Router Slowdown
From DD-WRT Wiki
Revision as of 02:37, 29 August 2006 (edit) AlReece45 (Talk | contribs) m (→Symptoms) ← Previous diff |
Revision as of 23:47, 2 October 2006 (edit) (undo) Whiteboy (Talk | contribs) Next diff → |
||
Line 1: | Line 1: | ||
- | __TOC__ | ||
- | |||
- | =Introduction= | ||
A lot of people have issues with their router slowing down/crashing/hanging/not responding over time.<br> | A lot of people have issues with their router slowing down/crashing/hanging/not responding over time.<br> | ||
Usually these people are running P2P software like Emule, Bittorrent, Shareaza or something else. | Usually these people are running P2P software like Emule, Bittorrent, Shareaza or something else. | ||
<br> | <br> | ||
You might want to play a little bit with the values, to fit it to your own needs. | You might want to play a little bit with the values, to fit it to your own needs. | ||
- | |||
=Symptoms= | =Symptoms= |
Revision as of 23:47, 2 October 2006
A lot of people have issues with their router slowing down/crashing/hanging/not responding over time.
Usually these people are running P2P software like Emule, Bittorrent, Shareaza or something else.
You might want to play a little bit with the values, to fit it to your own needs.
Contents |
Symptoms
Even if it happens the router doesn't answer pings anymore and no more HTTP, you still can check what's going on through syslogd.
To view syslog messages, Telnet or SSH into your router, login and run the following command:
cat /var/log/messages
Here is a brief description of what's going on :
- First, you'll see 'full, dropping packet.' messages followed by 'messages suppressed.'
- Eventually, it will get verbose and you'll see logs similar to the following :
<4>kernel: ip_conntrack: table full, dropping packet. <4>kernel: NET: 15 messages suppressed. <4>kernel: ip_conntrack: table full, dropping packet. <4>kernel: NET: 12 messages suppressed.
Solution Nr 1
- Go to the Web-Admin and log in
- Go to 'Administration'
- Go to 'Management'
- Enter the following values at 'IP Filter Settings'
- Maximum Ports: 4096
- TCP Timeout (s): 90 or 120
- UDP Timeout (s): 90 or 120
Screenshot
AIM, ICQ and other IM programs
If you're using certain IM clients such as ICQ or AIM (or other applications which do not send frequent keep-alive packets), you should set timeout to 300 or 600 to help them stay connected. As this will decrease the router's performance when you're dealing with heavy P2P traffic, you might want to experiment with these values.
Solution Nr 2
DD-WRT has an inbuild proxy feature that allows rewriting of HTML content to filter ActiveX cookies etc. As this is load intense you may want to disable this feature. This should be done under
Security->Firewall
Unfortunately this function has 3 bugs
- Though all 4 checkboxes are unchecked the rewriting proxy is still running (you might have to reboot)
- It drops connections if under heavy load
- It probably runs haywire checking traffic on other ports than 80, hence the slowdown with p2p applications (unconfirmed)
The only solution is to totally disable the firewall (which I do NOT recommend) in
Security->Firewall
This fixes all slowdowns
This behavior has been seen in v22 and v23
Please report this to the maintainer and put it in the bug database
Solution Nr 3
Apparently there is a bug in the WRT54GS v2.2 The bug involves a fatal memory access error due to a difference in the CPU clock speed and the clock speed on the memory bus. This bug causes connections to be dropped when transferring large files. New versions of the Linksys firmware overclock the CPU to 216 MHz. This can be fixed by logging into the router via SSH or Telnet (Telnet/SSH and the Command Line) and executing the following commands.
nvram set clkfreq=216 nvram commit reboot
Extra Information
The line:
echo '600 1800 120 60 120 120 10 60 30 120' > /proc/sys/net/ipv4/ip_conntrack_tcp_timeouts
is often recommended in forums, but precious few know what it really does. Here is the information.
It is a list for all the possible TCP states and their time outs in seconds. See my table below (they are in the correct order):
State Timeout value NONE 10 minutes ESTABLISHED 30 minutes (default is 5 days) SYN_SENT 2 minutes SYN_RECV 60 seconds FIN_WAIT 2 minutes TIME_WAIT 2 minutes CLOSE 10 seconds CLOSE_WAIT 60 seconds (default is 12 hours) LAST_ACK 30 seconds LISTEN 2 minutes
You can check what your router is set to by printing the same device used above. (I recommend checking the values on your router before you change them):
cat /proc/sys/net/ipv4/ip_conntrack_tcp_timeouts 300 600 120 60 120 120 10 60 30 120