Netgear WNDR3400
From DD-WRT Wiki
ONLY the version 1 model is supported. Version 2&3 are not supported as of yet.
This router only uses k26 builds and ALL flashing must be with a build with k2.6 in the name.
- Read the [1] peacock announcement at the start of the broadcom forum. Read it all. Carefully.
Installation:
- There are two versions available. One is for [2]Netgear branded routers and the other is for [3]Cablevision routers.
- Do a factory reset and upgrade to the firmware above, it will complain about downgrading but just hit allow.
- DONE!
- To gain functionality of the usb port, upgrade to the [4]big version after flashing the mini version above.
Uninstallation:
- Download official firmware [5]
- Factory Reset DD-WRT
- Enable telnet under services
- Telnet to router (192.168.1.1)
- Issue the command "mtd erase linux" & wait ~3 mins
- tftp the official firmware to the router
- tftp for windows [6] enter router ip, leave password blank, select official firmware file
- 30-30-30 reset router