Netgear WNDR4000
From DD-WRT Wiki
Hardware Specs
CPU | Broadcom BCM4718 |
---|---|
CPU Speed | 480 MHz |
Flash ROM | 8 MB |
RAM | 64 MB |
Radios | 2.4 GHz and 5 GHz |
WLAN Support | a/b/g/n |
WLAN Max Speed | 300 mbps on 2.4Ghz and 450mbps on 5Ghz |
Antenna Location | Internal |
Switch | 4x GigE + 1 GigE WAN |
USB | 1x USB 2.0 |
Flashing Instructions
You'll need to download 2 files before you begin this procedure. For those upgrading from an older build, you need not to use the initial trailed mini .chk file (the .chk file with the router name in it is the trailed build for initial flashing only), but you must use nv64k to upgrade with or you'll end up with a bricked router.
And this one for a more feature filled build (Will give you USB function amongst other features)
For going from stock Netgear firmware to DD-WRT on a WNDR4000, installation goes like this:
- Set a static IP such as 192.168.1.8 on the PC you will be using for the flash.
- Connect the PC to one of the router's LAN ports (unplug your ISP modem for the moment)
- Perform a 30-30-30 Reset http://www.dd-wrt.com/wiki/index.php/Hard_reset_or_30/30/30 on the router.
- In your web browser, go to http://192.168.1.1
- Cancel the router’s automatic firmware update checking, then click on “Router Upgrade” in the menu at left.
- Upload the special .chk firmware file, that you downloaded from the link above.
- Wait 5 minutes after the router says it is done, then perform another 30-30-30 reset. Make sure you clear your browsers cache between updating firmwares.
- Repeat steps 4-7 with the nv64k.bin firmware file.
- Login and start tweaking
- Should you want to use DHCP ip assignment, remember to un-set the static ip that you set in the above instructions.
Build information
As noted in bold in the flashing instructions, only use builds with nv64k in the name for upgrading, anything else will brick your router!
To find the latest builds, you can access the DD-WRT file server.
ftp://ftp.dd-wrt.com/others/eko/BrainSlayer-V24-preSP2
To read into the WNDR4000's forum thread for reference.
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=90600