Netgear WNR2000V3
From DD-WRT Wiki
(Difference between revisions)
Revision as of 18:08, 19 January 2014 (edit) Sash (Talk | contribs) (→Initial flashing instruction) ← Previous diff |
Revision as of 18:10, 19 January 2014 (edit) (undo) Sash (Talk | contribs) (→Initial flashing instruction) Next diff → |
||
Line 10: | Line 10: | ||
- | As of 20140119 you can only install DD-WRT if your Netgear fw version is < 1.1.2.10 ([http://svn.dd-wrt.com/ticket/3188 ticket])! | + | As of 20140119 you can only install DD-WRT if your Netgear fw version is < 1.1.2.10 ([http://svn.dd-wrt.com/ticket/3188 ticket]) and the latest working DD-WRT version is 20120319 build 18777 ([http://svn.dd-wrt.com/ticket/3187 ticket])! |
=Recovery= | =Recovery= |
Revision as of 18:10, 19 January 2014
Contents |
The orig firmware is based on openwrt.
Initial flashing instruction
For initial flashing just flash the appropriate DD-WRT overtake image file (WW (Worldwide), NA (North America)) though the web interface. After the reboot DD-WRT will answer at 192.168.1.1
As of 20140119 you can only install DD-WRT if your Netgear fw version is < 1.1.2.10 (ticket) and the latest working DD-WRT version is 20120319 build 18777 (ticket)!
Recovery
If you have a bricked device or you want to go back to the original firmware you can flash the dive useing the recovery boot procedere.
- press and hold the reset button
- powercyle the device
- keep holding the button until the power led flashes
- start to transfer the firmware with an tftp client to 192.168.1.1
- when the transfer begins release the reset button
- wait until the unit reboots