SD/MMC mod

From DD-WRT Wiki

Revision as of 10:23, 2 July 2007 by Iron (Talk | contribs)
(diff) ←Older revision | Current revision (diff) | Newer revision→ (diff)
Jump to: navigation, search

SD/MMC Mod for the Buffalo WHR-G54S

This is a work in progress...

Check the Wiki how to open my Buffalo WHR-G54S to open your router without breaking it.

Finding suitable IO points.

Multimeter, ground reference. while true; do gpio disable 2; sleep 1; gpio enable 2; sleep 1; done Use negative side of LED (+ side is marked).


Checking the power supply

Required tools: Soldering iron with a very fine tip. Some pieces of thin wire (diameters approx. 0.25 mm) A SD card adapter. A SD or MMC card.




Image:WHR G54S SD MOD-Management Screen.png