Ralink (unbranded/unsupported)
From DD-WRT Wiki
(Difference between revisions)
Revision as of 13:11, 6 January 2013 (edit) Sash (Talk | contribs) (→Flash instructions) ← Previous diff |
Revision as of 13:14, 6 January 2013 (edit) (undo) Sash (Talk | contribs) (→Flash instructions) Next diff → |
||
Line 15: | Line 15: | ||
=Flash instructions= | =Flash instructions= | ||
- | Check the supported devices list for units which use the same chipset and are already supported. | + | Check the supported devices list for units which use the same chipset and are already supported. Get some of the initial builds. <br> |
+ | Install a tftp server. | ||
==RT2880F== | ==RT2880F== | ||
Line 27: | Line 28: | ||
==RT3350F== | ==RT3350F== | ||
+ | Flash the Buffalo WCR-GN initial build. | ||
[[Category:Basic tutorials]] | [[Category:Basic tutorials]] |
Revision as of 13:14, 6 January 2013
Contents |
Since there a many unbranded and unsupported Ralink based router out there, which have all similar/equal specs, there is a fair chance to get them running DD-WRT even if they are not officially supportey by this time.
Supported Hardware
There are a few basic specs that are mandatory for running DD-WRT on Ralink based router.
- >=4MB flash
- 32MB RAM (16MB RAM only on stripped DD-WRT versions)
- UBoot bootloader
Flash instructions
Check the supported devices list for units which use the same chipset and are already supported. Get some of the initial builds.
Install a tftp server.
RT2880F
This units have an external switch, so there is always a hardware donation needed for porting it to DD-WRT.
RT3050F/RT3052F
RT3350F
Flash the Buffalo WCR-GN initial build.