Search results
From DD-WRT Wiki
You searched for DHCP
For more information about searching DD-WRT Wiki, see Help.
Showing below up to 250 results starting with #1.
View (previous 250) (next 250) (20 | 50 | 100 | 250 | 500).
Article title matches
- Static DHCP (7,133 bytes)
1: {{languages|Static_DHCP}}
4: ...equests its IP from the router's DHCP server. The DHCP server recognizes the MAC address of your device'...
6: ...P, and this can be achieved easily through Static DHCP.
13: # DHCP Daemon should be enabled
18: [[Image:DHCP_Static_Lease_GUI_-_build_15704.png|center]] - DNSMasq als DHCP Server (3,337 bytes)
1: {{Languages|DNSMasq as DHCP server}}
2: ...her im Umfang von etwa 300kb sparen, wenn dafür udhcpd abschaltet. 300kb sind nicht viel, wird jetzt de...
4: 1. Man deaktiviere den DHCPD-Dienst auf der "Setup" Seite.
8: dhcp-range=192.168.0.100,192.168.0.150,255.255.255.0,1...
15: dhcp-host=AB:CD:EF:11:22:33,192.168.0.10,host,host.dom... - DNSMasq as DHCP server (15,841 bytes)
1: {{Languages|DNSMasq as DHCP server}}
5: ...et has been removed'']''' and DNSMasq is the only DHCP server in DD-WRT.<br>
6: ...is not to be confused with the udhcpc applet, the DHCP client.<br>
7: ...ups require that the router run udhcpc to acquire DHCP leases for the WAN interface.
12: ... local name lookups for any DHCP client, [[Static_DHCP|static]] or dynamic. - WLAN separate from LAN, with independent dhcp, etc (8,524 bytes)
11: ...separate subnets for wired and wireless, separate dhcp, etc.
13: Contrary to popular belief, DHCPMasq is quite capable of serving different ip rang...
29: ...fi on a separate subnet from my LAN, with its own DHCP scope. In these examples, lan is 192.168.7.0/24, ...
43: dhcp-script=/etc/lease_update.sh
44: dhcp-lease-max=50 - V24: WLAN separate from LAN, with independent DHCP (6,261 bytes)
19: ...Scroll to the bottom and click Add under Multiple DHCP Server. This will bring up several new options. S...
35: ...th wifi clients not being able to acquire IP from DHCP. I found out that there was a problem with the na...
88: ... lease (Note: I use DNSmasq DHCP, for I have the 'DHCP Server' disabled on the LAN segment; see [[Separa... - V24: WLAN separate from LAN, with independent dhcp, etc (64 bytes)
1: ...T [[V24: WLAN separate from LAN, with independent DHCP]] - DNSMasq as DHCP server/de (37 bytes)
1: #REDIRECT [[DNSMasq als DHCP Server]] - Static DHCP/zh cn (5,604 bytes)
1: {{languages|Static_DHCP}}
2: 首先,英文版本的Static DHCP图片取自V23,落后了,所以一张截图...
3: ...//en.wikipedia.org/wiki/MAC_address MAC地址] 。DHCP服务器确认您网卡的MAC地址并将静态IP...
5: ...服务器一个静态的IP,这可以通过静态DHCP容易。
6: ... v24-sp2 (10/10/09) mega(SVN revision 13064)静态DHCP设置页面,leangjia截图]] - DNSMasq as DHCP server/zh cn (9,391 bytes)
1: {{Languages|DNSMasq as DHCP server}}
2: ...CP service [http://udhcp.busybox.net/ "udhcpd"]. uDHCPd uses more RAM than DNSMasq.
4: Using DNSMasq as the sole DHCP server can save you 300kB. With this savings you ...
6: ... local name lookups for any DHCP client, [[Static_DHCP|static]] or dynamic.
8: ...ups require that the router run udhcpc to acquire DHCP leases for the WAN interface. - Static DHCP/ru (47 bytes)
1: #REDIRECT [[Резервирование DHCP]] - Резервирование DHCP (12,878 bytes)
1: {{languages|Static_DHCP}}
4: ...DHCP-сервера маршрутизатора. DHCP-сервер распознает MAC-адрес ...
6: ...зоваться и резервирование DHCP. Если вы перенаправляете в...
13: ...сервер в группе параметров DHCP Server должен быть включен.
20: [[Image:DHCP_Static_Lease_GUI_-_build_15704.png|center]]
Page text matches
- DD-WRT Doku (DE) (83,042 bytes)
225: *Statische DHCP-Adresszuweisung
534: ...hl bei "DNS-Server automatisch beziehen", um eine DHCP-IP-Adresse vom Router zu erhalten. Oder wechseln ...
652: ...outer*[Bemerkung] - being a bridged setup and all DHCP is being done by the host AP - it is possible to ...
671: ..."-> "Netzwerke" bei Punkt "DHCPD" einen multiblen DHCP Server hinzufügen!*'''APPLY Settings'''
672: #Am Client noch DHCP einstellen, so hat es bei mir funktioniert! Viel ... - Beschreibung der einzelnen Einstellungen (dd-wrt (18,677 bytes)
11: ...ie Internet-Anbindung, sprich den WAN-Port. Neben DHCP gibts auch PPPoE, PPTP, L2TP, statische IP oder d...
179: <u>Dhcpd</u><br>
180: ...Dämon des WRT, u.a. kann man hier auch statische DHCP-Adressen vergeben.
185: ...t DHCP Rechner im LAN um statische und dynamische DHCP-Hostnamen aufzulösen.
201: ...r. Dieser Adressbereich sollte sich nicht mit den DHCP-Adressen überschneiden. (z.B. 192.168.1.230-240)... - Alphabetischer Index (1,432 bytes)
26: *[[DNSMasq als DHCP Server]] - Static PPTP VPN Client (18,072 bytes)
38: ...o have set IPs in this setup is to use the static DHCP option. - Verizon FIOS setup with dd-wrt as primary router (5,626 bytes)
17: ...ill have to contact Verizon to release/renew your DHCP connection on their side….By cloning the MAC ad...
19: 5 – On the AT you can leave the DHCP turned on for the “Network (Home/Office)” sid... - Tutorials (8,775 bytes)
30: *[[DNSMasq as DHCP server]]
73: *[[Static DHCP]]
137: *[[PXE]] - Boot images with DD-WRT DHCP]] - Hardware (18,720 bytes)
171: ...face of the router MUST be configured EITHER with DHCP or with a Static IP address, it must also have Qo... - Skript-Schnipsel (15,104 bytes)
147: ...nur, wenn der Wireless-Client eine IP-Adresse vom DHCP-Server bekommen hat (daher dumpleases).'' - Recover from a bad flash (41,673 bytes)
71: ...8.1.x" is good. If you do not have a good IP, the DHCP Server might not be working. So set your IP manua...
279: ...en it should assign your computer an address with DHCP.
459: ...t cable interface from static IP settings back to DHCP, wait a few seconds for the network interface res... - Station Mode (5,583 bytes)
11: A Station Mode router uses its own DHCP server for IP Address, Gateway, and DNS server to...
29: ... to ''Static IP'' from "Automatic Configuration - DHCP"
36: ...DNS servers in ''Network Address Server Settings (DHCP)'' if not provided or wanted from WAN - Glossary (58,851 bytes)
113: ...ntly, NAT is no longer used and services (such as DHCP) that are running on the original network will wo...
145: ===DHCP Server===
148: ===DHCP Forwarder===
149: ... server, rather than needing multiple distributed DHCP servers for their routers.
171: ...k. Because most ISPs provide IP addresses through DHCP (or charge extra for a static IP address) your IP... - WDS Linked router network (21,712 bytes)
38: ...AP and WDS Station. Use any number outside of the DHCP range (default range is 192.168.1.100 to 192.168....
73: ... the same subnet as the WDS AP but outside of its DHCP range (Ex: 192.168.1.2, if using the default rang...
77: * Uncheck all of the check boxes under DHCP
78: * Disable the DHCP Server
149: ...s (DHCP) . Also Uncheck the Three boxes below the DHCP Server. - Chillispot (36,851 bytes)
78: ...sting LAN is left completely alone. If you have a DHCP server or some custom corporate setup and you don...
99: ...N Bridge" is disabled, the DD-WRT device's normal DHCP Server must be off.'''
105: ...n page) of the Web Interface, turn off the DD-WRT DHCP Server.
106: ...virtual LAN interface at 192.168.1.1 and provides DHCP Services again on 192.168.1.x for all your Wirele...
111: #'''DHCP Interface''': select "LAN" this is the bridge bet... - Port Forwarding (14,856 bytes)
56: ...to set your static IPs outside of your automatic (DHCP) address range. This range is 192.168.1.100-192.1...
90: ...g to is configured by for automatic IP address by DHCP, you will periodically have to update the last fi... - Заводские установки (28,571 bytes)
160: dhcpfwd_ip=0.0.0.0
167: pptp_use_dhcp=0
232: dhcp_start=100
249: dhcp_lease=1440
395: ...-source$PROT:002:l7$PORT:003:0:0< >$NAME:004:dhcp$PROT:002:l7$PORT:003:0:0< >$NAME:013:directc... - Iptables command (26,660 bytes)
96: ...tion steps are targeted toward users with a basic DHCP connection for the WAN part. So, if using PPPoE w...
414: ==Firewall blocks DHCP renewal responses==
417: ... DHCP renewal responses which causes the router's DHCP client to request a new IP and for current connec... - Separate LAN and WLAN (outdated) (15,234 bytes)
29: Enable DHCP for 192.168.1.x for vlan0
30: Enable DHCP for 192.168.2.x for eth1
39: Set ''wifi_proto'' to dhcp or static (run dhcp for wifi hosts?)
47: Enable DHCP for <wireless_network> for eth1
62: Enable DHCP for <lan_adapter_network> for vlan0 - IPv6 (tutorial) (36,148 bytes)
28: Radvd is similar to a DHCP server. It advertises your IPv6 prefix to the lo...
97: ...tion steps are targeted toward users with a basic DHCP connection for the WAN part. So, if using PPPoE w...
106: Radvd is similar to a DHCP server. It advertises your IPv6 prefix to the lo... - OpenVPN (29,209 bytes)
164: ...ients use the network dhcp server not the openvpn dhcp. {} []
170: ;Block DHCP accross the tunnel: Dont allow DHCP requests across tunnel (Only in bridge mode).
337: ipconfig set $1 DHCP
345: ... the TAP interface to request an IP address using DHCP. Make sure to make the script executable with 'ch...
349: ...to your internal LAN. If your router is running a DHCP server, the TAP interface will be assigned an IP ... - Firewall (8,046 bytes)
49: ... and ip configurations are leased to clients by a DHCP server.
50: ...ith some ip configuration normally acquired via a DHCP client.
58: ...[:Category:PPPOE|PPPoE client]], [[:Category:DHCP|DHCP server(s) or client]] and so on. - Static DHCP (7,133 bytes)
1: {{languages|Static_DHCP}}
4: ...equests its IP from the router's DHCP server. The DHCP server recognizes the MAC address of your device'...
6: ...P, and this can be achieved easily through Static DHCP.
13: # DHCP Daemon should be enabled
18: [[Image:DHCP_Static_Lease_GUI_-_build_15704.png|center]] - Bootvorgang (68,911 bytes)
152: info, udhcp server (v0.9.8) started
215: Hit enter to continue...info, udhcp client (v0.9.8) started
788: to set this information via DHCP.
792: ...auto Configure interface automatically via DHCP
1059: info, udhcp server (v0.9.8) started - Firewall Builder (7,019 bytes)
13: ...can't work (or better - this rule will break your DHCP for the first configuration.) So delete rule numb... - ¿Qué es DD-WRT? (4,318 bytes)
31: ...der|DHCP Forwarder]] ([http://udhcp.busybox.net/ udhcp])
32: ...rver|Servidor DHCP]] ([http://udhcp.busybox.net/ udhcp] o [http://thekelleys.org.uk/dnsmasq/doc.html Dns... - Beschreibung der einzelnen Einstellungen (25,263 bytes)
9: ...AN-Port. Neben [http://de.wikipedia.org/wiki/DHCP DHCP] gibts auch [http://de.wikipedia.org/wiki/PPPoE P...
12: ...afft und habe meinen Linksys-Router vorerst über DHCP mit dem Arcor-Router verbunden. Wie waers mit Ans...
199: <u>DHCPd</u><br>
200: ...Dämon des WRT, u.a. kann man hier auch statische DHCP-Adressen vergeben (Achtung: in DD-WRT v22 war die...
206: ...t DHCP Rechner im LAN um statische und dynamische DHCP-Hostnamen aufzulösen. - Kismet on Linux (4,875 bytes)
7: ...he dhcp server running if you do not have ahother dhcp server on your network). I also turned off the f... - Wrt54g kismet with linux server (9,309 bytes)
18: ...he dhcp server running if you do not have another dhcp server on your network). I also turned off the f... - Linksys WRT610N (11,615 bytes)
75: #reconnect ethernet (DHCP shoud give IP address to computer) - Feature requests (17,201 bytes)
52: ...o fix and IP address of the pool of IP Address of DHCP to certain MAC addresses. But no limit on the am...
63: ...independend networking configuration and multiple dhcp server options (see also Setup->Networking)
78: ...ew library like DHCPv6:Dibbler http://klub.com.pl/dhcpv6/ )
98: * PPPoE + DHCP at the same time - Wireless Bridge (43,131 bytes)
12: ...ected via [[Client Mode Wireless]] cannot share a DHCP server.[[Image:standard_bridge_large.jpg|right|th...
22: ...rk between the DHCP server in the primary and the DHCP clients in computers connected to the secondary i...
24: ...ck OK and close. Now your PC will try to run the DHCP client, but if it fails (as it will with V24 in t...
28: ...rt to switch checked, DHCP Type - DHCP Forwarder, DHCP Server 192.168.1.1. Click save then apply. Afte...
43: Don't use SP1. It has DHCP throughput issues. Use one of the Beta builds. ... - Script examples (10,499 bytes)
7: ''Note: Only work if you get an IP address from DHCP'' - Wake-on-LAN (tutorial) (10,143 bytes)
14: ...ned or through [[Static_DHCP#Configuration|static DHCP]]. In the example below, we assume your router LA... - OpenVPN-Tunnel Server / Client, Netzwerke verbinden (12,733 bytes)
51: ...sst, seine Rechner mit fixen IP - Adressen über DHCP ausrüsten. - Kai Console Gaming (7,561 bytes)
20: * You have a DHCP Server running on your router.
34: ...t up for DHCP. You will need it to be set up for DHCP to properly get the DNS and gateway information l...
36: [[Image:Kaid-DHCPdSettings.gif]]
46: ...s (DHCP)" section, make sure the "Use DNSMasq for DHCP" setting is enabled, save your changes, and wait ...
50: ...way and DNS, even if the XBMC is set in Automatic DHCP mode. This is the primary reason for most issues... - DNSMasq als DHCP Server (3,337 bytes)
1: {{Languages|DNSMasq as DHCP server}}
2: ...her im Umfang von etwa 300kb sparen, wenn dafür udhcpd abschaltet. 300kb sind nicht viel, wird jetzt de...
4: 1. Man deaktiviere den DHCPD-Dienst auf der "Setup" Seite.
8: dhcp-range=192.168.0.100,192.168.0.150,255.255.255.0,1...
15: dhcp-host=AB:CD:EF:11:22:33,192.168.0.10,host,host.dom... - DD-WRT Docu (FR) (22,239 bytes)
29: *Assignation DHCP Statique
119: ...lle-ci ait une IP fixe plutôt que paramétré en DHCP (propriétés TCP/IP). <br>
210: [[Static DHCP]]<br /> - Wake-on-LAN (tutorial)/fr (11,487 bytes)
14: ...a une configuration [[Static_DHCP#Configuration| DHCP statique]]. Dans l'exemple qui suit nous supposon... - DNSMasq as DHCP server (15,841 bytes)
1: {{Languages|DNSMasq as DHCP server}}
5: ...et has been removed'']''' and DNSMasq is the only DHCP server in DD-WRT.<br>
6: ...is not to be confused with the udhcpc applet, the DHCP client.<br>
7: ...ups require that the router run udhcpc to acquire DHCP leases for the WAN interface.
12: ... local name lookups for any DHCP client, [[Static_DHCP|static]] or dynamic. - HTTP Redirect (3,828 bytes)
14: ...subject to the redirect. For example if you have DHCP set to dish your computers into 192.168.1.xx then... - NoCatSplash (16,616 bytes)
13: ...o'' occurs when the device is set to not act as a DHCP server. More than likely, there are other setting... - DD-WRT Docu (IT) (14,289 bytes)
33: *Gestione DHCP statico
151: [[DNSMasq_as_DHCP_server]]<br />
164: [[Static DHCP]]<br /> - VLAN Detached Networks each with Wireless and Internet (4,809 bytes)
21: dhcp-range=br1,192.168.2.100,192.168.2.120,255.255.255...
22: dhcp-option=net:br1,3,192.168.2.1 - Separate LAN and WLAN (5,383 bytes)
28: === Step 2: Add DHCP for the unbridged WLAN interface ===
29: # Press the '''Add''' button in the '''Multiple DHCP Server''' section.
31: ...''Apply Settings''' button to finish enabling the DHCP server for the wireless interface.
32: [[Image:Eth1_DHCP.jpg]]
34: ...Options'''. Note that those instructions set up a DHCP server for a bridge, so you will need to substitu... - DD-WRT Manual (SE) (30,300 bytes)
58: *DHCP Forwarder ([http://udhcp.busybox.net/ udhcp])
59: *DHCP Server ([http://udhcp.busybox.net/ udhcp] eller [http://thekelleys.org.uk/dnsmasq/doc.html...
84: *Statiska DHCP-inställningar
235: Vänta tills din dator får en ip-adress (om dhcp är konfiguerat)<br>
373: [[DNSMasq_as_DHCP_server|DNSMasq som DHCP server]]<br /> - Useful Scripts (54,380 bytes)
628: ...puter by name instead of IP address/MAC, based on DHCP lease table (mandatory).<br>
634: STATICS=/tmp/udhcpd.statics
660: echo Unable to find \"$STATION\" in DHCP static file $STATICS, please use \" \<hostname\>\...
666: I updated the above script to work with dnsmasq dhcp reservation.
680: grep 'dhcp-host' $STATICS | while read LINE - PPTP Server Configuration (20,228 bytes)
78: ...he LAN segment of the network, and outside of the DHCP address range.
82: ''Working Example (assuming DHCP range of 192.168.111.100-199):'' 192.168.111.200-...
302: ...ections in the range of 10.0.0.50-59 (Use outside DHCP range!). In a subnet with subnetmask 255.255.255....
337: DHCP gives addresses from 10.0.0.100 to 10.0.0.130 - Motorola WR850G (8,284 bytes)
26: ...ard's settings are set to automatically detecting DHCP. '''NOTE:''' For the Motorola WE800G, the defaul...
37: #* You may need to renew your DHCP license. - Station Bridge (Routed) (4,967 bytes)
16: ... at 192.168.1.1, so use something else not in the DHCP range.
28: ... subnet range as your primary router, outside the dhcp pool (e.g. 192.168.1.6)
31: #* Disable DHCP Server
32: #* Uncheck "Use DNSMasq for DNS", "DHCP-Authoritative", "Forced DNS Redirection" - DD-WRT on WR850G v1 (deutsch) (17,039 bytes)
103: <li>MODEM (welches über DHCP verbunden ist) leuchtet "orange" (rot und grün) ...
119: Mit Linux, bei dem die IP-Adressen über einen DHCP zugewiesen wurden und zusätzlich feste (bekannte...
165: Versuchen Sie jetzt, eine Adresse über DHCP zu erhalten (die Vorgehensweise hängt von Ihrer ...
171: Versuchen sie, eine IP-Adresse vom DHCP zu erhalten, dann versuchen sie eine Verbindung z...
175: Wenn sie keine IP-Adresse vom DHCP erhalten, versuchen sie es mit einer festen IP-Ad... - WR850G v1 (26,232 bytes)
252: <li>MODEM (which is connected via DHCP) shows "orange" (red and green) first blinking bu...
268: With Linux, you may have an IP assigned by your DHCP server, and additional (aliased) addresses (use
312: Now try to get an address via DHCP (how to do this depends on your Linux distributio...
319: Try to get a DHCP address. Then connect to the HTTP port. Don't for...
322: If you cannot manage to get a DHCP address, and assigning a fixed address from the (... - Spanning Tree Protocol (29,361 bytes)
9: ...se certain services on the client device (such as DHCP) to time-out.
11: ...ve it disabled, as STP conflicts with the routers DHCP client for the WAN connection.
64: I was having a problem with DHCP and topology changes on Spanning Tree and suspect...
65: ...ssociate with the AP(dd-wrt router) but not get a DHCP assigned address. - PPTP Tunneling (5,613 bytes)
25: ** DHCP Range: 192.168.1.100-150
33: ** DHCP Range: 192.168.2.100-150
152: ...pool for VPN clients must be outside the range of DHCP clients. - Point-to-Point PPTP Tunneling usando dos DD-WRT (3,530 bytes)
12: | rango DHCP
29: | rango DHCP
158: ...go de Client IP(s) debe estar fuera del que da el dhcp - Factory Defaults (25,206 bytes)
162: dhcpfwd_ip=0.0.0.0
169: pptp_use_dhcp=0
234: dhcp_start=100
251: dhcp_lease=1440
397: ...-source$PROT:002:l7$PORT:003:0:0< >$NAME:004:dhcp$PROT:002:l7$PORT:003:0:0< >$NAME:013:directc... - Installation (20,950 bytes)
62: ...s. Your PC will be assigned your external IP with DHCP, and you will be on the net. Remember to use a so... - Netgear R9000 (8,270 bytes)
163: ...ading, click the '''Add''' button to create a new DHCP server. In the ensuing list box, scroll through t... - Verizon FiOS - Using Your Own Router (6,751 bytes)
19: *Login to the Actiontec, and release your DHCP lease.
39: # First, release your DHCP lease from the Actiontec. Do this the same way a...
42: # Verify that your router is getting a proper DHCP lease. This should include the address assigned ...
47: ..., you may not get a new WAN IP when you click on "DHCP Renew". To get a new lease, you must (a) call Ver... - Asus WL-500W (8,082 bytes)
45: #Complete your standard WAN, LAN, DHCP configuration so that your router has working Int... - What is DD-WRT? (20,620 bytes)
136: ...der|DHCP Forwarder]] ([http://udhcp.busybox.net/ udhcp])
148: ...Server|DHCP Server]] ([http://udhcp.busybox.net/ udhcp] or [http://thekelleys.org.uk/dnsmasq/doc.html Dn...
484: | align="left" | [[Glossary#Static DHCP|Static DHCP]] - Dual-WAN for simple round-robin load equalization (7,746 bytes)
22: ...it - dont like this bit, it doesnt seem to be for DHCP connection and looks like its for a static IP con... - Access To Modem Configuration (8,284 bytes)
41: * ADSL2+ service with static IP (no PPPoE or DHCP) - Wireless access point (16,324 bytes)
8: ...DHCP configuration from the gateway or some other DHCP server, and could be accessed by other clients on...
10: ...e IP addresses (like a gateway configuration with DHCP/NAT) because it makes it difficult to track down ...
26: * Disable DHCP and set the wireless channel different from the o...
27: ...ess to 192.168.1.2 (or any IP outside the gateway DHCP range that does not collide with the gateway nor ...
39: ....2 (same subnet as primary router but outside the DHCP range) - ¿Qué es "DD-WRT"? (11,698 bytes)
26: *DHCP Forwarder ([http://udhcp.busybox.net/ udhcp])
27: *Servidor DHCP ([http://udhcp.busybox.net/ udhcp] or [http://thekelleys.org.uk/dnsmasq/doc.html Dn...
52: ...e;n de direcciones IP estáticas vía DHCP - Instalación (27,687 bytes)
234: # Deja tu Dirección IP como automática (DHCP), o a una comenzando con 192.168.1.
263: ... a que tu pc obtenga una dirección ip (si tienes dhcp configurado)
337: ...n de los lease tuve que deshabilitar "DNSMasq for DHCP" .ddt3. - DNSMasq Local Network (9,882 bytes)
51: dhcp-host=machine_name,ip_address
64: dhcp-host=zinc,192.168.1.30
96: (edit by ZC): If you use the "dhcp-host" method with "expand-hosts", the domain will...
113: Static leases from Administration->Services->DHCP Server
121: ... alternate method of static leases is to use the "dhcp-host" method for addresses above, but add MAC add... - Soporte (7,376 bytes)
52: * Incapaz de obtener una dirección DHCP desde la WAN.
55: ...o router/computador, hacer click en el boton de ''DHCP Release'' en el fondo de la página ''Status->Rou... - Wan an switch (2,475 bytes)
25: Der DHCP Server ist an - Instalación en el enrutador WRT54G(S) versión 5 (8,885 bytes)
8: ... direcciones estáticas, o autoriza otro servidor DHCP antes de empezar. Procura sea en la subred 192.16... - Netgear WNDR4500 (3,670 bytes)
73: ...ar firmware to DD-WRT on a WNDR4500 (using router DHCP): - Tutorial de instalación para WRT54G v4 (8,925 bytes)
121: ...eba si es tu caso la conexión de red y cambia el dhcp (buscar ip y demás automáticamente) por ip: 192... - 什么是 "DD-WRT"? (53,158 bytes)
137: ...der|DHCP Forwarder]] ([http://udhcp.busybox.net/ udhcp])
149: ...Server|DHCP Server]] ([http://udhcp.busybox.net/ udhcp] or [http://thekelleys.org.uk/dnsmasq/doc.html Dn...
473: | align="left" | [[Glossary#Static DHCP|Static DHCP]] - Bridging (2,653 bytes)
25: ...bridge is having secondary computers obtain their DHCP leases from your main router. Furthermore, you do... - Recuperando de una instalación fallida (7,247 bytes)
17: ...una dirección IP correcta, puede que el servicio DHCP del router no esté funcionando. Asi que ingresa ... - Quick list of Optware packages (104,401 bytes)
174: * dhcp - 4.1-ESV-R2-1 - A DHCP Server
183: * dnsmasq - 2.57-1 - DNS and DHCP server - 配置 HOWTOs (4,703 bytes)
14: * [[DNSMasq_as_DHCP_server|DNSMasq as DHCP server]]<br />
25: * [[Static DHCP]]<br /> - MN-700 (10,914 bytes)
71: ..., a valid IP address is '''required'''. Since no DHCP server is available in this mode, either the host...
76: ...address (DHCP works, but takes longer because the DHCP client must first time-out and assign an automati... - Universal Wireless Repeater (9,297 bytes)
12: ...uter as a client, getting a single IP address via DHCP. Effectively the SSID network it connects to bec...
16: ...r" and you receive the address 172.16.101.100 via DHCP. As far as your laptop is concerned you are talk... - Configuraciones, (COMO HACERLO o HOWTOs) (8,212 bytes)
23: ===> DHCP server lo desactivamos.
58: (El router se conecta al AP, y el DHCP del AP le asignara una ip al router.
122: DHCPServer activado. - Firmware FAQ (40,468 bytes)
91: Another alternative is to check the DHCP-provided IP address assigned to the connected com...
151: ...an't I obtain an IP address from the WAN side via DHCP? ==
157: Now you ''may'' have an option to click the DHCP Release button and then turn off the MAC cloning.
199: ...o acquire network information and a public IP via DHCP protocol over the router's WAN port. This primari...
202: ...assword. For cable and satellite users, generally DHCP is the correct setting. For Comcast Cable users, ... - Dual WAN with one as standby backup (4,340 bytes)
20: Also, I am assuming DNSMasq is used for DHCP and DNS. JFFS should be enabled - Sharing Dialup (5,424 bytes)
8: ...rs/devices. Windows gives you no control over the DHCP server or what IP addresses will be used for whic...
24: ... on the same network. But technically you won't. DHCP from the Internet host computer won't come throug...
35: * Disable DHCP. - Internal device network (4,651 bytes)
10: ...king the PC's ip settings - try release/renew the dhcp lease if not ok):
34: **[[:Category:DHCP|DHCP server, client]]
60: *[[V24: WLAN separate from LAN, with independent DHCP]]
61: *[[WLAN separate from LAN, with independent dhcp, etc]] - Linksys WRT54GS v7.0 & 7.2 (5,118 bytes)
19: # Set a static IP address (outside DHCP range e.g. 192.168.1.10), connect the PC ethernet...
24: #*#*Ensure this static IP is outside the DHCP range
44: ... IP (e.g. 192.168.1.10 or any address outside the DHCP range) - Installation/ja (27,080 bytes)
67: ...s. Your PC will be assigned your external IP with DHCP, and you will be on the net. Remember to use a so... - Linksys WRT54GS v3.0 (2,022 bytes)
23: * '''Also as a side note, if you intend on using DHCP, you will want to unset your static ip'''. - Gateworks Avila/Cambria Installation (14,682 bytes)
41: * Manually Specified Address (no DHCP) - WLAN Client (1,862 bytes)
1: ...s WLAN-Netzwerk integrieren. Sofern in diesem ein DHCP-Server zur Verfügung steht, ist das ganze mit ei...
2: ...als Gateway, die angeschlossenen PCs erhalten per DHCP die notwendigen Angaben, DD-WRT wiederum erhält ...
29: PCs anschliessen, DHCP aktivieren, fertig.. - AutoAP (11,662 bytes)
96: :'''nvram set autoap_dhcpw="15"'''
97: ::The amount of time to wait for a DHCP renewal to complete. If the routers you're access... - LaFonera Software Flashing (30,993 bytes)
348: ...hould reboot and start DD-WRT. It by default will DHCP an external IP address, start an open wireless ne... - Routeurs en mode réseau WDS (6,113 bytes)
47: ...de DHCP-Forwarder pour n'avoir qu'un seul serveur DHCP sur votre réseau.
48: ...> Basic Setup -- Network Address Server Settings (DHCP) -- Static DNS 1,2,3''', entrez les paramètres D... - LaFonera Software Wireless-Bridge (4,033 bytes)
31: 5. Disable DHCP server too, then finish with saving the settings ...
33: ... to connect with a laptop to the WLAN and receive DHCP IP from your mainrouter (assumed 192.168.1.1)
45: ...this setup) and disable "Internet connection" and DHCP. Finally save the setup.
47: ...* be able to receive an IP from your main routers DHCP, by way over your first LaFonera --- WLAN --- sec... - LaFonera Software Chilispot (12,365 bytes)
40: ...b, then internet connection, change the mode from DHCP to static IP from the dropdown option, set an IP ...
115: ...ld have rebooted successfully, by default it will DHCP an external IP address, start an open wireless ne...
135: ...twork Address Server Settings (DHCP)" and untick "DHCP-Authoritative".
159: ...ervices" tab already, you will notice that under "DHCP Server", "Use JFFS for client lease DB" is not mo...
183: ...ur own settings, when you get to the section for "dhcpif" use br0 - Instalacja (266 bytes)
5: * [[Statyczny DHCP]] - LaFonera Software Client-Mode (20,721 bytes)
32: 1. With the Fonera in DHCP Internet Connection mode, change the Fonera's Loc...
68: DHCP Type: DHCP Server
70: DHCP Server: Enable
148: ...status pages of the host router to find a list of DHCP clients, find the La Fonera's mac address in this...
153: ...ternet Connection Type: Automatic Configuration - DHCP. - LaFonera Software Debricking (6,898 bytes)
14: ...ver from options and gave it a try: my fonera did dhcp discovery request, and got ip from tftpd32! After... - LaFonera Software Universal-Repeater (25,850 bytes)
93: killall -9 udhcpc > /dev/null
348: /sbin/udhcpc -i ath1 >> $logFile
350: echo "ath1 interface via external dhcp"
351: echo "ath1 interface via external dhcp" >> $logFile
445: # start DHCP - LaFonera TestingArea (en) (2,245 bytes)
33: ...ided by fonera (should be possible to get IP from DHCP on wired lan when connected to AP))? - Detached Networks using VLAN (3,305 bytes)
15: 2. It activates a DHCP server for each network.<br>
66: dhcp-range=<start ip>,<end ip>,<net mask>,<lease time>
68: dhcp-range=<start ip>,<end ip>,<net mask>,<lease time>
70: dhcp-range=<start ip>,<end ip>,<net mask>,<lease time> - VLAN Detached Networks (Separate Networks With Internet Access) (3,314 bytes)
15: 2. It activates a DHCP server for each network.<br>
71: dhcp-range=<start ip>,<end ip>,<net mask>,<lease time>...
73: dhcp-range=<start ip>,<end ip>,<net mask>,<lease time>...
75: dhcp-range=<start ip>,<end ip>,<net mask>,<lease time>... - VLAN Detached Networks (Separate Networks With Internet) (10,214 bytes)
43: #Under DHCPD click Add.
44: #Set DHCP 0 to vlan3 with a Leasetime of 1440 (24 hours).
46: #Under DHCPD click Add.
47: #Set DHCP 1 to vlan4 with a Leasetime of 1440 (24 hours).
49: #Under DHCPD click Add. - OpenVPN - Site-to-Site Bridged VPN Between Two Routers (15,515 bytes)
21: # Make sure DHCP server is enabled.
23: # Set Maximum DHCP Users to 50.
102: # Make sure DHCP server is enabled.
103: ...t be unique in the same way. Watch out that your DHCP assignments cannot create duplicate addresses.
104: # Set Maximum DHCP Users to 50. - FON Hotspot (52,719 bytes)
90: ...sswd=chillispot --radiusnasid=xx-xx-xx-xx-xx-xx --dhcpif xx-xx-xx-xx-xx-xx
106: ...sswd=chillispot --radiusnasid=xx-xx-xx-xx-xx-xx --dhcpif xx-xx-xx-xx-xx-xx
199: ...llispot later on. The following settings assume a DHCP connection though you can change mostly everythin...
202: Connection Type: Automatic configuration : DHCP
217: '''Network Address Server Settings (DHCP)''' - LaFonera Software Client-Bridge (9,933 bytes)
11: ...Network Places. Your main router also acts as the DHCP issuer for IPs to devices connected to the Fonera...
50: *dhcp server - disable
52: ... *Change DHCP Type to "DHCP Forwarding" to enable dhcp on the ethernet port. This worked on DD-WRT v24 R...
55: *uncheck "Use DNSMasq for DHCP"
57: *uncheck "DHCP-Authoritative" - Fonera Client Bridged (988 bytes)
14: DHCP Server: Disable
31: Network setup: Set either DHCP or fixed IP: - LaFonera Software AP-mode (3,510 bytes)
9: ...exists in your network, you will get IP from this DHCP.
49: ...ot possible to setup La Fonera to get IP from LAN DHCP server. (see todo section)
54: Network Address Server Settings (DHCP)
57: DHCP Type* : DHCP Server
59: DHCP Server : Disable - LaFonera (de) (7,731 bytes)
119: ...lären wie ich FON chillispot mit doppelter SSID ,DHCP auf der virtuellen SSID eth0.1, privater/öffentl... - LaFonera (fr) (6,073 bytes)
91: ...er DD-WRT sur une Fonera avec chillispot, 2 SSID, DHCP sur un SSID virtuel, séparation du réseau priv... - LaFonera TestingArea (de) (2,393 bytes)
27: ...vergeben (es sollte möglich sein eine IP von dem DHCP im drahtgebundenen LAN zu bekommen wenn dieses mi... - LaFonera TestingArea (fr) (2,213 bytes)
27: ... câblé, pas de NAT, pas de DHCP (utilisation du DHCP du réseau câblé)) ? - WLAN separate from LAN, with independent dhcp, etc (8,524 bytes)
11: ...separate subnets for wired and wireless, separate dhcp, etc.
13: Contrary to popular belief, DHCPMasq is quite capable of serving different ip rang...
29: ...fi on a separate subnet from my LAN, with its own DHCP scope. In these examples, lan is 192.168.7.0/24, ...
43: dhcp-script=/etc/lease_update.sh
44: dhcp-lease-max=50 - Linksys WRT300N v1, v1.1 (6,576 bytes)
32: ...sses for MAC filtering, SSID, pass-phrase, static DHCP entries, etc)
52: ...sses for MAC filtering, SSID, pass-phrase, static DHCP entries, etc)
111: * I use static DHCP for my network and found that this page had stran... - Wlan Repeater (9,003 bytes)
59: #**Set up your DHCP range if you desire
73: ... has begun repeating its signal, you will see the DHCP address (generally in the 192.168.1.100-200 range...
77: ...sic Setup->Optional Settings'' will appear in the DHCP clients table of the Host router under ''Status->...
88: ...vious, all managing it's own subnet with it's own DHCP-DNSMasq Authoritative (192.168.[1-2-3-4].0/24. Wo... - Linksys WRT54G2 v1.0 (18,520 bytes)
35: ...Set your computer back to automatically obtaining DHCP and DNS. - Nouveau tuto (3,319 bytes)
28: * [[DNSMasq Comme serveur DHCP]]
61: * [[DHCP Statiques]] - Linksys E2100L (2,608 bytes)
52: #Return your machine to auto-DHCP. - Repeater Bridge (20,647 bytes)
5: ...nts in one segment can get their addresses from a DHCP server in the other segment.
21: ... is configured in a 192.168.1.X subnet and leases DHCP address in the same pool.
37: ...ter</u> in '''AP mode''' (DD-WRT default) with '''DHCP Server ''enabled'''''. Any type of VAP (Virtual ...
80: #*DHCP Server: Disable
91: ... receive IP addresses from the Primary Router via DHCP, and access the internet connection through it's ... - Networking 101 for Dummies (5,653 bytes)
5: ... IP settings automatically. You can only have ONE DHCP server on each LAN/VLAN. - Fr:a propos (7,097 bytes)
27: *Assignation DHCP Statique - Installation/fr (33,890 bytes)
72: ...se verra attribué votre adresse IP externe par DHCP et vous serez connecté à l'Internet. Pensez à ... - Fr:tutorials (1,711 bytes)
22: [[Static DHCP]]<br /> - WHR-HP-AG108 (13,246 bytes)
45: ...P-AG108 (to keep your computer from releasing its DHCP lease when it sees its physical link go down when... - Buffalo (19,760 bytes)
50: ... subnet -- that way you don't have to jiggle your dhcp settings after the flash.
119: ...re your network interface on your computer to use DHCP. The computer pulls an IP address and network inf...
189: ...cho * Reset your ethernet card's settings back to DHCP. - Obtaining Router IP (2,183 bytes)
2: ...n which the router IP address may be unknown. If DHCP is disabled on the router, you will not be assign... - How to configure DD-WRT, Chillispot, Apache2, FreeRadius, freeradius-dialupadmin, and MySQL on Debian 4.0 (38,957 bytes)
39: In the DHCP setting, deselect “DHCP-Authoritative”.
63: <LI><P STYLE="font-style: normal">DHCP Interface: WLAN</P>
816: down to “Network Address Server Settings (DHCP)” and
817: disable DHCP Server. Click “Apply Settings”</SPAN...
865: down to “Network Address Server Settings (DHCP)” and - TFTP flash (16,402 bytes)
46: ...d64] ''TFTP client'' (plus various servers: TFTP, DHCP, Syslog, and Log viewer) - OpenVPN - Site-to-Site Bridged VPN Between Two Routers/de (12,985 bytes)
101: * DHCP-Startadresse: 192.168.0.50
102: * Max. DHCP-User: 50
106: * DHCP-Startadresse: 192.168.0.101
107: * Max. DHCP-User: 49
111: * DHCP-Startadresse: 192.168.0.151 - OpenDNS (7,637 bytes)
2: ...gerie, grotesque, etc...). Since most of us have DHCP assigned WAN IP addresses that change periodicall...
8: ...ter to hand out the OpenDNS DNS addresses to your DHCP clients, or you can configure DNSMasq to forward ...
10: '''Option 1 - Configure DHCP with OpenDNS DNS servers'''
12: ...ection » '''Network Address Server Settings (DHCP)''', and:
23: #** DHCP-Authoritative - Repeating Mode Comparisons (6,438 bytes)
19: ... Clarification: Yes it has something to do with DHCP. It will connect to a regular repeater (R) just ... - Linking Routers (4,395 bytes)
21: * [[Repeater Bridge]] - A wireless repeater with DHCP & NAT <u>disabled</u>, clients on <u>same subnet<...
22: ...an_Repeater|Repeater]] - A wireless repeater with DHCP & NAT <u>enabled</u>, clients on <u>different sub... - Reverse Proxy using Entware (5,257 bytes)
48: ... not to use dynamic IP addresses, to do so in the DHCP reservation table in the router's web ui, add the... - Asus RT-AC56U (3,895 bytes)
46: ...booted, set your network adapter settings back to DHCP. - The Easiest Tunnel Ever (8,961 bytes)
96: ...ot requesting any ip nothing special will happen. Dhcp is present and reachable, but unused. - Repeater Bridge/fr (12,531 bytes)
6: ...tenir leurs adresses IP auprès d'un seul serveur DHCP, même si elles se trouvent dans un autre segment...
18: ...sous-réseau 192.168.1.X et attribue des adresses DHCP dans ce même sous-réseau.
47: ...e c'est le routeur principal qui qui fait tout le DHCP, il devrait être possible d'utiliser le même SS...
82: ...teur secondaire, ils recevront une adresse par le DHCP du routeur primaire, et pourront utiliser la conn...
102: ....1.1 (this is the netgears ip address. its the DHCP server) - Repeteur sans fil (12,493 bytes)
3: ...tenir leurs adresses IP auprès d'un seul serveur DHCP, même si elles se trouvent dans un autre segment...
15: ...sous-réseau 192.168.1.X et attribue des adresses DHCP dans ce même sous-réseau.
44: ...e c'est le routeur principal qui qui fait tout le DHCP, il devrait être possible d'utiliser le même SS...
79: ...teur secondaire, ils recevront une adresse par le DHCP du routeur primaire, et pourront utiliser la conn...
99: ....1.1 (this is the netgears ip address. its the DHCP server) - Dual SSID one for public network (5,390 bytes)
19: 3)Setup - networking --> dhcpD add another DHCP server for the second interface choose wl0.1.
42: ...the following the public/virtual AP would not get DHCP or pass traffic through the WAN.<br>
53: ##dhcp-option=br1,3,192.168.2.1
54: ##dhcp-option=br1,6,192.168.1.254
55: ##dhcp-range=br1,192.168.2.20,192.168.2.220,255.255.255.... - LaFoneraPlus Software Flashing (10,090 bytes)
125: ...hould reboot and start DD-WRT. It by default will DHCP an external IP address, start an open wireless ne... - Dual SSID isolated (957 bytes)
22: '''3)Setup - networking --> dhcpD added another DHCP server for the second interface chose wl0.1 - Routing (1,312 bytes)
25: ...itA is his default gateway (normally done through dhcp)
26: ...itB is his default gateway (normally done through dhcp) - V24: WLAN separate from LAN, with independent DHCP (6,261 bytes)
19: ...Scroll to the bottom and click Add under Multiple DHCP Server. This will bring up several new options. S...
35: ...th wifi clients not being able to acquire IP from DHCP. I found out that there was a problem with the na...
88: ... lease (Note: I use DNSmasq DHCP, for I have the 'DHCP Server' disabled on the LAN segment; see [[Separa... - Station Bridge (5,355 bytes)
16: ... at 192.168.1.1, so use something else not in the DHCP range.
29: ... subnet range as your primary router, outside the dhcp pool (e.g. 192.168.1.6)
32: #* Disable DHCP Server
33: #* Uncheck "Use DNSMasq for DNS", "DHCP-Authoritative", "Forced DNS Redirection" - Switch (3,590 bytes)
16: ....2 (i.e. different from primary router and out of DHCP pool)
19: #*DHCP Server : Disable (also uncheck DNSmasq options) - USB on ASUS WL500GPV2 (9,930 bytes)
34: #Complete your standard WAN, LAN, DHCP configuration so that your router has working Int... - LaFonera Software Wireless-Repeater (2,067 bytes)
15: DHCP enable From 192.168.1.100 to 192.168.1.150
23: ...uration DHCP (because my primary access point use DHCP)
31: Network Address Server Settings (DHCP)
32: DHCP Type= DHCP Server (I will assign ip also to laptop connected...
34: Maximum DHCP Users: 44 (Because 192.168.1.254 is used by my ma... - Accton Software Flashing (14,547 bytes)
169: ...hould reboot and start DD-WRT. It by default will DHCP an external IP address, start an open wireless ne... - Прошивка DIR-320 (21,029 bytes)
109: "DisableDHCPMediaSense"=dword:00000001
115: ...учение IP-адреса от сервера DHCP и введите в адресной строк...
185: ...cho * Reset your ethernet card's settings back to DHCP. - Прошивка DIR-330 (9,446 bytes)
60: ...учение IP-адреса от сервера DHCP и введите в адресной строк... - Dual Access PPTP (10,667 bytes)
3: ...адке WAN Setup выбираем Static или DHCP (в зависимости от того, что ...
66: killall udhcpc #убиваем DHCP если оно есть
67: ...pc.pid -s /tmp/udhcpc #перезапускаем DHCP
70: ...присваивался IP адрес через DHCP, выход из этого есть только...
77: ...чаем , то с чем не справился DHCP клиент. - Cellular Phone/USB Modem as WAN connection (7,488 bytes)
25: ...: Main configuration page: leave WAN on Automatic DHCP. Set the MTU manually between 1200-1428 (max) [ht...
41: #<tt>udhcpc -i usb0</tt>
61: #:udhcpc -i usb0<br> - 教程 (8,580 bytes)
22: * [[DNSMasq as DHCP server|用DNSMasq 作DHCP服务器]]
57: * [[Static DHCP|静态DHCP]]
116: * [[WLAN separate from LAN, with independent dhcp, etc]]
117: * [[V24: WLAN separate from LAN, with independent DHCP]] - 桥接 (2,407 bytes)
16: ...bridge is having secondary computers obtain their DHCP leases from your main router. Furthermore, you do... - 连接路由器 (1,174 bytes)
19: * [[Repeater Bridge]] - DHCP Server & NAT <u>disabled</u>, clients on <u>same ...
21: * [[Repeater]] - DHCP Server & NAT <u>enabled</u>, clients on <u>differ... - IPTV - blocking multicast on WIFI (3,504 bytes)
39: == Enable DHCP for the additional local Networks and final steps...
40: # In Setup-->Networking, add two DHCP Servers in the bottom area, one for vlan7, one fo... - D-Link DIR-300 rev A (6,603 bytes)
37: ...nect via telnet to 192.168.1.1 (or to the ip your dhcp server served to the redboot) and port 9000. A D... - PXE (2,146 bytes)
7: ...d simplicity of embedded WRT devices over running DHCP services from full blown Windows or Linux servers...
11: # Direct the DD-WRT DHCP server to point to this boot image
14: Enable DNSMasq as your DHCP server
15: [[Image:DHCP Using DNSMasq Basic Settings.png]]
18: dhcp-boot=pxelinux.0,zorro,192.168.1.10 - VPN (the easy way) v24+ (38,319 bytes)
297: push "dhcp-option DNS 192.168.66.1"
447: ... > Basic Setup > Network Address Server Settings (DHCP) ).
472: ...dresses assigned. '''It must not overlap with the DHCP Servers address range''' (see above, before the f...
682: ...they get their respective settings from my server DHCP, DNS and WINS (samba) information so road-warrior...
734: push "dhcp-option WINS 192.168.254.100" - Asus TFTP Flash (17,505 bytes)
29: ...oad.html Tftpd32] includes TFTP client as well as DHCP, TFTP, SNTP and Syslog servers - DNSMasq using alternative DNS-Servers (1,463 bytes)
3: ...provider? (And you also don't want to change your DHCP-Settings in your router to push the alternative D... - Verizon FIOS setup Walkaround with Coax cable (MoCA) (2,096 bytes)
20: ...ur WAN Connection type to Automatic Configuration-DHCP on the dd-wrt router. Meaning that it will hand ... - Sony PSP and Remote Play (5,269 bytes)
10: *Your WLAN has DHCP enabled
86: ...ign the PS3 a static IP - on the router providing DHCP for your LAN, go to : - LaFonera Software Flashing Ubuntu (15,223 bytes)
76: ... port is expecting to get it's IP from your ISP's DHCP. The port will go into an auto-local mode and ass...
112: ...the IPv4 settings tab. Where it says either Auto (DHCP) or Local-Link, you'll want to change it to "Manu... - Linksys WRT54G v5.0 & 5.1 & 6.0 (8,478 bytes)
48: ...f, my PC is unable to get an ip address by way of DHCP.
54: #DHCP now running, but now the router is in "management... - Insufficient ram (4,134 bytes)
39: ...ise used DHCPd. Please DO NOT disable DNSMasq for DHCP. - Linking Subnets with Static Routes (4,896 bytes)
65: ... need to set up a WINS servers and configure your DHCP servers to advertise the WINS server. - USING YOUR DD-WRT ROUTER TO SHUTDOWN A REMOTE WINDOWS SYSTEM (2,719 bytes)
29: '''2.''' It is recommended that the DHCP server be setup to assign static IP addresses to ... - WL-520GU (8,429 bytes)
11: 4. Wait for your PC to get an IP address (if dhcp is configured). - Asus WL500-- old descriptions (33,699 bytes)
54: <li> Obtain network settings via DHCP
71: <li>Wait for your PC to get an IP address (if dhcp is configured)
86: ... my IP address on PC's interface to 192.168.1.10 (DHCP on Asus didn't work)<br>
193: ... use tftp to upload the files) if for some reason DHCP is not working. I did not need to do this, but if...
400: 4. Verify that DHCP works: - Basic Wireless Settings (24,713 bytes)
298: ...LAN) by giving it its own subnet and even its own DHCP server. If you want a unbridged interface, you ar... - Linksys WRT54G v2.0 (9,258 bytes)
36: ...to PPPoE knocked out the WAN port, worked fine in DHCP. Flashed back to mini generic and everything wor... - Micro Redboot (3,960 bytes)
58: ...arted and requests a dhcp address. If there is no DHCP Server it will fall back to 192.168.1.1 9000. Go ... - VLAN Detached Networks - Linksys E2500 (3,616 bytes)
42: ...up -> Basic Setup -> WAN Connection Type. Set to DHCP or whatever is appropriate for your set up. - Multiple WLANs (14,425 bytes)
46: ...automatically generated once you have set the 2nd dhcp server as explain below.
52: .... Make sure that you can connect to it, receive a DHCP lease, and browse the network/internet before you...
68: ...re that you can connect to both SSID's, receive a DHCP lease, and browse the network/Internet before you...
91: ...he "Apply Settings" button to finish enabling the DHCP server for the br1 interface. (Take note that as ...
94: [[Image:MultiWLAN_add_dhcp.png]] - Linksys WRT320N v1.0 (5,706 bytes)
29: *Switch your PC back to DHCP if needed
62: -Cycle power on the modem to reset the DHCP lease - Asus RT-N12 (12,946 bytes)
78: ...work adapter properties for TCP/IP back automatic DHCP (IP/DNS)
84: #Ensure DHCP is enabled in the ASUS firmware for automatic IP/... - Belkin F5D7230-4 v2xxx and Lower (10,950 bytes)
34: # Set your IP address back to automatic (DHCP), or set it to something beginning with 192.168.1...
117: ... IPv4 configuration back to DHCP and click "Renew DHCP Lease" - Linksys WRT610N v2.0 (9,448 bytes)
52: #reconnect ethernet (DHCP shoud give IP address to computer) - Configuring for Xbox 360 (4,308 bytes)
26: # Set up [[Static DHCP]] for your Xbox 360 - LaFonera 2 Networks w. 1 Port (4,077 bytes)
42: ...s the br0 DHCP will interfere if i try to setup a DHCP instance on br0:1 (if even possible on a virtual ... - D-Link DIR-600vB / 300vB/ru (8,474 bytes)
25: ...лучил IP-адрес от роутера по DHCP, установите его вручную на ...
47: ...тер на получение адреса по DHCP - Buffalo WZR-HP-G300NH (14,503 bytes)
143: ...tatic ip of 192.168.11.2 and either set it to use DHCP or set a static ip of 192.168.1.8
268: ...up/Basic section in DD-WRT and set WINS server in DHCP group to your LAN IP address (ex: 192.168.11.1) - Часто задаваемые вопросы (69,439 bytes)
77: ...предоставленного сервером DHCP IP-адреса, назначенного под...
153: ...ны глобальной сети WAN через DHCP? ==
159: ...'Можно'' нажать кнопку «Release DHCP», а затем отключить клонир...
201: ...упный IP-адрес по протоколу DHCP через порт WAN маршрутизато...
205: ...о телевидения, как правило, DHCP является правильной настр... - Что такое DD-WRT? (41,715 bytes)
31: ...der|DHCP Forwarder]] ([http://udhcp.busybox.net/ udhcp])
32: ...Server|DHCP Server]] ([http://udhcp.busybox.net/ udhcp] or [http://thekelleys.org.uk/dnsmasq/doc.html Dn...
59: *[[Glossary#Static DHCP|Static DHCP]] - OpenVPN Router to Router Bridged Configuration Alternative (Hardware VPN) (5,716 bytes)
6: ... VPN capabilities, but has either wireless and/or DHCP capabilities.
15: ...traffic is routed and encrypted over the VPN. The DHCP lease is provided by the remote DD-WRT server. Al...
22: # Local router IP address is 10.19.77.77 (dhcp is off!!!!)
27: ...DHCP leases for local devices from ANOTHER remote DHCP server, but that it outside the scope of this gui...
31: #Turn off dhcp on local router. - Modem - Connection to Router (2,021 bytes)
3: ...SP could assign you a Static WAN IP or a Dynamic (DHCP) WAN IP address and configuring of your main rout...
5: ...ase IP subnet. Remember there should only be one DHCP server per subnet
9: ... router built in, you would want to shut down the DHCP server on either the modem, or on your host route...
11: To shut of the dhcp server in the modem, you need to set the modem in...
13: ... shut off the dhcp server in your dd-wrt, disable dhcp server in the basic settings page. - Asus WL-500g Premium V2 (13,166 bytes)
142: 7) Change your IP settings back to DHCP and let it get an address
203: ... static ip after flashing, if you intend on using DHCP - Linksys WRT54G v3.1 (2,473 bytes)
29: * '''Also as a side note, if you intend on using DHCP, you will want to unset your static ip'''. - Linksys E2000 (7,786 bytes)
127: ...AN support, VLAN tagging, port trunking, multiple DHCP, bridging, bridge assignment, DDNS, NTP client. [... - DNSMasq as DHCP server/de (37 bytes)
1: #REDIRECT [[DNSMasq als DHCP Server]] - Installation/it (26,496 bytes)
78: ...s. Your PC will be assigned your external IP with DHCP, and you will be on the net. Remember to use a so... - Public Sub-Net Over Dynamic WAN (5,015 bytes)
5: ...c WAN connection and a private IP space served by DHCP - Firmware FAQ/zh cn (35,646 bytes)
66: ...nning Windows, can connect to the router, and the DHCP service is assigning an IP address, the default g...
156: == 为什么我不能通过DHCP从广域网端口获取IP地址 ==
160: ** Now you ''may'' have an option to click the DHCP Release button and then turn off the MAC cloning.
188: ... acquire network information and a public IP (via DHCP protocol) over the router's WAN port; this primar...
191: ...assword. For cable and satellite users, generally DHCP is the correct setting. For Comcast Cable users, ... - Iptables command/zh cn (24,472 bytes)
95: ...tion steps are targeted toward users with a basic DHCP connection for the WAN part. So, if using PPPoE w...
402: ==Firewall blocks DHCP renewal responses==
405: ... DHCP renewal responses which causes the router's DHCP client to request a new IP and for current connec... - Www coverage (2,543 bytes)
30: ...ls/article.php/3624251 DD-WRT Tutorial 1: Static DHCP] - 固件FAQ/zh cn (23,519 bytes)
66: ...nning Windows, can connect to the router, and the DHCP service is assigning an IP address, the default g...
156: ...an't I obtain an IP address from the WAN side via DHCP? ==
160: ** Now you ''may'' have an option to click the DHCP Release button and then turn off the MAC cloning.
188: ... acquire network information and a public IP (via DHCP protocol) over the router's WAN port; this primar...
191: ...assword. For cable and satellite users, generally DHCP is the correct setting. For Comcast Cable users, ... - Netgear WNDR3800 (3,709 bytes)
67: * Should you want to use DHCP ip assignment, remember to un-set the static ip t... - OpenVPN/zh cn (61,835 bytes)
391: ...P address from your router (if you have a running dhcp server) when you connect and that IP address will...
944: ipconfig set $1 DHCP
946: ... the TAP interface to request an IP address using DHCP. Make sure to make the script executable with 'ch...
950: ...to your internal LAN. If your router is running a DHCP server, the TAP interface will be assigned an IP ...
1098: push "dhcp-option DNS 192.168.3.1" - Chillispot/zh cn (27,752 bytes)
80: ...sting LAN is left completely alone. If you have a DHCP server or some custom corporate setup and you don...
104: ...N Bridge' is disabled, the DD-WRT Device's normal DHCP Server must be off.'''
111: ...n page) of the Web Interface, turn off the DD-WRT DHCP Server.
112: ...virtual LAN interface at 192.168.1.1 and provides DHCP Services again on 192.168.1.x for all your Wirele...
117: #'''DHCP Interface''': select "LAN" this is the bridge bet... - NoCatSplash/zh cn (13,817 bytes)
130: ...''' occurs when the device is set to not act as a DHCP server. More than likely, there are other setting... - Конфигурирование (7,335 bytes)
73: ...ревод)</span>[[Резервирование DHCP]] - Enlazando routers (3,056 bytes)
19: ...r o Repeater Bridge]] - Repetidor inalámbico con DHCP & NAT <u>deshabilitado</u>, clientes en <u>misma ...
20: ...epetidor o Repeater]] - Repetidor inalámbico con DHCP & NAT <u>habilitado</u>, clientes en <u>diferente... - Punto acceso inalámbrico (11,226 bytes)
7: ...rían configuración DHCP de algún otro servidor DHCP, y se puede acceder por otros clientes en la red.
9: ... direcciones IP privadas (como muchos routers con DHCP/NAT hacen por defecto), ya que hace que sea difí...
22: .... diferente del router primario y fuera del grupo DHCP)
24: #*DHCP Server/Servidor DHCP : Disable/Desactivar (también desmarque las opci...
65: ====Deshabilite DHCP==== - Switch es (4,354 bytes)
18: .... diferente del router primario y fuera del grupo DHCP)
20: #*DHCP Server/Servidor DHCP : Disable/Desactivar (también desmarque las opci... - Repetidor Puente (12,373 bytes)
7: ...nto pueden obtener sus direcciones de un servidor DHCP en el otro segmento.
23: ...urado en la subred 192.168.1.X y cede direcciones DHCP en el mismo grupo.
38: ...</u> debe estar en '''modo AP''' (defecto) con '''DHCP Server ''activado'''''. El <u>router secondario<...
43: ...enta los ajustes por defecto DD-WRT para el grupo DHCP y SSID
79: #*DHCP Server/Servidor DHCP: Disable/Desactivar - QCA wireless settings (60,838 bytes)
788: ... users will find this very handy. Using a shorter DHCP lease time such as 2 ~ 12 hours instead of defaul...
824: ...LAN) by giving it its own subnet and even its own DHCP server. If you want a unbridged interface, you ar... - Netgear WG602 v3/4 (2,722 bytes)
23: ...ould be no means of access to any other router or dhcp server or the WG602v3 will not set its default ip...
54: #remember to re-enable firewall, antivirus, and dhcp on the computer - Repetidor (11,082 bytes)
60: #**Configura el rango DHCP si lo deseas
78: ...do a repetir sui señal, puedes ver la dirección DHCP (generealmente en el rango 192.068.1.100-150) en ...
82: ...Nombre de host aparecerá en la tabla de clientes DHCP del enrutador host en Estado/Información del sis...
97: ...se DNSmasq for DHCP", "Use DNSmasq for DNS", and "DHCP Authoritative" are all check marked on the Setup>...
109: ...vious, all managing it's own subnet with it's own DHCP-DNSMasq Authoritative (192.168.[1-2-3-4].0/24. Wo... - VLAN Support (11,146 bytes)
447: ...nd after rebooting set up the VLAN with an IP and DHCP on the networking page, and if you have multiple ... - Installation/pt (13,927 bytes)
69: ...esso. Seu computador receberá seu IP externo via DHCP e você estará em rede. Lembre-se de usar um fir... - Netgear WNDR3700 (19,494 bytes)
174: ...t your computer's ethernet interface back to auto DHCP.</li> - Asus RT-N13U (27,544 bytes)
112: ...onfigure router as desired. Default connection is DHCP; for DSL check [http://www.dd-wrt.com/wiki/index....
350: pxe: add: dhcp-boot=pxelinux.0,dd-wrt,192.168.1.1 to Services ->... - IPv6 (教程) (26,913 bytes)
31: Radvd与DHCP服务器类似。它将你的IPv6前缀通知给...
50: ...tion steps are targeted toward users with a basic DHCP connection for the WAN part. So, if using PPPoE w...
62: ...nnounce it to the LAN (br0). Radvd类似于一个DHCP服务器。它公布你的IPv6前缀到本地网... - FON Hotspot on La Fonera (27,637 bytes)
39: ...etworking should be bridging everything including DHCP, so this setting might be superfluous, but it wor...
52: DHCP Interface: br1
81: By this point, DHCP will be working but DNS and ping will not; the cu...
171: == Obtain IP address via DHCP (optional) ==
173: ...7s_IP_Address|Wireless Access Point]] page to add DHCP functionality via a startup script. - AutoAP/zh cn (11,622 bytes)
93: :'''nvram set autoap_dhcpw="15"'''
94: ::The amount of time to wait for a DHCP renewal to complete. If the routers you're access... - WAN Port/de (1,427 bytes)
30: Der DHCP Server ist an - Cellular Phone/USB Modem as WAN connection/zh cn (18,150 bytes)
32: ... WAN connection set on ''Automatic Configuration- DHCP'' on the ''Setup'' -> ''Basic Setup'' page. I don...
274: dhcp_wins=wan<br>
275: wan_proto=dhcp<br>
283: dhcp_domain=wan<br> - WHR-HP-G300N (1,846 bytes)
8: * DHCP - IPv6 setup Hurricane Electric Tunnel Broker (8,283 bytes)
196: '''Dnsmasq must be enabled (DHCP Server) or this will not work!'''
204: Use DNSMasq for DHCP - Checked<br>
206: DHCP-Authoritative - Checked<br> - Firewall Builder/zh cn (6,963 bytes)
13: ...can't work (or better - this rule will break your DHCP for the first configuration.) So delete rule numb... - Serial Recovery (13,387 bytes)
131: ...tic ip on your rig.. The router will not have the dhcp server running. - OpenDNS/zh cn (5,048 bytes)
2: ...gerie, grotesque, etc...). Since most of us have DHCP assigned WAN IP addresses that change periodicall...
8: ...''' tab under '''Network Address Server Settings (DHCP)''' look for '''Static DNS 1''' and '''Static DNS... - Configuring L2TP client with static ip adress of ethernet port (1,271 bytes)
3: ... to connect to L2TP server , if there is no valid DHCP server in the network.
18: I noticed that there is a DHCP server in the network, but it gives me strange an... - What is DD-WRT?/pt (52,338 bytes)
138: ...der|DHCP Forwarder]] ([http://udhcp.busybox.net/ udhcp])
150: ...Server|DHCP Server]] ([http://udhcp.busybox.net/ udhcp] or [http://thekelleys.org.uk/dnsmasq/doc.html Dn...
474: | align="left" | [[Glossary#Static DHCP|Static DHCP]] - Static DHCP/zh cn (5,604 bytes)
1: {{languages|Static_DHCP}}
2: 首先,英文版本的Static DHCP图片取自V23,落后了,所以一张截图...
3: ...//en.wikipedia.org/wiki/MAC_address MAC地址] 。DHCP服务器确认您网卡的MAC地址并将静态IP...
5: ...服务器一个静态的IP,这可以通过静态DHCP容易。
6: ... v24-sp2 (10/10/09) mega(SVN revision 13064)静态DHCP设置页面,leangjia截图]] - IRC channel/fr (324 bytes)
8: ... se connecter à) internet si les clients sont en dhcp... - DNSMasq as DHCP server/zh cn (9,391 bytes)
1: {{Languages|DNSMasq as DHCP server}}
2: ...CP service [http://udhcp.busybox.net/ "udhcpd"]. uDHCPd uses more RAM than DNSMasq.
4: Using DNSMasq as the sole DHCP server can save you 300kB. With this savings you ...
6: ... local name lookups for any DHCP client, [[Static_DHCP|static]] or dynamic.
8: ...ups require that the router run udhcpc to acquire DHCP leases for the WAN interface. - Buffalo WZR-HP-AG300H (7,851 bytes)
62: ...tatic ip of 192.168.11.2 and either set it to use DHCP or set a static ip of 192.168.1.8
86: ...tatic ip of 192.168.11.2 and either set it to use DHCP or set a static ip of 192.168.1.8 - QoS Filter Definitions (22,324 bytes)
121: ; dhcp - Linksys E4200 (5,611 bytes)
69: ...ait for router to boot up, and then for PC to get DHCP address from the router. - DUAL WAN E2000 / WRT320N (5,123 bytes)
2: ...ur E2000 router works as a "DUAL WAN" Router with DHCP on every WAN port, asumming you have 2 ISP provid... - Hotspot Chillispot (22,966 bytes)
72: ...sting LAN is left completely alone. If you have a DHCP server or some custom corporate setup and you don...
96: ...N Bridge' is disabled, the DD-WRT Device's normal DHCP Server must be off.'''
103: ...n page) of the Web Interface, turn off the DD-WRT DHCP Server.
104: ...virtual LAN interface at 192.168.1.1 and provides DHCP Services again on 192.168.1.x for all your Wirele...
109: #'''DHCP Interface''': select "LAN" this is the bridge bet... - Netgear WNDR4000 (7,463 bytes)
50: * To use DHCP IP assignment, remember to unset the static IP se... - DD-WRTとは何ですか? (57,691 bytes)
123: ...der|DHCP Forwarder]] ([http://udhcp.busybox.net/ udhcp])
135: ...rver|DHCPサーバ]] ([http://udhcp.busybox.net/ udhcp] or [http://thekelleys.org.uk/dnsmasq/doc.html Dn...
459: | align="left" | [[Glossary#Static DHCP|静的DHCP]] - Asus RT-N13U, page 2 (20,356 bytes)
299: '''5. Enable DNSMasq as Sole DHCP Server'''
302: *'DHCP Type' is <b>DHCP Server</b>
303: *'DHCP Server' is <b>Enable</b>
304: *'Use DNSMasq for DHCP' is <b>checked</b>
316: dhcp-range=br1,192.168.16.100,192.168.16.120,255.255.2... - Index:FAQ/ja (48,907 bytes)
66: ...行しているなら、ルータに接続してDHCPサービスがIPアドレスを割り当ててい...
158: == なぜWAN側のIPアドレスをDHCPで取得できないのですか? ==
162: ...ドレスのクローニングをオフにしてDHCPリリースのボタンをクリックすると...
192: ...-WRTファームウェアはデフォルトでは(DHCP経由で)ルータのWANポートからネット...
196: ...ケーブルと衛星ユーザは、一般的なDHCPが正しい設定です。Comcastケーブルユ... - OpenVPN on Dedicated Wireless Access Point (VAP) (7,544 bytes)
83: Down at the bottom of the same screen, in the DHCPd pane, click the add button. Once the page refres...
93: ...sic Setup make sure the boxes for Use DNSMasq for DHCP and Use DNSMasq for DNS are checked. Save setting...
95: ...er the following into Additional DNSMasq Options: dhcp-option=br1,6, 8.8.8.8, 8.8.4.4 - Client Bridged/ru (2,167 bytes)
13: *DHCP Server - Disabled (временно для дос... - Network traffic analysis with netflow and ntop (14,836 bytes)
18: ...omputer must have a static IP address, or using a DHCP static lease.
148: DHCP-BOOTP=67-68 - What is DD-WRT?/fr (53,667 bytes)
136: ...der|DHCP Forwarder]] ([http://udhcp.busybox.net/ udhcp])
148: ...Server|DHCP Server]] ([http://udhcp.busybox.net/ udhcp] or [http://thekelleys.org.uk/dnsmasq/doc.html Dn...
472: | align="left" | [[Glossary#Static DHCP|Static DHCP]] - Linksys WRT54G/GL/GS/GX/fr (7,076 bytes)
18: ...le-ci ait une IP fixe plutôt que paramétrée en DHCP (propriétés TCP/IP). <br> - À propos de DD-WRT (56,213 bytes)
135: ...der|DHCP Forwarder]] ([http://udhcp.busybox.net/ udhcp])
147: ...Server|DHCP Server]] ([http://udhcp.busybox.net/ udhcp] or [http://thekelleys.org.uk/dnsmasq/doc.html Dn...
471: | align="left" | [[Glossary#Static DHCP|Static DHCP]] - Ancienne page d'accueil FR (22,581 bytes)
31: *Assignation DHCP Statique
121: ...lle-ci ait une IP fixe plutôt que paramétré en DHCP (propriétés TCP/IP). <br>
212: [[Static DHCP]]<br /> - FON Failover Router (7,655 bytes)
19: ...The repeater obtains its nameserver settings from DHCP, but doesn't know how to route packets for 192.16...
23: ...was to push the DNS servers to the client through DHCP.
27: ...vers, and those servers pushed to the clients via DHCP, all that we need to do to switch to FON is to ch...
34: kill -STOP `cat /var/run/udhcpc.pid`
41: kill -CONT `cat /var/run/udhcpc.pid` - Additional DNSMasq Options (4,130 bytes)
3: ==DHCP Options==
5: ... (the most common setup). When authoritative, the DHCP server will immediately assign new addresses to c...
6: ** See also: ''-dhcp-authoritative'' in the man page, [https://forum.d...
7: ...ip by returning an address lease in response to a DHCPDISCOVER from a client that also supports Rapid Co...
8: ** See also: ''--dhcp-rapid-commit'' in the [http://www.thekelleys.org.... - FON Hotspot on La Fonera 2013 (5,664 bytes)
19: ...gured for LAN IP address of 192.168.1.2, disabled DHCP server, plugged direct into LAN
61: dhcpif br1 - Repeater Bridge/pt (1,306 bytes)
4: ...gmento pode ter os seus endereços de um servidor DHCP em outro segmento. - Netgear WNR2000v3 (8,712 bytes)
69: The router's DHCP server has been stopped, so you will have to set ... - Netgear WNR2000V3 (9,208 bytes)
62: # The router's DHCP server has been stopped, so you will have to set ... - Optware on K3-AC-ARM/FON Hotspot (6,299 bytes)
43: dhcpif wl0.1
66: == Verify that DHCP works == - Softether on R7000 (17,670 bytes)
147: ...dged straight to the LAN, and VPN clients receive DHCP and DNS from DD-WRT in the usual way. We want the... - Asus RT-AC68U (13,295 bytes)
238: ...rmware, set your network adapter settings back to DHCP. Your computer should pick up an address from the... - OpenSSH on R7000 (22,637 bytes)
146: ...local LAN in the usual way if it requests one via DHCP, and should be able to reach everything on the LA...
148: ... static IP address and routing settings, or run a DHCP client on it to achieve the same via dynamic host...
163: ... a static address and routing, or simply by using DHCP. However, before we change the default route to t...
176: udhcpc -i tap140
178: ... make a DHCP request across the tunnel, receive a DHCP lease from DD-WRT, configure the tap adapter with...
View (previous 250) (next 250) (20 | 50 | 100 | 250 | 500).