Netgear R6400v2
From DD-WRT Wiki
Revision as of 00:19, 18 April 2020 (edit) Jeremywh7 (Talk | contribs) (Fix dead links and deprecated info.) ← Previous diff |
Current revision (00:52, 18 April 2020) (edit) (undo) Jeremywh7 (Talk | contribs) (→Installation - add boardid info) |
||
Line 41: | Line 41: | ||
==Installation== | ==Installation== | ||
Supported in DD-WRT (Netgear R6400v2 folder) since build [ftp://ftp.dd-wrt.com/betas/2018/06-10-2018-r36104/netgear-r6400v2/factory-to-dd-wrt.chk 36104]. There were also Kong builds (K3-AC-ARM folder) but are no longer supported. Use the .chk file for OEM upgrade and the webflash.bin file for DD-WRT upgrades. See [[Index:FAQ#Where_do_I_download_firmware.3F|Where do I download firmware?]]. | Supported in DD-WRT (Netgear R6400v2 folder) since build [ftp://ftp.dd-wrt.com/betas/2018/06-10-2018-r36104/netgear-r6400v2/factory-to-dd-wrt.chk 36104]. There were also Kong builds (K3-AC-ARM folder) but are no longer supported. Use the .chk file for OEM upgrade and the webflash.bin file for DD-WRT upgrades. See [[Index:FAQ#Where_do_I_download_firmware.3F|Where do I download firmware?]]. | ||
+ | |||
+ | ====Board ID==== | ||
+ | Build directory files to use based on Board ID: | ||
+ | *R6400v2 ''U12H332T20_NETGEAR'': '''netgear-r6400v2''' directory | ||
+ | *R6400v2 ''U12H332T30_NETGEAR'': '''netgear-r6400v2otp''' directory | ||
+ | *R6700v3 ''U12H332T77_NETGEAR'': '''netgear-r6700v3''' directory | ||
==Forum Thread== | ==Forum Thread== |
Current revision
This page is only for the Netgear R6400 v2. The v1 wiki is: Netgear R6400v1.
Contents |
[edit] Hardware Specs
CPU | Broadcom BCM4708A0 |
---|---|
CPU Speed | 1 GHz (2 Cores) |
Flash ROM | 128 MB |
RAM | 256 MB |
Radios | BCM4360 5 GHz & BCM4331 2.4 GHz |
WLAN Support | a/n+ac 3x3:3 & b/g/n 3x3:3 |
WLAN Max Speed | 450 Mb/s (2.4Ghz), 1300 Mb/s (5Ghz) |
Antenna Location | External |
Switch | 4x GigE LAN + 1 GigE WAN |
USB | 1x USB 3.0 + 1x USB 2.0 |
Power Adapter | 12VDC 2.5A wall wart |
[edit] Installation
Supported in DD-WRT (Netgear R6400v2 folder) since build 36104. There were also Kong builds (K3-AC-ARM folder) but are no longer supported. Use the .chk file for OEM upgrade and the webflash.bin file for DD-WRT upgrades. See Where do I download firmware?.
[edit] Board ID
Build directory files to use based on Board ID:
- R6400v2 U12H332T20_NETGEAR: netgear-r6400v2 directory
- R6400v2 U12H332T30_NETGEAR: netgear-r6400v2otp directory
- R6700v3 U12H332T77_NETGEAR: netgear-r6700v3 directory
[edit] Forum Thread
Netgear R6400 v2 and R6700v3 Install Guide
[edit] Debricking
See the second post in the above thread.
[edit] Reset
There are several methods to reset to default settings (clear NVRAM).
DO NOT "30-30-30" Reset ARM Devices!
Hardware reset button: When DD-WRT is running, holding the reset button for 10 sec.
DD-WRT GUI:
Use the Restore Factory Defaults option:
Administration -> Factory Defaults (select radio button, then apply settings)
...or select the Reset to Default settings option from the Firmware Upgrade drop down menu:
Administration -> Firmware Upgrade (select the firmware file and "Reset to Default" from dropdown, then Upgrade
Telnet/SSH (CLI):
Login and run `nvram erase && reboot` for Hard_reset_or_30/30/30#Erasing_NVRAM build 35770 and later.
Reset notes: In Feb. 2015 Kong announced a reset is required for certain upgrades as well. Do NOT restore an nvram backup as it will undo the reset.