SES Button

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 15:47, 28 March 2007 (edit)
Cyberde (Talk | contribs)
(Added prerequisites)
← Previous diff
Current revision (10:46, 6 December 2019) (edit) (undo)
Atatob (Talk | contribs)
m (Add language list)
 
(12 intermediate revisions not shown.)
Line 1: Line 1:
 +{{Languages|SES Button}}
=Introduction= =Introduction=
-The SES/AOSS/EZ-SETUP is the button you can find on your router. You can use that button to Enable/Disable Wireless or to execute scripts when it's pressed.+The [[wikipedia:SecureEasySetup|SES]]/[[wikipedia:AOSS|AOSS]]/EZ-SETUP is the button you can find on your router. You can use that button to Enable/Disable Wireless or to execute scripts when it's pressed.
- +
=Prerequisites= =Prerequisites=
-In order to get the SES/AOSS/EZ-SETUP to work, you must have Reset Button ENABLED+In order to get the SES/AOSS/EZ-SETUP to work, you must have Reset Button ENABLED, located in the Administration -> Management section
[[Image:Resetbutton.png|Reset button]] [[Image:Resetbutton.png|Reset button]]
- 
=Turning on/off wireless= =Turning on/off wireless=
You can turn on/off the wireless transmit of your router by pressing this button. Ofcourse before that you have to enable the service for that. You can turn on/off the wireless transmit of your router by pressing this button. Ofcourse before that you have to enable the service for that.
-Therefore go to Administration -> Services and tick Enable at the "SES / AOSS / EZ-SETUP Button" group+Therefore go to Services -> Services and tick Enable at the "SES / AOSS / EZ-SETUP Button" group
[[Image:Ses radio.png|SES/AOSS/EZ-SETUP button setup]] [[Image:Ses radio.png|SES/AOSS/EZ-SETUP button setup]]
- 
=Run script when button pressed= =Run script when button pressed=
-You can also run a script when the SES/AOSS/EZ-SETUP button is pressed, therefore have a look at [[Script Execution#Script types | Script types]]+You can also run a script when the SES/AOSS/EZ-SETUP button is pressed, therefore have a look at [[Script Execution#Script types | Script types]]. **Note:** You must have "Use this button for turning off radio" disabled (see section immediately above)
 +===Example to test custom button script===
 +The following instructions will create a script that will flash the DMZ LED 10 times when you press the SES/AOSS/EZ-SETUP button.
 +
 +Type in the following commands:
 + mkdir /tmp/etc/config
 +
 +Make a file blink.sesbutton with the following contents (e.g. "vi /tmp/etc/config/blink.sesbutton"):
 +
 + for i in 1 2 3 4 5 6 7 8 9 10;do
 + gpio disable 7
 + usleep 50000
 + gpio enable 7
 + usleep 50000
 + done
 +
 + chmod 744 /tmp/etc/config/blink.sesbutton
 +
 +Now when you press the SES/AOSS/EZ-SETUP button the DMZ light will flash 10 times.
=Caution= =Caution=
Line 27: Line 43:
''See http://dd-wrt.com/phpBB2/viewtopic.php?t=11658 for more info'' ''See http://dd-wrt.com/phpBB2/viewtopic.php?t=11658 for more info''
 +There is also a risk that it will break the radio on the WHR-HP-G54 without bricking the router.
 +
 +"See http://www.dd-wrt.com/phpBB2/viewtopic.php?t=60827 for more info"
=Links= =Links=
 +*[[Useful Scripts]]
 +*[[Startup Scripts]]
-[[Useful Scripts]]+[[Category:Networking hardware]]
- +[[Category:Scripts]]
-[[Startup Scripts]]+
- +
-[[Category:English documentation]]+

Current revision

Contents

[edit] Introduction

The SES/AOSS/EZ-SETUP is the button you can find on your router. You can use that button to Enable/Disable Wireless or to execute scripts when it's pressed.

[edit] Prerequisites

In order to get the SES/AOSS/EZ-SETUP to work, you must have Reset Button ENABLED, located in the Administration -> Management section


Reset button

[edit] Turning on/off wireless

You can turn on/off the wireless transmit of your router by pressing this button. Ofcourse before that you have to enable the service for that. Therefore go to Services -> Services and tick Enable at the "SES / AOSS / EZ-SETUP Button" group


SES/AOSS/EZ-SETUP button setup

[edit] Run script when button pressed

You can also run a script when the SES/AOSS/EZ-SETUP button is pressed, therefore have a look at Script types. **Note:** You must have "Use this button for turning off radio" disabled (see section immediately above)

[edit] Example to test custom button script

The following instructions will create a script that will flash the DMZ LED 10 times when you press the SES/AOSS/EZ-SETUP button.

Type in the following commands:

 mkdir /tmp/etc/config

Make a file blink.sesbutton with the following contents (e.g. "vi /tmp/etc/config/blink.sesbutton"):

 for i in 1 2 3 4 5 6 7 8 9 10;do
   gpio disable 7
   usleep 50000
   gpio enable 7
   usleep 50000
 done
 chmod 744 /tmp/etc/config/blink.sesbutton

Now when you press the SES/AOSS/EZ-SETUP button the DMZ light will flash 10 times.

[edit] Caution

Pressing the AOSS button on a WHR-HP-G54 while booting may brick the router.

See http://dd-wrt.com/phpBB2/viewtopic.php?t=11658 for more info

There is also a risk that it will break the radio on the WHR-HP-G54 without bricking the router.

"See http://www.dd-wrt.com/phpBB2/viewtopic.php?t=60827 for more info"

[edit] Links