Netgear WNR2000V3
From DD-WRT Wiki
(Difference between revisions)
Revision as of 17:46, 19 January 2014 (edit) Sash (Talk | contribs) (New page: __TOC__ =Initial flashing instruction= For initial flashing just flash the appropriate =Recovery= If you have a bricked device or you want to go back to the original firmware you ca...) ← Previous diff |
Revision as of 17:50, 19 January 2014 (edit) (undo) Sash (Talk | contribs) (→Initial flashing instruction) Next diff → |
||
Line 1: | Line 1: | ||
__TOC__ | __TOC__ | ||
- | + | The orig firmware is based on openwrt. | |
- | For initial flashing just flash the appropriate | ||
+ | =Initial flashing instruction= | ||
+ | For initial flashing just flash the appropriate DD-WRT overtake image file (WW (Worldwide), NA (North America)) though the web interface. | ||
+ | After the reboot DD-WRT will answer at 192.168.1.1 | ||
=Recovery= | =Recovery= |
Revision as of 17:50, 19 January 2014
Contents |
The orig firmware is based on openwrt.
Initial flashing instruction
For initial flashing just flash the appropriate DD-WRT overtake image file (WW (Worldwide), NA (North America)) though the web interface. After the reboot DD-WRT will answer at 192.168.1.1
Recovery
If you have a bricked device or you want to go back to the original firmware you can flash the dive useing the recovery boot procedere.
- press and hold the reset button
- powercyle the device
- keep holding the button until the power led flashes
- start to transfer the firmware with an tftp client
- when the transfer begins release the reset button
- wait until the unit reboots