Samba文件系统

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 09:14, 21 May 2010 (edit)
Leangjia (Talk | contribs)
(New page: Samba是一个DD-WRT可用的 网络文件系统 平台。 A network file system allows for sharing the contents of directories or entire drives across a network...)
← Previous diff
Revision as of 15:13, 5 April 2011 (edit) (undo)
Leangjia (Talk | contribs)

Next diff →
(4 intermediate revisions not shown.)
Line 1: Line 1:
-Samba是一个DD-WRT可用的 [[network file systems | 网络文件系统]] 平台。 A network file system allows for sharing the contents of directories or entire drives across a network. In DD-WRT this can work both ways: You can run a Samba server on your main computer and run a client on your router (thus gaining writable storage for the router) or you can use Samba to share a drive connected (typically by [[USB]]) to the router among all the computers connected to your network.+{{Languages|Samba Filesystem}}
 +Samba是一个DD-WRT可用的 [[network file systems | 网络文件系统]] 平台。一个允许通过网络来共享文件的系统。在DD-WRT中有两种实现方法:一是在计算机上搭SAMBA服务器和在路由器上运行客户端,二是在路由器上搭SAMBA服务器端然后通过网络来共享文件内容(参详DD-WRT挂载USB设备的章节内容)。另注一下,最新版本的DD-WRT已经将SAMBA集成在固件内了。
-''Standard and larger versions of DD-WRT contain the Samba/CIFS client. Mini and Micro versions of DD-WRT do not contain Samba/CIFS. See the Wiki page [[What is DD-WRT?#File Versions]].''+准备一个最新版本的集成电路有Samba/CIFS客户端的DD-WRT固件。 Mini和Micro版本的DD-WRT不包含Samba/CIFS的。 参[[What is DD-WRT?#File Versions]]WIKI页。''
== 在 DD-WRT上 运行一 个 Samba客戶端 == == 在 DD-WRT上 运行一 个 Samba客戶端 ==
Line 95: Line 96:
# Verify that "Network security: LAN Manager authentication level" is '''NOT''' "Send NTLMv2 response only\refuse LM & NTLM" (on Vista Home Premium set HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\LmCompatibilityLevel to 1, because there is no gpedit.msc as in Ultimate ) # Verify that "Network security: LAN Manager authentication level" is '''NOT''' "Send NTLMv2 response only\refuse LM & NTLM" (on Vista Home Premium set HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\LmCompatibilityLevel to 1, because there is no gpedit.msc as in Ultimate )
-== 在 DD-WRT上 运行一 个 Samba服务端 ==+==在DD-WRT上运行一个Samba服务端==
-If you have a powerfull Router like the Asus WL-500gP(remium) you might want to use the USB 2.0 Ports for HD sharing with Windows Clients.+如果你有一个类似华硕WL-500gP(remium)这样的强大路由器,你也许希望使用USB 2.0端口来与Windows客户机共享高清视频。
-=== Samba Server - 选项 1 ===+===Samba Server - 选项 1===
The default way - using OpenWRT packages The default way - using OpenWRT packages
Line 114: Line 115:
the samba install requires a libgcc version that is not trivial to find. the samba install requires a libgcc version that is not trivial to find.
-=== Samba Server - 选项 2 ===+===Samba Server - 选项 2===
The [[optware]] way - using Optware packages The [[optware]] way - using Optware packages
Line 121: Line 122:
:You should really try it the optware way because it works :) :You should really try it the optware way because it works :)
-=== Samba Server - 选项 3: 简单的方法 ===+===Samba Server - 选项 3: 简单的方法===
See [[Slim_samba2|Slim Samba2]] - a stripped down version of Optware Samba2 for use on USB drives, just unpack a .tar.gz file, adjust a few settings in the web-GUI, and you are up and runnig. See [[Slim_samba2|Slim Samba2]] - a stripped down version of Optware Samba2 for use on USB drives, just unpack a .tar.gz file, adjust a few settings in the web-GUI, and you are up and runnig.
Line 127: Line 128:
See [[HDsamba2]] - a fully automated install and boot script for installing Optware Samba2 with SWAT, and more... on a USB HD. Format you HD, adjust a few settings in the web-GUI, run the install script, and you are up and running. See [[HDsamba2]] - a fully automated install and boot script for installing Optware Samba2 with SWAT, and more... on a USB HD. Format you HD, adjust a few settings in the web-GUI, run the install script, and you are up and running.
-=== Samba Server - 选项 4: Samba3 ===+===Samba Server - 选项 4: Samba3===
Since [http://www.dd-wrt.com/phpBB2/viewtopic.php?p=371978 samba2 has issues with files of size >2Gb and <4Gb] and has no unicode support, you may want to use [[samba3]]. Since [http://www.dd-wrt.com/phpBB2/viewtopic.php?p=371978 samba2 has issues with files of size >2Gb and <4Gb] and has no unicode support, you may want to use [[samba3]].
Line 150: Line 151:
On the server side, see if you can enable guest access (on a Samba server, set guest OK = yes in your smb.conf file). If that helps, the problem is a matter of either user name resolution or passwords. On the server side, see if you can enable guest access (on a Samba server, set guest OK = yes in your smb.conf file). If that helps, the problem is a matter of either user name resolution or passwords.
-[[Category:Samba]]+[[Category:Samba/zh cn]]
-[[Category:Basic tutorials]]+[[Category:Basic tutorials/zh cn]]

Revision as of 15:13, 5 April 2011

Samba是一个DD-WRT可用的 网络文件系统 平台。一个允许通过网络来共享文件的系统。在DD-WRT中有两种实现方法:一是在计算机上搭SAMBA服务器和在路由器上运行客户端,二是在路由器上搭SAMBA服务器端然后通过网络来共享文件内容(参详DD-WRT挂载USB设备的章节内容)。另注一下,最新版本的DD-WRT已经将SAMBA集成在固件内了。

准备一个最新版本的集成电路有Samba/CIFS客户端的DD-WRT固件。 Mini和Micro版本的DD-WRT不包含Samba/CIFS的。 参What is DD-WRT?#File VersionsWIKI页。

Contents

在 DD-WRT上 运行一 个 Samba客戶端

  1. Create a SMB network share on the host computer.
    • On Linux, use Samba to create a SMB network share. HOWTO. Also you can find a tutorial specific for JFFS in Configure Samba in Linux
    • On Windows, this is the default file sharing system. Simply right click and select "Sharing and Security" to set up sharing.
    • On MacOS X, go to "Sharing" in the System Preferences and turn on "Windows Sharing" for 10.4 or in 10.5 “Share files and folders using SMB.” from the File Sharing options.
  2. Use the Web Interface and go to the Administration tab.
  3. Enable the Samba FS Automount option (or CIFS Automount). If new options do not appear the "Save Changes" and go back to the page.
  4. Enter the share location in the 'share' field. eg: //192.168.1.160/myshare
  5. In 'user' and 'password' enter the user credentials of a user allowed to access the share.
  6. You may optionally enter a Startscript. For example if you have a script on your share \\lanserver\myshare\startup.sh you enter startup.sh in the 'Startscript' box. This script (/tmp/smbshare/startup.sh on the router) will be executed when the router mounts your share on boot.

You can see sample of startup script on Jffs page.

手动Mount

You can temporarily mount a share manually via a Telnet/SSH session:

First, insert a necessary kernel module:

insmod /lib/modules/`uname -r`/smbfs.o

Then enter these commands to mount:

mkdir /tmp/Path
smbmount //hostname/Share /tmp/Path/ -o username=<user>,password=<password_user>

Note: If using CIFS, the procedure is slightly different:

insmod cifs
nvram set samba_user="username"
nvram set samba_password="password"
mkdir /tmp/smbshare
mount.cifs //hostname/Share /tmp/smbshare -o username=$(nvram get samba_user),password=$(nvram get samba_password)
  • /tmp/Path/ is the path you want mounted
  • Only /tmp/, /dev/ and potentially /jffs/ are writeable!

Receiving errors like the following seem normal:

 load_client_codepage: filename /usr/lib/codepages/codepage.850 does not exist.
 load_unicode_map: filename /usr/lib/codepages/unicode_map.850 does not exist.
 session request to 192.168.1.99 failed
 Can't get /etc/mtab~ lock filesmbmnt failed: 1

To unmount a share, enter this command in a shell prompt:

 umount /tmp/Path/
 rmdir /tmp/Path/
 rmmod smbfs


允许一般 Windows用户写及访问

On 4/23/09, DD-WRT User locketine advised: You have to mount the drives as rw for the user "nobody". By default drives are mounted read only for everyone but root. The following link told me what I needed to know. I think using "-o user" is the important part when mounting.

http://www.linuxforums.org/forum/debian-linux-help/79749-mount-fat32-shared-partition-write-permission.html

Filesystem to use that works

I initially format my usb hard drive as Fat32 because I wanted to be able to use the drive on any computer. I couldn't get Slim_samba2 to run. Here is a link to the exact same issue I was having.

/opt/etc/init.d/S80samba: line 18: /opt/sbin/smbd: not found

I messed with this for a while and just decided to go with what was recommended in the Slim_samba2 tutorial i.e. etx3/swap/ext3 as defined here How_to_-_Format_and_Partition_External_Storage_Device. It works great.

Ericmagaha 15:12, 31 March 2010 (CEST)

允许任何操作系统,如Mac OSX,Windows

I used Slim_samba2 and formatted my drive as ext3/swap/ext3 i.e. Optware/Swapfile/Data as outlined How_to_-_Format_and_Partition_External_Storage_Device. Initially I had readonly access to the drive from Windows and Mac. Had to change the permissions of the Data partition i.e. /mnt/data. It defaulted to 700 i.e. rwx------. I used chmod and changed it to 777 i.e. rwxrwxrwx. I could then write to the Data partition from Windows (Windows explorer) and Mac (Finder).

Ericmagaha 15:12, 31 March 2010 (CEST)

Windows XP注意

Windows XP has what is called "simple file sharing" enabled by default. This forces guest access to the share and does not allow permissions (read, write, etc.) based on specific user accounts. If you run into problems getting CIFS to work, consider disabling simple file sharing.

To disable it, go to: My Computer -> Tools -> Folder Options -> View Under Advanced Settings: Uncheck "Use Simple File Sharing" Click Apply, OK

Optionally, run the Network Setup Wizard in Windows Control Panel in order to set up your share(s).

Password Note: Make sure the user account that you wish to access the share has a password. Windows XP will reject any logins over the network which don't use a password.

Windows Server 2003/ Vista/ 7注意

Especially on Windows Server 2003, assert that your server accepts NTLM v1.

  1. Goto Start > Run
  2. Type "gpedit.msc" and push enter.
  3. Goto Computer Configuration / Windows Settings / Security Settings / Local Policies / Security Options.
  4. Verify that "Network security: LAN Manager authentication level" is NOT "Send NTLMv2 response only\refuse LM & NTLM" (on Vista Home Premium set HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\LmCompatibilityLevel to 1, because there is no gpedit.msc as in Ultimate )

在DD-WRT上运行一个Samba服务端

如果你有一个类似华硕WL-500gP(remium)这样的强大路由器,你也许希望使用USB 2.0端口来与Windows客户机共享高清视频。

Samba Server - 选项 1

The default way - using OpenWRT packages

a) install the USB stuff according to USB_storage
b) activate jffs
c) update the ipkg system with the following command
ipkg update
d) install samba with the following command
ipkg install samba2

samba2 is not a current package.

the samba install requires a libgcc version that is not trivial to find.

Samba Server - 选项 2

The optware way - using Optware packages

A nice Howto for this is located here Optware
You should really try it the optware way because it works :)

Samba Server - 选项 3: 简单的方法

See Slim Samba2 - a stripped down version of Optware Samba2 for use on USB drives, just unpack a .tar.gz file, adjust a few settings in the web-GUI, and you are up and runnig.

See HDsamba2 - a fully automated install and boot script for installing Optware Samba2 with SWAT, and more... on a USB HD. Format you HD, adjust a few settings in the web-GUI, run the install script, and you are up and running.

Samba Server - 选项 4: Samba3

Since samba2 has issues with files of size >2Gb and <4Gb and has no unicode support, you may want to use samba3.

疑难解答

If you are having issues mounting your share, hopefully the following forum post will help:
Problems mounting with cifs

Also note that the error "Error 22: invalid argument" is a very misleading catch-all error; very often, your arguments are correct and the error actually is on the server side - things such as incorrect permissions can cause it, for instance. There are quite a few variations to the SMB protocol and authentication. In theory, CIFS and the server should be able to figure it out automatically, but it may not always work reliably. These variations include:

Protocol: Netbios over TCP (port 139) or SMB over TCP (port 445)

Authentication: Plain text password, Lanman authentication (obsolete), NTLM authentication (most common) or NTLM2 authentication

These are just some of the most common parameters.

Start by trying to mount a share on a non-existent IP address. It should take a while before you get a timeout error. That tells you that the arguments you passed to mount.cifs are actually valid.

Also, you can try the -v option to mount.cifs to get a better idea of what it does behind the scenes.

mount.cifs //192.168.0.15/myshare /tmp/sambashares -v -o user=xxxx,pass=xxxx

On the server side, see if you can enable guest access (on a Samba server, set guest OK = yes in your smb.conf file). If that helps, the problem is a matter of either user name resolution or passwords.