Netgear WNR2000V3
From DD-WRT Wiki
(Difference between revisions)
Revision as of 17:50, 19 January 2014 (edit) Sash (Talk | contribs) (→Initial flashing instruction) ← Previous diff |
Revision as of 18:01, 19 January 2014 (edit) (undo) Sash (Talk | contribs) (→Recovery) Next diff → |
||
Line 17: | Line 17: | ||
* powercyle the device | * powercyle the device | ||
* keep holding the button until the power led flashes | * keep holding the button until the power led flashes | ||
- | * start to transfer the firmware with an tftp client | + | * start to transfer the firmware with an tftp client to 192.168.1.1 |
* when the transfer begins release the reset button | * when the transfer begins release the reset button | ||
* wait until the unit reboots | * wait until the unit reboots |
Revision as of 18:01, 19 January 2014
Contents |
The orig firmware is based on openwrt.
Initial flashing instruction
For initial flashing just flash the appropriate DD-WRT overtake image file (WW (Worldwide), NA (North America)) though the web interface. After the reboot DD-WRT will answer at 192.168.1.1
Recovery
If you have a bricked device or you want to go back to the original firmware you can flash the dive useing the recovery boot procedere.
- press and hold the reset button
- powercyle the device
- keep holding the button until the power led flashes
- start to transfer the firmware with an tftp client to 192.168.1.1
- when the transfer begins release the reset button
- wait until the unit reboots