Separate WLANs
From DD-WRT Wiki
(Difference between revisions)
Revision as of 13:13, 30 April 2010 (edit) Glenn (Talk | contribs) (catchg) ← Previous diff |
Current revision (17:51, 11 March 2018) (edit) (undo) Ian5142 (Talk | contribs) (Remove white space.) |
||
(5 intermediate revisions not shown.) | |||
Line 1: | Line 1: | ||
- | This | + | '''NOTE: This is an old unmaintained and duplicate guide. You should use one of the following currently maintained guides instead.''' |
- | + | To separate the WLAN from the LAN see: [[Separate LAN and WLAN]] | |
- | + | To create more than one WLAN and optionally separate them see: [[Multiple WLANs]] | |
- | + | ||
- | + | ||
- | + | Depreciated, see one of the following links above. | |
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | Virtual Interfaces wl0.1 | ||
- | Wireless Network Name (SSID): Tivo Network | ||
- | Wireless SSID Broadcast: Disable | ||
- | AP Isolation: Enabled | ||
- | Network Configuration: Unbridged | ||
- | IP Address: 192.168.11.1 | ||
- | Subnet Mask: 255.255.255.0 | ||
- | </pre> | ||
- | |||
- | c) Go to the 'Wireless -> Wireless Security' Page. | ||
- | |||
- | d) Configure wireless security settings any way you want (I used WPA for my Secure Network and no security for my Tivos). | ||
- | <pre> | ||
- | Physical Interface wl0 | ||
- | Security Mode: WPA Personal | ||
- | WPA Algorithms: TKIP | ||
- | WPA Shared Key: ********* | ||
- | Key Renewal Interval: 3600 | ||
- | |||
- | Virtual Interfaces wl0.1 | ||
- | Security Mode: Disabled | ||
- | </pre> | ||
- | |||
- | === Step 2: Create Tivo VLAN (2), bridge (br1), and associate appropriate the appropriate interfaces (port 4 and wl0.1) === | ||
- | |||
- | a) Go to the 'Setup -> VLANs' page. | ||
- | |||
- | b) Change port 4 to VLAN 2 | ||
- | |||
- | c) In addition to the above (I'm not sure that a & b actually do anything), configure NVRAM to move port 4 to VLAN 2 with the following commands (either through telnet/ssh or 'Administration -> Diagnostics') | ||
- | <pre> | ||
- | nvram set vlan0ports="1 2 3 5*" | ||
- | nvram set vlan2ports="4 5t" | ||
- | nvram commit | ||
- | </pre> | ||
- | |||
- | d) Create the following startup script (through 'Administration -> Diagnostics') | ||
- | <pre> | ||
- | brctl addbr br1 | ||
- | brctl addif br1 wl0.1 | ||
- | brctl addif br1 vlan2 | ||
- | ifconfig vlan2 up | ||
- | ifconfig br1 up | ||
- | </pre> | ||
- | |||
- | |||
- | === Step 3: Internet Access or DHCP Server on Tivo Network === | ||
- | Now that the basic network has been created, some additional things might come in handy (such as Internet access or a DHCP server). This section could be used to document this by another user who has need for these features. The references section provides links to several different tutorials that all provide information that will help in configuring these types of things. Although I would start with [[VLAN Detached Networks (Separate Networks With Internet)]] | ||
- | |||
- | =References= | ||
- | * [http://www.dd-wrt.com/phpBB2/viewtopic.php?t=25505 Forum Discussion] | ||
- | * [[Multiple WLANs]] - Easy GUI guide for creating multiple WLAN's. | ||
- | * [[Separate LAN and WLAN]] | ||
- | * [[Separate Lan and WLan]] | ||
- | * [[WLAN separate from LAN, with independent dhcp, etc]] | ||
- | * [[VLAN Configuration]] | ||
- | * [[VLAN Detached Networks (Separate Networks With Internet)]] | ||
- | |||
- | [[Category:Access point]] | ||
[[Category:Wlan]] | [[Category:Wlan]] | ||
[[Category:Advanced tutorials]] | [[Category:Advanced tutorials]] |
Current revision
NOTE: This is an old unmaintained and duplicate guide. You should use one of the following currently maintained guides instead.
To separate the WLAN from the LAN see: Separate LAN and WLAN
To create more than one WLAN and optionally separate them see: Multiple WLANs
Depreciated, see one of the following links above.