Netgear WNR2000V3

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search

Sash (Talk | contribs)
(New page: __TOC__ =Initial flashing instruction= For initial flashing just flash the appropriate =Recovery= If you have a bricked device or you want to go back to the original firmware you ca...)
Next diff →

Revision as of 17:46, 19 January 2014

Contents


Initial flashing instruction

For initial flashing just flash the appropriate


Recovery

If you have a bricked device or you want to go back to the original firmware you can flash the dive useing the recovery boot procedere.


  • press and hold the reset button
  • powercyle the device
  • keep holding the button until the power led flashes
  • start to transfer the firmware with an tftp client
  • when the transfer begins release the reset button
  • wait until the unit reboots