Settings

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 17:03, 13 November 2017 (edit)
Ian5142 (Talk | contribs)
(Disable Compound TCP)
← Previous diff
Revision as of 17:03, 13 November 2017 (edit) (undo)
Ian5142 (Talk | contribs)
(Enable TFTP)
Next diff →
Line 14: Line 14:
##Double click on Wireless Internet Connection and hit Disable at the bottom of the screen. ##Double click on Wireless Internet Connection and hit Disable at the bottom of the screen.
-==Enable TFTP==+ 
-*Wise to do even if you do not intend to use it; if the web GUI goes down, you may have to. See [[TFTP flash#TFTP Tools]].+
==Hard Reset or 30/30/30 Reset== ==Hard Reset or 30/30/30 Reset==

Revision as of 17:03, 13 November 2017

Multiple links on this site refer to important settings required for a successful flash. In addition, they ask users to use what may be unfamiliar terms. Here is an explanation of some of them. Please also see Security. Thank you - clock.





Contents

Disable Wireless

  1. You must disable wireless during almost any modem firmware changes. Simply logging off your wireless will not work.
    1. Go to Network Connections (Vista: Control Panel->Network and Internet -> Network Connections).
    2. Double click on Wireless Internet Connection and hit Disable at the bottom of the screen.


Hard Reset or 30/30/30 Reset

Ping

  1. Go to the cmd screen (Windows: go to lower left of your screen, hit the icon ("Start" or a circle) and write CMD in the input/search area right above your cursor. A black screen will emerge).
  2. To ping a modem, enter "ping 192.168.1.1" (or whatever the modem should be). Hit enter.

Power Cycle

  • Simply means unplugging your router, waiting about 10 seconds, and plugging it back in.