Samba filesystem

From DD-WRT Wiki

Revision as of 14:14, 16 September 2021 by Kernel-panic69 (Talk | contribs)
(diff) ←Older revision | Current revision (diff) | Newer revision→ (diff)
Jump to: navigation, search

Samba is one of a number of network file systems available to the DD-WRT platform. A network file system allows for sharing the contents of directories or entire drives across a network. In DD-WRT this can work both ways: You can run a Samba server on your main computer and run a client on your router (thus gaining writable storage for the router) or you can use Samba to share a drive connected (typically by USB) to the router among all the computers connected to your network.

Standard and larger versions of DD-WRT contain the Samba/CIFS client. Mini and Micro versions of DD-WRT do not contain Samba/CIFS. See the Wiki page Version Features.


[edit] Running a Samba client on DD-WRT

  1. Create a SMB network share on the host computer.
    • On Linux, use Samba to create a SMB network share. HOWTO. Also you can find a tutorial specific for JFFS in Configure Samba in Linux
    • On Windows, this is the default file sharing system. Simply right click and select "Sharing and Security" to set up sharing.
    • On MacOS X, go to "Sharing" in the System Preferences and turn on "Windows Sharing" for 10.4 or in 10.5 “Share files and folders using SMB.” from the File Sharing options.
  2. Use the Web Interface and go to the Administration tab.
  3. Enable the Samba FS Automount option (or CIFS Automount). If new options do not appear the "Save Changes" and go back to the page.
  4. Enter the share location in the 'share' field. eg: //
  5. In 'user' and 'password' enter the user credentials of a user allowed to access the share.
  6. You may optionally enter a Startscript. For example if you have a script on your share \\lanserver\myshare\ you enter in the 'Startscript' box. This script (/tmp/smbshare/ on the router) will be executed when the router mounts your share on boot.

You can see sample of startup script on Jffs page.

[edit] Mount Manually

You can temporarily mount a share manually via a Telnet/SSH session:

First, insert a necessary kernel module:

insmod /lib/modules/`uname -r`/smbfs.o

Then enter these commands to mount:

mkdir /tmp/Path
smbmount //hostname/Share /tmp/Path/ -o username=<user>,password=<password_user>

Note: If using CIFS, the procedure is slightly different:

insmod cifs
nvram set samba_user="username"
nvram set samba_password="password"
mkdir /tmp/smbshare
mount.cifs //hostname/Share /tmp/smbshare -o username=$(nvram get samba_user),password=$(nvram get samba_password)
  • /tmp/Path/ is the path you want mounted
  • Only /tmp/, /dev/ and potentially /jffs/ are writeable!

Receiving errors like the following seem normal:

 load_client_codepage: filename /usr/lib/codepages/codepage.850 does not exist.
 load_unicode_map: filename /usr/lib/codepages/unicode_map.850 does not exist.
 session request to failed
 Can't get /etc/mtab~ lock filesmbmnt failed: 1

To unmount a share, enter this command in a shell prompt:

 umount /tmp/Path/
 rmdir /tmp/Path/
 rmmod smbfs

[edit] Allowing General Write Access for Windows Users

On 4/23/09, DD-WRT User locketine advised: You have to mount the drives as rw for the user "nobody". By default drives are mounted read only for everyone but root. The following link told me what I needed to know. I think using "-o user" is the important part when mounting.

[edit] Filesystem to use that works

I initially format my usb hard drive as Fat32 because I wanted to be able to use the drive on any computer. I couldn't get Slim_samba2 to run. Here is a link to the exact same issue I was having.

/opt/etc/init.d/S80samba: line 18: /opt/sbin/smbd: not found

I messed with this for a while and just decided to go with what was recommended in the Slim_samba2 tutorial i.e. etx3/swap/ext3 as defined here How_to_-_Format_and_Partition_External_Storage_Device. It works great.

Ericmagaha 15:12, 31 March 2010 (CEST)

[edit] Allowing write access for any OS i.e. Mac OSX, Windows

I used Slim_samba2 and formatted my drive as ext3/swap/ext3 i.e. Optware/Swapfile/Data as outlined How_to_-_Format_and_Partition_External_Storage_Device. Initially I had readonly access to the drive from Windows and Mac. Had to change the permissions of the Data partition i.e. /mnt/data. It defaulted to 700 i.e. rwx------. I used chmod and changed it to 777 i.e. rwxrwxrwx. I could then write to the Data partition from Windows (Windows explorer) and Mac (Finder).

Ericmagaha 15:12, 31 March 2010 (CEST)

[edit] Note for Windows XP

Windows XP has what is called "simple file sharing" enabled by default. This forces guest access to the share and does not allow permissions (read, write, etc.) based on specific user accounts. If you run into problems getting CIFS to work, consider disabling simple file sharing.

To disable it, go to: My Computer -> Tools -> Folder Options -> View Under Advanced Settings: Uncheck "Use Simple File Sharing" Click Apply, OK

Optionally, run the Network Setup Wizard in Windows Control Panel in order to set up your share(s).

Password Note: Make sure the user account that you wish to access the share has a password. Windows XP will reject any logins over the network which don't use a password.

[edit] Note for Windows Server 2003/ Vista/ 7

Especially on Windows Server 2003, assert that your server accepts NTLM v1.

  1. Goto Start > Run
  2. Type "gpedit.msc" and push enter.
  3. Goto Computer Configuration / Windows Settings / Security Settings / Local Policies / Security Options.
  4. Verify that "Network security: LAN Manager authentication level" is NOT "Send NTLMv2 response only\refuse LM & NTLM" (on Vista Home Premium set HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\LmCompatibilityLevel to 1, because there is no gpedit.msc as in Ultimate )

NOTE For Windows Vista and Windows 7 (mainly), you must use a version of Samba that is 3.4 or higher!

If you have a USB capable router with Optware, the Right Way installed, it will be a breeze for you. For those with only JFFS2 space available, your options are very limited!

To effortlessly get the latest version of Samba working (Samba 3.5.4 as of 08/13/2010) with Optware, the Right Way, you must do the following:

First make a backup of your current Samba, just in case something happens:

For vi users:

  cp /opt/etc/samba/smb.conf /opt/etc/samba/smb.conf.copy
  cp /opt/etc/init.d/S80samba /opt/etc/init.d/S80samba.copy

For users who want to edit those files on their computers:

  cp /opt/etc/samba/smb.conf /mnt/smb.conf.copy
  cp /opt/etc/init.d/S80samba /mnt/S80samba.copy 

Now do the following:

service samba stop
service samba off


ipkg-opt remove samba2 
ipkg-opt install samba35

Let the packages install, and don't worry about Dbus, you won't be needing it. After install has completed, it will prompt you that a new smb.conf file needs to be created. Easy enough...

In the terminal prompt (make sure to use Putty, not Telnet when editing files with Vi!), do the following:

rm -r /opt/etc/samba/smb.conf

Also you will need to delete the file in /opt/etc/init.d that Samba35 has created. It is called S08samba

rm -r /opt/etc/init.d/S08samba

Now create a new smb.conf file:

vi /opt/etc/samba/smb.conf

Once the editor has opened up, the new file should be named smb.conf , Hit the Insert key on your keyboard and paste the following into the new file (give a big thanks to okki, who discovered the interface problem!):

 interfaces =
 security = SHARE
 # don't ask for a password

 path = /opt
 force user = root
 read only = No
 guest ok = Yes

 path = /mnt
 force user = root
 read only = No
 guest ok = Yes

#guest ok = yes:
#guest user 'nobody' is allowed and has access as 'valid users' is not specified (so all users are allowed).

Once properly pasted, hit the ESCAPE key and type :wq followed by Enter

All that's left to do now is to Reboot (although you really don't have to), then when logged back in, type:

service samba on
service samba start

Now you will be able to see your shares and Access them on your network in Windows 7!

NOTE I have not tested Samba35 S.W.A.T yet, but it should be as easy as issuing the following:

ipkg-opt install samba35-swat

Hope this helps!

Finally, for those who do not wish to install Samba 35, or are looking for an even newer version, issue the following:

ipkg-opt upgrade
ipkg-opt update

Then issue

ipkg-opt list | grep samba

[edit] Running a Samba Server on DD-WRT

If you have a powerfull Router like the Asus WL-500gP(remium) you might want to use the USB 2.0 Ports for HD sharing with Windows Clients.

[edit] Samba Server - option 1

The default way - using OpenWRT packages

a) install the USB stuff according to USB_storage
b) activate jffs
c) update the ipkg system with the following command
ipkg update
d) install samba with the following command
ipkg install samba2

samba2 is not a current package.

the samba install requires a libgcc version that is not trivial to find.

[edit] Samba Server - option 2

The optware way - using Optware packages

A nice Howto for this is located here Optware
You should really try it the optware way because it works :)

[edit] Samba Server - option 3: the easy way

See Slim Samba2 - a stripped down version of Optware Samba2 for use on USB drives, just unpack a .tar.gz file, adjust a few settings in the web-GUI, and you are up and runnig.

See HDsamba2 - a fully automated install and boot script for installing Optware Samba2 with SWAT, and more... on a USB HD. Format you HD, adjust a few settings in the web-GUI, run the install script, and you are up and running.

[edit] Samba Server - option 4: Samba3

Since samba2 has issues with files of size >2Gb and <4Gb and has no unicode support, you may want to use samba3.

[edit] Troubleshooting

If you are having issues mounting your share, hopefully the following forum post will help:
Problems mounting with cifs

Also note that the error "Error 22: invalid argument" is a very misleading catch-all error; very often, your arguments are correct and the error actually is on the server side - things such as incorrect permissions can cause it, for instance. There are quite a few variations to the SMB protocol and authentication. In theory, CIFS and the server should be able to figure it out automatically, but it may not always work reliably. These variations include:

Protocol: Netbios over TCP (port 139) or SMB over TCP (port 445)

Authentication: Plain text password, Lanman authentication (obsolete), NTLM authentication (most common) or NTLM2 authentication

These are just some of the most common parameters.

Start by trying to mount a share on a non-existent IP address. It should take a while before you get a timeout error. That tells you that the arguments you passed to mount.cifs are actually valid.

Also, you can try the -v option to mount.cifs to get a better idea of what it does behind the scenes.

mount.cifs // /tmp/sambashares -v -o user=xxxx,pass=xxxx

On the server side, see if you can enable guest access (on a Samba server, set guest OK = yes in your smb.conf file). If that helps, the problem is a matter of either user name resolution or passwords.

If you are having windows 7 access issues try adding 'host msdf = no' into the global area of your samba config file. I am not sure exactly what is happening but windows 7 seems to sometimes make samba think its a ms distributed filesystem host and so refuses to show access to files unless you map the device to a drive. This cleared it up for me and is working great accessing with a windows 7 box.