RNX-GX4 Serial Port Connections

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 02:45, 13 October 2010 (edit)
Hamradio2008 (Talk | contribs)
(Netcore NW618 same as Rosewill RNX-GX4)
← Previous diff
Revision as of 20:13, 22 June 2012 (edit) (undo)
Glenn (Talk | contribs)
(+ Category:Hardware)
Next diff →
Line 6: Line 6:
The picture shows the serial port connected to a MAX232CPE serial level converter chip. The picture shows the serial port connected to a MAX232CPE serial level converter chip.
[[Image:RNX-GX4 Serial Port Connections pic3e.jpg]] [[Image:RNX-GX4 Serial Port Connections pic3e.jpg]]
 +
 +[[Category:Hardware]]

Revision as of 20:13, 22 June 2012


Rosewill RNX-GX4 serial pinout with max232 chip connections

The serial port "J8" is located on the upper right corner of board. There are 5 solder points Ground, RX, not used, TX and Ground.

Netcore NW618 same as Rosewill RNX-GX4

The picture shows the serial port connected to a MAX232CPE serial level converter chip. Image:RNX-GX4 Serial Port Connections pic3e.jpg