Netgear WNDR3800

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 23:27, 6 July 2012 (edit)
Buddee (Talk | contribs)

← Previous diff
Revision as of 23:38, 6 July 2012 (edit) (undo)
Buddee (Talk | contribs)
(add a few infos, this still needs alot of work..)
Next diff →
Line 34: Line 34:
|- |-
|} |}
 +
 +=Flashing Instructions=
 +
 +[b]If you have an WNDR3800 with stock firmware, and the version is greater than 1.0.0.16 - you will need to downgrade to atleast 1.0.0.16 - as of 1.0.0.18 or greater, Netgear has put a check in their firmware revisions to disallow anything but Netgear's firmware to be used.[/b]
 +
 +You will need these files for the flashing procedure.
 +
 +If you have a North American model, you will need this for the initial flash.
 +
 +ftp://ftp.dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/2012/06-08-12-r19342/netgear-wndr3800/wndr3800-factory_NA.img
 +
 +If you have an EU or Asia model, you will need this for the initial flash.
 +
 +ftp://ftp.dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/2012/06-08-12-r19342/netgear-wndr3800/wndr3800-factory.img
 +
 +The other file located within the WNDR3800's dd-wrt dir is for upgrading to newer or older dd-wrt builds from within the dd-wrt webgui. Its naming scheme looks like so - wndr3800-webflash.bin

Revision as of 23:38, 6 July 2012

Place holder for netgear WNDR3800, please add infos as needed.

Hardware Information

Image:wndr3800-1.jpg

CPU Atheros AR7161
CPU Speed 680 MHz
Flash ROM 16 MB
RAM 128 MB
Radio 2x 2.4 GHz or 5 GHz
WLAN Support a/b/g/n
WLAN Max Speed 300 mbps
Antenna Location Internal
Switch 4x GigE LAN + 1 GigE WAN

Flashing Instructions

[b]If you have an WNDR3800 with stock firmware, and the version is greater than 1.0.0.16 - you will need to downgrade to atleast 1.0.0.16 - as of 1.0.0.18 or greater, Netgear has put a check in their firmware revisions to disallow anything but Netgear's firmware to be used.[/b]

You will need these files for the flashing procedure.

If you have a North American model, you will need this for the initial flash.

ftp://ftp.dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/2012/06-08-12-r19342/netgear-wndr3800/wndr3800-factory_NA.img

If you have an EU or Asia model, you will need this for the initial flash.

ftp://ftp.dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/2012/06-08-12-r19342/netgear-wndr3800/wndr3800-factory.img

The other file located within the WNDR3800's dd-wrt dir is for upgrading to newer or older dd-wrt builds from within the dd-wrt webgui. Its naming scheme looks like so - wndr3800-webflash.bin