Search results

From DD-WRT Wiki

You searched for Firmware_FAQ/se

Jump to: navigation, search

For more information about searching DD-WRT Wiki, see Help.

Showing below up to 50 results starting with #1.


View (previous 50) (next 50) (20 | 50 | 100 | 250 | 500).

No page title matches

Page text matches

  1. Asus WL-500g Deluxe (2,713 bytes)
    2: For initial flash see [[All Asus WL-500xx series routers]]
    9: ...e generic files in the ''broadcom'' folder. See [[Firmware_FAQ#Which_router_should_I_buy.3F|Where do I download ...
    10: ...use the red 'EZ Setup' button with the RECESSED reset button.'''
    11: ...to the computer (disable wireless) with nothing else connected to either device.
    12: #Set the computer to a static IP address of 192.168.1...
  2. Netgear WNR3500L (4,176 bytes)
    2: ...essfully flashed, but always exercise caution!<br>See [[#K3X builds|K3X Builds]] for more information.
    5: Read the [[Firmware_FAQ|Firmware FAQ]] and [http://www.dd-wrt.com/phpBB2/...
    9: For build information and much more, see [[Index:FAQ#Which_router_should_I_buy.3F|Where d...
    17: ...3500L requires K2.6 builds of DD-WRT (''Update:'' see "K3X builds")
    19: ...nce running DD-WRT, the '''.bin''' builds can be used
  3. Station Bridge (Routed) (4,967 bytes)
    9: ...onnection problems for more than a single client. See [[Linking Routers]] for a description of each of...
    11: ...s a wired LAN using a wireless connection, as opposed to an [[Wireless_Access_Point|Access Point]] tha...
    12: ....</font>''' The other radio(s) would normally be set as ''AP''. For example, the 2.4GHz radio can be...
    14: ...st in the list of wireless modes. In this case, use [[Repeater Bridge]] - which provides a bridge to ...
    16: ...outers will be at 192.168.1.1, so use something else not in the DHCP range.
  4. Installation (20,950 bytes)
    2: Installing DD-WRT on a router in most cases is almost as simple as installing a program onto...
    7: ...-wrt.com/support/router-database/ '''router database'''] first.
    11: For a list of devices working with DD-WRT, please see '''[[Supported Devices]]'''.
    13: ...t of devices '''not''' working with DD-WRT please see '''[[Known incompatible devices]]'''.
    15: ...k_%28electronics%29 Bricking] your router''', please finish reading this entire page first. You will ...
  5. Linksys WRT54G-TM (9,840 bytes)
    8: ...he CORRECT FILES MUST BE USED. The WRT54G-TM was used by T-Mobile while the WRT54G-RG was for Rogers i...
    12: **Refer to the [[Firmware_FAQ#Where_do_I_download_firmware.3F|Firmware FAQ]] an...
    18: <font color=red>'''*Research ''New Build'' forum threads for issues with t...
    20: ...etwork controller to speed up the process, otherwise once you upload the '''CFE_Updater-WRT54G-TM.bin'...
    22: ...ons/right-click on Local Area Connection icon and select Properties.
  6. Netgear WNDR4500 (3,670 bytes)
    69: ...Peacock announcement] for reference on Broadcom-based routers.<br>
    76: ... router, wait for Power light to go green, then reset router:<ol>
    77: ...eset switch with a straightened paper clip for 20 seconds.</li>
    78: <li>After releasing Reset switch, router should reboot with much flashing ...
    80: <li>Clear web browser cache.</li>
  7. D-Link DIR-615 rev C (10,866 bytes)
    6: ...rsion is also stuck on the bottom of the router itself. This means it's quick and easy to check the ha...
    8: ...ctory default IP for this router is 192.168.0.1, user is "admin", password is blank.
    11: * 4 MB board, so no need to use "micro" DD-WRT builds.
    13: ...sed in 2009?), so it's widely available for purchase new.
    18: ...o cannot be a NAS for a USB drive, nor can it be used for [[Printer Sharing]] of a USB printer.
  8. Supported Devices (240,439 bytes)
    6: '''DO NOT TRUST THIS LIST, NOR THE ROUTER DATABASE, TO HAVE THE MOST UP-TO-DATE INFORMATION!'''
    8: ...really bad builds for your router hardware and cause a lot of issues.
    10: '''Always use the newest beta build first, then work your way b...
    12: ...e following links on the "beta" FTP/HTTPS site to see if you can find your hardware.
    13: ...he Forums] to read about specific beta builds and see how they work for a particular piece of router h...
  9. Wlan Repeater (9,003 bytes)
    13: ...ur host-router / AP except that you usually must use WPA2-AES ONLY for dd-wrt to work. Also, some ot...
    19: *the security settings
    21: ...E THE ROUTER DATABASE, IT IS NOT UPDATED. SEE: [[Firmware_FAQ#Which_router_should_I_buy.3F|Where do I download ...
    24: *do a 30 sec reset (see [[Hard reset or 30/30/30]]).
    25: *verify which chip set your device uses and read Broadcom / Artheros considerations, bel...
  10. 安装 (16,952 bytes)
    13: ...nd not create a problem that renders your router useless.
    15: ..., the [[Hardware-specific]] page may be the most useful page for you in terms of identifying your rout...
    18: ... just going by what model you think you have - [[User:Clock|clock]].
    19: ...t may indicate how many files you need, etc (- [[User:Clock|clock]]).
    20: ... DD-WRT version for your device. You may need to use an SVN or experimental build.
  11. Linksys E2100L (2,608 bytes)
    45: ...o into the Linksys stock firmware and choose to reset to defaults.
    46: #Once that is finished, set a static IP on your machine to 192.168.1.6 with ...
    48: #Select the file linked above and then begin the flas...
    49: ...o http://192.168.1.1 it should want you to set a user/password, do so.
    51: ...re Factory Defaults" This will effectively hard reset the router and ensure integrity of the flash.
  12. Linksys E800 (3,220 bytes)
    37: *Never use a build older than 21676, as E800 support was add...
    39: '''CAUTION: To avoid bricking, only use a trailed build (the file with the router name) f...
    40: ...inksys E-Series units use nv60k builds, the E800 uses nv64k builds.
    41: *See: [[Firmware_FAQ##Which_router_should_I_buy.3F|Where do I download...
    46: ....php/Hard_reset_or_30/30/30 Hard reset] (or GUI reset) the router
  13. 简体中文 (1,977 bytes)
    11: |'''[[Firmware_FAQ/zh_cn|FAQ]]''' <br/> 常见问题解答
    41: __NOEDITSECTION__
  14. Buffalo (19,760 bytes)
    2: ...o identify your router model correctly, and see [[Firmware_FAQ#Where_do_I_download_firmware.3F|Where do I downlo...
    6: '''NOTE:''' For some models you can use the [[ddadder]] program.
    9: The web interface on a Buffalo router cannot be used the very first time to convert the Buffalo route...
    11: It is very easy to bypass this on most models (see specific models below for exceptions):
    14: ...n] or the latest NEWD (NOT NEWD2 or K26) SVN release that is recommended in the broadcom forum announc...
  15. Linksys E900 (3,213 bytes)
    37: *Never use a build older than 18946, as E900 support was add...
    39: '''CAUTION: To avoid bricking, only use a trailed build (the file with the router name) f...
    40: ...inksys E-Series units use nv60k builds, the E900 uses nv64k builds.
    41: *See: [[Firmware_FAQ##Which_router_should_I_buy.3F|Where do I download...
    46: ....php/Hard_reset_or_30/30/30 Hard reset] (or GUI reset) the router
  16. Linksys WRT1900AC (7,260 bytes)
    2: These instructions have only been tested on the [https:...
    4: ...200ACM] and other versions are so similar that these instructions will probably also apply to the othe...
    8: #See [[Firmware_FAQ#Where_do_I_download_firmware.3F|Where do I downlo...
    20: To see historically available packages, see [[What_is_DD-WRT%3F#File_Versions|File Versions]...
    22: =Setup=
  17. Netgear R7000P (2,672 bytes)
    48: !Serial
    54: ...RM routers!''' Use the GUI ''Factory Defaults'' reset.
    55: *'''DO NOT USE THE ROUTER DATABASE!'''
    56: *Use builds in the ''netgear-r7000P'' directory (some ...
    57: *Initial flash: GUI reset then flash factory-to-dd-wrt.chk (r39267+)<br> '...
  18. Linksys WRT600N (4,396 bytes)
    36: ====Reset====
    37: ...re to do a proper [[Hard reset or 30/30/30|hard reset]] before and after updating the firmware. This i...
    42: #Reset to factory defaults
    44: #Reset again after flashing
    46: ...com'' folder non-micro build under 7872 KB (see [[Firmware_FAQ#Where_do_I_download_firmware.3F|''Where do I down...
  19. Hard reset or 30/30/30 (5,274 bytes)
    1: {{Languages|Hard_reset_or_30/30/30}}
    9: ...upgrade is complete and the router has rebooted itself.</font>
    19: ... nvram on a Linksys EA series router as it may erase the CFE and brick your router<sup>[https://www.dd...
    29: ...#Hard_Reset_on_ARM_and_other_newer_routers|Hard Reset on ARM and other newer routers]].</font>
    36: ==30/30/30 reset==
  20. X86 (8,329 bytes)
    24: You can see this with the mount command:<br>
    38: ...ge it a little, if you're booting off something else.
    57: For example, we'll use: <br>
    76: ...der each release on the download server.<br>See [[Firmware_FAQ#Which_router_should_I_buy.3F | Where do I downloa...
    77: ...rite or an other utility that can write the image sectors directly to your IDE device. Linux/Unix has ...
  21. Linksys WRT54GL (7,215 bytes)
    2: ...olor=red><b>To find other WRT54* model wiki pages see [[Linksys_WRT54G/GL/GS/GX|here]].</b></font><br>
    10: **Use `cat /proc/cpuinfo` to verify BogoMIPS. Default ...
    21: ...009) Non-removable molded antennas may have been used in the past a year or two
    23: *'''Serial''' / '''JTAG''' / '''USB''': Yes / Yes / No
    27: '''See [[Firmware_FAQ#Where_do_I_download_firmware.3F|the DD-WRT FAQ]] ...
  22. Station Bridge (5,355 bytes)
    10: ...onnection problems for more than a single client. See [[Linking Routers]] for a description of each of...
    12: ...s a wired LAN using a wireless connection, as opposed to an [[Wireless_Access_Point|Access Point]] tha...
    13: ....</font>''' The other radio(s) would normally be set as ''AP''. For example, the 2.4GHz radio can a ...
    14: ...c.php?p=1128573#1128573 will usually crash] in these modes.
    16: ...outers will be at 192.168.1.1, so use something else not in the DHCP range.
  23. Linksys WRT150N & WRT160N (8,075 bytes)
    4: These have a 4.00 MB flash chip (0x400000 bytes) with s...
    13: #Use a wired connection to the router (disable any wir...
    14: #Perform a [[Hard_reset_or_30/30/30|hard]] reset.
    15: #Navigate to http://192.168.1.1/ in your web browser of choice.
    16: #Enter no username, and the password "admin".
  24. D-Link DIR-600vB / 300vB (9,032 bytes)
    31: ...0_rev_A| well documented elsewhere]]. Rev B1 is based on Ralink RT3050 SoC and from all accounts, incl...
    33: ...rsion is also stuck on the bottom of the router itself. This means it's quick and easy to check the ha...
    35: ...ctory default IP for this router is 192.168.0.1, user is "admin", password is blank.
    38: * 4 MB board, so no need to use "micro" DD-WRT builds.
    40: ...d amount were sold, they are fairly easy to find used.
  25. Linksys WRT320N v1.0 (5,706 bytes)
    8: *Flash/RAM: 8MB (serial) / 32MB
    17: ...s not work" for more info regarding how to hard reset this unit.'''
    21: *After initial flash, upgrades can use any non-trailed generic (not nv60k nor nv64k) K2....
    22: ...ini_wrt320n.bin), then from the Linksys webgui, reset to defaults.
    23: #Router default address is 192.168.1.1: Set your pc to a static IP e.g. 192.168.1.6 subnet 2...
  26. Asus RT-N12 (12,946 bytes)
    19: ...Supported [https://wikidevi.wi-cat.ru/ASUS_RT-N12_series RT-N12 models]:
    45: Hold the recessed reset (Restore) button for 20 sec (or until the power LED blinks '''slowly''') and...
    48: ...RAM on all models, hold the red WPS button for 20 seconds when applying power. '''Do NOT 30/30/30.'''
    52: ...al installation, newer DD-WRT builds can be used, see [[Index:FAQ#Where_do_I_download_firmware.3F|Wher...
    67: *If you have issues, try a different browser, restart it, or clear your cache
  27. Netgear WNDR3300 (18,349 bytes)
    17: *Serial / JTAG: yes / no
    33: ** Please search before starting a new thread for any support ...
    35: * [[Firmware_FAQ#Where_do_I_download_firmware.3F|Build and downloa...
    41: *Can I use NEWD or NEWD2 builds?
    42: ...folder). Build download links are found in the [[Firmware_FAQ#Where_do_I_download_firmware.3F|Firmware FAQ]].
  28. Linksys WRT400N (3,467 bytes)
    41: * See: [[Firmware_FAQ#Where_do_I_download_firmware.3F|Where do I downlo...
    44: #Do a [[Hard_reset_or_30/30/30|Hard reset or 30/30/30]] on the router
    45: #Set a static IP on your computer to 192.168.1.7. Sub...
    47: ...he router (uplug the power from the router for 30 seconds and then plug it back in)
    48: ... and NOT a page that says Management Mode. If you see management mode, power cycle the router again.
  29. Linksys E1000 (4,980 bytes)
    19: #*'''Do not use a build bigger than 3712 KB (3801088 bytes)'''
    21: # Set a static IP on your computer e.g. 192.168.1.7 an...
    24: # Perform a [[#Performing a Hard Reset|hard]] reset.
    26: ...g>not</strong> give the reboot command. You will use this page to upgrade your firmware.
    27: # Browse to the downloaded firmware and click Upload.
  30. Asus RT-N66U (15,667 bytes)
    18: |[http://www.broadcom.com/press/release.php?id=s474934 Broadcom BCM4331]
    21: |3x3 (both bands) (see [https://forum.dd-wrt.com/phpBB2/viewtopic.php?t...
    41: !Serial header
    47: ...:#ff0000">WARNING</span>:''' This 'Dark Night' presents significant risk to bricking that requires car...
    49: ... or Pale Moon. If you run into issues, clear browser cache or override with CTRL+F5<br>
  31. Buffalo WZR-D1800H (1,151 bytes)
    47: See [[Firmware_FAQ#Where_do_I_download_firmware.3F|Where do I downlo...
    49: ...ctice all the proper flashing procedures - hard resetting before and after flashing.
  32. Linksys E1200 (3,632 bytes)
    1: ...ge applies to version 1.'''</span> For version 2, see [[Linksys E1200v2]]
    42: ...unit with some other Linksys E-Series units that use nv60k builds!
    45: #Read the [[Firmware_FAQ]] and [http://www.dd-wrt.com/phpBB2/viewtopic.php...
    47: ...com/wiki/index.php/Hard_reset_or_30/30/30 hard] reset on router
    50: ...egrity, then power cycle the E1200 (unplug for 10 seconds).
  33. Installation/pt (13,927 bytes)
    3: ...entanto, uma instalação incorreta pode fazer de seu roteador um dispositivo inútil. A instalação ...
    4: ...rocesso de instalação é o correto para você e seu roteador suportado, bem como lhe dar sugestões ...
    8: ...rtigo está em processo de tradução, e encontra-se incompleto. Além disso, referências para outros...
    10: ...s of them. As time goes by, we hope to eventually see all of the pages translated. Meanwhile, enjoy wh...
    14: ==Seu Roteador É Suportado?==
  34. Netgear WNDR3700 (19,494 bytes)
    58: '''NOTE:''' Max TX Power assumes used regulatory domain is Canada/USA/Haiti. Others ma...
    62: '''NOTE:''' See [[Index:FAQ#Where_do_I_download_firmware.3F|Wher...
    66: ... in the ''netgear-wndr3700'' folder for each release.
    67: ...DR3700 '''v1''' depending on the region you purchased your router from:
    73: '''NOTE:''' Please search the new build threads / flash and report curr...
  35. D-Link DIR-615 rev D3 (4,639 bytes)
    3: ...rsion is also stuck on the bottom of the router itself. This means it's quick and easy to check the ha...
    5: ...ctory default IP for this router is 192.168.0.1, user is "admin", password is blank.
    8: * 4 MB board, so no need to use "micro" DD-WRT builds.
    10: ...sed in 2009?), so it's widely available for purchase new.
    15: ...o cannot be a NAS for a USB drive, nor can it be used for [[Printer Sharing]] of a USB printer.
  36. D-Link DIR-615 rev E3 (3,928 bytes)
    3: ...rsion is also stuck on the bottom of the router itself. This means it's quick and easy to check the ha...
    5: ...ctory default IP for this router is 192.168.0.1, user is "admin", password is blank.
    8: * 4 MB board, so no need to use "micro" DD-WRT builds.
    10: ...istribution, there are a lot of them around now, used
    14: ...o cannot be a NAS for a USB drive, nor can it be used for [[Printer Sharing]] of a USB printer.
  37. 刷机 (18,418 bytes)
    8: ...http://www.dd-wrt.com/site/support/router-database
    22: ...[[http://www.dd-wrt.com/site/support/router-database]] 将会帮助你确定你的设备所需的正...
    27: ... just going by what model you think you have - [[User:Clock|clock]].
    28: ...t may indicate how many files you need, etc (- [[User:Clock|clock]]).
    29: ... DD-WRT version for your device. You may need to use an SVN or experimental build.
  38. Firmware FAQ/pt (1,622 bytes)
    4: ...rtigo está em processo de tradução, e encontra-se incompleto. Além disso, referências para outros...
    6: ...s of them. As time goes by, we hope to eventually see all of the pages translated. Meanwhile, enjoy wh...
    11: ...y|Glossário]]. Se você ainda não souber do que se trata, procure na internet ou pergunte nos fórun...
    18: ...ência. Por enquanto, você pode seguir lendo o [[Firmware_FAQ|restante deste artigo em inglês]].
    20: ...e patient. Meanwhile, you can go on reading the [[Firmware_FAQ|remainder of this article in English]].
  39. Netgear WNR2000V2 (7,719 bytes)
    39: Build Date: Wed Sep 9 14:33:22 CST 2009
    62: ...', but '''''board_data'' and ''nvram'' must be preserved.'''
    67: ...tgear_WNR2000v2 VERSION 2] MODEL ONLY!''' For V3 see [[Netgear_WNR2000V3|HERE]].
    68: ...vices|incompatible devices]] without u-boot mods (search the forums).
    70: #Read the [[Firmware_FAQ|Firmware FAQ]] and [http://www.dd-wrt.com/phpBB2/...
  40. D-Link DIR-810L (5,047 bytes)
    50: scan from offset 170000
    61: '''Be sure to use the correct revision directory for the A1/B1/C1 m...
    62: ...FAQ|Firmware FAQ]], SoC forum, and device thread (see [[#Notes|Notes]])
    66: ...eset the router from the GUI (or press and hold reset until the lights flash)
    67: ...s until the Tools->Firmware Upgrade'' can be accessed
  41. Linksys E3200 (4,489 bytes)
    49: ... a max of 20dBm then a setting of 100mW could be used as 20dBm = 100mW 17dBm = 50mW and so on.
    75: *If already running DD-WRT '''only use the NV60K build''' (or the trailed build)
    76: ...ding the newer NV60K.bin files for some Linksys E-series routers
    77: ...nfuse this with other E-series routers that must use only the NV64K builds
    78: ...this unit was added in build 17041''', so do not use an older build or you will brick your unit!
  42. Accueil/fr (2,049 bytes)
    12: |'''[[Firmware_FAQ/fr|FAQ]]''' <br/> Foire aux questions
    19: ...'[[Nouveau_tuto|Tutoriels ]]''' <br/>Tâches de base et avancées pour la configuration de votre route...
    29: ...Hardware DIY]]''' <br/> Hardware tutorials, JTAG, serial port, how to open, ...
    42: __NOEDITSECTION__
  43. Netgear R7000 (8,975 bytes)
    51: !Serial
    64: ...gs is set, perform one last router reboot for the settings to be read on module load.''
    71: ...a Torrent download of a large Linux ISO. In all cases ensure that the download is capable of maxing ou...
    117: ...overhead. Therefore is likely to represent base case scenario.'''<br>
    118: ... is unlikely to reach 1 Gigabit speeds with these settings.'''
  44. Netgear R6300v2 (9,719 bytes)
    3: The R6300v2 is an ARM device. '''DO NOT USE''' this guide for the MIPS [[Netgear_R6300|R6300 ...
    43: ... blue stripe, no "CH" on the bottom label, and whose firmware has no trailing "CH". The Initial Flash ...
    44: ...or further information about updating these units see this thread. [https://forum.dd-wrt.com/phpBB2/vi...
    66: ...wrt.K3_R6300V2CH.chk R6300V2CH.chk] (broken link, see below)
    81: ...including default username/password, are in flash section below)</li>
  45. Netgear WNDR4300 (7,508 bytes)
    34: Max TX Power assumes used regulatory domain is Canada/USA/Haiti. Others ma...
    38: ...ions require its own firmware build, whether you use stock firmware or DD-WRT. Installation of DD-WRT ...
    48: ..., check New Build threads for recommendations.<br>See [[Index:FAQ#Which_router_should_I_buy.3F|Where d...
    64: ...set your NETGEAR router to factory defaults via reset button or WebUI.
    67: #Launch a web browser and enter http://routerlogin.net (or http://192....
  46. Asus RT-AC88U (9,626 bytes)
    27: ! Serial:
    88: #* NOTE: You may optionally use the '''asus_rt-ac88u-firmware.trx''' file from th...
    89: #* See [[Firmware_FAQ#Where_do_I_download_firmware.3F|here]] for more i...
    90: ...0.3 from the [https://www.asus.com/networking-iot-servers/wifi-routers/asus-wifi-routers/rt-ac88u/help...
    99: ...https://www.asus.com/support/faq/1000814/ How to use Rescue Mode (Firmware Restoration)?] on the Asus ...
  47. TP-Link TL-WR841nd v9 (1,125 bytes)
    9: Also see: [[TP-LINK TL-WR841ND]]
    14: [[Firmware_FAQ#Which_router_should_I_buy.3F|Where do I download ...
    15: ...tial build]''' (you should update to a newer release after that)
  48. Netgear R6300 (10,406 bytes)
    48: ... once their "New Build" thread is reviewed. See [[Firmware_FAQ#Where_do_I_download_firmware.3F|Where do I downlo...
    54: #Reset router:
    56: ##Press & hold Reset button for 20sec, or until Power light starts flashing.
    57: ##Release Reset button, and router should reboot with much flash...
    61: #Open Web browser and clear cache. (Initiate by holding down Shift...
  49. TP Link Archer C9 (15,608 bytes)
    4: ...echinfodepot.shoutwiki.com/wiki/TP-LINK_Archer_C9_seires Hardware] [https://wikidevi.wi-cat.ru/TP-LINK...
    83: !Serial
    157: ...king Solution to Archer C9 V1 - software only, no serial] on how to downgrade.
    160: ...bin''' from the current release directory if you used the above file for initial flash.
    161: #* See "Upgrading DD-WRT" for upgrade procedure.
  50. Linksys EA6900 (7,071 bytes)
    5: ...forum.dd-wrt.com/phpBB2/viewtopic.php?t=320688 a user has flashed one to the EA6900 firmware].
    55: !Serial
    60: Please refer to this forum thread for the latest info: [...
    62: ...y all of these devices will have auto-updated themselves to the most current Linksys firmware and so w...
    64: ...nload an old Linksys OEM firmware 1.1.42.161129 (see the forum thread to download this)<br>

View (previous 50) (next 50) (20 | 50 | 100 | 250 | 500).



Search in namespaces:

List redirects
Search for