Netgear WNDR3300
From DD-WRT Wiki
Initial flash of dd-wrt firmware can be done though Netgear factory firmware GUI using a device specific .chk file
Just get this .chk file (as of 2009, May First) and use Netgear GUI to upload to your router. All done.
Few things I noticed so far.
- You can try but std never worked for me so far.
- If you brick it (green power light keeps blinking), unbricking is easy. Just use tftp to upload above .chk or factory firmware. (tftp info here)
These are the notes provided by Eko.
Files listed are located here
Notes:
Flashing Netgear WNDR3300
For first flash (running original Netgear's firmware) or for tftp please use dd-wrt.v24-12030_NEWD_mini_wndr3300.chk file.
If you need additional info WNDR3300 is discussed here.