Netgear WNR2000V3
From DD-WRT Wiki
(Difference between revisions)
Revision as of 18:24, 19 January 2014 (edit) Sash (Talk | contribs) (→Initial flashing instruction) ← Previous diff |
Revision as of 18:25, 19 January 2014 (edit) (undo) Sash (Talk | contribs) (→Recovery) Next diff → |
||
Line 24: | Line 24: | ||
* wait until the unit reboots | * wait until the unit reboots | ||
+ | =External Links= | ||
+ | |||
+ | [http://wiki.openwrt.org/toh/netgear/wnr2000 OpenWRT] | ||
[[Category:Netgear guides]] | [[Category:Netgear guides]] |
Revision as of 18:25, 19 January 2014
Contents |
The orig firmware is based on openwrt.
Initial flashing instruction
For initial flashing just flash the appropriate DD-WRT overtake image file (WW (Worldwide), NA (North America)) though the web interface. After the reboot DD-WRT will answer at 192.168.1.1. Future upgrades are done though the GUI to the latest builds.
As of 20140119 you can only install DD-WRT if your Netgear fw version is < 1.1.2.10 (ticket) the latest working DD-WRT version is 20120319 build 18777 (ticket) and current webflash images are to big for flashing (ticket)!
Recovery
If you have a bricked device or you want to go back to the original firmware you can flash the dive useing the recovery boot procedere.
- press and hold the reset button
- powercyle the device
- keep holding the button until the power led flashes
- start to transfer the firmware with an tftp client to 192.168.1.1
- when the transfer begins release the reset button
- wait until the unit reboots