Remote Access

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 18:23, 30 April 2010 (edit)
Glenn (Talk | contribs)
(catchg)
← Previous diff
Revision as of 23:03, 23 March 2018 (edit) (undo)
Ian5142 (Talk | contribs)
(Added Monitoring Category.)
Next diff →
Line 17: Line 17:
*On the primary router, forward port X to LAN IP address of the Client Bridge, where X = 22 for SSH, 23 for Telnet, 80 for HTTP, or 443 for HTTPS. *On the primary router, forward port X to LAN IP address of the Client Bridge, where X = 22 for SSH, 23 for Telnet, 80 for HTTP, or 443 for HTTPS.
-[[Category:Applications settings]]+[[Category:Monitoring]]
[[Category: Basic tutorials]] [[Category: Basic tutorials]]

Revision as of 23:03, 23 March 2018

Contents

AP Mode (Gateway)

  • Go to Administration -> Management -> Remote Access. Enable the necessary settings for remote Web or SSH access. Remember the WAN IP and port number, as you will need to specify those in order to connect from a remote location.

Switch/Wireless Access Point

  • On the primary router, forward port X to the LAN IP address of the Switch/WAP, where X = 22 for SSH, 23 for Telnet, 80 for HTTP, or 443 for HTTPS.

Repeater

  • Go to Administration -> Management -> Remote Access. Enable the necessary settings for remote Web or SSH access (note the WAN IP and port number), then in your main router forward that port to the WAN IP address of the Repeater.

Repeater Bridge

  • On the primary router, forward port X to the LAN IP address of the Repeater Bridge, where X = 22 for SSH, 23 for Telnet, 80 for HTTP, or 443 for HTTPS.

Client

  • Go to Administration -> Management -> Remote Access. Enable the necessary settings for remote Web or SSH access (note the WAN IP and port number), then in your main router forward that port to the WAN IP address of the Client router.

Client Bridge

  • On the primary router, forward port X to LAN IP address of the Client Bridge, where X = 22 for SSH, 23 for Telnet, 80 for HTTP, or 443 for HTTPS.