Netgear WNR2000V3

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 15:42, 20 February 2014 (edit)
Sash (Talk | contribs)
(Initial flashing instruction)
← Previous diff
Revision as of 17:08, 22 September 2014 (edit) (undo)
Donny (Talk | contribs)
(Initial flashing instruction)
Next diff →
Line 12: Line 12:
The latest working DD-WRT version is 20120319 build 18777 ([http://svn.dd-wrt.com/ticket/3187 ticket]) and current webflash images are to big for flashing ([http://svn.dd-wrt.com/ticket/3189 ticket])! The latest working DD-WRT version is 20120319 build 18777 ([http://svn.dd-wrt.com/ticket/3187 ticket]) and current webflash images are to big for flashing ([http://svn.dd-wrt.com/ticket/3189 ticket])!
 +
 +Steps for flashing:
 +
 +*Read this thread. All of it: http://www.dd-wrt.com/phpBB2/viewtopic.php?t=172030
 +*Download this file. You can download without registering: http://downloadcenter.netgear.com/en/Disclaimer.aspx?redirecturl=http://netgeardownload.registria.com/single_page_registration?product[sku]=wnr2000v3&download_url=http://www.downloads.netgear.com/files/GDC/WNR2000V3/WNR2000v3%20Initial%20Release%20Firmware%20Version%201.0.1.26.zip
 +*Unzip the file you just downloaded.
=Recovery= =Recovery=

Revision as of 17:08, 22 September 2014

Contents


The orig firmware is based on openwrt.


Initial flashing instruction

For initial flashing just flash the appropriate DD-WRT overtake image file (WW (Worldwide), NA (North America)) though the web interface. After the reboot DD-WRT will answer at 192.168.1.1. Future upgrades are done though the GUI to the latest builds.

As of 20140119 you can only install DD-WRT if your Netgear fw version is < 1.1.2.10 (ticket). Netgear decided to limit the orif fw size, so you will have to downgrade orig firmware to be able to flash to DD-WRT.

The latest working DD-WRT version is 20120319 build 18777 (ticket) and current webflash images are to big for flashing (ticket)!

Steps for flashing:

Recovery

If you have a bricked device or you want to go back to the original firmware you can flash the device useing the recovery boot procedere.


  • press and hold the reset button
  • powercyle the device
  • keep holding the button until the power led flashes
  • start to transfer the firmware with an tftp client to 192.168.1.1
  • when the transfer begins release the reset button
  • wait until the unit reboots

External Links

OpenWRT