Search results

From DD-WRT Wiki

You searched for Hardware/pl

Jump to: navigation, search

For more information about searching DD-WRT Wiki, see Help.

Showing below up to 100 results starting with #101.


View (previous 100) (next 100) (20 | 50 | 100 | 250 | 500).

No page title matches

Page text matches

  1. LaFonera Hardware Second-Antenna (7,482 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Second-Antenna'''
    9: The process should be pretty self explainitory, though I'm sure others may have other th...
    19: ... drill, dremel, etc. Whatever works. Be sure to plan out exactly where it will go. I have chosen to...
    24: ...ng is wiring for a ground. Below that is another plastic casing. Within that is the actual antenna c...
  2. LaFonera Hardware JTAG (268 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    4: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / JTAG'''
    7: For now take a look at [[LaFonera_Hardware_IO_(en)]]
  3. LaFonera Hardware USB (9,766 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / USB'''
    13: ... LaFonera, so read this article first: [[LaFonera_Hardware_Serial-Cable-Port]].
    20: * 1x USB type B PCB socket [http://www.maplin.co.uk/Module.aspx?TabID=1&ModuleNo=43990&doy=12...
    21: * 1x USB type B plug [http://www.maplin.co.uk/Module.aspx?TabID=1&DOY=12m3&ModuleNo=226...
  4. LaFonera Software Chilispot (12,365 bytes)
    17: ...re needed are here and here (only download if you plan to setup a http/ftp server locally, which is ou...
    18: ...nd root.fs build of ddwrt for atheros WiSOC based hardware, I used root.fs and vmlinux.bin.l7 ((06/10/07) st...
    46: ... SSH. This should work with other firmwares, too. Please change the name server according to your ISP ...
    66: 5. Your LaFonera should not be able to completely boot, because the FIS directory will be eras...
    78: ... have the first 8 secs to access to RedBoot via a plain Telnet connection. (I would avoid using the bu...
  5. LaFonera Hardware Power-over-Ethernet (3,201 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Power-over-Ethernet'''
    8: ...e to use DC/DC-converter inside LaFonera. For example RP10-4805SE from [http://www.recom-international...
    12: ...ntical when opened up, same circuit and component placement). This information is based on our experie...
    23: ... attached these pairs to the standard 5V power in plug, in the box where the unit is to be mounted.
  6. LaFonera Hardware Serial-Cable-Port (6,917 bytes)
    1: [[Category:LaFonera_Hardware_(en)]]
    2: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Serial-Cable-Port'''
    7: | [[Image:LaFonera_Hardware_Serial-Cable-Port_01.jpg]]
    17: See [[LaFonera_Hardware_Disassembling|LaFonera Hardware Disassembling]] for how to dissassemble your rout...
    19: [[Image:LaFonera_Hardware_Serial-Cable-Port_02.jpg]]
  7. LaFonera Software Debricking (6,898 bytes)
    18: ...d that’s about it. You can find some [[LaFonera Hardware Serial-Cable-Port | instructions for making a ser...
    24: Then just take your favorite terminal application and connect to serial port using baud rate...
    27: ...er your screen, quickly connect TX line. Other people just tried booting and connecting the serial cab...
    60: I played a little with it but in the end had to ask so...
    66: ...t even go with the TFTP variant. (Thanx to the people in the comments for pointing out the two easier ...
  8. LaFonera Hardware Disassembling (1,764 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Disassembling'''
    8: | [[Image:LaFonera Hardware Disassembling 01.png]]
    11: Included is a 5 v Ac/Dc converter and a simple user manual.
    20: [[Image:LaFonera Hardware Disassembling 02.jpg]]
  9. LaFonera Software Universal-Repeater (25,850 bytes)
    10: I placed the files which are nessesary on my websrver ...
    28: You can change the file and repost it here, to apply more functionality to this script.
    30: ..., but i think some things are not working yet, so please take a look over it to make it working 100%.
    168: # nosbeacon disables the use of hardware beacon timers for ath1
    347: #simply discover strongest external AP dyanamic IP con...
  10. Siemens SE505 (3,810 bytes)
    1: ... follow the guidelines for your specific router. Please see [[Installation]] for more information. R...
    9: ...rivial File Transfer Protocol (TFTP) is a very simple Filetransferprotocol.
    16: ...o this rule. This can be done by yast oder you simply type as root user:
    57: [[Category:Networking hardware tutorials]]
    58: [[Category:Hardware]]
  11. Hardware DIY (1,115 bytes)
    1: {{Languages|Hardware_DIY}}
    3: ==Hardware List==
    5: ...the Hardware link at the bottom of the page. Some hardware mods are located on their router's particular wik...
    13: [[Category:Hardware]]
  12. SES Button (2,058 bytes)
    21: ===Example to test custom button script===
    53: [[Category:Networking hardware]]
  13. LaFonera Hardware Cooling-System (11,159 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Cooling-System'''
    16: ...nd the life of this nifty little unit we shall simply add a clutch looking fan to the top. (how the fa...
    28: *Pliers
    51: 3. After making sure you have the right placement on the cover. Transfer the marked hole and...
  14. LaFonera Software Client-Bridge (9,933 bytes)
    7: ...less interface (from a host router). You can then plug a device (Laptop, PC, Games console, etc) in to...
    11: ...ile shares to be seen in Windows under My Network Places. Your main router also acts as the DHCP issue...
    30: HARDWARE - TESTED INFORMATION (MY CONFIGURATION)
    42: *3. NOTE: after each PAGE - hit APPLY (wait) before going on to next step
  15. LaFonera Hardware Controlling AC-Loads (4,663 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Controlling AC-Loads'''
    13: ...ld process, maybe we could create a controlling application together.
    15: == Hardware ==
    18: [[image:LaFonera_Hardware_Controlling_AC-Loads_-_01_ready_to_start.jpg]]
  16. LaFonera Hardware Roboter Controlling (2,339 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Roboter Controlling'''
    13: ...ld process, maybe we could create a controlling application together.
    15: == Hardware ==
    16: The complete Robot, ready mounted - front view
  17. How to open my router (2,424 bytes)
    19: ..., push straight down and then forward to push the plastic bezel away from the router, as seen in figur...
    34: ...n the halves are approximately ¼ inch apart, the plastic strip and AOSS button will lift away from th...
    38: ...tom half. As you do this, you will see the clear, plastic LED manifold come into view. Carefully lift ...
    52: [[Category:Networking hardware]]
    53: [[Category:Hardware]]
  18. Default internal device network (6,480 bytes)
    10: ...guration works like this ''(parenthesis are pre-N hardware)'':
    12: The internal [[Separate_Lan_and_WLan#Hardware|network switch device]] has 6 [[Switched_Ports|po...
    21: ...r via trunking (note that by extension you can completely isolate a network by ''not'' including port ...
    25: ...d|wireless part of it]], which adds some extra complexity.
    27: ...tween vLan1 ''(vLan0)'' and eth1; rather, '''it employs a [http://linux-net.osdl.org/index.php/Bridge ...
  19. LaFonera Hardware Logo-Removal (2,569 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Logo-Removal'''
    5: ...a_Hardware_Logo-Removal_(de)|deutsch]] [[LaFonera_Hardware_Logo-Removal_(fr)|français]]
    11: ...e way to get rid of the logo without removing any plastic from the top or creating unnecessary scratch...
    23: ...Clean up trace polish (or else it may degrade the plastic) using a damp kitchen towel (dampen with '''...
  20. LaFonera Hardware Replace LEDs (6,702 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...[[:Category:LaFonera_Hardware_(en)|Hardware]] / Replace LEDs'''
    5: ...Replace_LEDs_(de)|deutsch]] [[LaFonera_Hardware_Replace_LEDs_(fr)|français]]
    7: = Replacing the green LEDs =
    8: '''Today we learn how to replace the green LEDs of your LaFonera with blue ones...
  21. JTAG pinouts (4,665 bytes)
    4: ... pinouts with photos are available there. Another place to look is [https://wikidevi.com/wiki/Main_Pag...
    66: [http://wiki.openwrt.org/OpenWrtDocs/Hardware/Buffalo/WBR-G54 WBR-G54 JTAG Info]
    174: ...on if you have to fix the code to match your JTAG hardware<br>
    175: ...r.com/jtagspiravi] with minor modifications and explanation of parallel port jtag to make your own<br>
  22. Serial port pinouts (6,672 bytes)
    4: ... add photos or diagrams, please [[Special:Upload|upload them]] to the wiki, then reference them here u...
    92: NOTE: RevB is completely different hardware, based on Ralink RT3050 SoC. The serial port runs...
    208: [[Category:Hardware]][[Category:Recovery]]
  23. LaFonera (de) (7,731 bytes)
    13: ...=Yast_hardware_info.png | link=:Category:LaFonera_Hardware_(de) | width=48px | height=48px }}
    14: ...ardware]]''' <br/> Dokumentationen bezüglich der Hardware
    16: |style="width:36px;"|{{Click || image=Playground.png | link=LaFonera_TestingArea_(de) | wi...
    64: Die kompletten Quelltexte sollten sich im SVN befinden, abe...
    84: * SD/MMC kernel module for [[LaFonera_Hardware_SD-Card|LaFonera SD-Card hack]] - (SD/MMC Driver)
  24. LaFonera (fr) (6,073 bytes)
    13: ...=Yast_hardware_info.png | link=:Category:LaFonera_Hardware_(fr) | width=48px | height=48px }}
    14: |'''[[:Category:LaFonera_Hardware_(fr)|LaFonera Hardware]]''' <br/> Documentation à propos du matériel
    16: |style="width:36px;"|{{Click || image=Playground.png | link=LaFonera_TestingArea_(fr) | wi...
    17: |'''[[LaFonera_TestingArea_(fr)|Playground]]''' <br/> Zone de test
    34: ...re, celles ci-dessus sont reconnus pour être les plus stables et les moins buggées par les utilisate...
  25. LaFonera Hardware Logo-Removal (de) (2,955 bytes)
    2: [[Category:LaFonera_Hardware_(de)]]
    3: ...Fonera_(de)|LaFonera]] / [[LaFonera_Hardware_(de)|Hardware]] / Logo-Entfernung'''
    5: ...a_Hardware_Logo-Removal_(de)|deutsch]] [[LaFonera_Hardware_Logo-Removal_(fr)|français]]
    11: ...ffektivste Weg um das Logo zu entfernen, ohne die Plastikoberfläche Deiner LaFonera zu beschädigen o...
    24: ...en der Politur mit einem feuchten Tuch, damit das Plastik nicht angegriffen wird
  26. LaFonera Hardware Logo-Removal (fr) (2,529 bytes)
    2: [[Category:LaFonera_Hardware_(fr)]]
    3: ...Fonera_(fr)|LaFonera]] / [[LaFonera_Hardware_(fr)|Hardware]] / Logo-Removal'''
    5: ...a_Hardware_Logo-Removal_(de)|deutsch]] [[LaFonera_Hardware_Logo-Removal_(fr)|français]]
    11: ...e way to get rid of the logo without removing any plastic from the top or creating unnecessary scratch...
    23: ...Clean up trace polish (or else it may degrade the plastic) using a damp kitchen towel (dampen with '''...
  27. LaFonera Hardware 32MB SDRAM MOD (5,063 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / 32MB SDRAM MOD'''
    19: ==Removing and replacing ram chips on the Fonera==
    23: ... keep the chip on when a little bit of force is applied to the chip. The legs will 'pop' from the pads...
    25: Get a sample ChipQuik SMD removal kit. It includes flux and s...
  28. LaFonera Hardware Replace LEDs (de) (6,319 bytes)
    1: [[Category:LaFonera_Hardware_(de)]]
    2: ...onera]] / [[LaFonera_Hardware_(de)|Hardware]] / Replace LEDs'''
    4: ...Replace_LEDs_(de)|deutsch]] [[LaFonera_Hardware_Replace_LEDs_(fr)|français]]
    12: I think it is very simple to do this modification - if you have some solde...
    28: [[image:LaFonera_Hardware_Replace_LEDs_-_08_preparation.jpg]]
  29. LaFonera Hardware Replace LEDs (fr) (5,848 bytes)
    2: [[Category:LaFonera_Hardware_(fr)]]
    3: ...onera]] / [[LaFonera_Hardware_(fr)|Hardware]] / Replace LEDs'''
    5: ...Replace_LEDs_(de)|deutsch]] [[LaFonera_Hardware_Replace_LEDs_(fr)|français]]
    7: = Remplacer les LEDs vertes =
    8: '''Aujourd'hui nous allons voir comment remplacer les LEDs vertes de LaFonera par des bleues.''...
  30. LaFonera Hardware Power from USB (8,045 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Power from USB'''
    6: ...hat limited by its power supply which needs to be plugged into a wall power socket. Wouldn’t it be n...
    8: As we know from looking at the hardware specifications for the LaFonera, it takes DC powe...
    10: This mod is quite simple; it requires no modification to the LaFonera, ju...
  31. LaFonera Hardware New Paint Job (1,237 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / New Paint Job'''
    8: This is '''SIMPLE''' mod. It shouldn't take you more then 2 Hours ...
  32. LaFonera Hardware IO (en) (4,576 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / IO'''
    9: ...the time to make a schmatic of the LaFonera yet? Please fill in the
    13: ...: http://wiki.openwrt.org/OpenWrtDocs/Customizing/Hardware/JTAG_Cable and here: http://tech.am/2006/10/06/au...
    15: ... Reset TAP in Atheros AR2315 (from: Multiple sources)
  33. Linksys WRT300N v1, v1.1 (6,576 bytes)
    7: * Hardware Defaults (with Linksys firmware)
    17: ==Hardware Information==
    35: # Plug a lan cable from your computer to a LAN port on...
    55: # Plug a lan cable from your computer to a LAN port on...
    78: ...''wait at least 5 minutes''' for the router to complete flashing and rebooting
  34. LaFonera Hardware Modding (636 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Modding'''
    7: [[Image:LaFonera_Hardware_Modding_-_01_front.jpg]]
    9: [[Image:LaFonera_Hardware_Modding_-_02_side.jpg]]
    11: [[Image:LaFonera_Hardware_Modding_-_03_ahead.jpg]]
  35. SD/MMC mod (263 bytes)
    6: [[Category:Hardware]]
  36. Linksys WRT54G2 v1.0 (18,520 bytes)
    5: ==Hardware==
    36: ...w.dd-wrt.com/phpBB2/viewtopic.php?t=52876 blank apply.cgi issue]
    46: ... installed, other micro, [[Micro-plus]], or micro-plus_ssh versions can be flashed. For description of...
    47: ...p=1090693#1090693 here]. 18946 was the last micro-plus (currently not available), so for newer builds ...
    52: ... This has been confirmed by at least two other people.
  37. 安装 (16,952 bytes)
    13: ...specific]] page to '''accurately''' identify your hardware and not create a problem that renders your router...
    15: ...gotten some background on the peacock page, the [[Hardware-specific]] page may be the most useful page for y...
    18: * Use the '''brand-specific information in the [[Hardware-specific]]''' page to accurately identify which m...
    19: ... and find the files you need. Again, check the [[Hardware-specific]] page for links to detailed instruction...
    23: ...8 for instance). Use the "_mini" firmware if your hardware has 4 MB or more of flash (WRT54GL for instance)....
  38. 硬件专用信息 (4,351 bytes)
    1: {{Languages|Hardware-specific}}
    2: ... follow the guidelines for your specific router. Please see [[Installation]] for more information. R...
    4: Please also see in [[:Category:Networking hardware tutorials]]
    6: ...Hardware-Specific|Main Page Hardware-specific]] explanations. This has been condensed from a longer f...
    8: =Hardware Brand=
  39. LED Scripts (37,693 bytes)
    11: '''The example LED scripts below are usually written using the ...
    41: ...6" will completely erase your NVRAM (i.e. do a complete reset on your router)
    370: ==Display Load via LED (load.sh)==
    371: * Uses front button LED to display current load on router.
    433: Modified Script for simple display of cpu usage/load -- I use the power LED
  40. Прошивка WL-500W (10,168 bytes)
    160: [[Category:Networking hardware tutorials/ru]]
  41. Прошивка WL-500W с подробными скрин-шотами (10,274 bytes)
    171: [[Category:Networking hardware tutorials/ru]]
  42. Linksys E2100L (2,608 bytes)
    1: ===Hardware Information===
    59: '''Please see "[[Firmware_FAQ#Which_router_should_I_buy...
    66: #Wait until the router has completely finished flashing and rebooting (~5-10 minut...
  43. Linksys E800 (3,220 bytes)
    1: =[https://wikidevi.wi-cat.ru/Linksys_E800 Hardware Information]=
    52: # Power cycle by unplugging the E800 for 10 seconds.
    53: # Plug the E800 back in and wait about 2 minutes until...
    65: #Apply Settings
  44. Main Page (1,889 bytes)
    1: {{Template:Welcome}}
    27: |{{Click || image=development.jpg | link=Hardware_DIY| width=48px | height=48px }}
    28: |'''[[Hardware DIY]]''' <br/> Hardware tutorials, JTAG, serial port, how to open, ...
  45. LaFonera Hardware Controlling AC-Loads via webinterface (4,497 bytes)
    1: [[Category:LaFonera_Hardware_(en)]]
    2: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Controlling AC-loads via web-interface'''
    31: : [[Image:LaFonera_Hardware_Controlling_AC-Loads_via_webinterface_-_04_overvi...
    40: : [[Image:LaFonera_Hardware_Controlling_AC-Loads_via_webinterface_-_05_web-in...
    46: : [[Image:LaFonera_Hardware_Controlling_AC-Loads_via_webinterface_-_06_web-in...
  46. Installation/fr (33,890 bytes)
    2: ... avec DD-WRT - ainsi que des informations qui s'appliquent à tous les routeurs.
    4: ==Choisir le bon logiciel embarqué - '''De la plus haute importance'''==
    14: ...ions spécifiques le concernant sur la page '''[[Hardware-specific/fr|Spécificités matérielles]]'''. N...
    17: ...inées à ceux qui rencontrent des problèmes. Le plus souvent, sauter cette étape conduit de nombreu...
    19: ...ock '' et l'information disponible dans la page [[Hardware-specific| Spécificités matérielles]] pour iden...
  47. Fr:materiel (2,134 bytes)
    1: ==Modifications Hardware==
    39: Pour plus d'informations, rendez-vous sur cette page [htt...
  48. Optware, the Right Way (36,809 bytes)
    9: ...ndex.php/OTRW2_%28Optware_the_right_way_Take_2%29 please go here]'''<br></big>
    40: *'''Network printing with Watchprinter''' - Plug a USB printer into your router and let anyone o...
    48: ...e information regarding what it does and how to implement NFS can be found here: http://www.dd-wrt.com...
    50: *'''Xinetd''' - A replacement for inetd, the internet services daemon. ...
    60: ...u can redirect some webrequests (for adds for example) to pixelserv. http://proxytunnel.sourceforge.n...
  49. LaFonera Hardware SD-Card/Reader Position (6,152 bytes)
    1: ...ry:LaFonera_Hardware_(en)|Hardware]] / [[LaFonera Hardware SD-Card|SD-Card]] / Reader Position'''
    5: [[Image:Fonera_card_reader_complete-top.jpg|thumb|center|658px|Fonera with a blue ...
    10: ...ad both) card reader to take apart, or [[LaFonera_Hardware_SD-Card#Cheap_SD_Card_.22reader.22_.28floppy_cabl...
    13: ...ng Glue (epoxy resin or similar) OR Self adhesive plastic for a temporary solution.
    16: ...fe/Utility knife with a blade sutable for cutting plastic.
  50. WHR-HP-AG108 (13,246 bytes)
    10: ==Hardware==
    20: ...e=Exhibits&RequestTimeout=500&calledFromFrame=N&application_id=600453&fcc_id=%27FDI-09101540-0%27 FDI-...
    23: ... than WRT54G's), and its output level is fixed in hardware at 12 dBm. You may want check out [https://fjallf...
    51: ...* Start and point your tftp program to the proper place
    53: ...' when diagnostic red led comes on after unplug/repluging
  51. USB (11,810 bytes)
    19: * plus many newer routers
    21: Note: If the router hardware has a USB port, dd-wrt probably supports it. It m...
    23: ...ces. See [[USB storage]] for instructions and example scripts.
    25: ...ng on capability, but the ability to add external hardware easily makes these far more powerful units.
    29: ...g [[Samba]]; an external hard drive also provides plentiful swap space for use as virtual memory.
  52. Linksys WRT55AG v2.0 (614 bytes)
    3: ...the forum. Specs I gathered are in the 'supported hardware' matrix unless whoever redid that on 13 MAY 2010 ...
  53. Linksys E1550 (3,454 bytes)
    5: =Hardware Information=
    53: # Power cycle by unplugging E1550 for 10 seconds.
    54: # Plug the E1550 back in and wait about 2 minutes unti...
  54. Linksys E1500 (7,663 bytes)
    3: =Hardware [https://wikidevi.com/wiki/Linksys_E1500 Informat...
    49: # Power cycle by unplugging the E1500 for 10 seconds.
    50: # Plug back in then wait about 2 minutes until it fini...
    57: ...1100282#1100282 KRACK fixes] for Broadcom were completed in [http://svn.dd-wrt.com/?from=Nov+4%2C+2017...
    67: ...are Upgrade" screen, which is a web interface to upload a firmware using a TFTP server built into the ...
  55. Linksys E900 (3,213 bytes)
    1: =[https://wikidevi.wi-cat.ru/Linksys_E900 Hardware Information]=
    52: # Power cycle by unplugging the E900 for 10 seconds.
    53: # Plug the E900 back in and wait about 2 minutes until...
    65: #Apply Settings
  56. Broadcom detection (3,378 bytes)
    9: ...to start" & "Compatibility" work for every device/hardware, except the cfe and nvram grabbing stuff.
    23: Please do the following check list and if one point ...
    49: ...r initial flash and it will not brick your router please give us cfe which is quite easy as you see he...
    77: Plz only report the gpio that changes. :-)
    105: [[Category:Networking hardware]]
  57. LaFonera Hardware LCD Screen (3,119 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / LCD Screen'''
    9: [[Image:LaFonera_Hardware_LCD_Screen_-_01_fonera_LCD.jpg]]
    12: ...e because of playing with IR receiver. So why not playing with serial 128*128 LCD ?
    14: ...nd animations. The uLCD model can only display simple stuff (line, cercle, text) and pixel after pixel...
  58. LaFonera Hardware IR Receiver (4,545 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / IR Receiver'''
    8: ...er, a diode, a resistor and a78L05 regulator as explained here. But this wont work with USB/serial ada...
    10: ... used with USB/serial and embedded system with simple serial port like… La Fonera.
    13: [[Image:LaFonera_Hardware_IR_Receiver_-_01_pcb.jpg]]
  59. LaFonera Hardware LaFoneraPlus (12,883 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...egory:LaFonera_Hardware_(en)|Hardware]] / LaFoneraPlus'''
    6: = LaFonera Plus =
    7: There is a new Fon router : La fonera+ (plus). This router is quite similar than the classic...
    10: [[image:LaFonera_Hardware_LaFoneraPlus_-_01_case.jpg]]
  60. WRT54GL MAX232 Serial (6,868 bytes)
    3: ...licable to several other models based on the same hardware (WRT54G line et all). The MAX232 is a level conve...
    9: ...s of the WRT54G line include two serial ports, complete with pinholes on the circuit board. These oper...
    13: ...rt 3 pairs of pins. Be careful, the pin out is completely different than Max232: check data sheet.
    15: ...An other interesting feature is the "AutoShutDown Plus" circuitry that can decrease the power consumpt...
    21: ... and does the job nicely. I considered using a simple zenner regulator, but from what I've seen the wa...
  61. PC-Engines (12,674 bytes)
    4: ...sed on the AMD Geode LX700/800 cpu's which are simple [http://www.dd-wrt.com/wiki/index.php/X86 x86] c...
    19: ...or just simply drag-and-drop the image file onto the physdiskwr...
    29: ...ding using the webinterface too. for new install, please use the .image files
    36: if your ethernet interface is not detected, please login using the serial console and write me t...
    54: ...dditionally this version is capable of using multiple cpu's
  62. Hashes (98 bytes)
    3: <noinclude>[[Category:Flashing networking hardware]]</noinclude>
  63. Ddadder (757 bytes)
    9: ==Supported Hardware==
  64. TFTP flash (16,402 bytes)
    6: #Unplug the router, get a [[#TFTP Tools|TFTP client]] f...
    12: #Plug in the router and start the TFTP client '''as s...
    13: #*TTL=64 means application code has been reached. If the router isn't...
    17: ...G Deluxe), need additional steps to perform a complete and proper initial flash. See this wiki page: ...
    23: ...ple TCP/IP implementations that don't have CTCP implemented: Windows XP or Linux are reported to work,...
  65. Italian (1,683 bytes)
    1: {{Template:Welcome}}
    27: |{{Click || image=development.jpg | link=Hardware_DIY| width=48px | height=48px }}
    28: |'''[[Hardware DIY]]''' <br/> Hardware tutorials, JTAG, serial port, how to open, ...
  66. Changelog (7,371 bytes)
    5: The following is an incomplete summary of the changes since DD-WRT v23 SP2 (w...
    21: ** Multiple WLAN/SSID
    22: ** Multiple BSSID (different MACs for virtual interfaces)
    32: ** monitor multiple interfaces
    75: * this list is an incomplete summary of the changes since DD-WRT v23 SP2
  67. Gateworks Avila GW234x (30,744 bytes)
    3: ...he help send to me (and the patience he has) to explain many things about this topic (and others).
    64: ...to change cable to another GW234X device (for example).
    75: ...en the GW234X is answering the pings and plug-off/plug-on the power to the GW234X.
    90: ...COM with the default values: 115200,8,N,1 without hardware/software flow control.
    96: 4) Plug-off and plug-on the power to the GW234X.
  68. Linksys WRT1900AC (7,260 bytes)
    4: ...ilar that these instructions will probably also apply to the other versions, but it's not guaranteed.
    43: * If you do not plan to use the 5GHz wifi band, turn it off by addin...
    48: ...tion-part-3-channel-dilemma/438580919 DFS page] explains. Basically, the only usable ones are channels...
    50: ... also increase noise. The DFS page linked above explains channel width well. You'll have to see how ma...
    59: '''Example Settings:'''
  69. Repeating Mode Comparisons (6,438 bytes)
    7: Please note that some lines still require confirmati...
    8: ...nd your results differ from those indicated here, please add comments providing your HW and DD-WRT ver...
    17: ...(requires access) and requires a compatible WDS implementation. R/RB only needs to configure the repea...
    18: ...with wrt150n1.1 AP + wrt54g6 R] (TODO: test other hardware). R/RB support all encryption algorithms.
    19: ... by SSID. Both WDS and R support connecting multiple repeaters in series ("repeat a repeater"), howev...
  70. Linksys (267 bytes)
    1: ...Category:Networking hardware tutorials|Networking hardware tutorials]] pages for further info.
  71. Watchguard Firebox II (9,880 bytes)
    6: ...ebox III and Firebox x700 as well, due to similar hardware designs. In this guide, I assume that you have so...
    20: ...Integrated_Drive_Electronics IDE] hard drive, but please be aware of the limitations of hard disk spac...
    23: ...aving no noise coming from the router can be accomplished by this as well.
    27: ...o 12 volts supply in these routers. They can be replaced with an equivalent, but if you want absolute ...
    31: ... to the registered version of DD-WRT x86 as well. Please read the notes below on how to clone a mac ad...
  72. Netgear R6400v1 (2,598 bytes)
    5: ==Hardware [http://techinfodepot.shoutwiki.com/wiki/Netgear_...
    6: The hardware is almost identical to a Netgear R6300v2, but has...
    53: ...elect the factory reset option from the firmware upload GUI drop-down menu:<br>
    58: **Select radio button, then ''Apply'' settings
  73. Netgear R7000P (2,672 bytes)
    1: ==Hardware [http://techinfodepot.shoutwiki.com/wiki/Netgear_...
  74. Asus RT-AC56U (3,895 bytes)
    1: =[https://wikidevi.com/wiki/ASUS_RT-AC56U Hardware] Specifications=
    16: *Power Supply: 19V (DC) @ max 1.75A
    18: ...47081A0), has 128 MiB RAM, and different power supply. There is no evidence that it is supported at a...
    22: Example: [ftp://ftp.dd-wrt.com/betas/2017/12-29-2017-r34...
    42: #Plug the computer running the ASUS recovery tool int...
  75. Repeater Bridge/fr (12,531 bytes)
    23: Mode d'emploi pas à pas pour configurer le routeur sous DD-W...
    64: ...un mode de sécurité activé (WPA,WEP etc...), appliquer les instructions ci-dessous, sinon, aller au...
    79: #* Cliquer sur appliquer.
    80: # Les nouveaux paramètres sont appliqués et le routeur doit redémarrer. La connexio...
    81: ..., ce qui est utile pour faire des essais avant le placement définitif du routeur secondaire).
  76. Repeteur sans fil (12,493 bytes)
    20: Mode d'emploi pas à pas pour configurer le routeur sous DD-W...
    61: ...un mode de sécurité activé (WPA,WEP etc...), appliquer les instructions ci-dessous, sinon, aller au...
    76: #* Cliquer sur appliquer.
    77: # Les nouveaux paramètres sont appliqués et le routeur doit redémarrer. La connexio...
    78: ..., ce qui est utile pour faire des essais avant le placement définitif du routeur secondaire).
  77. Linksys WRT600N (4,396 bytes)
    3: ====Hardware Specs====
    56: Simply reset and flash the stock image via TFTP or thro...
    66: Plug the router in and nearly simultaneously hit the...
    67: ...omplete before hard reboot (physically unplug & replug). The router might not do anything so be patien...
  78. Asus WL-520GU (18,825 bytes)
    10: ..., then you may experience problems with certain applications; albeit those mainly include resource int...
    18: # Windows Client (TFTP firmware upload techniques when booting the WL-520GU will also...
    30: ..._asus.trx build is supposed to be designed to be uploaded as a firmware upgrade through the ASUS stock...
    43: ...nd. This puts the router into restoration mode. Plug a cable in the LAN port of the router, and the ...
    57: ...me), you can upload your file with tftp again. I uploaded the dd-wrt.v24_voip_generic.bin successfully...
  79. Linksys WAP54G (10,094 bytes)
    1: [[Linksys WAP54G Hardware Spec]]
    11: .....one simple but not permanent, and one not so simple but permanent.
    28: '''Example of startup script for a V1:'''
    34: '''Example of startup script for a V2.0:'''
    39: '''Example of startup script for a V3.X:'''
  80. LaFoneraPlus Software Flashing (10,090 bytes)
    4: ...gory:LaFonera_Software_(en)|Software]] / LaFonera Plus Initial Flashing'''
    17: ...dd-wrt I throw at it. I don't know if it's due to hardware or that it's less supported than my fon2100a/b/c ...
    29: #*Simple TFTP server for Windows: http://www.jounin.net/t...
    30: #*If you're running Linux, here's the simplest cross-distribution way to setup a TFTP server:
    47: You need to connect to your FoneraPlus using redboot
  81. X86 (8,329 bytes)
    3: ...sting very small low power industrial embedded PC plattforms e.g. the very popular [[PC-Engines|PC-Eng...
    5: == Applications ==
    7: ...at least, escape many of the limitations of small platforms.
    57: For example, we'll use: <br>
    75: * The adequade *.image from below fitting your plattform and needs
  82. Netgear WGR614 v8.0 & WGR614L (7,509 bytes)
    5: ...the two device names can be used interchangeably. Please note that to load firmware on this device it ...
    35: Most of the Broadcom hardware uses a TRX style firmware. Netgear's WGR614L Linu...
    75: ... new file "kernel_rootfs_image.chk" which can be uploaded to WGR614L using its Web UI or if you got th...
    137: ...ter you bring it back from the dead you can start playing with firmware again but not now!
    141: ... in the board itself after tining the wires and applying flux.
  83. Linksys WRT54GL (7,215 bytes)
    6: =Hardware [https://wikidevi.com/wiki/Linksys_WRT54GL_v1.1 S...
    7: *'''Platform''': Broadcom MIPS
    56: ...nterrupt the process until you are sure it has completed.
    65: #*# Wait again for the process to complete and the lights to return to normal (3-5 minute...
    70: ... in the name is required, which has a header with hardware info.
  84. Switch (3,590 bytes)
    6: ...can configure most DD-WRT capable routers as a simple 4 or 5 port switch. A switch is similar to a hu...
    50: ...ect ethernet cable to main router via LAN-to-LAN uplink*
    53: ...the TX power to 5mW or so. It may help keep your hardware temps cooler.
  85. Netgear WAG 102 (7,486 bytes)
    6: ==Hardware==
    237: ...e >[http://www.dd-wrt.com/wiki/index.php/LaFonera_Hardware_Serial-Cable-Port Fonera Serial Cable]<BR>
  86. Antenna mods (254 bytes)
    1: ...ennas]] (WIP - Work In Progress, and should be completed in the very near future.)
    5: [[Category:Hardware]]
  87. Accton Software Flashing (14,547 bytes)
    6: ==Hardware==
    24: ...P file server] on your Windows machine (it's a simple no-installer-needed HTTP server). If the link do...
    26: ...x.bytesex.org/misc/webfs.html webfs] as well. [Simple alternatives welcome]
    29: #*Simple TFTP server for Windows: http://www.jounin.net/t...
    30: #*If you're running Linux, here's the simplest cross-distribution way to setup a TFTP server:
  88. SENAO EOC-2610 (2,810 bytes)
    11: =Hardware=
    13: *Ubiquity Nanostation2 clone with better hardware.
    32: ...d push the hardware switch to ext. Now the rp-sma plug is active
    35: ...ou can solder RP-SMA connectors onto the internal plugs.
    59: ...; it may take a few seconds before the page is completely loaded by your web-browser.
  89. Bonding (4,814 bytes)
    8: =Samples=
    10: This is a description to setup a sample p2p-bridge with 2 bonded interfaces. <br>
    55: ...ggregation groups that share the same speed and duplex settings. Utilizes all slaves in the active agg...
    58: ...n the base drivers for retrieving the speed and duplex of each slave.
    69: ... the bond such that different peers use different hardware addresses for the server.
  90. Buffalo N450 (831 bytes)
    1: == Hardware Information ==
  91. Linksys WRT350N (2,519 bytes)
    3: ===Hardware===
    22: # Plug a cable into the LAN port of the router and you...
  92. Advanced wireless settings/ja (51,292 bytes)
    81: ...to 802.11n are antenna diversity and spatial multiplexing. MIMO technology relies on multipath signals...
    83: ...or each MIMO antenna which translates to higher implementation costs compared to non-MIMO systems.
    117: ... very high level summary of the process when multiple devices are connected to an access point, they c...
    125: ...e are a few examples of what triggers CTS to be employed by the dd-wrt router software.
    129: ...ts require using CTS protection mode. This will apply the CTS protection mechanism on both 20 MHz halv...
  93. Upgrade from openwrt (743 bytes)
    5: Replace your firware image referenced below with the c...
    23: [[Category:Flashing networking hardware]]
  94. Triggertftp (1,465 bytes)
    49: [[Category:Flashing networking hardware]]
  95. Actiontec MI424WR (12,063 bytes)
    13: ...2/viewtopic.php?t=23514 here] for info on radio replacements
    18: ... stock ROM and Jungo loader will not allow us to upload the DD-WRT directly, using Python, we flash th...
    24: ...t search field. Select the desired linux.bin and place it in your TFTP server.
    36: ...port of the router and reboot the router. Rev. D: plug into LAN port.
    39: This is a sample screen output of the procedure while doing the a...
  96. 其它 (969 bytes)
    5: ...efinitions and considerable explanations. A great place for reference and general browsing.
    9: There are some pages that describe specific hardware with only loose
    20: * [[Hardware#NVRAM|NVRAM]]
    22: * [[Hardware#Overclocking|路由器超频]]
    24: * [[Hardware#Hardware_Modifications|硬件改造]]
  97. D-Link DIR-300 rev A (6,603 bytes)
    8: ...dure below is valid only for DIR-300 Revision A. Please check carefully the revision level of your D-...
    21: plugoff the power cord and replug it. You must press the RESET key for 5 sec.
    31: ...ow start a local tftp server on your computer and place ap61.ram as well as ap61.rom in the root dir o...
    36: ...oader should start. (on serial console it will display some warning. but you dont need to care about)....
    37: ...o be available at 192.168.1.2). Now you should be pluging on to any of the lan ports. Then connect via...
  98. PXE (2,146 bytes)
    2: ...ww.igel.com/ IGEL], [http://www.wyse.com/products/hardware/thinclients/ WYSE] , [DisklessWorkstations.com], ...
    4: ...de significant power savings, extended hardware replacement intervals, and centralized management.
    7: ...ss may be able to leverage the reliability and simplicity of embedded WRT devices over running DHCP se...
  99. Linksys RV042 (2,356 bytes)
    7: =Hardware=
    23: Hardware : Intel IXP425 IXDP425<br>
  100. Configure Samba in Linux (2,749 bytes)
    108: [[Category:Flashing networking hardware]]

View (previous 100) (next 100) (20 | 50 | 100 | 250 | 500).



Search in namespaces:

List redirects
Search for