Settings

From DD-WRT Wiki

Revision as of 17:07, 13 November 2017 by Ian5142 (Talk | contribs)
Jump to: navigation, search

Multiple links on this site refer to important settings required for a successful flash. See the Glossary for unfamiliar terms. Also, wireless settings are described here: Basic Wireless Settings and here: Advanced Wireless Settings.

Contents

Disable Wireless

  1. You must disable wireless during almost any modem firmware changes. Simply logging off your wireless will not work.
    1. Go to Network Connections (Vista: Control Panel->Network and Internet -> Network Connections).
    2. Double click on Wireless Internet Connection and hit Disable at the bottom of the screen.


Hard Reset or 30/30/30 Reset

Ping

  1. Go to the cmd screen (Windows: go to lower left of your screen, hit the icon ("Start" or a circle) and write CMD in the input/search area right above your cursor. A black screen will emerge).
  2. To ping a modem, enter "ping 192.168.1.1" (or whatever the modem should be). Hit enter.

Power Cycle

  • Simply means unplugging your router, waiting about 10 seconds, and plugging it back in.