Remote Access

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 17:45, 14 February 2009 (edit)
Soulstace (Talk | contribs)
m (Remote Access)
← Previous diff
Current revision (22:25, 4 January 2019) (edit) (undo)
Ian5142 (Talk | contribs)
(Added language header.)
 
(2 intermediate revisions not shown.)
Line 1: Line 1:
 +{{Languages|Remote_Access}}
 +
===AP Mode (Gateway)=== ===AP Mode (Gateway)===
*Go to '''Administration -> Management -> Remote Access'''. Enable the necessary settings for remote Web or SSH access. Remember the WAN IP and port number, as you will need to specify those in order to connect from a remote location. *Go to '''Administration -> Management -> Remote Access'''. Enable the necessary settings for remote Web or SSH access. Remember the WAN IP and port number, as you will need to specify those in order to connect from a remote location.
Line 17: Line 19:
*On the primary router, forward port X to LAN IP address of the Client Bridge, where X = 22 for SSH, 23 for Telnet, 80 for HTTP, or 443 for HTTPS. *On the primary router, forward port X to LAN IP address of the Client Bridge, where X = 22 for SSH, 23 for Telnet, 80 for HTTP, or 443 for HTTPS.
-[[Category: English documentation]][[Category: Basic tutorials]]+[[Category:Monitoring]]
 +[[Category: Basic tutorials]]

Current revision


Contents

[edit] AP Mode (Gateway)

  • Go to Administration -> Management -> Remote Access. Enable the necessary settings for remote Web or SSH access. Remember the WAN IP and port number, as you will need to specify those in order to connect from a remote location.

[edit] Switch/Wireless Access Point

  • On the primary router, forward port X to the LAN IP address of the Switch/WAP, where X = 22 for SSH, 23 for Telnet, 80 for HTTP, or 443 for HTTPS.

[edit] Repeater

  • Go to Administration -> Management -> Remote Access. Enable the necessary settings for remote Web or SSH access (note the WAN IP and port number), then in your main router forward that port to the WAN IP address of the Repeater.

[edit] Repeater Bridge

  • On the primary router, forward port X to the LAN IP address of the Repeater Bridge, where X = 22 for SSH, 23 for Telnet, 80 for HTTP, or 443 for HTTPS.

[edit] Client

  • Go to Administration -> Management -> Remote Access. Enable the necessary settings for remote Web or SSH access (note the WAN IP and port number), then in your main router forward that port to the WAN IP address of the Client router.

[edit] Client Bridge

  • On the primary router, forward port X to LAN IP address of the Client Bridge, where X = 22 for SSH, 23 for Telnet, 80 for HTTP, or 443 for HTTPS.