Ralink (unbranded/unsupported)

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 11:46, 6 January 2013 (edit)
Sash (Talk | contribs)
(Supported Hardware)
← Previous diff
Revision as of 13:10, 6 January 2013 (edit) (undo)
Sash (Talk | contribs)
(Supported Hardware)
Next diff →
Line 7: Line 7:
=Supported Hardware= =Supported Hardware=
-There are a few basic specs that are mandatory for running DD-WRT on Ralink based router. Categorized by chipset.+There are a few basic specs that are mandatory for running DD-WRT on Ralink based router.
 + 
 +*>=4MB flash
 +*32MB RAM (16MB RAM only on stripped DD-WRT versions)
 +*UBoot bootloader
 + 
 +=Flash instructions=
==RT2880F== ==RT2880F==
- >=4MB flash+This units have an external switch, so there is always a hardware donation needed for porting it to DD-WRT.
==RT3050F/RT3052F== ==RT3050F/RT3052F==
- >=4MB flash+ 
==RT3350F== ==RT3350F==
- >=4MB flash+ 
[[Category:Basic tutorials]] [[Category:Basic tutorials]]

Revision as of 13:10, 6 January 2013

Contents


Since there a many unbranded and unsupported Ralink based router out there, which have all similar/equal specs, there is a fair chance to get them running DD-WRT even if they are not officially supportey by this time.


Supported Hardware

There are a few basic specs that are mandatory for running DD-WRT on Ralink based router.

  • >=4MB flash
  • 32MB RAM (16MB RAM only on stripped DD-WRT versions)
  • UBoot bootloader

Flash instructions

RT2880F

This units have an external switch, so there is always a hardware donation needed for porting it to DD-WRT.

RT3050F/RT3052F

RT3350F