.82.BF.E3....
24: ...とはいえ、ピーコック スレッドと [[Hardware-specific|ハードウェア固有の情報]]ペ...
26: ...クページの背景を知ったあとでは、[[Hardware-specific|ハードウェア固有の情報]]ペ...
29: * Use the '''brand-specific information in the [[Hardware-specific]]''' page to accurately identify which m... - D-Link DIR-400 (5,069 bytes)
5: ==[https://wikidevi.wi-cat.ru/D-Link_DIR-400_A1 Hardware] Specifications== - Gateworks Avila/Cambria Installation (14,682 bytes)
234: [[Category:Networking hardware tutorials]] - Linksys WAP54G Hardware Spec (3,039 bytes)
5: Hardware spec:<br> - Mikrotik Routerboard RB/532 (3,688 bytes)
54: | IDT internal SoC hardware watchdog timer
58: Power jack/header 6..22V or 25..56V DC jumper selectable. ...
77: [[Category:Networking hardware tutorials]] - Supported Devices (240,439 bytes)
8: ...may actually be really bad builds for your router hardware and cause a lot of issues.
12: ..."beta" FTP/HTTPS site to see if you can find your hardware.
13: ...ee how they work for a particular piece of router hardware.
14: ...quotes with the word AND (in uppercase) plus your hardware or issue to perform your search.
34: If your hardware is not found below, it is probably not yet suppor... - AutoAP (11,662 bytes)
65: ...change the behavior of AutoAP script by setting [[Hardware#NVRAM|NVRAM]] variables. For example, let's set A...
75: What follows is a complete list of included [[Hardware#NVRAM|NVRAM]] variables and what they do (with de... - Linksys WRTSL54GS (13,481 bytes)
2: ... are open for many different applications of this hardware.
330: drwxr-xr-x 2 root root 32768 Jan 27 15:31 Recycled
331: drwxr-xr-x 3 root root 32768 Jan 14 08:45 System Volume Information
344: brw------- 1 root root 8, 0 Jan 1 1970 /dev/scsi/host0/bus0/target0/lun0/disc
345: brw------- 1 root root 8, 1 Jan 1 1970 /dev/scsi/host0/bus0/target0/lun0/part1 - Micro-plus (26,693 bytes)
28: Linux asus520gc 2.4.36 #2917 Thu Jan 1 11:12:02 CET 2009 mips unknown
55: drwxr-xr-x 2 root root 531 Jan 1 2009 .
56: drwxr-xr-x 6 root root 55 Jan 1 2009 ..
57: lrwxrwxrwx 1 root root 17 Jan 1 2009 [ -> ../../bin/busybox
58: lrwxrwxrwx 1 root root 17 Jan 1 2009 [[ -> ../../bin/busybox - LaFonera Info Hardware-Specifications (3,830 bytes)
3: ...Fonera_(en)|LaFonera]] / [[LaFonera_Info|Info]] / Hardware-Specifications'''
5: == The Hardware Specifications ==
32: * Serial port on JP1. Pin closest to Ethernet jack is GND, RX, TX, Power. (I may have RX and TX s...
90: Pin furthest from Ethernet jack is 1.<br>
95: ...rg/OpenWrtDocs/Hardware/Fon/Fonera Fonera OpenWRT Hardware Docs - LaFonera (en) (6,555 bytes)
13: |style="width:48px;"|{{Click || image=Gnome-dev-jazdisk.png | link=:Category:LaFonera_Software_(en) ...
16: ...=Yast_hardware_info.png | link=:Category:LaFonera_Hardware_(en) | width=48px | height=48px }}
17: ...Fonera_Hardware_(en)|LaFonera Hardware]]''' <br/> Hardware related documentation
89: * SD/MMC kernel module for [[LaFonera_Hardware_SD-Card|LaFonera SD-Card hack]] - (SD/MMC Driver) - LaFonera Software Flashing (30,993 bytes)
464: .../wiki.openwrt.org/OpenWrtDocs/Hardware/Fon/Fonera Hardware layout] of the LaFonera router. - LaFonera Hardware Second-Antenna (7,482 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Second-Antenna''' - LaFonera Hardware JTAG (268 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
4: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / JTAG'''
7: For now take a look at [[LaFonera_Hardware_IO_(en)]] - LaFonera Hardware USB (9,766 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / USB'''
13: ... LaFonera, so read this article first: [[LaFonera_Hardware_Serial-Cable-Port]].
55: [[Image:LaFonera_Hardware_Serial-Cable-Port_03.jpg|left]] - LaFonera Software Chilispot (12,365 bytes)
18: ...nd root.fs build of ddwrt for atheros WiSOC based hardware, I used root.fs and vmlinux.bin.l7 ((06/10/07) st... - LaFonera Hardware Power-over-Ethernet (3,201 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Power-over-Ethernet''' - LaFonera Hardware Serial-Cable-Port (6,917 bytes)
1: [[Category:LaFonera_Hardware_(en)]]
2: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Serial-Cable-Port'''
7: | [[Image:LaFonera_Hardware_Serial-Cable-Port_01.jpg]]
17: See [[LaFonera_Hardware_Disassembling|LaFonera Hardware Disassembling]] for how to dissassemble your rout...
19: [[Image:LaFonera_Hardware_Serial-Cable-Port_02.jpg]] - LaFonera Software Debricking (6,898 bytes)
18: ...d that’s about it. You can find some [[LaFonera Hardware Serial-Cable-Port | instructions for making a ser... - LaFonera Hardware Disassembling (1,764 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Disassembling'''
8: | [[Image:LaFonera Hardware Disassembling 01.png]]
20: [[Image:LaFonera Hardware Disassembling 02.jpg]]
28: [[Image:LaFonera Hardware Disassembling 03.jpg]] - LaFonera Software Universal-Repeater (25,850 bytes)
168: # nosbeacon disables the use of hardware beacon timers for ath1 - Siemens SE505 (3,810 bytes)
57: [[Category:Networking hardware tutorials]]
58: [[Category:Hardware]] - Hardware DIY (1,115 bytes)
1: {{Languages|Hardware_DIY}}
3: ==Hardware List==
5: ...the Hardware link at the bottom of the page. Some hardware mods are located on their router's particular wik...
13: [[Category:Hardware]] - SES Button (2,058 bytes)
53: [[Category:Networking hardware]] - LaFonera Hardware Cooling-System (11,159 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Cooling-System''' - LaFonera Software Client-Bridge (9,933 bytes)
30: HARDWARE - TESTED INFORMATION (MY CONFIGURATION) - LaFonera Hardware Controlling AC-Loads (4,663 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Controlling AC-Loads'''
15: == Hardware ==
18: [[image:LaFonera_Hardware_Controlling_AC-Loads_-_01_ready_to_start.jpg]]
20: [[media:LaFonera_Hardware_Controlling_AC-Loads_-_highres_01_ready_to_start.... - LaFonera Hardware Roboter Controlling (2,339 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Roboter Controlling'''
15: == Hardware ==
18: [[image:LaFonera_Hardware_Roboter_Controlling_-_03_complete_robot_front.jpg...
20: [[media:LaFonera_Hardware_Roboter_Controlling_-_highres_03_complete_robot_f... - How to open my router (2,424 bytes)
52: [[Category:Networking hardware]]
53: [[Category:Hardware]] - Default internal device network (6,480 bytes)
10: ...guration works like this ''(parenthesis are pre-N hardware)'':
12: The internal [[Separate_Lan_and_WLan#Hardware|network switch device]] has 6 [[Switched_Ports|po... - LaFonera Hardware Logo-Removal (2,569 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Logo-Removal'''
5: ...a_Hardware_Logo-Removal_(de)|deutsch]] [[LaFonera_Hardware_Logo-Removal_(fr)|français]]
29: # [[LaFonera_Hardware_Disassembling|Remove the white cover from the LaF...
39: See the [[Talk:LaFonera_Hardware_Logo-Removal|discussion page]] for previously sug... - LaFonera Hardware Replace LEDs (6,702 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Replace LEDs'''
5: ...a_Hardware_Replace_LEDs_(de)|deutsch]] [[LaFonera_Hardware_Replace_LEDs_(fr)|français]]
29: [[image:LaFonera_Hardware_Replace_LEDs_-_08_preparation.jpg]]
31: [[media:LaFonera_Hardware_Replace_LEDs_-_highres_08_preparation.jpg|view in... - JTAG pinouts (4,665 bytes)
66: [http://wiki.openwrt.org/OpenWrtDocs/Hardware/Buffalo/WBR-G54 WBR-G54 JTAG Info]
174: ...on if you have to fix the code to match your JTAG hardware<br> - Serial port pinouts (6,672 bytes)
92: NOTE: RevB is completely different hardware, based on Ralink RT3050 SoC. The serial port runs...
208: [[Category:Hardware]][[Category:Recovery]] - LaFonera (de) (7,731 bytes)
10: |style="width:48px;"|{{Click || image=Gnome-dev-jazdisk.png | link=:Category:LaFonera_Software_(de) ...
13: ...=Yast_hardware_info.png | link=:Category:LaFonera_Hardware_(de) | width=48px | height=48px }}
14: ...ardware]]''' <br/> Dokumentationen bezüglich der Hardware
84: * SD/MMC kernel module for [[LaFonera_Hardware_SD-Card|LaFonera SD-Card hack]] - (SD/MMC Driver)
117: ...ten auf Weihnachten, aber vielleicht kann einiges ja schon etwas früher in Erfüllung gehen. - LaFonera (fr) (6,073 bytes)
10: |style="width:48px;"|{{Click || image=Gnome-dev-jazdisk.png | link=:Category:LaFonera_Software_(fr) ...
13: ...=Yast_hardware_info.png | link=:Category:LaFonera_Hardware_(fr) | width=48px | height=48px }}
14: |'''[[:Category:LaFonera_Hardware_(fr)|LaFonera Hardware]]''' <br/> Documentation à propos du matériel
60: * SD/MMC: module pour le kernel pour [[LaFonera_Hardware_SD-Card|LaFonera SD-Card hack]] - (SD/MMC Driver)
85: ...our les interfaces virtuelles - BS: fonctionne déja, voir la page Sécurité. - LaFonera Hardware Logo-Removal (de) (2,955 bytes)
2: [[Category:LaFonera_Hardware_(de)]]
3: ...Fonera_(de)|LaFonera]] / [[LaFonera_Hardware_(de)|Hardware]] / Logo-Entfernung'''
5: ...a_Hardware_Logo-Removal_(de)|deutsch]] [[LaFonera_Hardware_Logo-Removal_(fr)|français]]
32: # [[LaFonera_Hardware_Disassembling|Entferne die Abdeckung der LaFonera...
42: werden auf der englischen [[Talk:LaFonera_Hardware_Logo-Removal|Diskussions Seite]] vorgestellt. Die... - LaFonera Hardware Logo-Removal (fr) (2,529 bytes)
2: [[Category:LaFonera_Hardware_(fr)]]
3: ...Fonera_(fr)|LaFonera]] / [[LaFonera_Hardware_(fr)|Hardware]] / Logo-Removal'''
5: ...a_Hardware_Logo-Removal_(de)|deutsch]] [[LaFonera_Hardware_Logo-Removal_(fr)|français]]
30: # [[LaFonera_Hardware_Disassembling|Remove the white cover from the LaF...
39: See the [[Talk:LaFonera_Hardware_Logo-Removal|discussion page]] for previously sug... - LaFonera Hardware 32MB SDRAM MOD (5,063 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / 32MB SDRAM MOD''' - LaFonera Hardware Replace LEDs (de) (6,319 bytes)
1: [[Category:LaFonera_Hardware_(de)]]
2: ...Fonera_(de)|LaFonera]] / [[LaFonera_Hardware_(de)|Hardware]] / Replace LEDs'''
4: ...a_Hardware_Replace_LEDs_(de)|deutsch]] [[LaFonera_Hardware_Replace_LEDs_(fr)|français]]
28: [[image:LaFonera_Hardware_Replace_LEDs_-_08_preparation.jpg]]
30: [[media:LaFonera_Hardware_Replace_LEDs_-_highres_08_preparation.jpg|view in... - LaFonera Hardware Replace LEDs (fr) (5,848 bytes)
2: [[Category:LaFonera_Hardware_(fr)]]
3: ...Fonera_(fr)|LaFonera]] / [[LaFonera_Hardware_(fr)|Hardware]] / Replace LEDs'''
5: ...a_Hardware_Replace_LEDs_(de)|deutsch]] [[LaFonera_Hardware_Replace_LEDs_(fr)|français]]
27: [[image:LaFonera_Hardware_Replace_LEDs_-_08_preparation.jpg]]
29: [[media:LaFonera_Hardware_Replace_LEDs_-_highres_08_preparation.jpg|Version... - LaFonera Hardware Power from USB (8,045 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Power from USB'''
6: The LaFonera is a nice piece of hardware, but it is somewhat limited by its power supply w...
8: As we know from looking at the hardware specifications for the LaFonera, it takes DC powe... - LaFonera Hardware New Paint Job (1,237 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / New Paint Job''' - LaFonera Hardware IO (en) (4,576 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / IO'''
13: ...: http://wiki.openwrt.org/OpenWrtDocs/Customizing/Hardware/JTAG_Cable and here: http://tech.am/2006/10/06/au...
39: ...: http://wiki.openwrt.org/OpenWrtDocs/Customizing/Hardware/JTAG_Cable
48: ...rom http://www.dd-wrt.com/wiki/index.php/LaFonera_Hardware_Serial-Cable-Port) - Linksys WRT300N v1, v1.1 (6,576 bytes)
7: * Hardware Defaults (with Linksys firmware)
17: ==Hardware Information== - LaFonera Hardware Modding (636 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Modding'''
7: [[Image:LaFonera_Hardware_Modding_-_01_front.jpg]]
9: [[Image:LaFonera_Hardware_Modding_-_02_side.jpg]]
11: [[Image:LaFonera_Hardware_Modding_-_03_ahead.jpg]] - SD/MMC mod (263 bytes)
6: [[Category:Hardware]] - Linksys WRT54G2 v1.0 (18,520 bytes)
5: ==Hardware== - 安装 (16,952 bytes)
13: ...specific]] page to '''accurately''' identify your hardware and not create a problem that renders your router...
15: ...gotten some background on the peacock page, the [[Hardware-specific]] page may be the most useful page for y...
18: * Use the '''brand-specific information in the [[Hardware-specific]]''' page to accurately identify which m...
19: ... and find the files you need. Again, check the [[Hardware-specific]] page for links to detailed instruction...
23: ...8 for instance). Use the "_mini" firmware if your hardware has 4 MB or more of flash (WRT54GL for instance).... - 硬件专用信息 (4,351 bytes)
1: {{Languages|Hardware-specific}}
4: Please also see in [[:Category:Networking hardware tutorials]]
6: ...of the [[Installation#Hardware-Specific|Main Page Hardware-specific]] explanations. This has been condensed...
8: =Hardware Brand=
44: *[[Linksys Serial numbers|Identifying Hardware Versions]] - LED Scripts (37,693 bytes)
1149: ===Broadcom based Hardware===
1297: ===Atheros based Hardware=== - Прошивка WL-500W (10,168 bytes)
160: [[Category:Networking hardware tutorials/ru]] - Прошивка WL-500W с подробными скрин-шотами (10,274 bytes)
171: [[Category:Networking hardware tutorials/ru]] - Linksys E2100L (2,608 bytes)
1: ===Hardware Information=== - Linksys E800 (3,220 bytes)
1: =[https://wikidevi.wi-cat.ru/Linksys_E800 Hardware Information]= - Main Page (1,889 bytes)
27: |{{Click || image=development.jpg | link=Hardware_DIY| width=48px | height=48px }}
28: |'''[[Hardware DIY]]''' <br/> Hardware tutorials, JTAG, serial port, how to open, ... - LaFonera Hardware Controlling AC-Loads via webinterface (4,497 bytes)
1: [[Category:LaFonera_Hardware_(en)]]
2: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Controlling AC-loads via web-interface'''
31: : [[Image:LaFonera_Hardware_Controlling_AC-Loads_via_webinterface_-_04_overvi...
40: : [[Image:LaFonera_Hardware_Controlling_AC-Loads_via_webinterface_-_05_web-in...
46: : [[Image:LaFonera_Hardware_Controlling_AC-Loads_via_webinterface_-_06_web-in... - Installation/fr (33,890 bytes)
14: ...ions spécifiques le concernant sur la page '''[[Hardware-specific/fr|Spécificités matérielles]]'''. N...
19: ...ock '' et l'information disponible dans la page [[Hardware-specific| Spécificités matérielles]] pour iden...
21: ... que le ''fil de discussion Peacock'' , la page [[Hardware-specific|Spécificités matérielles]] sera peut-...
24: ...tions spécifiques à votre marque dans la page [[Hardware-specific|Spécificités matérielles]]''' pour id...
25: ...besoin. Une fois encore, vérifiez sur la page [[Hardware-specific|Spécificités matérielles]] qu'il n'ex... - Fr:materiel (2,134 bytes)
1: ==Modifications Hardware== - Optware, the Right Way (36,809 bytes)
74: ...P software clients (like kphone, linphone) or SIP hardware clients (Voice over IP phones which are SIP-compa...
106: ....php?p=682151] The WL-520GU does not have enough hardware to support a typical OTRW install.
351: ...h Windows Vista and 7, and you have the necessary hardware resources, [[Samba3]] is a good tutorial to follo...
364: *'''Backup/Restore on Different Hardware'''- This allows you to backup your settings on o...
666: Jan 1 00:00:06 Asus user.notice kernel: '''Linux'''... - LaFonera Hardware SD-Card/Reader Position (6,152 bytes)
1: ...ry:LaFonera_Hardware_(en)|Hardware]] / [[LaFonera Hardware SD-Card|SD-Card]] / Reader Position'''
10: ...ad both) card reader to take apart, or [[LaFonera_Hardware_SD-Card#Cheap_SD_Card_.22reader.22_.28floppy_cabl...
60: ...you can follow the instructions on the [[LaFonera_Hardware_SD-Card]] page to wire up your reader to the Fone... - WHR-HP-AG108 (13,246 bytes)
10: ==Hardware==
20: - FFC ID: [https://fjallfoss.fcc.gov/oetcf/eas/reports/ViewExhibitReport...
23: ...dware at 12 dBm. You may want check out [https://fjallfoss.fcc.gov/prod/oet/forms/blobs/retrieve.cgi?a...
303: ==Hardware modifications== - USB (11,810 bytes)
21: Note: If the router hardware has a USB port, dd-wrt probably supports it. It m...
25: ...ng on capability, but the ability to add external hardware easily makes these far more powerful units.
37: ...imedia data from one format to another. USB audio hardware is becoming more commonplace due to its use with ...
75: cyberjack.o (REINER SCT cyberJack pinpad/e-com chipcard reader) - Linksys WRT55AG v2.0 (614 bytes)
3: ...the forum. Specs I gathered are in the 'supported hardware' matrix unless whoever redid that on 13 MAY 2010 ... - Linksys E1550 (3,454 bytes)
5: =Hardware Information= - Linksys E1500 (7,663 bytes)
3: =Hardware [https://wikidevi.com/wiki/Linksys_E1500 Informat... - Linksys E900 (3,213 bytes)
1: =[https://wikidevi.wi-cat.ru/Linksys_E900 Hardware Information]= - Broadcom detection (3,378 bytes)
9: ...to start" & "Compatibility" work for every device/hardware, except the cfe and nvram grabbing stuff.
26: ...the FCC-ID printed on a label? check on [https://fjallfoss.fcc.gov/oetcf/eas/reports/GenericSearch.cfm...
105: [[Category:Networking hardware]] - LaFonera Hardware LCD Screen (3,119 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / LCD Screen'''
9: [[Image:LaFonera_Hardware_LCD_Screen_-_01_fonera_LCD.jpg]]
25: [[Image:LaFonera_Hardware_LCD_Screen_-_02_wan_LED.jpg]]
27: [[Image:LaFonera_Hardware_LCD_Screen_-_03_schematic.gif]] - LaFonera Hardware IR Receiver (4,545 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / IR Receiver'''
13: [[Image:LaFonera_Hardware_IR_Receiver_-_01_pcb.jpg]]
16: Hardware part is very simple. You need an AVR Attiny2313 f...
33: ...then configure <span style="color:red;">/etc/lirc/hardware.conf</span> : - LaFonera Hardware LaFoneraPlus (12,883 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / LaFoneraPlus'''
10: [[image:LaFonera_Hardware_LaFoneraPlus_-_01_case.jpg]]
15: [[image:LaFonera_Hardware_LaFoneraPlus_-_02_atheros_chip.jpg]]
17: On the hardware side we see lot of well know things : same CPU At... - WRT54GL MAX232 Serial (6,868 bytes)
3: ...licable to several other models based on the same hardware (WRT54G line et all). The MAX232 is a level conve... - PC-Engines (12,674 bytes)
228: ...8400,8N1 eingestellt. Stellen Sie ein eventuelles Hardware Handshake aus, als Terminalemulation benutzen Sie...
261: [[Category:Networking hardware]] - Hashes (98 bytes)
3: <noinclude>[[Category:Flashing networking hardware]]</noinclude> - Ddadder (757 bytes)
9: ==Supported Hardware== - TFTP flash (16,402 bytes)
90: ...he tftp boot working (Siemens, Belkin and similar hardware).<br>
96: * always do a hardware factory reset after the successful flashing!
107: # Set your computer hardware adapter to a static IP address within the same su...
244: [[Category:Flashing networking hardware]] - Italian (1,683 bytes)
27: |{{Click || image=development.jpg | link=Hardware_DIY| width=48px | height=48px }}
28: |'''[[Hardware DIY]]''' <br/> Hardware tutorials, JTAG, serial port, how to open, ... - Changelog (7,371 bytes)
110: ...Motorola WR850G/GP, Linksys WRT54G/GS/GL (several hardware versions), Ravo W54-RT, Siemens SE505
123: ...), Motorola WR850G, Linksys WRT54G/GS/GL (several hardware versions), Siemens SE505 - Gateworks Avila GW234x (30,744 bytes)
90: ...COM with the default values: 115200,8,N,1 without hardware/software flow control.
395: Link-level hardware compression more efficiently utilizes the wireles...
459: ...s that these frequencies are available, there are hardware limitations (frequency filters) that may or may n...
563: [[Category:Networking hardware tutorials]] - Linksys WRT1900AC (7,260 bytes)
79: =Hardware= - Repeating Mode Comparisons (6,438 bytes)
18: ...with wrt150n1.1 AP + wrt54g6 R] (TODO: test other hardware). R/RB support all encryption algorithms. - Linksys (267 bytes)
1: ...Category:Networking hardware tutorials|Networking hardware tutorials]] pages for further info. - Watchguard Firebox II (9,880 bytes)
6: ...ebox III and Firebox x700 as well, due to similar hardware designs. In this guide, I assume that you have so...
35: The Ethernet jacks on the Firebox II ''do NOT support automatic [...
90: ... plug in your internet connection to the Ethernet jack labeled “External”, wait a few seconds, and...
130: [[Category:Networking hardware tutorials]] - Netgear R6400v1 (2,598 bytes)
5: ==Hardware [http://techinfodepot.shoutwiki.com/wiki/Netgear_...
6: The hardware is almost identical to a Netgear R6300v2, but has... - Netgear R7000P (2,672 bytes)
1: ==Hardware [http://techinfodepot.shoutwiki.com/wiki/Netgear_... - Asus RT-AC56U (3,895 bytes)
1: =[https://wikidevi.com/wiki/ASUS_RT-AC56U Hardware] Specifications= - Repeater Bridge/fr (12,531 bytes)
92: ...ost wireless router is directly cabled to the ISP hardware router which does have the firewall enabled. - Repeteur sans fil (12,493 bytes)
89: ...ost wireless router is directly cabled to the ISP hardware router which does have the firewall enabled. - Linksys WRT600N (4,396 bytes)
3: ====Hardware Specs==== - Asus WL-520GU (18,825 bytes)
117: = Hardware Notes =
118: ...vations made about working with the ASUS WL-520GU hardware. Certain behaviors of this device are different ... - Linksys WAP54G (10,094 bytes)
1: [[Linksys WAP54G Hardware Spec]] - LaFoneraPlus Software Flashing (10,090 bytes)
17: ...dd-wrt I throw at it. I don't know if it's due to hardware or that it's less supported than my fon2100a/b/c ... - X86 (8,329 bytes)
63: brw------- 1 root root 3, 0 Jan 1 1970 /dev/discs/disc0/disc
64: brw------- 1 root root 3, 1 Jan 1 1970 /dev/discs/disc0/part1
136: brw------- 1 root root 22, 0 Jan 1 1970 /dev/discs/disc1/disc
137: brw------- 1 root root 22, 1 Jan 1 1970 /dev/discs/disc1/part1
138: brw------- 1 root root 22, 2 Jan 1 1970 /dev/discs/disc1/part2 - Netgear WGR614 v8.0 & WGR614L (7,509 bytes)
5: The basic hardware for the WGR614 V8 and WGR614L is identical and fo...
35: Most of the Broadcom hardware uses a TRX style firmware. Netgear's WGR614L Linu... - Linksys WRT54GL (7,215 bytes)
6: =Hardware [https://wikidevi.com/wiki/Linksys_WRT54GL_v1.1 S...
70: ... in the name is required, which has a header with hardware info. - Switch (3,590 bytes)
53: ...the TX power to 5mW or so. It may help keep your hardware temps cooler. - Netgear WAG 102 (7,486 bytes)
6: ==Hardware==
237: ...e >[http://www.dd-wrt.com/wiki/index.php/LaFonera_Hardware_Serial-Cable-Port Fonera Serial Cable]<BR> - Antenna mods (254 bytes)
5: [[Category:Hardware]] - Accton Software Flashing (14,547 bytes)
6: ==Hardware==
73: ...ect using a serial connection.''' see [[LaFonera Hardware Serial-Cable-Port]]
273: .../wiki.openwrt.org/OpenWrtDocs/Hardware/Fon/Fonera Hardware layout] of the Accton router.
290: [[Category:Networking hardware tutorials]] - SENAO EOC-2610 (2,810 bytes)
11: =Hardware=
13: *Ubiquity Nanostation2 clone with better hardware.
32: ... not. If you can set it to secondary and push the hardware switch to ext. Now the rp-sma plug is active
80: [[Category:Networking hardware tutorials]] - Bonding (4,814 bytes)
69: ... the bond such that different peers use different hardware addresses for the server. - Buffalo N450 (831 bytes)
1: == Hardware Information == - Linksys WRT350N (2,519 bytes)
3: ===Hardware=== - Advanced wireless settings/ja (51,292 bytes)
570: ...y and you would only enable Afterburner when your hardware supports afterburner and your enviroment meets th...
578: ... available on all DD-WRT enabled G routers. It is hardware independent. Afterburner will only improve speeds...
675: [[Category:Wlan/ja]]
676: [[Category:Advanced tutorials/ja]]
677: [[Category:Settings/ja]] - Upgrade from openwrt (743 bytes)
23: [[Category:Flashing networking hardware]] - Triggertftp (1,465 bytes)
49: [[Category:Flashing networking hardware]] - Actiontec MI424WR (12,063 bytes)
83: ...e next several parameters until asked of "Network hardware addres [MAC] for npe_eth0"
84: ## For "Network hardware address [MAC] for npe_eth0:" enter the WAN port M...
85: ## For "Network hardware address [MAC] for npe_eth1:" enter the LAN port M...
131: Network hardware address [MAC] for npe_eth0: 0x00:0x01:0x02:0x03:0...
132: Network hardware address [MAC] for npe_eth1: 0x00:0x01:0x02:0x03:0... - 其它 (969 bytes)
9: There are some pages that describe specific hardware with only loose
20: * [[Hardware#NVRAM|NVRAM]]
22: * [[Hardware#Overclocking|路由器超频]]
24: * [[Hardware#Hardware_Modifications|硬件改造]]
30: *[[Linksys WAP54G Hardware Spec|思科 Linksys WAP54G 硬件规格]] - D-Link DIR-300 rev A (6,603 bytes)
167: =Hardware= - PXE (2,146 bytes)
2: ...ww.igel.com/ IGEL], [http://www.wyse.com/products/hardware/thinclients/ WYSE] , [DisklessWorkstations.com], ...
4: ... They provide significant power savings, extended hardware replacement intervals, and centralized management... - Linksys RV042 (2,356 bytes)
7: =Hardware=
23: Hardware : Intel IXP425 IXDP425<br> - Configure Samba in Linux (2,749 bytes)
108: [[Category:Flashing networking hardware]] - Overclocking (1,155 bytes)
40: [[Category:Networking hardware]] - Antenna adjusting (1,007 bytes)
14: [[Category: Hardware]]
33: [[Category:Hardware]] - Mobile Broadband (144,496 bytes)
8882: | Japan
19414: [[Category:Networking hardware tutorials]] - Asus TFTP Flash (17,505 bytes)
53: ...d-wrt.com/dd-wrtv3/dd-wrt/hardware.html Supported Hardware] - type ''wl5'' to get the list)
54: ...d-wrt.com/dd-wrtv3/dd-wrt/hardware.html Supported Hardware] - type ''wl5'' to get the list)
63: ...d-wrt.com/dd-wrtv3/dd-wrt/hardware.html Supported Hardware] list.
129: ...nd the [http://oldwiki.openwrt.org/OpenWrtDocs(2f)Hardware(2f)Asus(2f)WL500GRecovery.html detailed page abou...
230: ...untu 8.04 (Hardy) or a later version (Intrepid or Jaunty). - Verizon FIOS setup Walkaround (1,566 bytes)
21: [[Category:Networking hardware]] - Verizon FIOS setup Walkaround with Coax cable (MoCA) (2,096 bytes)
29: [[Category:Networking hardware]] - Linksys WRV54G (9,537 bytes)
42: Network hardware address [MAC] for npe_eth0: 0x00:0x0C:0x41:0xD6:0...
43: Network hardware address [MAC] for npe_eth1: 0x00:0x0C:0x41:0xD6:0...
208: http://nuwiki.openwrt.org/oldwiki/openwrtdocs/hardware/linksys/wrv54g<br> - Asterisk (2,095 bytes)
1: ... telephony equipment using relatively inexpensive hardware. - Power Supply Info (2,285 bytes)
54: --[[User:Dejagerd|Dejagerd]] 03:26, 19 February 2010 (CET)
57: [[Category:Hardware]] - Corerev List (3,597 bytes)
242: [[Category:Networking hardware]] - StarOS (2,648 bytes)
87: [[Category:Networking hardware tutorials]] - Insufficient ram (4,134 bytes)
50: [[Category:Networking hardware]] - D-Link DIR-320 64 Mb RAM Upgrade (1,761 bytes)
3: ...ou brick your router. If you don't have skills on hardware modding and SMD rework I don't recomend to perfor... - NEWD2 Support on some models (2,697 bytes)
84: [[Category:Networking hardware]] - Useful tools for the WiFi Network (11,758 bytes)
75: ...ious network services, servers, and other network hardware.
77: ...y of real-time notification mechanisms, including Jabber. - D-Link DIR-330 (24,059 bytes)
6: ==[https://wikidevi.wi-cat.ru/D-Link_DIR-330 Hardware] Specifications==
58: [http://nuwiki.openwrt.org/oldwiki/openwrtdocs/hardware/d_link/dir_330 Click here]
64: == Pictures of Hardware ==
65: Picture of the PCB hardware release A1 - here with JTAG Pin identification:<b...
125: # Do a hardware (push the button) reset to return to defaults. Re... - Linking Subnets with Static Routes (4,896 bytes)
8: ...ort is unbridged while the LAN switch (which is a hardware bridge) and wireless interfaces are software brid...
13: ...g interface which is poor design but can overcome hardware limitations such as switches without vlans. - Linksys WRT54G v1.0 & 1.1 (6,312 bytes)
9: ...fully, as not all firmware versions work with all hardware versions.
14: # all set [Comment from jas3 on 16-Mar-2008: The above worked for me. I the...
28: [dgb: 2009.04.25 V1.0 hardware with 1.02.1 firmware]
35: ...re developer who wasn't even in college when v1.0 hardware was available coded in an assert that the .bin fi... - Linksys WRT54G-RG (2,910 bytes)
1: ...WRT54G-TM and WRT54G-RG are identical in terms of hardware, but not firmware. You MUST USE THE CORRECT firm... - Xbee (4,930 bytes)
63: Could somebody move this page to the hardware diy or point me in the direction so I can move it...
66: [[Category: Hardware]] - D-Link DIR-600vB / 300vB (9,032 bytes)
6: ...[https://wikidevi.wi-cat.ru/D-Link_DIR-300_rev_B1 Hardware] Specifications==
31: ...IR-300 Rev A1 and Rev B1 are completely different hardware, different SoC, different procedure. So, if you h...
33: ...self. This means it's quick and easy to check the hardware revision before buying or borrowing it.
37: ==Pros of this hardware==
41: * Easy to install DD-WRT on this hardware (just flash through the web interface as per belo... - Micro Redboot (3,960 bytes)
15: =Supported hardware= - Linksys WRT54G2 v1.3 & WRT54GS2 v1.0 (5,285 bytes)
7: ==Hardware== - Wireless-N Configuration (13,269 bytes)
3: ...ally affect performance and there still isn't any hardware commonly available capable of supporting the maxi...
14: ... it requires one main 20MHz channel plus a free adjacent channel at ±20MHz. The main channel is used...
31: ...Wifi channels but channel 14 is only available in Japan for B spec, so you can pretty much forget abou... - Belkin F5D8235-4 v2000 (9,430 bytes)
2: I have the F5D8235-4 Version: v2000 hardware. This is marketed as the "Belkin N+ Router" and ...
46: hardware watchpoint : yes - Asus RT-N16 (18,355 bytes)
1: =Hardware=
7: ==[https://wikidevi.com/wiki/ASUS_RT-N16 Hardware] Specifications==
86: #:''Note on Asus hardware reset'' for NVRAM clear: do not use the Reset but...
158: * Hardware fix (capacitor) for RT-N16 wireless drop-outs [ht...
222: ...builder.com/lanwan/lanwan-howto/31103-how-we-test-hardware-routers-revision-3] - VLAN Detached Networks - Linksys E2500 (3,616 bytes)
4: <tr><th>DD-WRT Port</th><th>Hardware/GUI Port</th></tr> - Multiple WLANs (14,425 bytes)
19: ==Atheros Based Hardware==
22: ==Broadcom Based Hardware (Very old)==
35: ==Ralink Based Hardware==
78: ... below, but the following bug still exists in old hardware, eg wrt54gl with as of svn r30826) Would your net... - Linksys WRT320N v1.0 (5,706 bytes)
5: ===[https://wikidevi.com/wiki/Linksys_WRT320N_v1 Hardware] Specs=== - OM1P config (1,528 bytes)
5: The OM1P has a hardware watchdog that will reset the device every 5 minut...
49: # send heartbeat to the hardware watchdog - Asus RT-N12 (12,946 bytes)
16: =Hardware Specifications=
42: ... the initial firmware for a different revision of hardware''' or it may enter an infinite reboot loop. Reco...
68: #Download the appropriate firmware for your hardware revision
156: ...* These have the same specs as the B1, C1, and D1 hardware. References:<br>[https://forum.dd-wrt.com/phpBB2...
165: ...that version 36330 mini has been tested on the A1 hardware version see [https://download1.dd-wrt.com/dd-wrtv... - Hardware-specific (5,910 bytes)
1: {{Languages|Hardware-specific}}
3: ...formation. Please also see [[:Category:Networking hardware tutorials]] and [[Supported_Devices]] for links t...
7: =Hardware Brand=
49: *[[Linksys Serial numbers|Identifying Hardware Versions]]
196: [[Category:Networking hardware tutorials]] - Linksys WTR54GS (572 bytes)
5: ==Hardware v1==
13: ==Hardware v2== - Asus (230 bytes)
1: ...Category:Networking hardware tutorials|Networking hardware tutorials]] pages for further info. - MyPage (36,169 bytes)
37: ...p the variable using nvram. (See [[Hardware#NVRAM|Hardware]])
121: '''drw-r--r-- 2 root root 0 Jan 14 21:49 backup <-- NVRAM text backup...
122: '''drw-r--r-- 2 root root 0 Jan 14 21:49 images <-- images are stored...
123: '''drw-r--r-- 2 root root 0 Jan 14 21:49 js <-- translation f...
124: '''drw-r--r-- 2 root root 0 Jan 14 21:49 libs <-- web script lib... - Linksys WRT610N v2.0 (9,448 bytes)
11: '''The device hardware is identical to a [[Linksys_E3000]].'''<br>
17: ...ages point to the E3000 pages, because again, the hardware is the same in the later model E3000 as the WRT61...
91: ...t=137565 DD-WRT Forum Index -> Broadcom SoC based Hardware -> Change your 610n V2 into an E3000 - Amended] '... - Netgear (236 bytes)
1: ...Category:Networking hardware tutorials|Networking hardware tutorials]] pages for further info. - Ubiquiti Litestation 2 (LS2/LS5/PS2/PS5/NS2/NS5/LSX) (1,705 bytes)
34: [[Category:Networking hardware tutorials]]
35: [[Category:Hardware]] - Netgear WNDR3300 (18,349 bytes)
3: == Hardware [https://wikidevi.com/wiki/Netgear_WNDR3300v1 Spe...
36: * [https://wiki.openwrt.org/oldwiki/openwrtdocs/hardware/netgear/wndr3300 OpenWRT wiki]: detailed informat...
139: ...nce: [http://wiki.openwrt.org/oldwiki/openwrtdocs/hardware/netgear/wndr3300 OpenWRT WNDR3300 wiki]
223: #Back up your settings using the hardware independent backup script (search the wiki and fo... - Ubiquiti (818 bytes)
8: [[Category:Networking hardware tutorials]]
9: [[Category:Hardware]] - ASUS RT-G32 (9,327 bytes)
4: Hardware: ASUS RT-G32 (this is not the Rev B version!) - Overclocking BCM 47xx CPU's (7,179 bytes)
108: [[Category:Networking hardware]] - Configuring for Xbox 360 (4,308 bytes)
72: [[Category:Networking hardware tutorials]] - Netgear R6400v2 (2,478 bytes)
5: ==Hardware [http://techinfodepot.shoutwiki.com/wiki/Netgear_...
60: '''Hardware reset button:''' - Netgear R6700v3 (5,388 bytes)
5: =Hardware Specs= - Netgear AC1450 (2,333 bytes)
3: ==Hardware Specs==
41: The OEM software-crippled Costco AC1450 hardware has the same FCC ID as the v2. Kong added support... - Buffalo WZR-HP-G300NH (14,503 bytes)
67: ...an use this to remedy the VLAN issue. Just plug a hardware switch into one of the g300nh's LAN ports and the...
82: ==DD-WRT on Buffalo WZR-HP-G300NH (Japanese version)==
84: ... and rejects western firmware. For people with a Japanese router, see the following two sites for det...
122: ...G300NH2 and WZR-300HP, these units have different hardware than the v1 of this unit. Both the G300NH2 and 30...
287: ...s XP OS. '''I also always use a 10/100 or Gigabit hardware switch in-between the router and the PC, this way... - Что такое DD-WRT? (41,715 bytes)
39: *[[Glossary#MMC/SD Card|MMC/SD Card Support]] (hardware modification required) - OpenVPN Router to Router Bridged Configuration Alternative (Hardware VPN) (5,716 bytes)
1: ...uter to Router Bridged Configuration Alternative (Hardware VPN) ===
2: (for hardware "like" vpn access for multiple computers or appli...
6: This will allow for hardware like VPN access on the client side to more than o...
98: --[[User:S19303cc|S19303cc]] 20:29, 16 January 2011 (CET) - Asus WL-500g Premium V2 (13,166 bytes)
29: ==Hardware==
44: hardware watchpoint : no
View (previous 250) (next 250) (20 | 50 | 100 | 250 | 500).