Netgear WNR2000V3

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 18:01, 19 January 2014 (edit)
Sash (Talk | contribs)
(Recovery)
← Previous diff
Revision as of 18:08, 19 January 2014 (edit) (undo)
Sash (Talk | contribs)
(Initial flashing instruction)
Next diff →
Line 8: Line 8:
For initial flashing just flash the appropriate DD-WRT overtake image file (WW (Worldwide), NA (North America)) though the web interface. For initial flashing just flash the appropriate DD-WRT overtake image file (WW (Worldwide), NA (North America)) though the web interface.
After the reboot DD-WRT will answer at 192.168.1.1 After the reboot DD-WRT will answer at 192.168.1.1
 +
 +
 +As of 20140119 you can only install DD-WRT if your Netgear fw version is < 1.1.2.10 ([http://svn.dd-wrt.com/ticket/3188 ticket])!
=Recovery= =Recovery=

Revision as of 18:08, 19 January 2014

Contents


The orig firmware is based on openwrt.


Initial flashing instruction

For initial flashing just flash the appropriate DD-WRT overtake image file (WW (Worldwide), NA (North America)) though the web interface. After the reboot DD-WRT will answer at 192.168.1.1


As of 20140119 you can only install DD-WRT if your Netgear fw version is < 1.1.2.10 (ticket)!

Recovery

If you have a bricked device or you want to go back to the original firmware you can flash the dive useing the recovery boot procedere.


  • press and hold the reset button
  • powercyle the device
  • keep holding the button until the power led flashes
  • start to transfer the firmware with an tftp client to 192.168.1.1
  • when the transfer begins release the reset button
  • wait until the unit reboots