Netgear WAG 102
From DD-WRT Wiki
Revision as of 05:55, 22 October 2008 (edit) Holgi03 (Talk | contribs) (→Hardware) ← Previous diff |
Revision as of 07:22, 22 October 2008 (edit) (undo) Holgi03 (Talk | contribs) (→Original Firmware (vxworks)) Next diff → |
||
Line 82: | Line 82: | ||
memcap: disabled <br> | memcap: disabled <br> | ||
watchdg: enabled <br> | watchdg: enabled <br> | ||
+ | |||
+ | |||
+ | '''Aufbau der Firmware Update-Files''' | ||
+ | |||
+ | -- | ||
==Installation== | ==Installation== |
Revision as of 07:22, 22 October 2008
Contents |
Hardware
- Atheros AR5312 chipset @ 220 MHz
- Flash: MX 29LV320CBTC-70G
- Net: RTL8201CP
- Ram: EM639165TS-6G
- FCC ID: PY307100064
- Serial Pinout: TXD | 3,3V | RXD | GND
- Baudrate 9600/8/n/1 (Original-Firmware) 115200/8/n/1 (Redboot/DD-WRT)
Original Firmware (vxworks)
Boot Menu
[Boot]: ?
? - print this list
@ - boot (load and go)
p - print boot params
c - change boot params
e - print fatal exception
v - print version
B - change board data
S - show board data
n netif - print network interface device address
$dev(0,procnum)host:/file h=# e=# b=# g=# u=usr [pw=passwd] f=# tn=targetname s=script o=other
boot device: tffs=drive,removable file name: /tffs0/vxWorks
Boot flags:
0x02 - load local system symbols
0x04 - don't autoboot
0x08 - quick autoboot (no countdown
0x20 - disable login security
0x40 - use bootp to get boot parameters
0x80 - use tftp to get boot image
0x100 - use proxy arp
available boot devices: Enhanced Network Devices ae0 tffs
Original Boot Parameter
[Boot]: p
boot device : tffs:
unit number : 0
processor number : 0
file name : /fl/wag102
inet on ethernet (e) : 192.168.0.232:0xffffff00
flags (f) : 0x0
other (o) : ae
Board Konfiguration
name: AP AR5001AP default
magic: 35333131
cksum: 1699
rev: 4
major: 1
minor: 0
pciid: 0013
wlan0: yes 00:18:4d:07:xx:xx
wlan1: yes 00:18:4d:07:xx:xx
enet0: yes 00:18:4d:07:xx:xx
enet1: no 34:12:78:12:xx:xx
uart0: yes
sysled: yes, gpio 7
factory: yes, gpio 6
serclk: internal
cpufreq: calculated 220000000 Hz
sysfreq: calculated 55000000 Hz
memcap: disabled
watchdg: enabled
Aufbau der Firmware Update-Files
--
Installation
- - - - - -
Recovery
- - - - - - -