Spanning Tree Protocol

From DD-WRT Wiki

Revision as of 03:48, 14 December 2006 by Whiteboy (Talk | contribs)
Jump to: navigation, search

The Spanning Tree Protocol (STP) is a protocol that tries to find the best route to use when multiple routes are available to the same distination. In these cases, mesh networks without STP enabled begin to experience Loopback. The need for STP occurs when your router is being used in a mesh network with multiple WDS-enabled repeaters, or in an adhoc network with multiple adhoc connections.

If your router is not being used in either of the given scenarios, then likely STP is not necessary. Therefore, it is recommended that you disable it.

User's of Comcast Cable should always disable this option and leave it disabled, as STP conflicts with the routers DHCP client for the WAN connection. (Comcast Cable Problem Only)

External Links

http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/sw_ntman/cwsimain/cwsi2/cwsiug2/vlan2/stpapp.htm