SES Button
From DD-WRT Wiki
Revision as of 15:47, 28 March 2007 (edit) Cyberde (Talk | contribs) (Added prerequisites) ← Previous diff |
Revision as of 17:52, 13 September 2008 (edit) (undo) Seren (Talk | contribs) (→Prerequisites) Next diff → |
||
Line 4: | Line 4: | ||
=Prerequisites= | =Prerequisites= | ||
- | In order to get the SES/AOSS/EZ-SETUP to work, you must have Reset Button ENABLED | + | In order to get the SES/AOSS/EZ-SETUP to work, you must have Reset Button ENABLED, located in the Administration -> Management section |
[[Image:Resetbutton.png|Reset button]] | [[Image:Resetbutton.png|Reset button]] | ||
- | |||
=Turning on/off wireless= | =Turning on/off wireless= |
Revision as of 17:52, 13 September 2008
Contents |
Introduction
The SES/AOSS/EZ-SETUP is the button you can find on your router. You can use that button to Enable/Disable Wireless or to execute scripts when it's pressed.
Prerequisites
In order to get the SES/AOSS/EZ-SETUP to work, you must have Reset Button ENABLED, located in the Administration -> Management section
Turning on/off wireless
You can turn on/off the wireless transmit of your router by pressing this button. Ofcourse before that you have to enable the service for that. Therefore go to Administration -> Services and tick Enable at the "SES / AOSS / EZ-SETUP Button" group
Run script when button pressed
You can also run a script when the SES/AOSS/EZ-SETUP button is pressed, therefore have a look at Script types
Caution
Pressing the AOSS button on a WHR-HP-G54 while booting may brick the router.
See http://dd-wrt.com/phpBB2/viewtopic.php?t=11658 for more info