Printer Sharing

From DD-WRT Wiki

Revision as of 11:37, 24 January 2007 by Sbn (Talk | contribs)
(diff) ←Older revision | Current revision (diff) | Newer revision→ (diff)
Jump to: navigation, search

Install USB support (usb_storage, sd_mod etc. can be left out if no need for external storage).

Printer driver

Install printer driver:

 ipkg install kmod-usb-printer

Edit /jffs/etc/config/usb.startup and add

 insmod /jffs/lib/modules/2.4.30/printer.o

Connect printers and reboot your router

See if any printers have been found:

 dmesg | grep usb

It should show something like this (I have 2 printers connected)

 <6>printer.c: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x000D
 <6>printer.c: usblp1: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x04A9 pid 0x108C

usblp0 means that the found printer is accessible at /dev/usb/lp0 etc.

Print server

Now Install printserver daemon:

 ipkg install p910nd

Edit /jffs/etc/config/usb.startup and add

 #brother laser
 /jffs/usr/sbin/p910nd -b -f /dev/usb/lp0 0
 #canon inkjet
 /jffs/usr/sbin/p910nd -b -f /dev/usb/lp1 1

(correct the above to match your setup)

-b means bidirectional, -f specifices device name, and the last number can be 0,1 or 2, making the print server listen at port 9100, 9101 and 9102 respectively.

Reboot your router

Now, you router works as a print server with RAW printing over TCP/IP

Workstation setup

Windows XP: Find your printer in Control Panel - Printers etc. and open the properties page for it. Select the Ports tab. Click Add Port and choose Standard TCP/IP printer port and click New Port Enter you router's IP address (normally 192.168.1.1) and click Next Set Device type to custom and click settings. Make sure RAW is selected and specify the necessary port number (normally 9100) and click OK Click Next and Finish and Close Make sure the newly created port is selected for your printer and click OK

That's it