PC-Engines
From DD-WRT Wiki
Contents |
Hardware
- Atheros AR5312 chipset @ 220 MHz
- 32MB RAM
- 4MB Flash
- WLAN a/b/g (ieee 802.11a/b/g) @ 20dbi (100mW)
- 4x LAN & 1x WAN
- Antenna detachable (reverse-sma)
- Serial port (needs a rs232 converter)
- 5V/2A PSU
- Price: ~75€
Installation
- x86 webupgrade version if dd-wrt is already running
or for initial flashing
- CompactFlash Card >16MB (for outdoor usage industrial cards should be preferred)v
- physdiskwrite >0.5
- x86 version .image
usage:
physdiskwrite [-u] <image-file>
...or just simply drag-and-drop the image file onto the physdiskwrite.exe icon.
BrainSlayer:
dd-wrt-webupgrade images are for upgrading using the webinterface too. for new install, please use the .image files
and physdiskwrite for writing
dd-wrt boots per default from /dev/hda - /dev/hdd interfaces which means you can install it on any ide compatible device like cf cards or standard harddisks
per default dd-wrt prints only messages out on the serial console. if you have a vga capable device you may modify the booloader settings to use tty0 instead of ttyS0
you can also edit the bootloader settings in a perstant way on /boot/boot/grub/menu.lst after booting
per default eth0 is wan and remote management on port 8080 is enabled. all other ethernet interfaces are used as lan interfaces but can be reconfigured from the basic setup page later
if your ethernet interface is not detected, please login using the serial console and write me the "lspci"
output (nickname: brainslayer within the forum)
image types:
dd-wrt-webupgrade_public.bin = free dd-wrt x86 version (for webupgrade) dd-wrt_public.image = free dd-wrt x86 version (raw image for cf or hdd) this version is limited to 4096 connections and wifi support is missing
dd-wrt-webupgrade_full.bin = full dd-wrt x86 version for registered users (for webupgrade) dd-wrt_full.image = full dd-wrt x86 version for registered users (raw image for cf or hdd) this version does support wifi as well as up to 65536 connections, future versions may support more depending on the available memory
dd-wrt-webupgrade_full_smp.bin = full dd-wrt x86 version for registered users (for webupgrade) dd-wrt_full_smp.image = full dd-wrt x86 version for registered users (raw image for cf or hdd) this version does support wifi as well as up to 65536 connections, future versions may support more depending on the available memory additionally this version is capable of using multiple cpu's
for registering you must buy a licence at the shop site
BS
FAQ
External links
Original Buffalo produkt page
Special DD-WRT WHR-HP-AG108 builds