Netgear WNR2000V3

From DD-WRT Wiki

Revision as of 17:50, 19 January 2014 by Sash (Talk | contribs)
Jump to: navigation, search

Contents


The orig firmware is based on openwrt.


Initial flashing instruction

For initial flashing just flash the appropriate DD-WRT overtake image file (WW (Worldwide), NA (North America)) though the web interface. After the reboot DD-WRT will answer at 192.168.1.1

Recovery

If you have a bricked device or you want to go back to the original firmware you can flash the dive useing the recovery boot procedere.


  • press and hold the reset button
  • powercyle the device
  • keep holding the button until the power led flashes
  • start to transfer the firmware with an tftp client
  • when the transfer begins release the reset button
  • wait until the unit reboots