Settings

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 17:07, 13 November 2017 (edit)
Ian5142 (Talk | contribs)

← Previous diff
Revision as of 17:18, 13 November 2017 (edit) (undo)
Ian5142 (Talk | contribs)
(Power Cycle)
Next diff →
Line 14: Line 14:
#Go to the cmd screen (Windows: go to lower left of your screen, hit the icon ("Start" or a circle) and write CMD in the input/search area right above your cursor. A black screen will emerge). #Go to the cmd screen (Windows: go to lower left of your screen, hit the icon ("Start" or a circle) and write CMD in the input/search area right above your cursor. A black screen will emerge).
#To ping a modem, enter "ping 192.168.1.1" (or whatever the modem should be). Hit enter. #To ping a modem, enter "ping 192.168.1.1" (or whatever the modem should be). Hit enter.
- 
-==Power Cycle== 
-*Simply means unplugging your router, waiting about 10 seconds, and plugging it back in.  
[[Category:Settings| ]] [[Category:Settings| ]]

Revision as of 17:18, 13 November 2017

Multiple links on this site refer to important settings required for a successful flash. See the Glossary for unfamiliar terms. Also, wireless settings are described here: Basic Wireless Settings and here: Advanced Wireless Settings.

Disable Wireless

  1. You must disable wireless during almost any modem firmware changes. Simply logging off your wireless will not work.
    1. Go to Network Connections (Vista: Control Panel->Network and Internet -> Network Connections).
    2. Double click on Wireless Internet Connection and hit Disable at the bottom of the screen.


Hard Reset or 30/30/30 Reset

Ping

  1. Go to the cmd screen (Windows: go to lower left of your screen, hit the icon ("Start" or a circle) and write CMD in the input/search area right above your cursor. A black screen will emerge).
  2. To ping a modem, enter "ping 192.168.1.1" (or whatever the modem should be). Hit enter.