Serial port pinouts

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 10:24, 30 July 2007 (edit)
Anectine17 (Talk | contribs)
(Buffalo WHR-HP-G54)
← Previous diff
Revision as of 20:44, 19 August 2007 (edit) (undo)
Star (Talk | contribs)

Next diff →
Line 63: Line 63:
| tx1 o o tx0 | tx1 o o tx0
| rx1 o o rx0 | rx1 o o rx0
 + | J5
 +
 +==Sparklan WX6615GT==
 + |    o
 + | gnd o o rx
 + | gnd o o
 + | vcc o o
 + | vcc o o tx
| J5 | J5
==External Links== ==External Links==
*[http://www.dd-wrt.com/phpBB2/viewtopic.php?t=12879 Original source of this page on the DD-WRT forums] *[http://www.dd-wrt.com/phpBB2/viewtopic.php?t=12879 Original source of this page on the DD-WRT forums]

Revision as of 20:44, 19 August 2007

If anyone has any photos or diagrams, please upload them to the wiki (NOT link to an external image) and add them to this page.

Contents

For those interested: (--------- is nearest board edge)

Buffalo WBR2-G54(S)

----------
J5
o gnd
o vcc
o rx
o tx

Motorola WR850G v2 /v3

| tx o o vcc  RJP1
|    o o
|    o o gnd
| rx o o
|    o

Buffalo WLA2-G54C

| tx o o
|    o o vcc
|    o o gnd
| rx o o
|    o
---------

Buffalo WHR-G54S

Connector RJP1

 tx o o      |
    o o vcc  |
    o o gnd  |
 rx o o      |
    o        |
-------------

The serial port runs at 115200 baud, 8 bits, no parity, 1 stop bit using ANSI terminal emulation.

Buffalo WHR-HP-G54

Connector J1

             |
      rx o   |
      tx o   |
     gnd o   |
     vcc o   |
-------------

The serial port runs at 115200 baud, 8 bits, no parity, 1 stop bit using ANSI terminal emulation.

Linksys WRT-54G(S)

JP1 or JP2 (on newer models)

vcc o o vcc |
tx1 o o tx0 |
rx1 o o rx0 |
    o o     |
gnd o o gnd |

Asus WL-500 deluxe

|     o o
| gnd o o vcc
| tx1 o o tx0
| rx1 o o rx0   
|        J5

Sparklan WX6615GT

|    o
| gnd o o rx
| gnd o o 
| vcc o o 
| vcc o o tx   
|        J5

External Links