One-to-one NAT
From DD-WRT Wiki
I'm using this type of setup, with three public IPs. WRT54GL v.1.1 with DD-WRT RC6 and it works just fine.
I have done following:
Contents |
Setup
Startup
set up new public static ip on dd-wrt wan interface vlan1
ifconfig vlan1:1 PUBLIC_IP netmask NETMASK broadcast BROADCAST
Firewall
SNAT/DNAT
route all packets for the new public ip, to a certain local ip
iptables -t nat -I PREROUTING -i vlan1 -d PUBLIC_IP -j DNAT --to-destination LAN_IP
masquerade returned packets from the local ip to the public ip
iptables -t nat -I POSTROUTING -o vlan1 -s LAN_IP -j SNAT --to-source PUBLIC_IP
PORT FORWARD
forward port X to above local IP
iptables -I FORWARD -p tcp -i vlan1 -d LAN_IP --dport X -j ACCEPT
You could also replace above rule with the following:
iptables -I FORWARD -p all -i vlan1 -d LAN_IP -j ACCEPT
which instead of forwarding just a single port, will let through all tcp/udp connections on all ports to this public ip-->lan ip.
With other words, no firewalling what so ever.