Search results

From DD-WRT Wiki

You searched for Hardware/de

Jump to: navigation, search

For more information about searching DD-WRT Wiki, see Help.

Showing below up to 250 results starting with #1.


View (previous 250) (next 250) (20 | 50 | 100 | 250 | 500).

Article title matches

  1. Hardware (18,720 bytes)
    1: {{Languages|Hardware}}
    5: ...here the permanent settings are stored. This includes
    23: ...de> or <code>443 8080</code> or <code>sometext</code>).
    24: ... after reboot unless you do <code>nvram commit</code>.
    26: ... when you made a typo in <code><variable_name></code> above:
  2. LaFonera Hardware serial to ethernet (1,034 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / serial to ethernet'''
    8: ...he software to open a serial port console is included in the Fon's software packages.
    10: ...o you can use one or more <nowiki>:</nowiki> to indent your comment.
  3. LaFonera Hardware i2c (6,202 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / i2c'''
    10: [[Image:LaFonera_Hardware_i2c_-_01_overview.jpg]]
    14: ...i2c/i2c_gpio.pdf here (PDF)] [http://www.wildblue.de/fonera/i2c/i2c_gpio.pdf (mirror)].
    16: On the software side, my module is based on i2c-parport-light. Linux i...
  4. LaFonera Hardware Coloured Chassis (2,817 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Coloured Chassis'''
    13: When your device is dried, maybe it looks like this one
    15: [[image:LaFonera_Hardware_coloured_chassis.jpg]]
    22: ...eflecting from it (monitor & a mouse) to give an idea of the finish.
  5. LaFonera Hardware SD-Card (6,579 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / SD-Card'''
    16: A kernel module is required in order to use the MMC hack.
    20: ...el 2.6 is avaible. It uses gpio bitbanging, the code is currently being reworked a bit to make it look...
    24: * dev nodes do not get allocated automatically yet
  6. LaFonera Hardware Power-Sources (2,124 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Power-Sources'''
    6: When connected directly to a Li-ion battery, the device draws around 550ma with wireless on and 450ma...
    9: ...a stepup circuit. (or power LaFonera from the inside without the 3,3V regulator)
    11: ...ing in flames (literally) when shorted, over or under-charged. It is also better to get a proper LiIon...
  7. Linksys WAP54G Hardware Spec (3,039 bytes)
    3: Model No: WAP54G<br>
    5: Hardware spec:<br>
    12: [[Image:inside_wap54g.jpg]]<br>
    13: ''Inside Wap54g''<br>
    20: ... was able to add his support for SD - I'll try to describe it here:
  8. LaFonera Info Hardware-Specifications (3,830 bytes)
    3: ...Fonera_(en)|LaFonera]] / [[LaFonera_Info|Info]] / Hardware-Specifications'''
    5: == The Hardware Specifications ==
    6: === Model 2100 ===
    13: * Antenna Omni-Directional detachable antenna (2dBi)
    19: === Model 2200 ===
  9. LaFonera Hardware Second-Antenna (7,482 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Second-Antenna'''
    19: ...red. That allows me to leave the 2 antennas at 90degrees of one another without rubbing at the base.
    20: [[Image:FON_dremel_outside.jpg|thumb|none|Image of the hole that I dremeled....
    23: =Soldering=
  10. LaFonera Hardware JTAG (268 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    4: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / JTAG'''
    7: For now take a look at [[LaFonera_Hardware_IO_(en)]]
  11. LaFonera Hardware USB (9,766 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / USB'''
    7: ...ect it directly to a PC USB port. This mod just added a usb connector, but not a USB CONNECTION!!!
    11: ...on than fixing a large, ugly serial port to the side of the LaFonera. '''Note - This is just a method ...
    13: ... LaFonera, so read this article first: [[LaFonera_Hardware_Serial-Cable-Port]].
  12. LaFonera Hardware Power-over-Ethernet (3,201 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Power-over-Ethernet'''
    8: ...nsive, several 10´s of euros each, but might be ideal in this case.
    12: ... I think, identical to an SMC unit we use (looks identical when opened up, same circuit and component ...
    21: ...s)'' Alternatively you should build a switching-mode step-down DC converter, [http://www.hobbielektron...
  13. LaFonera Hardware Serial-Cable-Port (6,917 bytes)
    1: [[Category:LaFonera_Hardware_(en)]]
    2: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Serial-Cable-Port'''
    6: {| border=0 cellspacing=0 cellpadding=5
    7: | [[Image:LaFonera_Hardware_Serial-Cable-Port_01.jpg]]
    17: See [[LaFonera_Hardware_Disassembling|LaFonera Hardware Disassembling]] for how to dissassemble your rout...
  14. LaFonera Hardware Disassembling (1,764 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Disassembling'''
    5: == Inside the fon router==
    7: {| border=0 cellspacing=0 cellpadding=5
    8: | [[Image:LaFonera Hardware Disassembling 01.png]]
  15. LaFonera Hardware (49 bytes)
    1: #REDIRECT [[:Category:LaFonera_Hardware_(en)]]'''
  16. Hardware DIY (1,115 bytes)
    1: {{Languages|Hardware_DIY}}
    3: ==Hardware List==
    5: ...cated on their router's particular wiki page. A wider range of mods can be found on the OpenWRT wiki p...
    7: ...es are listed here: [[Supported_Devices|Supported Devices]]<br>
    8: ...: [[Known_incompatible_devices|Known Incompatible Devices]]
  17. LaFonera Hardware Cooling-System (11,159 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Cooling-System'''
    13: ...ue I'm not looking forward to my case melting and destroying itself.
    24: *Soldering Iron
    25: *Solder
  18. LaFonera Hardware Controlling AC-Loads (4,663 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Controlling AC-Loads'''
    15: == Hardware ==
    18: [[image:LaFonera_Hardware_Controlling_AC-Loads_-_01_ready_to_start.jpg]]
    20: [[media:LaFonera_Hardware_Controlling_AC-Loads_-_highres_01_ready_to_start....
  19. LaFonera Hardware Roboter Controlling (2,339 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Roboter Controlling'''
    15: == Hardware ==
    18: [[image:LaFonera_Hardware_Roboter_Controlling_-_03_complete_robot_front.jpg...
    20: [[media:LaFonera_Hardware_Roboter_Controlling_-_highres_03_complete_robot_f...
  20. LaFonera Hardware Logo-Removal (2,569 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Logo-Removal'''
    5: ...a_Hardware_Logo-Removal_(de)|deutsch]] [[LaFonera_Hardware_Logo-Removal_(fr)|français]]
    9: Metal polish is powerful enough to abrade metal, which means that the solvent is also stron...
    13: === Things needed ===
  21. LaFonera Hardware Replace LEDs (6,702 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Replace LEDs'''
    5: ...a_Hardware_Replace_LEDs_(de)|deutsch]] [[LaFonera_Hardware_Replace_LEDs_(fr)|français]]
    11: I decided to change the colour of the LaFonera Status LEDs...
    13: ...ple to do this modification - if you have some soldering skills.
  22. LaFonera Hardware Logo-Removal (de) (2,955 bytes)
    2: [[Category:LaFonera_Hardware_(de)]]
    3: ...Fonera_(de)|LaFonera]] / [[LaFonera_Hardware_(de)|Hardware]] / Logo-Entfernung'''
    5: ...a_Hardware_Logo-Removal_(de)|deutsch]] [[LaFonera_Hardware_Logo-Removal_(fr)|français]]
    7: == Entfernung des Logos mit Metallpolitur ==
    9: ... auch das es genügend Kraft besitzt um die Farbe des fon.com Logos zu entfernen.
  23. LaFonera Hardware Logo-Removal (fr) (2,529 bytes)
    2: [[Category:LaFonera_Hardware_(fr)]]
    3: ...Fonera_(fr)|LaFonera]] / [[LaFonera_Hardware_(fr)|Hardware]] / Logo-Removal'''
    5: ...a_Hardware_Logo-Removal_(de)|deutsch]] [[LaFonera_Hardware_Logo-Removal_(fr)|français]]
    9: ...t of the FON logo on La Fonera. [http://only-suicide-girls.ru]
    13: === Things needed ===
  24. LaFonera Hardware (de) (46 bytes)
    1: #REDIRECT [[:Category:LaFonera_Hardware_(de)]]
  25. LaFonera Hardware (fr) (49 bytes)
    1: #REDIRECT [[:Category:LaFonera_Hardware_(fr)]]'''
  26. LaFonera Hardware 32MB SDRAM MOD (5,063 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / 32MB SDRAM MOD'''
    11: ...LE sided ram. Since single sided ram chips are harder to find, I choose to go with SO-DIMM for noteboo...
    21: ...y not for those that have not done any kind of soldering before. With that out of the way, we an proce...
    23: ... If done properly, there won't be enough solder under the pads to keep the chip on when a little bit o...
  27. LaFonera Hardware Replace LEDs (de) (6,319 bytes)
    1: [[Category:LaFonera_Hardware_(de)]]
    2: ...Fonera_(de)|LaFonera]] / [[LaFonera_Hardware_(de)|Hardware]] / Replace LEDs'''
    4: ...a_Hardware_Replace_LEDs_(de)|deutsch]] [[LaFonera_Hardware_Replace_LEDs_(fr)|français]]
    6: = Austausch der grünen LEDs =
    7: ... Du wie Du die grünen LEDs Deiner LaFonera mit andersfarbigen austauschen kannst'''
  28. LaFonera Hardware Replace LEDs (fr) (5,848 bytes)
    2: [[Category:LaFonera_Hardware_(fr)]]
    3: ...Fonera_(fr)|LaFonera]] / [[LaFonera_Hardware_(fr)|Hardware]] / Replace LEDs'''
    5: ...a_Hardware_Replace_LEDs_(de)|deutsch]] [[LaFonera_Hardware_Replace_LEDs_(fr)|français]]
    8: ...comment remplacer les LEDs vertes de LaFonera par des bleues.'''
    10: ... dans mon environnement (mise à part mon amie) a des LEDs bleues: PC, enceintes, voitures...
  29. LaFonera Hardware Power from USB (8,045 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Power from USB'''
    6: ...ou, to use as a portable access point, or to provide wireless access for a laptop? I think so. :)
    8: ...for 2000 milliamps at 5v. USB ports can only provide 500 milliamps per port. If the load gets to high ...
    12: =Parts Needed=
  30. LaFonera Hardware New Paint Job (1,237 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / New Paint Job'''
    22: ==Parts Needed==
  31. LaFonera Hardware IO (en) (4,576 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / IO'''
    6: In order to create more mods, we need to know what we hav...
    8: In order to get this started, I am putting down what I ha...
    13: ...: http://wiki.openwrt.org/OpenWrtDocs/Customizing/Hardware/JTAG_Cable and here: http://tech.am/2006/10/06/au...
  32. LaFonera Hardware Modding (636 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Modding'''
    7: [[Image:LaFonera_Hardware_Modding_-_01_front.jpg]]
    9: [[Image:LaFonera_Hardware_Modding_-_02_side.jpg]]
    11: [[Image:LaFonera_Hardware_Modding_-_03_ahead.jpg]]
  33. Hardware-Specific/zh cn (32 bytes)
  34. Hardware-specific/zh cn (32 bytes)
  35. LaFonera hardware New Paint Job (45 bytes)
    1: #REDIRECT [[LaFonera Hardware New Paint Job]]
  36. LaFonera Hardware (en) (49 bytes)
    1: #REDIRECT [[:Category:LaFonera_Hardware_(en)]]'''
  37. LaFonera Hardware IO (39 bytes)
    1: #REDIRECT [[LaFonera Hardware IO (en)]]
  38. LaFonera Hardware Controlling AC-Loads via webinterface (4,497 bytes)
    1: [[Category:LaFonera_Hardware_(en)]]
    2: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Controlling AC-loads via web-interface'''
    7: '''You will destroy the original Web-interface with this startup...
    24: == Parts needed ==
    31: : [[Image:LaFonera_Hardware_Controlling_AC-Loads_via_webinterface_-_04_overvi...
  39. LaFonera Hardware SD-Card/Reader Position (6,152 bytes)
    1: ...re]] / [[LaFonera Hardware SD-Card|SD-Card]] / Reader Position'''
    3: ...ates a possible way of mounting an SD/MMC card reader onto the Fonera.
    5: ...r|658px|Fonera with a blue SD card in the card reader]]
    10: ...r [[LaFonera_Hardware_SD-Card#Cheap_SD_Card_.22reader.22_.28floppy_cable.29|make your own]]
    12: * Some thin solder for soldering
  40. LaFonera Hardware LCD Screen (3,119 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / LCD Screen'''
    9: [[Image:LaFonera_Hardware_LCD_Screen_-_01_fonera_LCD.jpg]]
    12: La Fonera is a really nice toy. I have already deacivated serial console because of playing with IR...
    14: ...der for storing images and animations. The uLCD model can only display simple stuff (line, cercle, tex...
  41. LaFonera Hardware IR Receiver (4,545 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / IR Receiver'''
    8: ...ite simple. All you need is a TSOP receiver, a diode, a resistor and a78L05 regulator as explained her...
    10: ... RX line. It can be used with USB/serial and embedded system with simple serial port like… La Fonera...
    13: [[Image:LaFonera_Hardware_IR_Receiver_-_01_pcb.jpg]]
  42. LaFonera Hardware LaFoneraPlus (12,883 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / LaFoneraPlus'''
    7: ...than the classical Fonera except that’s it include two ethernet interfaces. This can be very usefull...
    10: [[image:LaFonera_Hardware_LaFoneraPlus_-_01_case.jpg]]
    12: ...test it like a FonSpot, i want to take a look inside.
  43. Hardware-specific (5,910 bytes)
    1: {{Languages|Hardware-specific}}
    3: ...y:Networking hardware tutorials]] and [[Supported_Devices]] for links to other pages and information t...
    7: =Hardware Brand=
    9: ...shing]] Page. (Use only the MR3202A binaries provided, instead of the Fonera ones).
    19: * [[Asus WL-500g Deluxe|Asus WL-500G Deluxe]]
  44. OpenVPN Router to Router Bridged Configuration Alternative (Hardware VPN) (5,716 bytes)
    1: ...uter to Router Bridged Configuration Alternative (Hardware VPN) ===
    2: (for hardware "like" vpn access for multiple computers or appli...
    4: This is a quick and dirty guide to creating a VPN between (2) DD-WRT v24 SP2 rout...
    6: ...ccess on the client side to more than one client, device, and or appliance that does NOT have built in...
    8: '''Examples Include:'''
  45. Hardware DIY/ru (33 bytes)
  46. Hardware DIY/zh cn (541 bytes)
    1: {{Languages|Hardware_DIY}}
    8: ...tp://www.dd-wrt.com/wiki/index.php/DD-WRT_Doku_%28DE%29#WRT350N-Antennen_Mod WRT350N 天线改造]
    11: * [[:Category:LaFonera_Hardware_%28en%29|La Fonera的硬件摩丁部落]]
  47. Hardware/ru (2,765 bytes)
    1: {{Languages|Hardware}}
    51: [[Category:Hardware/ru| ]]
  48. Hardware-specific/fr (567 bytes)
    1: {{Languages|Hardware-specific}}
    4: ...omplète''' en anglais cliquez sur ce lien : '''[[Hardware-specific]]'''
    8: La seule page traitant des spécificités matérielles en français concern...
    12: Vous pouvez ajouter des pages relatives à d'autres matériels en fourni...

Page text matches

  1. DD-WRT Doku (DE) (83,042 bytes)
    1: ...http://www.dd-wrt.com/wiki/index.php/DD-WRT_Doku_(DE)%23WRT350N-Antennen_Mod&usg=ALkJrhg1ggC8OBFonl_XJ...
    8: ...lange nicht mehr aktualisiert. Viele Artikel behandeln DD-WRT Versionen die nicht mehr aktuell sind (D...
    10: ...y hat wahrscheinlich kein Interesse mehr an einer Deutschen-Wiki.
    19: ...ieses vom Mitmachen. Jeder darf, und soll [http://de.wikipedia.org/wiki/Artikel Artikel] verfassen, ed...
    23: [[Image:Wpa2.JPG|thumb|Das Interface der aktuellen DD-WRT v23/v24 Versionen]]
  2. Hinzufügen eines SD-Kartenlesers an den Linksys WRT54G (20,102 bytes)
    1: == Tutorial: Hinzufügen eines SD-Kartenlesers an den Linksys WRT54G ==
    3: ...hde und Mads Ulrik Kristoffersen - übersetzt ins Deutsche von gammelgemse''
    6: ...T kompiliert, wird es möglich sein, den Speicher der jeweiligen SD-Karte als lese- und schreibbare Pa...
    8: ===Bilder===
    10: ...lSolderingDone.jpg http://kiel.kool.dk/pics/AllSolderingDone.jpg] ) <br><br>
  3. Verizon FIOS setup with dd-wrt as primary router (5,626 bytes)
    5: In order to use your dd-wrt loaded router instead of the Verizon FIOS Supplied Acti...
    9: ...o the configuration due to the way the program guide and VoD is obtained over the Coax cable (MoCA con...
    11: 1 - Login to your AT router (default username/password = admin/password)
    15: 3 - Locate the column that has the header "Broadband Connection Ethernet"
    17: ... to release/renew your DHCP connection on their side….By cloning the MAC address….you can also swi...
  4. Hardware (18,720 bytes)
    1: {{Languages|Hardware}}
    5: ...here the permanent settings are stored. This includes
    23: ...de> or <code>443 8080</code> or <code>sometext</code>).
    24: ... after reboot unless you do <code>nvram commit</code>.
    26: ... when you made a typo in <code><variable_name></code> above:
  5. Hauptseite (3,948 bytes)
    3: |bgcolor="#ffffc0" style="color: black; border: 1px solid black"|
    11: ...rstellung eines Tutorials für '''DD-WRT''' verwendet.
    16: <div style="margin: 0; margin-right:10px; border: 1px solid #dfdfdf; padding: 0 1em 1em 1em; back...
    24: ...WRT_Doku_%28DE%29|> DD-WRT Dokumentation Project (DE)]]'''</font>
    25: ...tp://www.dd-wrt.com/wiki/index.php/DD-WRT_Doku_%28DE%29
  6. Recover from a bad flash (41,673 bytes)
    7: ...i>configure</i> your router in ways which make it dead to the world. These techniques may be useful i...
    9: To determine if the router is bricked, carefully follow...
    20: # All should be in default settings now.
    32: ...lay at the front of the router is the best way to determine what type of brick you have and its recove...
    36: ...lit up the other LED's, then a defective [[bootloader]] is present. However, if you can ping 192.168.1...
  7. Glossary (58,851 bytes)
    15: ...thenticator requests more information in order to determine the method. Rather than requiring the aut...
    19: ...rts transfers up to 11 megabits per second under ideal conditions. Transmission occurs over 20 MHz o...
    22: ...llowing it to reach 54 megabits per second under ideal conditions. It requires a radio capable of tra...
    25: ...(Wave II devices) bandwidth. This standard also added MU-MIMO support and 256-QAM modulation. This was...
    28: ....11g equipment can typically operate in 802.11b mode when required to work in 802.11b environments. L...
  8. WDS Linked router network (21,712 bytes)
    5: =Basic Definitions=
    14: '''WDS AP''' – the host router "Wireless Mode" selection, only on Qualcomm Atheros routers
    16: ...'WDS Station''' – the client router "Wireless Mode" selection only on Qualcomm Atheros routers
    18: ... required on Qualcomm Atheros routers (see more under Multiple WLANs)
    22: '''MAC address''' – device specific address, not easily changeable. Usua...
  9. Linksys EA6500 V1 (23,843 bytes)
    1: ...ys EA Series]][[Category:Linksys_guides]]</noinclude><center>
    2: ...70%;margin-top:+.7em;background-color: #F7F7F7;border-spacing: 0px;text-align:center;"
    6: ...="width:25em;color:#000;border: 2px solid red; border-left-width: 0px;"|
    7: ...2/viewforum.php?f=1 forum] before considering the details on this page to be accurate</font>
    12: ...7em;text-align:center;background-color:#F7F7F7;border-spacing: 0px"
  10. Kismet Server/Drone (18,210 bytes)
    1: ''For a Linux installation guide on Kismet see:'' [[wrt54g kismet with linux serve...
    4: ...wireless network detector, sniffer, and intrusion detection kit.
    8: ... You are then free to run a Kismet client on your desktop computer view the output.
    10: Anyone familiar with Network Stumbler will definitely appreciate running Kismet Server or Kisme...
    14: ...smet drone on your WRT and the Client/Server on a desktop computer(s) seems to be the most common inst...
  11. Chillispot (36,851 bytes)
    2: <!-- Note to ChilliSpot Service Providers: -->
    9: ...roller that provides a captive portal / walled-garden environment and uses RADIUS or a HTTP protocol f...
    12: ...g issues with ChilliSpot functionality throughout development history in DD-WRT. Firmware versions 44...
    14: ...x bug. If you need to use ChilliSpot and if your device support it you should try a firmware release ...
    22: * Provide a Wi-Fi usage agreement, advertising or other nei...
  12. Wl command (24,951 bytes)
    1: ...ou are here: '''[[Main_Page|Wiki mainpage]] / [[Index:Scripting|Scripting]] / [[Telnet/SSH_and_the_Com...
    3: ...e routers firmware to access and control wireless hardware. It can be accesed from a [[Telnet/SSH_and_the_Co...
    9: ...heros Hardware, this functionality is absent/less developed, and users will need to use the 'ifconfig'...
    16: ...ent Mode]] and others only in Access Point (AP) Mode.
    42: mark adapter down but do not reset hardware.
  13. Заводские установки (28,571 bytes)
    1: {{Languages|Factory Defaults}}
    7: ''Нужно объединить с [[Hardware#NVRAM]].
    16: ...как указано на [http://forum.bsr-clan.de/viewtopic.php?p=42267#42267 форуме].
    22: В разделе ''Administration → Factory Defaults''.
    62: wl_mac_deny=
  14. Ipkg (tutorial) (10,613 bytes)
    1: Brainslayer is working hard to merge the code base of DD-WRT with the OpenWRT firmware. This me...
    8: ...r Install, upgrade, or remove package from <dest_name>
    9: ...ame> is '''either''' a folder path '''or''' a pre-defined
    11: ... by default, ipkg on DD-WRT supports these pre-defined names:
    18: -force-depends Make dependency checks warnings instead of errors
  15. Index:Misc/ja (966 bytes)
    18: * [[Hardware#NVRAM|NVRAM]]
    20: * [[Hardware#Overclocking|Router Overclocking]]
    22: * [[Hardware#Hardware_Modifications|Hardware modifications]]
    28: * [[Linksys WAP54G Hardware Spec]]
    30: * [[ISP Upgrades v PPPoE]]
  16. Separate LAN and WLAN (outdated) (15,234 bytes)
    1: '''This guide is outdated, please see [[Separate LAN and WLAN]]...
    3: ... Linksys firmware, and all custom firmwares are a derivation of this, performing this setup will yield...
    9: = Hardware =
    12: By default, inside the switch exist 2 ''Virtual LANs'' (VLans), vlan...
    14: By default, inside the router there is a bridge (br0) bridging eth1 ...
  17. IPv6 (tutorial) (36,148 bytes)
    3: ...is a network layer IP standard used by electronic devices to exchange data across a packet-switched ne...
    5: ...://www.potaroo.net/tools/ipv4/ There are too many devices in the world for 32-bit (2<sup>32</sup>, or ...
    7: ...ncoming connections. ip6tables is NOT included by default with DD-WRT, which means your clients will b...
    11: * [[Supported Devices|DD-WRT compatible router]]
    14: ...) using [[What_is_DD-WRT%3F | a version that includes IPv6 support]].
  18. Miscellaneous (1,602 bytes)
    5: ...rms and DD-WRT features with definitions and considerable explanations. A great place for reference an...
    8: ==Device-Specific Information==
    9: There are some pages that describe specific hardware with only a loose
    12: ...wiki/index.php/Category:Linksys_guides Linksys guides]
    14: ...m/wiki/index.php/Category:Belkin_guides Belkin guides]
  19. Firewall (8,046 bytes)
    1: ...affic and/or log it. Most firewall are made for moderating ip traffic and are called '''ip firewalls''...
    3: ...(ACL) - e.g. named inside2outside and outside2inside.
    8: * destination ip address
    11: ** destination tcp/udp port
    14: ...nnection. A statefull firewall can additionally moderate trackable traffic by:
  20. Bootvorgang (68,911 bytes)
    5: ...weiß noch nicht! Vielleicht gibt es ja was zu entdecken.<br>
    6: Der WRT war original verpackt.<br>
    7: Es geht los, mit den allerersten Bootvorgang<br>
    16: Initializing Devices.
    29: Text (code) segment: 0x80300000 - 0x80338DB0 (232880)
  21. ¿Qué es DD-WRT? (4,318 bytes)
    2: ...PG|thumb|La actual [[Interfaz Web| interfaz web]] de DD-WRT]]
    3: ... soportados, por favor lee la página [[Supported Devices]], en inglés.
    5: ...T fue creado a partir de la decisión de Sveasoft de empezar a cobrar por su producto, cerrando la pue...
    7: ... siendo [http://forum.bsr-clan.de/ftopic4612.html desarrollado] por BrainSlayer para ganar su dinerill...
    9: ... tiempo de activación y otras cosas del software de Sveasoft.
  22. Kismet on Linux (4,875 bytes)
    9: On the Linux desktop machine at a console, type
    13: ...sword as the one for the wrt's web interface (the default is 'admin').
    17: cd into the directory where you downloaded it to and unzip it.
    21: ...local web-server running on my desktop box, I decided to use it and wget to copy the kismet files over...
    29: <nowiki>wget http://<ip address of desktop box>/kismet_drone</nowiki>
  23. Wrt54g kismet with linux server (9,309 bytes)
    10: ...ow to run the server and the client with cgywin under Windows.
    20: ...this means that you can edit the conf file on the desktop (using the editor of your choice) rather tha...
    24: On the Linux desktop machine at a console, type
    30: ...sword as the one for the wrt's web interface (the default is 'admin').
    34: cd into the directory where you downloaded it to and unzip it.
  24. Linksys WRT610N (11,615 bytes)
    2: ...he WRT610N was a top-of-the-line consumer Linksys device (replaced by the [[Linksys E3000|E3000]]) wit...
    10: ...or Broadcom devices. It's responsible for initial hardware configuration and subsequent booting of the (Linu...
    20: ... between 12387 and 12424 do not work on CFE .12 models. See [http://svn.dd-wrt.com/ticket/1149 ticket ...
    21: ...WRT will start, but immediately reboot, requiring debricking.
    23: ...NOTE:'' Eko builds have disappeared - use recommended build 14929 as a minimum.
  25. Feature requests (17,201 bytes)
    3: ...om/phpBB2/ forum] and post your request. The main developer (BrainSlayer) does read the forums and gen...
    5: ...ver. I'm not sure Brainslayer reads the English side of the Wiki...
    13: * Auto Upgrade Feature
    15: ...d specific documentation and how-to's should be added also.
    17: ... to enable / disable ports on any given supported device
  26. Wiederbeleben (2,917 bytes)
    7: ...Rettungsmethoden, die im Folgenden beschrieben werden.
    9: Ihr sollte auf jeden Fall die Standard-IP eures Routers kennen!
    15: ...igen Hardware-Revisionen ist der Port 1 am Switch der 4. Slot.
    18: Erst jetzt könnt ihr die nächsten Aufgaben anwenden.
    26: oder
  27. Wiki discussion (5,344 bytes)
    7: ...us page: [https://www.dd-wrt.com/wiki/index.php/Index:Misc Miscellaneous]
    17: ...he front page layout is very similar to what we ended up with at wiki.mythtv.org, but I do have one su...
    21: ...routers, and is [[Glossary:free software|free]] under the [[GPL]].
    27: ...at OK? Do we need a brief explanation and a more detailed one?
    30: ...k at the bottom to an article that goes more into detail about the subject should the person require m...
  28. Espanol (5,507 bytes)
    6: ...''[[¿Qué es DD-WRT?|Acerca de]]''' <br/> Acerca de DD-WRT
    10: |{{Click || image=FAQ.jpg | link=Index:FAQ | width=48px | height=48px }}
    11: |'''[[Index:FAQ|FAQ]]''' <br/> Preguntas frecuentes
    12: |{{Click || image=support.jpg | link=Index:Support | width=48px | height=48px }}
    13: |'''[[Index:Support|Soporte]]''' <br/> Soporte técnico
  29. USB storage (55,588 bytes)
    3: ...t.com/phpBB2/download.php?id=54383 USB Storage guide by egc] for more current instructions.
    8: = Current How-to / Quick guide (April 2021) =
    9: ...out (NAS) on my network, then I looked at this guide. It is excessively complex and antiquated in many...
    13: ...y successfully plugged in and used on a Windows 7 device.
    18: ...he actual samba name will be your router name, by default: DD-WRT). WORKGROUP: HOME. Minimum and Maxim...
  30. Wake-on-LAN (tutorial) (10,143 bytes)
    4: ...uters have the WOL feature - it might be listed under PME (Power Management Events).
    7: ...our home or office, and there is a DD-WRT-enabled device as the Internet gateway for that computer, po...
    12: # A PC which supports WOL. Most modern PC's can be set-up this way.
    14: ...ow, we assume your router LAN is 192.168.1.x (the default) and the static IP '''WOL''' computer is 192...
    15: ...ies of the first one. You can also use the DD-WRT device's Web Interface to send test packets, in plac...
  31. DD-WRT Docu (FR) (22,239 bytes)
    7: =Description du projet=
    8: Le but du Wiki de ce projet est de créer une documentation technique et d'installat...
    10: ...Wikis, celui-ci est maintenu par la collaboration de la communauté DD-WRT. Tous sont autorisés à é...
    13: ...tion de la bande passante, et le support logiciel des [http://kiel.kool.dk:27/ SD-Card].<br>
    14: ==Liste complète des fonctionnalités==
  32. Buffalo WBR-G54 WLA-G54 WLA-G54C WBR2-G54 WBR2-G54S (8,489 bytes)
    4: ...s extremely important! Buffalo routers have a tendency to keep old data in the nvram. I recommend fl...
    8: Also reference the [[Buffalo]] wiki, see [[Index:FAQ#Where_do_I_download_firmware.3F|Where do I d...
    10: ...this 2.32 version, after they had adjusted the header as shown below.
    15: '''Easy method: For some models you can use [[ddadder]] program....'''
    17: ... DD-WRT generic version with the added Buffalo header. After successful transfer please wait 2-3 min.,...
  33. DD-WRT Docu (IT) (14,289 bytes)
    5: ...precisioni o parti incomplete. Se vuoi puoi provvedere tu stesso alla modifica o inviare una mail a ma...
    8: Nello spirito del Wiki e dell'Open Source chiunque può collaborare a questo ...
    10: =Descrizione del progetto=
    13: ... reso possibile dalla collaborazione all'interno della comunità! Chiunque può scrivere, modificare ...
    16: ...orto software per l'utilizzo di SD-Card (modifica hardware).
  34. VLAN Detached Networks each with Wireless and Internet (4,809 bytes)
    11: ...l0.1. You can add another alias which can be included on the same public network. Leave these as bridg...
    13: ... 1 on the screen as this corresponds to port 4 in hardware.
    14: * Early hardware: http://www.tonns.org/openwrt/WRTSL54GS_layout_re...
    15: * GL hardware: http://garycourt.com/wp-content/images/WRT54_sw2...
    36: brctl delif br0 wl0.1
  35. TP Link Archer A7v5 (7,003 bytes)
    1: ==HARDWARE==
    2: https://wikidevi.wi-cat.ru/TP-LINK_Archer_A7_v5.x
    9: This is the placeholder for the A7v5.
    10: ...s to this device wiki. PM if you want something added here.
    12: ...nsume more memory and CPU and cause your speed to decrease. This router with Q.o.S. turned on is only ...
  36. Återställ från en dålig flash (907 bytes)
    4: ...tt du har förstört din router? Var inte orolig, det finns många saker för att få din router att f...
    6: ...sinfo/revival/ WRT54G Återställningsguide] inkluderar steg-per-steg instruktioner på engelska om hu...
    8: ...tility". Om du inte kan hitta "Firmware Auto-upgrade Utility", använd "[http://www.linksys.com/servle...
    10: [[Category:Flashing networking hardware/se]]
  37. Debugging PPPOE Problems (2,511 bytes)
    1: == Debugging PPPoE Problems ==
    3: ...WRT54G / WRT54GS doesn't have an integrated DSL modem,
    7: ...fter connecting the WRT54G(S) router to the DSL modem
    11: Reboot your DSL modem after you connected the router to it.
    14: To debug problems regarding PPPoE
  38. Useful Scripts (54,380 bytes)
    2: ...here: '''[[Main_Page|DD-WRT wiki mainpage]] / [[Index:Scripting|Scripting]] / Useful Scripts
    9: ...e a good reason for doing this, it should be considered a hack until the feature is implemented perman...
    36: Afterward put the line below inside a startup script
    50: Credit to hardwarewizard and frater
    74: # transfer - FTP Transfer ON/OFF (Default is OFF)
  39. Recover from a bad flash/it (583 bytes)
    8: ...puoi provare per riportarlo in vita prima di arrenderti e rassegnarti al fatto che il tuo (prima) bell...
    12: [[Category:Flashing networking hardware/it]]
  40. Switched Ports (21,983 bytes)
    10: ...use VLANs for the switch, as they have two independent Ethernet phys, so the switch is non-configurabl...
    13: ....g. Auto-Negatiate...Enabled), nothing else is needed.
    15: *Some changes made on the VLANs page do require additional manual co...
    17: ... The WLAN interface is bridged to the LAN VLAN by default. It is possible to bridge VLAN's to differen...
    20: ...[Default_internal_device_network|Default internal device network (vlan0, vlan1, eth0, eth1, eth2 etc)]...
  41. Afterburner (1,547 bytes)
    3: ...l DD-WRT enabled G routers. It is hardware independent. Afterburner will only improve speeds when used...
    5: ...er can be used in networks that also have 802.11b devices, and will not disable the use of them.
    6: * Afterburner can help in environments dense with wireless signals.
    25: ...enable Afterburner on the Advanced Settings tab under Wireless in DD-WRT.
    29: <br>http://en.wikipedia.org/wiki/125_High_Speed_Mode Wikipedia
  42. USRobotics USR5461 (11,735 bytes)
    3: ...ers based on a Broadcom or Atheros chip reference design.
    5: ...br>http://www.dd-wrt.com/wiki/index.php/Supported_Devices#US_Robotics
    10: ...VRAM which contains 128KB compressed CFE (Boot Loader). The rest of it (1870 KB) contains OEM/USR firm...
    27: Please, read and understand all instructions in this section and whiche...
    31: ...ave the selected DD-WRT firmware image file to '''Desktop\usr5461'''.
  43. LaFonera Hardware serial to ethernet (1,034 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / serial to ethernet'''
    8: ...he software to open a serial port console is included in the Fon's software packages.
    10: ...o you can use one or more <nowiki>:</nowiki> to indent your comment.
  44. Motorola WR850G (8,284 bytes)
    3: ... the bottom of the Router. It should be listed under the FCC ID ending as V2 or V1.
    5: The following instructions will only work with hardware versions v2 and v3 or the WR850G and the WR850GP....
    7: ...d on, you risk bricking the router when restoring defaults!'''
    9: ...t=51486], use this page to identify your router model correctly, and use the dd-wrt download search pa...
    19: ...ogus. Fixing the MAC in nvram is detailed in the debricking section on the WR850G v1 page and it work...
  45. DD-WRT on WR850G v1 (deutsch) (17,039 bytes)
    1: ...s ist nur eine reine deutsche 1-zu-1-Übersetzung der englischen Wiki von Stephen [[DD-WRT_on_WR850G_v...
    3: ... Katze oder Frau töten, Ihr Windows zerstören, oder ihren Chef verärgern usw. Das müssen sie selbs...
    7: ...ne Rückstellung in die Werkseinstellung (Factory default) ausführte und habe begonnen die FAQ zu les...
    9: ...rola: 4.03 und 5.13 (behobene Sicherheitsprobleme der 4.03) und 6.1.4, die zum Download verfügbar sin...
    11: ...(ich habe einige Ideen, es in die FW 4.03 einzubinden - aber, im Augenblick bin ich zu faul).
  46. WR850G v1 (26,232 bytes)
    3: ...t happen very often - I have to wait for the upgrade to v23sp1final before I can give any more informa...
    5: ... to fill them in - but make sure they apply to <b>hardware version 1</b> of the WR850G.</i>
    12: ...ortunately, there are a few pitfalls if you own a hardware version 1 (the one with the AC/DC converter in th...
    13: ...version on the label). See that page to get some idea first.<br>
    15: If you don't understand what the commands below are doing, please c...
  47. Airodump and using/overriding libraries (6,898 bytes)
    1: ...l libraries and override the existing ones, if needed. Airodump will be used for this example. Many of...
    11: -A halfway decent knowledge of what you're doing
    24: ... get more time on my hands. If I get this, I will definitely post it! If anyone has any info or wishes...
    35: ...he uclibc library. We obtain this by using the wonderful [[ipkg]] tool.
    38: uclibc - A standard c library for embedded systems
  48. Spanning Tree Protocol (29,361 bytes)
    1: ... of a computer network with or without loops. By definition a [http://en.wikipedia.org/wiki/Tree_(gra...
    3: ...R which can take into account factors that may be desirable in choosing a particular path, such as ban...
    9: ...e. This can cause certain services on the client device (such as DHCP) to time-out.
    18: (wrt/index.asp)
    41: Code:
  49. Point-to-Point PPTP Tunneling usando dos DD-WRT (3,530 bytes)
    3: ...siguiente configuracion fue hecha con dos wrt54g (hardware version 2.2) y el firmware "DD-WRT v23 SP1 (04/13...
    8: {| border=1 cellspacing=0 cellpadding=5
    9: | Direccion del ruteador A
    16: | "direccion_de_A.dyndns.org"
    25: {| border=1 cellspacing=0 cellpadding=5
  50. Factory Defaults (25,206 bytes)
    1: {{Languages|Factory Defaults}}
    3: ...etermine operating characterstics of the router under the factory firmware. See also [[Reset And Reboo...
    4: for additional info on this topic (''merge needed'').
    8: ''Merge needed with [[Hardware#NVRAM]].
    10: Every router has a memory chip inside that stores persistent settings between reboots. ...
  51. Installation (20,950 bytes)
    2: ... a method called flashing. This article helps you determine which installation process is for you on y...
    11: ...es working with DD-WRT, please see '''[[Supported Devices]]'''.
    13: ...ng with DD-WRT please see '''[[Known incompatible devices]]'''.
    15: ...ant to follow what is written for your particular device.
    18: For a list of recommended devices for installing DD-WRT, please see '''[[Firmw...
  52. Netgear R9000 (8,270 bytes)
    14: 10g interface - supported SFP hardware info: [https://forum.dd-wrt.com/phpBB2/viewtopic....
    17: =[https://wikidevi.wi-cat.ru/Netgear_R9000 Hardware Specifications]=
    19: ...t-align:center; position:relative; " width=50% border="1" cellspacing="0"
    37: | Serial: || yes, 4-pin header
    68: [[Index:FAQ#Where_do_I_download_firmware.3F|Download]] a...
  53. Accton (82 bytes)
    1: Please refer to [[Installation]] and [[Hardware-specific]] pages for further info.
  54. D-Link (234 bytes)
    1: ...Category:Networking hardware tutorials|Networking hardware tutorials]] pages for further info.
  55. Linksys WRT54G v2.2 (1,689 bytes)
    3: ==Hardware Specifications==
    4: https://wikidevi.com/wiki/Linksys_WRT54G_v2.2
    7: ...NOTE:'''</font> '''For flashing, only connect the device to the computer.'''<br>
    13: ...inksys webgui at 192.168.1.1: if a ''Management Mode'' page open, power cycle again
    15: #Go to ''Administration->Firmware Upgrade'' and select [ftp://ftp.dd-wrt.com/betas/2010/08-...
  56. USRobotics USR8200 (6,454 bytes)
    14: Reset the device to defaults.<br>
    16: ...ince the device has the Jungo loader installed by default we have to change it to Redboot to get DD-WR...
    18: You will need a lil [https://dev.openwrt.org/browser/trunk/scripts/flashing/jungo...
    20: ... Redboot itself. The latest version can be downloaded here: [http://mysite.verizon.net/jvasco/openwrt/...
    27: ...ailure, the only recourse is to install a JTAG header and restore the firmware via JTAG; so, use at yo...
  57. Linksys WRT54G-TM (9,840 bytes)
    5: ...ice, the only things that should be hooked to the device is the computer and power.'''<br>
    8: ...WRT54G-TM and WRT54G-RG are identical in terms of hardware '''but not the firmware''' so the CORRECT FILES M...
    15: *Recommended: Turn OFF/Disable any AV/Firewall on your PC.
    18: ...th the WRT54G-TM or k2.4 builds (''broadcom/'' folder).'''</font>
    20: ...ndows I suggest that you reset the router to it's defaults and set 2 LAN IP Address on your network co...
  58. Verizon FiOS - Using Your Own Router (6,751 bytes)
    1: ...help those who want to replace their Verizon-provided Actiontec router with one of their own.
    17: ... will all work. Make sure the cable is cleanly made, is free of kinks, is protected from damage, and ...
    20: '''Note:''' If you are using this article to guide you through the process, and you don't have anoth...
    42: ...oaded DD-WRT on it, MAKE SURE that you change the default login name and password, for your own good.'...
    47: # If you have FIOS residential service, you may not get a new WAN IP when y...
  59. LaFonera Hardware i2c (6,202 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / i2c'''
    10: [[Image:LaFonera_Hardware_i2c_-_01_overview.jpg]]
    14: ...i2c/i2c_gpio.pdf here (PDF)] [http://www.wildblue.de/fonera/i2c/i2c_gpio.pdf (mirror)].
    16: On the software side, my module is based on i2c-parport-light. Linux i...
  60. What is DD-WRT? (20,620 bytes)
    3: ...ers based on a Broadcom or Atheros chip reference design.
    5: ...ects. DD-WRT was created directly from Sveasoft's decision to start charging for their firmware, closi...
    7: ...hive.org/web/20071012064337/http://forum.bsr-clan.de/ftopic4612.html drafted] in the past by BrainSlay...
    9: ...d features not found in the OEM firmware of these devices, or even the firmware available for purchase...
    11: ... allocation, and software support for the SD-Card hardware modification.<br>
  61. Version Features (31,493 bytes)
    1: ...r source code], kernel and makefile configs, includes, and [https://svn.dd-wrt.com/browser/src/router/...
    3: ==Atheros Based Devices (incl. UBNT)==
    5: ... have one version of the firmware available per model. The feature set in Atheros builds are generally...
    7: ==Broadcom Based Devices==
    8: ... information about which versions can run on your hardware.
  62. WHR-HP-G54 (24,374 bytes)
    8: * Please include - antenna type, environment (indoor, outdoor, obs...
    15: ...se update this with the Maximum file size you can determine if it is bigger then the value above.
    18: ...byte SDRAM chips and a 4 Megabyte flash chip. The device has a total of 16Mb RAM and 4Mb Flash.
    30: cpu model : BCM3302 V0.8
    36: hardware watchpoint : no
  63. Hashes & Checksums (15,359 bytes)
    2: ...are packages, ISO images, or in our case a downloaded firmware binary. When we verify the hash, we ca...
    7: [https://secure.dd-wrt.com/wiki/index.php/Hashes_%26_Checksums the httpS version of th...
    9: Developers have begun posting the hashes of recent b...
    25: ...ab is installed, simply right-click on the downloaded firmware file, go to Properties > File Hashes ta...
    30: Open Terminal. (It's in the Utilities folder inside Applications.) Type:
  64. ¿Qué es "DD-WRT"? (11,698 bytes)
    5: [[Image:Wpa2.JPG|thumb|La Interfaz actual de DD-WRT v23/v24]]
    6: ...sr-clan.de/index.php?title=Installation#Supported_Devices Dispositivos Soportados].
    10: ...; debido a que Sveasoft comenzó a cobrar 20$ por descargar su software.
    12: ... grandes como las de empresas,bancos, etc.... Puedes encontrar un Bugtracker en:'' [http://www.dd-wrt...
    14: ...ra que funcionen las tarjetas SD/MMC que se le pueden instalar haciendo algunas modificaciones al disp...
  65. LaFonera Hardware Coloured Chassis (2,817 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Coloured Chassis'''
    13: When your device is dried, maybe it looks like this one
    15: [[image:LaFonera_Hardware_coloured_chassis.jpg]]
    22: ...eflecting from it (monitor & a mouse) to give an idea of the finish.
  66. Vxworkskiller de (757 bytes)
    1: ...ven Firmware zu flashen ohne auf JTAG oder andere hardware modifikationen zurückzugreifen
    5: ...eder reparieren. Das Risko ist gering, aber vorhanden
    6: #Es ist nach dem flashen nicht mehr möglich zur Originalen Firmw...
    10: '''Für den WRT54G v5 (Der v6 wurde noch nicht getestet):'''
    14: [[Category:Categories/de]]
  67. Instalación en el enrutador Motorola WR850G (7,207 bytes)
    1: ...uiere el uso de un firmware "mini" especial antes de el DD-WRT. Las versiones 1 y 2, tienen antenas re...
    4: ...ción sobre la version al reverso, esta basado en hardware levemente distinto, y (al menos con DD-WRT v23fin...
    6: ...des dañar tu router cuando restauras los valores de fábrica!</b>
    10: La instalación del Motorola WR850G es un proceso de varios pasos para obtener la versión completa o ...
    12: ...n completa y puede ser suficiente para la mayoria de los usuarios.<br>
  68. Instalación en el enrutador WRT54G(S) versión 5 (8,885 bytes)
    1: = Procedimiento de instalación sin JTAG =
    5: ...yo 01, 2011), me ha funcionado con mi <code>v5</code>. Lo que aquí resumo, simplificando un poco.
    8: ...ra sea en la subred 192.168.X.X/16 para poder acceder al router.
    9: ...ta, antes de comenzar este proceso, que <b>puedes dejar tu router inutilizable si algo va mal.</b>
    10: ...den seguir los pasos para restablecer el firmware de Linksys en: http://linksys.custhelp.com/cgi-bin/l...
  69. Netgear WNDR4500 (3,670 bytes)
    2: = Hardware Specs =
    4: {| border="1" cellspacing="0"
    41: {| border="1" cellspacing="0"
    83: ...(with header) '''.chk''' firmware file you downloaded from table above.</li>
    91: ====DD-WRT Upgrade====
  70. 什么是 "DD-WRT"? (53,158 bytes)
    7: ...费的,但 BrainSlayer [http://forum.bsr-clan.de/ftopic4612.html|起草了] (另外一种商业模...
    13: ...Gaming network] 的 [http://www.dd-wrt.com/wiki/index.php/Kai_Daemon Kai 守护程序]、[http://en.wi...
    15: ...么意思?其实就是德国德累斯顿 (Dresden) 的车牌字母。
    22: ...Linksys WRT54G/GL/GS 路由器或其他[Supported Devices|支持]的路由器
    27: {| style="font-size: 100%; text-align:center;" border=1 cellspacing=0 cellpadding=3 class="wikitable s...
  71. Optware (46,421 bytes)
    10: * [http://www.desipro.de/ddwrt/K26/ Kong K2.6 compiled builds] are however...
    14: ...ser-friendly tutorial, on how to use optware on older DD-WRT builds (until build [http://www.dd-wrt.c...
    18: ...tp://kiel.kool.dk/ SD/MMC Card], [[USB]]) is provided for packages.
    20: ...s now depend on /opt/lib/uClibc.so and dynamic loader also in /opt/lib with separate /opt/etc/ld-opt.s...
    29: ...e or optware-devel meta package provides complete development toolchain for compiling programs on rout...
  72. Quick list of Optware packages (104,401 bytes)
    2: 11 packages added from last August
    5: ...5.6-2 - Abook is a text-based addressbook program designed to use with mutt mail client.
    6: * ack - 1.94-1 - grep-like text finder
    9: * aget - 0.4.1-1 - Aget is a multithreaded HTTP download accelerator.
    11: * alac-decoder - 0.1.0-2 - A decoder for the apple lossless file format
  73. Development (20,697 bytes)
    1: {{Languages|Development}}
    2: For development of DD-WRT, you have two options:
    4: ...ke changes and compile it. This grants additional degree of freedom, but requires time, disk space and...
    8: Features include:
    12: * remove un-needed packages
  74. 刷新您的Buffalo WBR-G54,WLA-G54,WBR2-G54,WBR2-G54S... (5,336 bytes)
    4: '''WARNING: Use only dd-wrt v23 final (25.dec.2005) or v23 SP1 final (16.may.2006). Some beta ...
    18: Before flashing be sure to restore to factory defaults. Also check if you can connect to the route...
    20: Follow directions under [[Installation#Flashing_the_Buffalo_WHR-G54S_and...
    22: ...this 2.32 version, after they had adjusted the header as shown below.
    28: ... DD-WRT generic version with the added Buffalo header. After successful transfer please wait 2-3 min.,...
  75. MN-700 (10,914 bytes)
    3: ... Linksys WRT54G v5). The following links provide details regarding this hack:<br />
    5: *[http://jozerworx.com/tutorials/mn700/default.htm Jozerworx] version of LiamM's hack
    11: ...ardware than the MN-700, so the instructions provided by the links above work for the MN-700 but not t...
    14: ...will have to clear NVRAM through JTAG (recovery mode will NOT work).
    18: ...asus.com/download/download.aspx?SLanguage=en-us&model=WL-500g WL500G Stock Firmware], [http://oleg.wl5...
  76. Contribute (3,059 bytes)
    5: ===Contribute Code===
    6: ...nd how you can help, please visit the [[:Category:Developer resources]] section of the wiki.
    9: ...eed to send an email to info@dd-wrt.com with your desired username, requesting a wiki account be creat...
    10: You may consider fixing the errors, writing new How-Tos and trans...
    14: ... topics easily browseable. Any manually updated index pages tend to get outdated very fast and categor...
  77. Firmware FAQ (40,468 bytes)
    10: ...d [[Known_incompatible_devices|Known incompatible devices]]. Otherwise search the forums.
    31: ... check them against [[Supported_Devices|Supported Devices]]. There are routers with DD-WRT preinstalle...
    36: ...r first time flashing- where applicable in the folders).
    38: ...orted. If not, the first recommendation by most moderators will be to use the latest available beta bu...
    46: ...mware builds are beta releases with no or limited hardware testing. '''Proceed with caution!'''
  78. Known incompatible devices (18,777 bytes)
    1: {{Languages|Known incompatible devices}}
    5: There are ways to find out if your device '''will not''' be supported even if it isn't ...
    18: ...wrt is router firmware and does not support the modem part)
    21: ==List of Incompatible Devices==
    22: These devices were either tested with DD-WRT and failed, '...
  79. Bountiful BWRG1000 (105 bytes)
    3: [[Category:Networking hardware tutorials]]
    4: [[Category:Bountiful guides]]
  80. Version 5 And 6 Router Information (5,963 bytes)
    5: = Router Models Covered on This Page =
    7: In all later references we'll call these models "neutered". Why? Because they've had some cruci...
    9: ====Linksys WRT54G Neutered Models====
    14: ====Linksys WRT54GS Neutered Models====
    19: For more complete information on hardware revisions, visit Wikipedia:<br/>
  81. Reset And Reboot (4,732 bytes)
    3: ...her related and valuable information at [[Factory Defaults]].
    6: ...se methods '''will not unflash your router to the default firmware'''.
    7: They will reset to defaults such settings as IP address or password.
    11: ...ime, the router is usually reset back to firmware defaults.
    16: ...firmware to repopulate it. On some less-supported hardware this may have unpleasant results, so use the foll...
  82. D-Link DIR-615 rev C (10,866 bytes)
    4: =Hardware=
    6: ...self. This means it's quick and easy to check the hardware revision before buying or borrowing it.
    8: The factory default IP for this router is 192.168.0.1, user is "...
    10: ==Pros of this hardware==
    13: ...airly new hardware (released in 2009?), so it's widely available for purchase new.
  83. Internal device network (4,651 bytes)
    1: ... internal network connects the internal physical(=hardware):
    5: ...default internal device networks|default internal device network and services]].
    8: Via the user interface you can modify how the hardware is logically interconnected with each other and w...
    10: ...: It is easy to lock yourself out of your network device and if/when this happens (use the waiting tim...
    12: ...to restart the device, because it might just be a device service that need to be restarted.
  84. Miscellaneous/zh cn (971 bytes)
    6: ...rms and DD-WRT features with definitions and considerable explanations. A great place for reference an...
    9: ==Device-Specific Information==
    10: There are some pages that describe specific hardware with only loose
    21: * [[Hardware#NVRAM|NVRAM]]
    23: * [[Hardware#Overclocking|路由器超频]]
  85. LaFonera Hardware SD-Card (6,579 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / SD-Card'''
    16: A kernel module is required in order to use the MMC hack.
    20: ...el 2.6 is avaible. It uses gpio bitbanging, the code is currently being reworked a bit to make it look...
    24: * dev nodes do not get allocated automatically yet
  86. LaFonera Hardware Power-Sources (2,124 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Power-Sources'''
    6: When connected directly to a Li-ion battery, the device draws around 550ma with wireless on and 450ma...
    9: ...a stepup circuit. (or power LaFonera from the inside without the 3,3V regulator)
    11: ...ing in flames (literally) when shorted, over or under-charged. It is also better to get a proper LiIon...
  87. Linksys WRT54G/GL/GS/GX (4,360 bytes)
    3: DD-WRT supports all WRT54G models except for the v7.
    5: =Identifying Your Version=
    6: ...box or the underside of the router) represent the hardware revision:
    21: CDFK = WRT54G v7.2 (Currently widely spread in Finnish IT stores 13.5.2008)<br>
    50: DD-WRT supports all WRT54G models except for the v7.
  88. Linksys WRT54GS v7.0 & 7.2 (5,118 bytes)
    3: ==Hardware==
    16: ... or Remove Programs" (or "Programs and Features", depending on the Windows version) from the Start men...
    19: # Set a static IP address (outside DHCP range e.g. 192.168.1.10), connect the PC eth...
    22: #*# Right-click, go to the LAN device properties, then find and open the ''TCP/IPv4...
    24: #*#*Ensure this static IP is outside the DHCP range
  89. Installation/ja (27,080 bytes)
    11: ...スの一覧は、wikiのページ '''[[Supported Devices|サポートされるデバイス]]'''を参...
    13: ...覧は、wikiのページ'''[[Known incompatible devices|既知の非互換デバイス]]'''を参照...
    15: ...イスの場合、デバイス固有の情報が[[Hardware-specific]]ページで見つかるかもしれま...
    24: ...とはいえ、ピーコック スレッドと [[Hardware-specific|ハードウェア固有の情報]]ペ...
    26: ...クページの背景を知ったあとでは、[[Hardware-specific|ハードウェア固有の情報]]ペ...
  90. D-Link DIR-400 (5,069 bytes)
    5: ==[https://wikidevi.wi-cat.ru/D-Link_DIR-400_A1 Hardware] Specifications==
    6: {| border="1" cellspacing="0"
    34: ...or links to firmware. Look in the dlink-dir400 folder.
    39: In order to flash your router you need to do the followin...
    61: Default server: 192.168.0.2</pre>
  91. Gateworks Avila/Cambria Installation (14,682 bytes)
    5: ...le='color:red; font-weight:bold'>Please note: The details in these instructions apply specifically to ...
    7: file FLASHING.TXT for details.</div>
    9: ...works GW234x series Network Processor boards provide an excellent platform for building high performan...
    36: .... The firmware is (as of this writing) located under the '''beta''' subsection in a directory called ...
    37: ...ORKS%2F&download=flashing.txt flashing.txt] which describes, albeit in very abbreviated terms, the ess...
  92. Linksys WAP54G Hardware Spec (3,039 bytes)
    3: Model No: WAP54G<br>
    5: Hardware spec:<br>
    12: [[Image:inside_wap54g.jpg]]<br>
    13: ''Inside Wap54g''<br>
    20: ... was able to add his support for SD - I'll try to describe it here:
  93. Mikrotik Routerboard RB/532 (3,688 bytes)
    6: ...ekris Engineering Net4801]), this power-efficient design performs 2 to 3 times faster thanks to a MIPS...
    8: ...faces (9 Ethernet ports and 6 MiniPCI slots). A wide range of accepted input power means that you can ...
    10: RouterOS and Linux (reference Debian GNU/Linux image and source available) can be ...
    18: ...=8007 noted in the DD-WRT forums] that due to the design of this board, the ethernet switch ports cont...
    23: {| border=1 cellspacing=0 cellpadding=5
  94. Supported Devices (242,203 bytes)
    4: December 3rd, 2019 (Updated June 7, 2022)
    8: ...may actually be really bad builds for your router hardware and cause a lot of issues.
    12: ..."beta" FTP/HTTPS site to see if you can find your hardware.
    13: ...ee how they work for a particular piece of router hardware.
    14: ...quotes with the word AND (in uppercase) plus your hardware or issue to perform your search.
  95. AutoAP (11,662 bytes)
    5: '''NOTE:''' There has been no active development of AutoAP since 2009-07-13. This add-on ...
    9: ...t Mode]], or [[Wireless_Bridge | Client-Bridged Mode]].
    12: :''Before using this guide, it is recommended that you know how to:<br>''
    13: ... [[Installation | flash your device]]<br>
    15: ...nt Mode]] or [[Wireless_Bridge | Client-Bridged Mode]].<br>
  96. Linksys WRTSL54GS (13,481 bytes)
    2: ... are open for many different applications of this hardware.
    32: /dev/root 2880 2880 0 10...
    33: /dev/mtdblock/4 4352 2536 1816 5...
    67: Setting the PFC to its default value
    68: Determined physical RAM map:
  97. Micro-plus (26,693 bytes)
    3: ==Description==
    4: ...bout.html Busybox] functionality, such as an expanded shell prompt, tab completion, and '''ls''' and '...
    8: ==Can my device run micro-plus?==
    9: ...flash can run it no problem. But the focus is on devices having only 2MB flash:
    11: ...y to run micro-plus must have a small CFE (bootloader) of 128K in size. You can check if your router ...
  98. LaFonera Info Hardware-Specifications (3,830 bytes)
    3: ...Fonera_(en)|LaFonera]] / [[LaFonera_Info|Info]] / Hardware-Specifications'''
    5: == The Hardware Specifications ==
    6: === Model 2100 ===
    13: * Antenna Omni-Directional detachable antenna (2dBi)
    19: === Model 2200 ===
  99. LaFonera (en) (6,555 bytes)
    7: [[LaFonera_(en)|english]] [[LaFonera_(de)|deutsch]] [[LaFonera_(fr)|français]]
    10: {| border="0" style="margin: 1em auto 1em auto" <!--This s...
    13: |style="width:48px;"|{{Click || image=Gnome-dev-jazdisk.png | link=:Category:LaFonera_Software_(...
    16: ...=Yast_hardware_info.png | link=:Category:LaFonera_Hardware_(en) | width=48px | height=48px }}
    17: ...Fonera_Hardware_(en)|LaFonera Hardware]]''' <br/> Hardware related documentation
  100. LaFonera Software Flashing (30,993 bytes)
    1: ...t=51486], use this page to identify your router model correctly, and use the dd-wrt download search pa...
    12: ... RedBoot via serial and change this or flash your device through serial.<br />
    34: ...ur Windows machine (it's a simple no-installer-needed HTTP server). If the link does not work, try [ht...
    35: ...g" pane of System Preferences. Use the "Sites" folder in your home directory to serve files.
    38: .... your router, switch, hub, whatnot firmware upgrade or backup, or configuration backup and restore))'...
  101. LaFonera Hardware Second-Antenna (7,482 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Second-Antenna'''
    19: ...red. That allows me to leave the 2 antennas at 90degrees of one another without rubbing at the base.
    20: [[Image:FON_dremel_outside.jpg|thumb|none|Image of the hole that I dremeled....
    23: =Soldering=
  102. LaFonera Hardware JTAG (268 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    4: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / JTAG'''
    7: For now take a look at [[LaFonera_Hardware_IO_(en)]]
  103. LaFonera Hardware USB (9,766 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / USB'''
    7: ...ect it directly to a PC USB port. This mod just added a usb connector, but not a USB CONNECTION!!!
    11: ...on than fixing a large, ugly serial port to the side of the LaFonera. '''Note - This is just a method ...
    13: ... LaFonera, so read this article first: [[LaFonera_Hardware_Serial-Cable-Port]].
  104. LaFonera Software Chilispot (12,365 bytes)
    8: ...he ddwrt firmware for the LaFonera is still under development and is working great for the most part, ...
    15: # A LaFonera! 21xx models as the 22xx use a different memory allocation!
    17: ...to setup a http/ftp server locally, which is outside the scope of this howto).
    18: ...nd root.fs build of ddwrt for atheros WiSOC based hardware, I used root.fs and vmlinux.bin.l7 ((06/10/07) st...
    21: ....wifi-cpa.com and you will also need the unique code that is generated once you've created a hotspot w...
  105. LaFonera Hardware Power-over-Ethernet (3,201 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Power-over-Ethernet'''
    8: ...nsive, several 10´s of euros each, but might be ideal in this case.
    12: ... I think, identical to an SMC unit we use (looks identical when opened up, same circuit and component ...
    21: ...s)'' Alternatively you should build a switching-mode step-down DC converter, [http://www.hobbielektron...
  106. LaFonera Hardware Serial-Cable-Port (6,917 bytes)
    1: [[Category:LaFonera_Hardware_(en)]]
    2: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Serial-Cable-Port'''
    6: {| border=0 cellspacing=0 cellpadding=5
    7: | [[Image:LaFonera_Hardware_Serial-Cable-Port_01.jpg]]
    17: See [[LaFonera_Hardware_Disassembling|LaFonera Hardware Disassembling]] for how to dissassemble your rout...
  107. LaFonera Software Debricking (6,898 bytes)
    3: .../ [[:Category:LaFonera_Software_(en)|Software]] / Debricking'''
    9: ...http://fonerahacks.com/index.php/Tutorials-and-Guides/How-to-Access-Redboot.html fonerahacks.com]
    14: ...telnet procedure went fine. So try this before soldering that serial-cable ;)
    18: ...d that’s about it. You can find some [[LaFonera Hardware Serial-Cable-Port | instructions for making a ser...
    22: ... also a 3.3V VCC at pin 2, but since my MAX232 needed 5V, i didn’t bother.
  108. LaFonera Hardware Disassembling (1,764 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Disassembling'''
    5: == Inside the fon router==
    7: {| border=0 cellspacing=0 cellpadding=5
    8: | [[Image:LaFonera Hardware Disassembling 01.png]]
  109. LaFonera Software Universal-Repeater (25,850 bytes)
    8: So i decided to port it to work on dd-wrt. Yet I think the ba...
    10: ...he files which are nessesary on my websrver and made them available to the rest of you.
    18: wget http://www.wildblue.de/universalRepeating.tar.gz
    30: I made it as good working as possible, but i think some ...
    32: feel free to contact me at ben(at)wildblue.de
  110. Siemens SE505 (3,810 bytes)
    1: ...t=51486], use this page to identify your router model correctly, and use the dd-wrt download search pa...
    3: ...you have additionally to check your configuration details after flashing.
    16: ...xceptions to this rule. This can be done by yast oder you simply type as root user:
    19: ...92.168.2.0 netmask 255.255.255.0 gw 192.168.2.100 dev eth0:1
    29: ...changed your router's IP, you have to restore the default IP to 192.168.2.1. This can be done by acces...
  111. Hardware DIY (1,115 bytes)
    1: {{Languages|Hardware_DIY}}
    3: ==Hardware List==
    5: ...cated on their router's particular wiki page. A wider range of mods can be found on the OpenWRT wiki p...
    7: ...es are listed here: [[Supported_Devices|Supported Devices]]<br>
    8: ...: [[Known_incompatible_devices|Known Incompatible Devices]]
  112. SES Button (2,058 bytes)
    6: In order to get the SES/AOSS/EZ-SETUP to work, you must h...
    53: [[Category:Networking hardware]]
  113. LaFonera Hardware Cooling-System (11,159 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Cooling-System'''
    13: ...ue I'm not looking forward to my case melting and destroying itself.
    24: *Soldering Iron
    25: *Solder
  114. LaFonera Software Client-Bridge (9,933 bytes)
    2: ...Fonera_Software_(en)|Software]] / Client Bridge Mode'''
    5: ==Client Bridge Mode==
    7: ... of by cable (allowing the same features of wired devices).
    11: ...devices connected to the Fonera, so all connected devices will be listed in your host router's setup p...
    14: =Separate Guides=
  115. LaFonera Hardware Controlling AC-Loads (4,663 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Controlling AC-Loads'''
    15: == Hardware ==
    18: [[image:LaFonera_Hardware_Controlling_AC-Loads_-_01_ready_to_start.jpg]]
    20: [[media:LaFonera_Hardware_Controlling_AC-Loads_-_highres_01_ready_to_start....
  116. LaFonera Hardware Roboter Controlling (2,339 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Roboter Controlling'''
    15: == Hardware ==
    18: [[image:LaFonera_Hardware_Roboter_Controlling_-_03_complete_robot_front.jpg...
    20: [[media:LaFonera_Hardware_Roboter_Controlling_-_highres_03_complete_robot_f...
  117. How to open my router (2,424 bytes)
    7: 1. Remove antenna, desktop stand, etc.
    23: ...tton on the other end of the router. Set Bezel aside.
    25: ...he panel will slide free of the router. Set it aside.
    29: ...rx bit or driver, remove this screw and set it aside. See Figure 5.
    34: ... will lift away from the router. Set the strip aside. See Figure 6.
  118. Default internal device network (6,480 bytes)
    1: = Description =
    2: ... for you from the perspective of internal network devices and the data flows between them.
    5: ...ee the command below to find out which one your model uses.]]
    7: == Illustration of mappings (pre-N, B/G devices) ==
    8: ...ppings in a B/G (pre-N) device - specifically the default configuration of a DD-WRT V23-SP2 firmware o...
  119. LaFonera Hardware Logo-Removal (2,569 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Logo-Removal'''
    5: ...a_Hardware_Logo-Removal_(de)|deutsch]] [[LaFonera_Hardware_Logo-Removal_(fr)|français]]
    9: Metal polish is powerful enough to abrade metal, which means that the solvent is also stron...
    13: === Things needed ===
  120. LaFonera Hardware Replace LEDs (6,702 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Replace LEDs'''
    5: ...a_Hardware_Replace_LEDs_(de)|deutsch]] [[LaFonera_Hardware_Replace_LEDs_(fr)|français]]
    11: I decided to change the colour of the LaFonera Status LEDs...
    13: ...ple to do this modification - if you have some soldering skills.
  121. JTAG pinouts (4,665 bytes)
    4: ... look is [https://wikidevi.com/wiki/Main_Page Wikidevi]
    40: ==Asus WL500g Deluxe==
    47: watch out for RA11 (under the minipci)<br>
    66: [http://wiki.openwrt.org/OpenWrtDocs/Hardware/Buffalo/WBR-G54 WBR-G54 JTAG Info]
    70: [[http://www.dd-wrt.com/wiki/index.php?title=JTAG_pinouts&action=submit#Buffalo_WBR...
  122. Serial port pinouts (6,672 bytes)
    2: .... Also try searching forums here and at OpenWRT/LEDE.
    4: ... using the ''Embedded image'' button in Editing mode.
    14: ==Asus WL-500 Deluxe==
    60: ...e). It does not work in host mode to control USB devices. The VCC pin puts out 3.3V.
    86: ... VCC is 3.3V. RX has a pull-up resistor. Port is /dev/tts1.
  123. LaFonera (de) (7,731 bytes)
    1: [[Category:LaFonera_(de)]]
    2: Du befindest dich hier: '''[[Main_Page|DD-WRT Wiki Hauptseit...
    4: [[LaFonera_(en)|english]] [[LaFonera_(de)|deutsch]] [[LaFonera_(fr)|français]]
    7: {| border="0" style="margin: 1em auto 1em auto" <!--This s...
    10: ...v-jazdisk.png | link=:Category:LaFonera_Software_(de) | width=48px | height=48px }} <!--Feel free to c...
  124. LaFonera (fr) (6,073 bytes)
    4: [[LaFonera_(en)|english]] [[LaFonera_(de)|deutsch]] [[LaFonera_(fr)|français]]
    7: {| border="0" style="margin: 1em auto 1em auto" <!--This s...
    10: |style="width:48px;"|{{Click || image=Gnome-dev-jazdisk.png | link=:Category:LaFonera_Software_(...
    11: ...onera Software]]''' <br/> Documentation à propos des logiciels
    13: ...=Yast_hardware_info.png | link=:Category:LaFonera_Hardware_(fr) | width=48px | height=48px }}
  125. LaFonera Hardware Logo-Removal (de) (2,955 bytes)
    2: [[Category:LaFonera_Hardware_(de)]]
    3: ...Fonera_(de)|LaFonera]] / [[LaFonera_Hardware_(de)|Hardware]] / Logo-Entfernung'''
    5: ...a_Hardware_Logo-Removal_(de)|deutsch]] [[LaFonera_Hardware_Logo-Removal_(fr)|français]]
    7: == Entfernung des Logos mit Metallpolitur ==
    9: ... auch das es genügend Kraft besitzt um die Farbe des fon.com Logos zu entfernen.
  126. LaFonera Hardware Logo-Removal (fr) (2,529 bytes)
    2: [[Category:LaFonera_Hardware_(fr)]]
    3: ...Fonera_(fr)|LaFonera]] / [[LaFonera_Hardware_(fr)|Hardware]] / Logo-Removal'''
    5: ...a_Hardware_Logo-Removal_(de)|deutsch]] [[LaFonera_Hardware_Logo-Removal_(fr)|français]]
    9: ...t of the FON logo on La Fonera. [http://only-suicide-girls.ru]
    13: === Things needed ===
  127. LaFonera Hardware 32MB SDRAM MOD (5,063 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / 32MB SDRAM MOD'''
    11: ...LE sided ram. Since single sided ram chips are harder to find, I choose to go with SO-DIMM for noteboo...
    21: ...y not for those that have not done any kind of soldering before. With that out of the way, we an proce...
    23: ... If done properly, there won't be enough solder under the pads to keep the chip on when a little bit o...
  128. LaFonera Hardware Replace LEDs (de) (6,319 bytes)
    1: [[Category:LaFonera_Hardware_(de)]]
    2: ...Fonera_(de)|LaFonera]] / [[LaFonera_Hardware_(de)|Hardware]] / Replace LEDs'''
    4: ...a_Hardware_Replace_LEDs_(de)|deutsch]] [[LaFonera_Hardware_Replace_LEDs_(fr)|français]]
    6: = Austausch der grünen LEDs =
    7: ... Du wie Du die grünen LEDs Deiner LaFonera mit andersfarbigen austauschen kannst'''
  129. LaFonera Hardware Replace LEDs (fr) (5,848 bytes)
    2: [[Category:LaFonera_Hardware_(fr)]]
    3: ...Fonera_(fr)|LaFonera]] / [[LaFonera_Hardware_(fr)|Hardware]] / Replace LEDs'''
    5: ...a_Hardware_Replace_LEDs_(de)|deutsch]] [[LaFonera_Hardware_Replace_LEDs_(fr)|français]]
    8: ...comment remplacer les LEDs vertes de LaFonera par des bleues.'''
    10: ... dans mon environnement (mise à part mon amie) a des LEDs bleues: PC, enceintes, voitures...
  130. LaFonera Hardware Power from USB (8,045 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Power from USB'''
    6: ...ou, to use as a portable access point, or to provide wireless access for a laptop? I think so. :)
    8: ...for 2000 milliamps at 5v. USB ports can only provide 500 milliamps per port. If the load gets to high ...
    12: =Parts Needed=
  131. LaFonera Hardware New Paint Job (1,237 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / New Paint Job'''
    22: ==Parts Needed==
  132. LaFonera Hardware IO (en) (4,576 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / IO'''
    6: In order to create more mods, we need to know what we hav...
    8: In order to get this started, I am putting down what I ha...
    13: ...: http://wiki.openwrt.org/OpenWrtDocs/Customizing/Hardware/JTAG_Cable and here: http://tech.am/2006/10/06/au...
  133. Linksys WRT300N v1, v1.1 (6,576 bytes)
    7: * Hardware Defaults (with Linksys firmware)
    12: * DD-WRT Defaults (dd-wrt.v24 beta)
    17: ==Hardware Information==
    19: [https://wikidevi.wi-cat.ru/Linksys_WRT300N_v1.0 Linksys WRT300N ...
    21: [https://wikidevi.wi-cat.ru/Linksys_WRT300N_v1.1 Linksys WRT300N ...
  134. LaFonera Hardware Modding (636 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Modding'''
    7: [[Image:LaFonera_Hardware_Modding_-_01_front.jpg]]
    9: [[Image:LaFonera_Hardware_Modding_-_02_side.jpg]]
    11: [[Image:LaFonera_Hardware_Modding_-_03_ahead.jpg]]
  135. SD/MMC mod (263 bytes)
    3: ...D-Kartenlesers an den Linksys WRT54G]] - Original descriptions (in german)
    6: [[Category:Hardware]]
  136. Linksys WRT54G2 v1.0 (18,520 bytes)
    5: ==Hardware==
    6: https://wikidevi.com/wiki/Linksys_WRT54G2_v1.0
    10: Unlike most WRT54* models, the BCM5354 clock is locked and cannot be over...
    19: #Reset the router to defaults on the Linksys Admin page, then let it rebo...
    23: ...to the ''VxWorksKiller-G2V1-new.bin'', press Upgrade and wait 120 seconds for it to reboot itself
  137. 安装 (16,952 bytes)
    7: 请点击前往'''[[Supported Devices|支持设备]]'''查看 DD-WRT 支持的设...
    9: 建议您参考[[Index:Support|索引:支持]],了解如何请求您...
    13: ...fy your hardware and not create a problem that renders your router useless.
    15: ... may be the most useful page for you in terms of identifying your router, figuring out what files you ...
    18: ...''' information - instead of just going by what model you think you have - [[User:Clock|clock]].
  138. 硬件专用信息 (4,351 bytes)
    1: {{Languages|Hardware-specific}}
    2: ...?t=51486], use this page to identify your modem model correctly, and use the dd-wrt download search pa...
    4: Please also see in [[:Category:Networking hardware tutorials]]
    6: ...rdware-specific]] explanations. This has been condensed from a longer form into individual instructio...
    8: =Hardware Brand=
  139. LED Scripts (37,693 bytes)
    1: ...here: '''[[Main_Page|DD-WRT wiki mainpage]] / [[Index:Scripting|Scripting]] / LED Scripts
    9: ...ol which LED's on Broadcom devices see [[Broadcom_detection#We_finally_installed_DD-WRT_but_no_button....
    60: This is for the WRTSL54GS model only.
    75: see the [https://dd-wrt.com/wiki/index.php/Linksys_WRT1900AC#LEDs_and_GPIO_pins WRT1900...
    178: 13 Mode Button 00 Pressed
  140. Прошивка WL-500W (10,168 bytes)
    14: Mini-Asus.trx http://www.dd-wrt.com/routerdb/de/download/Asus/WL500W/-/dd-wrt.v24_mini_asus.trx/3...
    16: Mega Genegic http://www.dd-wrt.com/routerdb/de/download/Asus/WL500W/-/dd-wrt.v24_mega_generic.bi...
    113: ... в вкладку Administration - Firmware Upgrade.
    115: ...чекбокс After flashing reset to - Reset to defolt setings
    117: ...ираем файл mega_generic и жмем Upgrade
  141. Прошивка WL-500W с подробными скрин-шотами (10,274 bytes)
    14: Mini-Asus.trx: http://www.dd-wrt.com/routerdb/de/download/Asus/WL500W/-/dd-wrt.v24_mini_asus.trx/3...
    16: Mega Genegic: http://www.dd-wrt.com/routerdb/de/download/Asus/WL500W/-/dd-wrt.v24_mega_generic.bi...
    121: ... в вкладку Administration - Firmware Upgrade.
    123: ...чекбокс After flashing reset to - Reset to defolt setings
    125: ...ираем файл mega_generic и жмем Upgrade
  142. Linksys E2100L (2,608 bytes)
    1: ===Hardware Information===
    6: {| border="1" cellspacing="0"
    45: ...the Linksys stock firmware and choose to reset to defaults.
    50: ...in DD-WRT's webUI, go to Administration > Factory Defaults
    51: #Select to "Restore Factory Defaults" This will effectively hard reset the route...
  143. Linksys E800 (3,220 bytes)
    1: =[https://wikidevi.wi-cat.ru/Linksys_E800 Hardware Information]=
    3: {| border="1" cellspacing="0"
    5: | Broadcom [https://wikidevi.wi-cat.ru/Broadcom#.28a.29bgn_3 BCM5357]
    37: ...e a build older than 21676, as E800 support was added then.
    39: ...tial flash, and nv64k (or trailed) builds to upgrade!'''
  144. Main Page (1,889 bytes)
    10: |{{Click || image=FAQ.jpg | link=Index:FAQ | width=48px | height=48px }}
    11: |'''[[Index:FAQ|FAQ]]''' <br/> Frequently Asked Questions
    12: |{{Click || image=support.jpg | link=Index:Support | width=48px | height=48px }}
    13: |'''[[Index:Support|Support]]''' <br/> Technical Support
    15: |{{Click || image=Konsole.png | link=Index:Scripting| width=48px | height=48px }}
  145. LaFonera Hardware Controlling AC-Loads via webinterface (4,497 bytes)
    1: [[Category:LaFonera_Hardware_(en)]]
    2: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Controlling AC-loads via web-interface'''
    7: '''You will destroy the original Web-interface with this startup...
    24: == Parts needed ==
    31: : [[Image:LaFonera_Hardware_Controlling_AC-Loads_via_webinterface_-_04_overvi...
  146. Installation/fr (33,890 bytes)
    2: ...teur -s'il est compatible avec DD-WRT - ainsi que des informations qui s'appliquent à tous les routeu...
    4: ==Choisir le bon logiciel embarqué - '''De la plus haute importance'''==
    6: En premier lieu, consultez la base de données : http://www.dd-wrt.com/site/support/ro...
    10: ...vous à la page du wiki intitulée '''[[Supported Devices| Matériels compatibles]]'''.
    12: ...ée '''[[Known incompatible devices| Matériels identifiés comme incompatibles]]'''.
  147. Fr:materiel (2,134 bytes)
    1: ==Modifications Hardware==
    8: ...ess.net/wiki/materiel:biquad Augmenter la portée de votre routeur avec une antenne à gain]<br>
    11: ...du numéro de série (regardez sur la boite ou en dessous du routeur) donnent la version du routeur :
    22: ...Works VxWorks] non Linux et ram/flash 8/2 au lieu de 16/4, or le firmware flash fait 3.4mo en moyenne)...
    23: ...ed>Note ajoutée le 30/11/2006</font> : '''l'upgrade est maintenant possible avec DD-WRT v23-SP1 micro...
  148. Optware, the Right Way (36,809 bytes)
    9: ...e looking for OTRW2 [http://www.dd-wrt.com/wiki/index.php/OTRW2_%28Optware_the_right_way_Take_2%29 ple...
    18: * All [http://www.desipro.de/ddwrt/K26/ Kong builds] based on Kernel 2.6
    25: ... enable Optware on your Router. It is '''recommended''' that you have a router with USB capable stora...
    34: Default Services that will be installed:
    38: ...tomounting, Unmounting and Hotmounting of storage devices''' - Automatically mounts all recognized par...
  149. LaFonera Hardware SD-Card/Reader Position (6,152 bytes)
    1: ...re]] / [[LaFonera Hardware SD-Card|SD-Card]] / Reader Position'''
    3: ...ates a possible way of mounting an SD/MMC card reader onto the Fonera.
    5: ...r|658px|Fonera with a blue SD card in the card reader]]
    10: ...r [[LaFonera_Hardware_SD-Card#Cheap_SD_Card_.22reader.22_.28floppy_cable.29|make your own]]
    12: * Some thin solder for soldering
  150. WHR-HP-AG108 (13,246 bytes)
    10: ==Hardware==
    17: - Antenna detachable (reverse-sma) <br>
    20: ...fcc.gov/oetcf/eas/reports/ViewExhibitReport.cfm?mode=Exhibits&RequestTimeout=500&calledFromFrame=N&app...
    23: ... than WRT54G's), and its output level is fixed in hardware at 12 dBm. You may want check out [https://fjallf...
    47: Create a directory on your desktop for the root.fs, lzma_vmlinuz, and RedBoot_c...
  151. USB (11,810 bytes)
    6: ...Supported Devices]], some support USB. These include the:
    10: *[[Asus WL-520GU]] and various devices in this same series
    21: Note: If the router hardware has a USB port, dd-wrt probably supports it. It m...
    23: ..., then using a startup script to mount individual devices. See [[USB storage]] for instructions and ex...
    25: ...ng on capability, but the ability to add external hardware easily makes these far more powerful units.
  152. Linksys WRT55AG v2.0 (614 bytes)
    3: ...' matrix unless whoever redid that on 13 MAY 2010 deleted them. The swivel/jointed rubber duck antenna...
  153. Linksys E1550 (3,454 bytes)
    5: =Hardware Information=
    7: {| border="1" cellspacing="0"
    44: ...the router name) '''only use nv60k builds to upgrade''' with or you will brick your unit!'''
    50: .../192.168.1.1 Linksys Web Interface] Firmware Upgrade page
    60: *The '''nv60k Big''' build provides USB support (also NTFS, unlike mega), unlike the...
  154. Linksys E1500 (7,663 bytes)
    3: =Hardware [https://wikidevi.com/wiki/Linksys_E1500 Information]=
    5: {| border="1" cellspacing="0"
    40: ...it) '''only use nv64k (or trailed) builds to upgrade''' with or you will brick your unit. Don't confus...
    44: # Do a [http://www.dd-wrt.com/wiki/index.php/Hard_reset_or_30/30/30 30/30/30] reset on ro...
    46: .../192.168.1.1 Linksys Web Interface] Firmware Upgrade page
  155. Linksys E900 (3,213 bytes)
    1: =[https://wikidevi.wi-cat.ru/Linksys_E900 Hardware Information]=
    3: {| border="1" cellspacing="0"
    5: | Broadcom [https://wikidevi.wi-cat.ru/Broadcom#.28a.29bgn_3 BCM5357]
    37: ...e a build older than 18946, as E900 support was added then.
    39: ...tial flash, and nv64k (or trailed) builds to upgrade!'''
  156. Broadcom detection (3,378 bytes)
    5: ...ls in general how you can get your Broadcom-based device running DD-WRT.
    7: =About this guide=
    9: ...to start" & "Compatibility" work for every device/hardware, except the cfe and nvram grabbing stuff.
    11: http://www.dd-wrt.com/site/support/router-detection
    19: * check the [[Supported Devices]] page if your device isn't supported already!
  157. LaFonera Hardware LCD Screen (3,119 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / LCD Screen'''
    9: [[Image:LaFonera_Hardware_LCD_Screen_-_01_fonera_LCD.jpg]]
    12: La Fonera is a really nice toy. I have already deacivated serial console because of playing with IR...
    14: ...der for storing images and animations. The uLCD model can only display simple stuff (line, cercle, tex...
  158. LaFonera Hardware IR Receiver (4,545 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / IR Receiver'''
    8: ...ite simple. All you need is a TSOP receiver, a diode, a resistor and a78L05 regulator as explained her...
    10: ... RX line. It can be used with USB/serial and embedded system with simple serial port like… La Fonera...
    13: [[Image:LaFonera_Hardware_IR_Receiver_-_01_pcb.jpg]]
  159. LaFonera Hardware LaFoneraPlus (12,883 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / LaFoneraPlus'''
    7: ...than the classical Fonera except that’s it include two ethernet interfaces. This can be very usefull...
    10: [[image:LaFonera_Hardware_LaFoneraPlus_-_01_case.jpg]]
    12: ...test it like a FonSpot, i want to take a look inside.
  160. WRT54GL MAX232 Serial (6,868 bytes)
    3: ...licable to several other models based on the same hardware (WRT54G line et all). The MAX232 is a level conve...
    9: ...n order to work properly, and the pin header provides 3.3v.
    11: ... provides excellent performance. Since the MAX232 detects a signal level change at around 2v and we're...
    15: ... down the charge pump that builds the 10/11Vpp needed at Tx outputs.
    17: == Details ==
  161. PC-Engines (12,674 bytes)
    4: ...National Semiconductor chips. AMD bought the CPU devision some years ago and relabled the CPU's. <br>
    13: *CF-cardreader
    22: dd if=/*serial.image of=/dev/"media"
    25: *x86 webupgrade version if dd-wrt is already running
    29: dd-wrt-webupgrade images are for upgrading using the webinterface t...
  162. Hashes (98 bytes)
    3: ...[[Category:Flashing networking hardware]]</noinclude>
  163. Ddadder (757 bytes)
    6: ...ko wrote a small program that adds the Buffalo header to dd-wrt generic firmware. Use it for initial f...
    9: ==Supported Hardware==
    15: wbr-b11(use model string 'wbr-g54')<br>
    23: ==get DDadder==
    25: ...rt.com/phpBB2/viewtopic.php?t=12166&highlight=ddadder forum] or
  164. TFTP flash (16,402 bytes)
    5: ...ial flash '''or''' a TFTP recovery flash for your device.
    8: ...ices]], the device wiki, or the forum for recommended files.
    10: ... possible) or ''micro'' build for 2&nbsp;MB flash devices
    11: ...then start a continuous ping (''-t'' switch is needed for this in Windows) to the router
    13: #*TTL=64 means application code has been reached. If the router isn't responding,...
  165. Italian (1,683 bytes)
    10: |{{Click || image=FAQ.jpg | link=Index:FAQ | width=48px | height=48px }}
    11: |'''[[Index:FAQ|FAQ]]''' <br/> Frequently Asked Questions
    12: |{{Click || image=support.jpg | link=Index:Support | width=48px | height=48px }}
    13: |'''[[Index:Supporto|Supporto]]''' <br/> Supporto tecnico
    15: |{{Click || image=Konsole.png | link=Index:Scripting| width=48px | height=48px }}
  166. Changelog (7,371 bytes)
    1: ...n.dd-wrt.com/timeline Timeline] for most recent code changes.
    8: * '''new devices''':
    9: ...per LED/Reset button functioning (see [[Supported Devices]]).
    12: ** developer support
    14: ...r Bridge]], and [[Universal Wireless Repeater]] modes
  167. Gateworks Avila GW234x (30,744 bytes)
    5: All '''developer team''' for this great firmware.
    7: Gateworks for this device.
    16: ...rver''' and '''telnet''' packages (and their dependences) and copied '''zImage''' and '''root.fs''' to...
    20: # default: off
    21: # description: The tftp server serves files using the ...
  168. Linksys WRT1900AC (7,260 bytes)
    2: ...uctions have only been tested on the [https://wikidevi.com/wiki/Linksys_WRT1900AC_v1 Linksys WRT1900AC...
    4: .../Linksys_WRT1900ACS WRT1900ACS], and [https://wikidevi.wi-cat.ru/Linksys_WRT3200ACM WRT3200ACM] and ot...
    8: ... do I download firmware?]] for download links and details.
    9: #Go to the appropriate model build directory:
    16: ...s to download and install. Do them both in this order:
  169. Repeating Mode Comparisons (6,438 bytes)
    1: ...utorials]] / [[Linking Routers]] / '''Repeating Mode Comparisons'''
    6: ... using "WDS" vs "Repeater" vs "Repeater Bridge" modes.
    14: ** On R, two SSIDs with the same name will collide (give problems) (TODO: Confirm). On RB, having th...
    15: ...e same MAC, they probably will collide. For RB mode the MAC address is 00:XX:XX:XX:XX:01. - redhawk
    18: ...with wrt150n1.1 AP + wrt54g6 R] (TODO: test other hardware). R/RB support all encryption algorithms.
  170. Linksys (267 bytes)
    1: ...Category:Networking hardware tutorials|Networking hardware tutorials]] pages for further info.
  171. Watchguard Firebox II (9,880 bytes)
    6: ... familiar with the Watchguard Firebox II. This guide has been put together with hands-on experience wi...
    12: ...ed, and Wi-Fi or Ethernet PCI cards can also be added. Just make sure that they are of a low profile a...
    20: ...d you will need to limit the number of drive cylinders to 4092 by using the drive jumpers. This is due...
    27: ...olts fans. They will run slower, but they do provide enough airflow for the CPU and components to stay...
    35: ...r switch) that does not support MDIX or auto MDIX detection, you will need to use a [http://en.wikiped...
  172. Netgear R6400v1 (2,598 bytes)
    5: ==Hardware [http://techinfodepot.shoutwiki.com/wiki/Netgear_R6400_v1 Specs]==
    6: The hardware is almost identical to a Netgear R6300v2, but has external ante...
    7: {| border="1" cellspacing="0"
    43: ...lds may also be used. (K3-AC-ARM folder). See [[Index:FAQ#Where_do_I_download_firmware.3F|Where do I d...
    46: *Use the webupgrade file to upgrade to a newer version of dd-wrt.
  173. Netgear R7000P (2,672 bytes)
    1: ==Hardware [http://techinfodepot.shoutwiki.com/wiki/Netgear_R7000P Specificatio...
    2: {| border="1" cellspacing="0"
    49: |4-pin header, internal, 3.3V TTL
    54: ...30/30 reset ARM routers!''' Use the GUI ''Factory Defaults'' reset.
    57: ...k (r39267+)<br> ''or dd-wrt.K3_R7000P.chk <Kong> (deprecated)''
  174. Asus RT-AC56U (3,895 bytes)
    1: =[https://wikidevi.com/wiki/ASUS_RT-AC56U Hardware] Specifications=
    17: ===[https://wikidevi.com/wiki/ASUS_RT-AC56S RT-AC56S]===
    18: ...There is no evidence that it is supported at all, despite the FCC ID being listed as MSQ-RTAC56UA (CPU...
    22: ...this isn't a recommendation. New build links: [[Index:FAQ#Where_do_I_download_firmware.3F|here]].<br>
    23: ...20Models supports] the AC56U: [http://www.desipro.de/ddwrt/K3-AC-Arm/ dd-wrt.v24-K3_AC_ARM_STD.bin]
  175. Repeater Bridge/fr (12,531 bytes)
    3: ==Repeteur Mode pont==
    4: ...AU : depuis la V24, le routeur secondaire accepte des connexions à fil ET sans fil.
    6: ...nt sans devoir tirer un câble ethernet entre ces deux locaux.
    8: ...ents connectés par câble. Depuis la version V24 de DD-WRT, les clients peuvent se connecter indiffé...
    13: ... fil) au routeur sans fil primaire (ou à la box) de n'importe quelle marque.
  176. Repeteur sans fil (12,493 bytes)
    1: ...AU : depuis la V24, le routeur secondaire accepte des connexions à fil ET sans fil.
    3: ...nt sans devoir tirer un câble ethernet entre ces deux locaux.
    5: ...par câble ethernet. Dans la nouvelle version V24 de DD-WRT, les clients peuvent se connecter indiffé...
    10: ... fil) au routeur sans fil primaire (ou à la box) de n'importe quelle marque.
    15: ...uré dans un sous-réseau 192.168.1.X et attribue des adresses DHCP dans ce même sous-réseau.
  177. Linksys WRT600N (4,396 bytes)
    3: ====Hardware Specs====
    4: [https://wikidevi.wi-cat.ru/Linksys_WRT600N_v1.0 WRT600N v1.0]: F...
    5: [https://wikidevi.wi-cat.ru/Linksys_WRT600N_v1.1 WRT600N v1.1]: F...
    40: ...l flash, a trailed build is required which has header information required by the Linksys firmware.
    42: #Reset to factory defaults
  178. Asus WL-520GU (18,825 bytes)
    8: ...ng|Xbox-KAID]] have been removed in order to provide sufficient space for the USB drivers/modules and ...
    10: ...th certain applications; albeit those mainly include resource intensive Optware programs like Bittorre...
    15: ...ead] about a clock timing bug that affects this model.
    19: ...asus.com/download/download.aspx?SLanguage=en-us&model=WL-520GU ASUS Firmware Restoration Utility]
    20: ...reless router utility program" and is available under "Utilities"
  179. Linksys WAP54G (10,094 bytes)
    1: [[Linksys WAP54G Hardware Spec]]
    6: ...tructions to assist you with creating a DD-WRT-loaded WAP unit. LOAD AT YOUR OWN RISK.</div>
    8: Hard reset does not work on this device, so it is not possible to clear NVRAM using t...
    26: ...ou do a hard reset (like when doing firmware upgrades).
    50: ... will have its own MAC addresses permanently embedded and will show every time you boot.
  180. LaFoneraPlus Software Flashing (10,090 bytes)
    17: ...dd-wrt I throw at it. I don't know if it's due to hardware or that it's less supported than my fon2100a/b/c ...
    28: .... your router, switch, hub, whatnot firmware upgrade or backup, or configuration backup and restore))'...
    29: ...run it, click the Browse button and select the folder containing the rootfs and vmlinux files from abo...
    40: ...te: the above instructions only seem to work on older OS X installations. If you're having trouble wit...
    72: ...erver is configured to do this as some are not by default.
  181. X86 (8,329 bytes)
    3: ...lso existing very small low power industrial embedded PC plattforms e.g. the very popular [[PC-Engines...
    19: === More Storage on your Boot Device ===
    23: Partition 3 is mounted Read-Only at boot by default.<br>
    27: /dev/discs/disc1/part3 on /usr/local type ext2 (ro)
    31: > mount -o remount /dev/discs/disc0/part3 /usr/local
  182. Netgear WGR614 v8.0 & WGR614L (7,509 bytes)
    5: ...geably. Please note that to load firmware on this device it must be first recompiled in Linux! If you ...
    12: ...builds if you like. The 'NoKaid' build is recommended.
    15: ...com. Flash from web interface. Reset to factory defaults after flashing and then reboot it again jus...
    17: ...and it crashes after a few reboots. This process defaults the machine and you are back to your curren...
    19: '''Basic Guide to Flashing (Must Use .CHK Version of The Firmwar...
  183. Linksys WRT54GL (7,215 bytes)
    2: <font color=red><b>To find other WRT54* model wiki pages see [[Linksys_WRT54G/GL/GS/GX|here]]....
    6: =Hardware [https://wikidevi.com/wiki/Linksys_WRT54GL_v1.1 Specifications]=
    10: **Use `cat /proc/cpuinfo` to verify BogoMIPS. Default output:
    14: cpu model : BCM3302 V0.8
    21: **NOTE: (26 Sep 2009) Non-removable molded antennas may have been used in the past a year o...
  184. Switch (3,590 bytes)
    6: ...switch. A switch is similar to a hub in that all devices connected to it will be in the same broadcas...
    8: The configuration is nearly identical to that of a [[Wireless Access Point]]. Th...
    11: #[[Hard reset or 30/30/30]] the router to dd-wrt default settings
    27: #*Operating Mode : Router
    30: #*''(Optional)'' Wireless Network Mode : Disabled*
  185. Netgear WAG 102 (7,486 bytes)
    6: ==Hardware==
    34: n netif - print network interface device address<br>
    35: $dev(0,procnum)host:/file h=# e=# b=# g=# u=usr [pw=p...
    36: boot device: tffs=drive,removable file name: /tffs0/v...
    45: available boot devices: Enhanced Network Devices ae0 tffs
  186. Antenna mods (254 bytes)
    2: ...movable antennas (and other earlier models w/non-detachables)]]
    5: [[Category:Hardware]]
  187. Accton Software Flashing (14,547 bytes)
    6: ==Hardware==
    24: ...ur Windows machine (it's a simple no-installer-needed HTTP server). If the link does not work, try [ht...
    25: ...g" pane of System Preferences. Use the "Sites" folder in your home directory to serve files.
    28: .... your router, switch, hub, whatnot firmware upgrade or backup, or configuration backup and restore))'...
    29: ...run it, click the Browse button and select the folder containing the rootfs and vmlinux files from abo...
  188. SENAO EOC-2610 (2,810 bytes)
    11: =Hardware=
    13: *Ubiquity Nanostation2 clone with better hardware.
    25: ...hat the correct state of the settings is REV dependent.
    32: ... not. If you can set it to secondary and push the hardware switch to ext. Now the rp-sma plug is active
    35: To over come this you can solder RP-SMA connectors onto the internal plugs.
  189. Bonding (4,814 bytes)
    10: ...escription to setup a sample p2p-bridge with 2 bonded interfaces. <br>
    11: You can use this guide to see how to do the right settings.<br>
    18: ===1st device (AP)===
    20: *Under "Create Bridge" create 2 bridge devices and call them e.g. br1 and br2 (dont use a e...
    21: *Under "Assign to Bridge" add each of your 2 wlan inter...
  190. Buffalo N450 (831 bytes)
    1: == Hardware Information ==
    5: {| border="1" cellspacing="0"
    33: This devices comes with DD-WRT 20025 Buffalo branded preinstalled and the Buffalo User-Friendly Firmw...
    35: ...are you need to set the nvram variable bver_override to 1
    37: See [[Index:FAQ#Where_do_I_download_firmware.3F|Where do I d...
  191. Linksys WRT350N (2,519 bytes)
    1: ...r version of the WRT350N. '''Only''' [https://wikidevi.com/wiki/Linksys_WRT350N_v1 V1] is supported, '...
    3: ===Hardware===
    16: Flashing a virgin WRT350N with the default Linksys firmware will require a special "tra...
    20: # Download the trailed build, with the model in file name: [ftp://ftp.dd-wrt.com/betas/08-12-...
    25: ...he "administration" tab. Click on "firmware upgrade".
  192. Advanced wireless settings/ja (51,292 bytes)
    20: ...entication. For Shared Key authentication, the sender and recipient use a WEP key for authentication. ...
    26: The following steps occur when two devices use Shared Key Authentication: # The client ...
    28: ... The client uses its configured 64-bit or 128-bit default key to encrypt the challenge text, and it se...
    29: ...ted text with the original challenge text. If the decrypted text matches the original challenge text, ...
    34: If the decrypted text does not match the original challenge...
  193. Upgrade from openwrt (743 bytes)
    1: ...ys WRT54GS version 2 router that I wanted to upgrade from openwrt to dd-wrt.
    2: ...o I created this page just in case anyone else needed to do this.
    19: ...aults after the reboot, I am not sure if it is needed or not.
    23: [[Category:Flashing networking hardware]]
  194. Triggertftp (1,465 bytes)
    2: ...e use of an intermediate switch is highly recommended
    32: atftp --option "mode octet" --option "timeout 60" --verbose --trace -...
    33: # waiting longer than needed x2
    41: # hardcoded
    43: ip addr del $CURRENT_IP dev $INTERFACE
  195. Actiontec MI424WR (12,063 bytes)
    18: Since the stock ROM and Jungo loader will not allow us to upload the DD-WRT directly,...
    21: ...o-image.py] that will interface with the Jungo Loader to perform backup of the orig flash content and ...
    24: ... "mi424wr" in the input search field. Select the desired linux.bin and place it in your TFTP server.
    25: # At this point you have downloaded all the files you need to and Internet connectio...
    26: # Reset the router to factory default by holding down the reset button for 10 seco...
  196. 其它 (969 bytes)
    5: ...rms and DD-WRT features with definitions and considerable explanations. A great place for reference an...
    8: ==Device-Specific Information==
    9: There are some pages that describe specific hardware with only loose
    20: * [[Hardware#NVRAM|NVRAM]]
    22: * [[Hardware#Overclocking|路由器超频]]
  197. D-Link DIR-300 rev A (6,603 bytes)
    14: ...I download firmware?]] for links to files to upgrade firmware.
    16: ...ayer, modified by Sash, v24_SP1 specific added by Deepak)
    25: When you succeed you will be rewarded with a RedBoot> prompt.
    29: Default server: 192.168.20.80<br>
    36: ...). It will be waiting for connection at the LAN side of the router, so follow the instructions that fo...
  198. PXE (2,146 bytes)
    2: ...ww.igel.com/ IGEL], [http://www.wyse.com/products/hardware/thinclients/ WYSE] , [DisklessWorkstations.com], ...
    4: ... They provide significant power savings, extended hardware replacement intervals, and centralized management...
    7: ...ge the reliability and simplicity of embedded WRT devices over running DHCP services from full blown W...
    17: Add the following under Services->Additional DNSMasq Options
    22: == Further Considerations ==
  199. Linksys RV042 (2,356 bytes)
    7: =Hardware=
    13: 1 serial port (unsoldered)<br>
    14: 1 jtag port (unsoldered)<br>
    15: 1 mPCI port (unsoldered)<br>
    23: Hardware : Intel IXP425 IXDP425<br>
  200. Configure Samba in Linux (2,749 bytes)
    8: sudo aptitude install samba
    10: On Debian (as root):
    11: aptitude install samba
    21: First do a backup of the default configuration:
    47: In Debian (as root):
  201. Overclocking (1,155 bytes)
    1: '''OVERCLOCKING CAN BRICK OR PHYSICALY DESTROY YOUR ROUTER! '''
    20: in order to keep the high speeds after a reboot. See foru...
    40: [[Category:Networking hardware]]
  202. Antenna adjusting (1,007 bytes)
    3: In this guide i show u how to adjust p2p or p2mp antenna system...
    11: ...re incompatible. The commands below disable AP mode for the survey and return it to what it was befor...
    14: [[Category: Hardware]]
    33: [[Category:Hardware]]
  203. Mobile Broadband (144,496 bytes)
    2: ...t UMTS 3G / 3.xG / 4G/ LTE and CDMA2000(EV-DO) modems connected via the USB port or as mPCIe cards.
    12: ...t for other direct ethernet protocols may be included in the future for routers with at least 16MB fla...
    14: =Non-Working Modems=
    16: ...ct the developers via the community forum if your device is not working '''AFTER''' you have installed...
    20: '''cat /sys/kernel/debug/usb/devices'''
  204. Asus TFTP Flash (17,505 bytes)
    1: ... WL-500 series a few extra steps are available/needed when you do the initial flashing of your Asus WL...
    3: ... this Asus specific TFTP Flashing page has been made.
    15: :: tftp client is enabled in the default installation of WinXP
    22: ::Quick user guide:
    29: ...32.jounin.net/tftpd32_download.html Tftpd32] includes TFTP client as well as DHCP, TFTP, SNTP and Sysl...
  205. Verizon FIOS setup Walkaround (1,566 bytes)
    7: ...68.1.1 . Enter the or your Username and Password (defaults: admin and password/password1).
    11: 3.- Now configure your dd-wrt router into AP mode and change the IP address from 192.168.1.1 to for...
    17: ... in your Verizon AT router you still just use the default IP address 192.168.1.1 .
    19: ... read this Tutorial, http://www.dd-wrt.com/wiki/index.php/Verizon_FIOS_setup_with_dd-wrt_as_primary_ro...
    21: [[Category:Networking hardware]]
  206. Verizon FIOS setup Walkaround with Coax cable (MoCA) (2,096 bytes)
    10: ...8.1.1 . Enter the or your Username and Password (defaults: admin and password/password1).
    14: 3.- Now configure your dd-wrt router into AP mode and change the IP address from 192.168.1.1 to for...
    25: ... in your Verizon AT router you still just use the default IP address 192.168.1.1 .
    27: ...read this Tutorial, http://www.dd-wrt.com/wiki/index.php/Verizon_FIOS_setup_with_dd-wrt_as_primary_ro...
    29: [[Category:Networking hardware]]
  207. Linksys WRV54G (9,537 bytes)
    7: * There is no way of backing up the bootloader or firmware (exept via jtag) so flashing RedBoot...
    12: ...l console. So you will have to add appropriate headers to the boar and get yourself ttl serial level s...
    13: ...ftp server and place the redboot into the root folder.
    23: Fill in the needed values, e.g.:
    36: Default server IP address:
  208. Asterisk (2,095 bytes)
    1: ... telephony equipment using relatively inexpensive hardware.
    3: Originally this page was started to describe a method of manually installing Asterisk, a...
    5: ... much better ways to have Asterisk running well under dd-wrt, along with many other tools, in a comple...
    8: ...s, I decided to remove the clumsy description I made, and to point you in the right direction:
    11: ...are, the Right Way: [http://www.dd-wrt.com/wiki/index.php/Optware%2C_the_Right_Way Wiki] [http://ww...
  209. Power Supply Info (2,285 bytes)
    2: ...with a .5 to 1.5 amp switching power supply way under what you need .
    13: 5v @ 2.4w = 0.48 amp just under 1/2 amp.
    23: Remember the variation that is needed; normally 5% to 10%
    25: Power needed just for this item at minimum so far:
    33: ...com/phpBB2/viewtopic.php?t=54242&postdays=0&postorder=asc&start=0 DD-Wrt Forum]
  210. Corerev List (3,597 bytes)
    3: ....6 wireless driver has stripped out support for older (less than 16) corerevs to keep the driver from ...
    5: ==Getting the Corerev of various models==
    20: ...ection here and add it....do not duplicate your model if it already exists in this list.
    28: WL500G Deluxe / wl0=5
    84: =Dell=
  211. StarOS (2,648 bytes)
    4: ... DD-WRT since you need the original vendor bootloaders.
    32: ft2232_device_desc "Olimex OpenOCD JTAG"
    37: jtag_nsrst_delay 200
    38: jtag_ntrst_delay 200
    49: # set big endian mode
  212. Insufficient ram (4,134 bytes)
    4: ...ily run out of ram and can enable any of the included features.
    6: ...the router to use ram that it normally wouldn't under low load. The router may only become 'slow' over...
    14: *Go to the Web Interface of the DD-WRT Device and log in
    27: *Disable any decentralized systems (DHT, Kademlia and such). They make too many connections and...
    30: *If you have patched your tcpip.sys in order to be able to make more than 10 connections per ...
  213. D-Link DIR-320 64 Mb RAM Upgrade (1,761 bytes)
    1: {{Languages|D-Link_DIR-320_64_Mb_RAM_Upgrade}}
    3: ...ou brick your router. If you don't have skills on hardware modding and SMD rework I don't recomend to perfor...
    11: To do this you need skills to solder and rework SMD componets and the correct equipme...
    34: [[Category:D-Link guides]]
  214. NEWD2 Support on some models (2,697 bytes)
    5: ... that NEWD2 will or won't work for a particular model, please update this article.
    8: ...ered routers only...Micro can run on some other models, however, it's not advised.
    10: ...witch and will cause an endless reboot loop if loaded.
    13: If your router model is not in the list...it has not been tested.
    15: ....you've been warned...JTAG (or Serial) will be needed to recover if it won't work.'''
  215. Useful tools for the WiFi Network (11,758 bytes)
    4: ...allations up to complex networks with hundreds of devices.
    21: ...he traffic details you need and present them in a detailed graphical view.
    23: ...aved and reused at a later date. The information derived from capturing NetFlow is incredibly helpful...
    34: ...s, generating network traffic reports that help understand the nature of the network traffic and the b...
    36: ...n etc, helps a network administrator to gain an indepth visibility into the network traffic. More use ...
  216. D-Link DIR-330 (24,059 bytes)
    6: ==[https://wikidevi.wi-cat.ru/D-Link_DIR-330 Hardware] Specifications==
    7: {| border="1" cellspacing="0"
    35: ...Because that router is such a different animal, I deleted all references to it to avoid confusion. Th...
    36: ...at really should not be a suprise to anyone who understands OSs and how they are built. I chose the Li...
    45: ...-09-r13525%2Fbroadcom%2F Click here] (not recommended, very old)<br>
  217. Linking Subnets with Static Routes (4,896 bytes)
    4: ... another router. I will avoid going into too much detail about subnetting in general, though I will sa...
    8: ...ort is unbridged while the LAN switch (which is a hardware bridge) and wireless interfaces are software brid...
    10: Ways to create additional subnets include:
    13: ...g interface which is poor design but can overcome hardware limitations such as switches without vlans.
    18: ... Router3 could also be using Client or Repeater mode (not bridged!).
  218. Linksys WRT54G v1.0 & 1.1 (6,312 bytes)
    7: ...d DD-WRT. The original firmware (Linksys v1.00.8 Dec 24 2002) gave a "incorrect image file" error on ...
    8: # Restore factory defaults with the original firmware.
    9: ...fully, as not all firmware versions work with all hardware versions.
    10: # Upgrade to DD-WRT v23sp2_mini_generic. I got the ''Conti...
    12: ...Then I got the DD_WRT GUI. I reset it to factory defaults with the GUI, although this step may have b...
  219. Linksys WRT54G-RG (2,910 bytes)
    1: ...WRT54G-TM and WRT54G-RG are identical in terms of hardware, but not firmware. You MUST USE THE CORRECT firm...
    12: # Go to administration, firmware upgrade
    13: ... you downloaded in the first step) and click upgrade.
    18: ...24-12548_NEWD_mini.bin that you previously downloaded.
    19: # Hit upgrade.
  220. Xbee (4,930 bytes)
    3: ... feet and cost around $20, however, you can upgrade the radios and there are some that go 1 mile(http...
    7: 2 Xbee radios(http://www.adafruit.com/index.php?main_page=product_info&cPath=29&products_id=...
    9: 2 Xbee carrier boards(http://www.adafruit.com/index.php?main_page=product_info&cPath=29&products_id=...
    11: 1 USB FTDI cable(http://www.adafruit.com/index.php?main_page=product_info&cPath=29&products_id=...
    15: ...ure the radios(http://www.digi.com/support/productdetl.jsp?pid=3352&osvid=57&tp=5&s=316)
  221. D-Link DIR-600vB / 300vB (9,032 bytes)
    6: ...[https://wikidevi.wi-cat.ru/D-Link_DIR-300_rev_B1 Hardware] Specifications==
    7: {| border="1" cellspacing="0"
    31: ...IR-300 Rev A1 and Rev B1 are completely different hardware, different SoC, different procedure. So, if you h...
    33: ...self. This means it's quick and easy to check the hardware revision before buying or borrowing it.
    35: The factory default IP for this router is 192.168.0.1, user is "...
  222. Micro Redboot (3,960 bytes)
    6: ... AR7100 (in progress). Support for more reference designs to come.
    8: ==Details==
    10: ...se targets), a built in TFTP-Server (like in UBNT devices) for easy flashing with dd-wrt webflash imag...
    15: =Supported hardware=
    27: ...'s for implementation and you have to contact the dev´s.
  223. Linksys WRT54G2 v1.3 & WRT54GS2 v1.0 (5,285 bytes)
    5: ...his advancement. LOM cracked the code that was needed for this breakthrough and proved his genius. Gre...
    7: ==Hardware==
    8: ...s_WRT54G2_v1.3 Linksys WRT54G2v1.3], [https://wikidevi.com/wiki/Linksys_WRT54GS2 Linksys WRT54GS2v1]
    12: Unlike most WRT54* models, the BCM5354 clock is locked and cannot be over...
    25: #Use the firmware upgrade dialog to flash [ftp://ftp.dd-wrt.com/others/eko/...
  224. Wireless-N Configuration (13,269 bytes)
    3: ...ally affect performance and there still isn't any hardware commonly available capable of supporting the maxi...
    5: ...%5D=41 here] or also commonly found listed in the device's technical specs.
    7: .... The same applies to client adapters. Check your device's documentation to find out what bands it is ...
    11: '''First read [https://www.dd-wrt.com/wiki/index.php/Basic_Wireless_Settings Basic Wireless Setti...
    14: ...ole WLAN to only use the main 20MHz channel if it detects anything using the additional 20MHz channel.
  225. Belkin F5D8235-4 v2000 (9,430 bytes)
    2: ...oad firmware?]] for links. Belkin-F5D8235-4_v2 folder.
    40: cpu model : MIPS 24K V4.12
    46: hardware watchpoint : yes
    53: usbcore: registered new device driver usb
    56: IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  226. Asus RT-N16 (18,355 bytes)
    1: =Hardware=
    7: ==[https://wikidevi.com/wiki/ASUS_RT-N16 Hardware] Specifications==
    8: {| border="1" cellspacing="0"
    33: |3 x external detachable 2dBi antennas
    53: ...'' in a terminal (like puTTY) to get the full CPU details.
  227. VLAN Detached Networks - Linksys E2500 (3,616 bytes)
    3: <table border="1">
    4: <tr><th>DD-WRT Port</th><th>Hardware/GUI Port</th></tr>
    13: === Default VLANs ===
    15: ...ble results. Also, there is an nvram variable wan_default set to vlan2. Modifying this variable has no...
    18: ...AN1. Bottom line, leave whatever ports your considering your LAN assigned to VLAN1 to keep yourself s...
  228. Multiple WLANs (14,425 bytes)
    4: ...work#Notes]]). Refer to this new howto for recent device/firmware.
    6: This guide teaches you how to broadcast multiple WLAN SSID's...
    12: ...guides on how to set up those interfaces, this guide will just tell you how to bridge it.
    14: ...or them. Keep your eye out for the places this guide gives alternative instructions for WAP's.
    16: ...flect the bridge creation changes until ''recommended builds'' are affected by the change.
  229. Linksys WRT320N v1.0 (5,706 bytes)
    3: Device forum thread, for more information: [http://w...
    5: ===[https://wikidevi.com/wiki/Linksys_WRT320N_v1 Hardware] Specs===
    17: ... hard reset doesn't work, and boot_wait is off by default. In DD-WRT, the reset button works, and boo...
    20: *For initial flash, a trailed build (with the model in the file name) is '''required''': [https://do...
    21: *After initial flash, upgrades can use any non-trailed generic (not nv60k nor n...
  230. OM1P config (1,528 bytes)
    5: ...vice every 5 minutes if it's not reset via a GPIO device.
    29: Then enable Cron under management and add this line
    30: Code:
    40: ...nk you have to do this every time you restart the device.
    49: # send heartbeat to the hardware watchdog
  231. Asus RT-N12 (12,946 bytes)
    16: =Hardware Specifications=
    18: ...t-align:center; position:relative; " width=50% border=1 cellspacing=0 class="wikitable"
    19: ...://wikidevi.wi-cat.ru/ASUS_RT-N12_series RT-N12 models]:
    42: ...it may enter an infinite reboot loop. Recovery mode may be possible to fix it.
    44: ===Recovery Mode===
  232. Hardware-specific (5,910 bytes)
    1: {{Languages|Hardware-specific}}
    3: ...y:Networking hardware tutorials]] and [[Supported_Devices]] for links to other pages and information t...
    7: =Hardware Brand=
    9: ...shing]] Page. (Use only the MR3202A binaries provided, instead of the Fonera ones).
    19: * [[Asus WL-500g Deluxe|Asus WL-500G Deluxe]]
  233. Linksys WTR54GS (572 bytes)
    5: ==Hardware v1==
    13: ==Hardware v2==
  234. Asus (230 bytes)
    1: ...Category:Networking hardware tutorials|Networking hardware tutorials]] pages for further info.
  235. MyPage (36,169 bytes)
    13: ... font-weight:bold;">This wiki page is currently under construction to reflect changes upcoming with Ve...
    14: ...r:#b40404; font-weight:bold;">Be careful and consider things written/showed here can differ from the c...
    15: ... font-weight:bold;">This info will be immediately deleted after the official announcement was posted i...
    18: ...lor:#b40404; font-weight:bold;">Thanks for your understanding and I apologize for any inconvenience ca...
    24: ...o have the most useful Linux command executed inside a web page, just click one of this tabs and be ha...
  236. Linksys WRT610N v2.0 (9,448 bytes)
    5: <code>Router ModelLinksys E3000<br>
    7: ....107 #16360 Fri Oct 20 11:07:53 CEST 2017 mips</code><br>
    11: '''The device hardware is identical to a [[Linksys_E3000]].'''<br>
    14: Further reading: WikiDevi page: [https://wikidevi.com/wiki/Linksys_WRT610N_v2]<br>
    17: ...se again, the hardware is the same in the later model E3000 as the WRT610Nv2
  237. Netgear (236 bytes)
    1: ...Category:Networking hardware tutorials|Networking hardware tutorials]] pages for further info.
  238. Ubiquiti Litestation 2 (LS2/LS5/PS2/PS5/NS2/NS5/LSX) (1,705 bytes)
    12: ...mportant to ensure that the latest RedBoot bootloader is installed.
    13: ##Power off the device and power it on again while holding the reset...
    14: ...dd-wrt.bin using tftp to 192.168.1.20 in binary mode
    20: ...blinking in different colors during firmware upgrade.
    34: [[Category:Networking hardware tutorials]]
  239. Netgear WNDR3300 (18,349 bytes)
    3: == Hardware [https://wikidevi.com/wiki/Netgear_WNDR3300v1 Specifications]==
    20: Flash device: 0x400000 at 0x1c000000
    36: ...nwrtdocs/hardware/netgear/wndr3300 OpenWRT wiki]: detailed information
    42: ... use 14929 or later k2.4 builds (''broadcom/'' folder). Build download links are found in the [[Firmw...
    56: ... mean the refurb unit you bought from a link on a deal site is bad. Please review potential sections ...
  240. Ubiquiti (818 bytes)
    2: ...t=51486], use this page to identify your router model correctly, and use the dd-wrt download search pa...
    6: ...: [[Supported_Devices#Ubiquiti|Ubiquiti Supported Devices]]
    8: [[Category:Networking hardware tutorials]]
    9: [[Category:Hardware]]
  241. ASUS RT-G32 (9,327 bytes)
    2: This is a step by step guide to flashing dd-wrt onto an ASUS RT-G32.
    4: Hardware: ASUS RT-G32 (this is not the Rev B version!)
    11: ...[http://support.asus.com/download/download.aspx?model=RT-G32&os=17&SLanguage=en-us ASUS firmware]. I u...
    12: ...[http://support.asus.com/download/download.aspx?model=RT-G32&os=17&SLanguage=en-us ASUS Firmware Resto...
    13: * Network settings needed for ASUS flashing tool.
  242. Overclocking BCM 47xx CPU's (7,179 bytes)
    1: Provided by LiteUp!
    6: ...are all of the possible combinations via source code:
    10: Code: /* 20MHz table for 4716, 4717, 4718, ...
    83: ...set sends you back to the default settings hard-coded in the CFE of 354,177,88 (you can see this near ...
    94: .... I have viewed their CFEs and seen this as their default operating frequencies.
  243. Configuring for Xbox 360 (4,308 bytes)
    8: Since the 360 is a UPnP compliant device, we can take advantage of the UPnP functional...
    21: ...arding, which is more difficult to do but is considered safer than using UPnP, since you control what ...
    37: ...rk test with your Xbox 360. If it still shows a moderate/closed NAT, you may have to repeat these step...
    40: ...* 80 TCP only - in rare cases, most likely not needed
    55: # In the drop down box under "Service Name", scroll down until you reach "xbo...
  244. Netgear R6400v2 (2,478 bytes)
    5: ==Hardware [http://techinfodepot.shoutwiki.com/wiki/Netgear_R6400_v2 Specs]==
    6: {| border="1" cellspacing="0"
    42: ...he webflash.bin file for DD-WRT upgrades. See [[Index:FAQ#Where_do_I_download_firmware.3F|Where do I d...
    51: ...?t=316399 Netgear R6400 v2 and R6700v3 Install Guide]
    53: ====Debricking====
  245. Netgear R6700v3 (5,388 bytes)
    5: =Hardware Specs=
    7: {| border="1" cellspacing="0"
    41: Nearly identical to Netgear R6400v2 but with the following c...
    42: * Reduce the Heatspreader's size from 226x127 to 196x90.
    47: ...'''netgear-r6700v3''' folder under the release folder.
  246. Netgear AC1450 (2,333 bytes)
    3: ==Hardware Specs==
    5: {| border="1" cellspacing="0"
    41: ...50 hardware has the same FCC ID as the v2. Kong added support for it (build 25139), use the ''netgear-...
    48: See [[Index:FAQ#Where_do_I_download_firmware.3F|Where do I d...
    50: ==DO NOT 30-30-30 Reset ARM Devices==
  247. Buffalo WZR-HP-G300NH (14,503 bytes)
    6: {| border="1" cellspacing="0"
    42: Buffalo provides a re-branded version of DD-WRT specifically for this router. ...
    50: ...the issue that VLAN is turned on automatically by default, which makes clients unable to communicate w...
    52: ...described here and can be fixed by startup script described in post 24 & 25.
    53: http://forums.buffalotech.com/index.php?topic=15378.15
  248. Что такое DD-WRT? (41,715 bytes)
    7: ..., которые были [http://forum.bsr-clan.de/ftopic4612.html использованы] BrainSl...
    18: .../GL/GS роутер или любой [[Supported Devices|поддерживаемый]] маршру...
    29: ...Glossary#Client Isolation Mode|Client Isolation Mode]]
    30: *[[Glossary#Client Mode|Client Mode]] (supports multiple connected clients)
    31: *[[Glossary#DHCP Forwarder|DHCP Forwarder]] ([http://udhcp.busybox.net/ udhcp])
  249. OpenVPN Router to Router Bridged Configuration Alternative (Hardware VPN) (5,716 bytes)
    1: ...uter to Router Bridged Configuration Alternative (Hardware VPN) ===
    2: (for hardware "like" vpn access for multiple computers or appli...
    4: This is a quick and dirty guide to creating a VPN between (2) DD-WRT v24 SP2 rout...
    6: ...ccess on the client side to more than one client, device, and or appliance that does NOT have built in...
    8: '''Examples Include:'''
  250. Asus WL-500g Premium V2 (13,166 bytes)
    3: [[Asus WL500-- old descriptions#Asus WL500G Premium V2|"Old" wiki about...
    7: ... what has been added for other router makes and models. It would probably be relevant to merge any ex...
    9: ===Details on version 1===
    10: http://oleg.wl500g.info/devices.html
    13: ...ead] about a clock timing bug that affects this model.

View (previous 250) (next 250) (20 | 50 | 100 | 250 | 500).



Search in namespaces:

List redirects
Search for