Samba3
From DD-WRT Wiki
Since samba2 has issues with files of size >2Gb and <4Gb you may want to use samba3. It is more resource consuming though, and you probably will need a swap if your router has less than 32Mb RAM or running other RAM consuming programs
Partition and format your USB drive
You need to first partition and format your drive
- This can be done by attaching the drive to an other system like:
- a PC running linux (maybe from a LiveCD)
- a Windows PC using a partitioning tool
- a windows PC with VirtualBox running a Linux guest system
- Some have been able to use their iPod.
First partition on your drive needs to be ext2 or ext3. ext3 is more fault tolerant, so could be a better choice in general.
For use with Eko Mini_usb_ftp, the first partition needs to be ext3,
for use with Mega builds, the first partition can be formatted as ext2 or ext3
You do not need more than one partition on you USB drive to use Samba3, but you may also use it with a three partition drive, as is common place when used with a HD.
Prepare for samba3
- Tested with Eko 24-sp2 (09/01/09) mini-usb-ftp - build 12774M NEWD.
- For Mini_usb_ftp version your partition must be ext3
- For Mega version your partition can be either ext2 or ext3
Enable USB in web-GUI and set
- enable USB1.1, USB2 as neded for your router and usb drive
- enable "USB Storage Support"
- enable "ext2 / ext3 File System Support"
- enable "Automatic Drive Mount"
- set "Run-on-mount Script Name" to /mnt/mounted.sh
- set "Disk Mount Point" /mnt
For good meassure you should also set shutdown commands in web-GUI
- tab: Administration -> tab: Commands -> text field: Commands ->
- write this line
sh /jffs/usr/bin/unplug.usb
- Click "Save Shutdown"
Prepare your router to install Optware For simplicity you may just create folder /mnt/opt and in terminal run
mount /mnt/opt /opt wget http://www.3iii.dk/linux/optware/optware-install-ddwrt.sh -O - | tr -d '\r' > /tmp/optware-install.sh sh /tmp/optware-install.sh
It is a good idea to set up a swap file
Create script file /mnt/mounted.sh with something like this:
#!/bin/sh mount /mnt/opt /opt sleep 2 /bin/sh /opt/etc/init.d/S08samba # if you need SWAT, uncomment the following^ #/bin/sh /opt/etc/init.d/S10xinetd
It will launch samba daemon automatically every time after disc mounting
Create script file /jffs/usr/bin/unplug.usb with something like this:
#!/bin/sh #=========stop samba============ echo "Stopping smbd:" killall smbd echo "Stopping nmbd:" killall nmbd #==========stop xinetd========== echo "Stopping xinetd:" killall xinetd
make both scripts executable
chmod +x /jffs/usr/bin/unplug.usb chmod +x /mnt/mounted.sh
Install samba3
wget -O /tmp/ConfSamba3.usb http://www.dd-wrt.com/phpBB2/download.php?id=11668 chmod +x /tmp/ConfSamba3.usb sh /tmp/ConfSamba3.usb
type ps in terminal to check out if processes smbd, nmd and optionally xinetd are running.
You may tweak memory consumption int /opt/etc/samba/smb.conf file in this line
socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
But it has strong effect on performance.