Mikrotik Routerboard RB/532

From DD-WRT Wiki

Revision as of 00:18, 3 December 2006 by LuckMan212 (Talk | contribs)
Jump to: navigation, search

Image:Rb532 tn.gif



The Routerboard 532 is a high performance all-in-one integrated communications platform for high-throughput Ethernet and wireless based networks. Its simple and robust design ensures reliable non-stop operation of the unit. Compared to Geode SC1100 based boards (e.g. Soekris Engineering Net4801), this power-efficient design performs 2 to 3 times faster thanks to a MIPS 4Kc core CPU architecture.

From the base configuration of 3 Ethernet ports and 2 MiniPCI slots (for wireless cards) it can be extended by using daughterboards for four more MiniPCI slots, or even up to a total of 15 interfaces (9 Ethernet ports and 6 MiniPCI slots). A wide range of accepted input power means that you can connect to almost any direct current power source you already have on site. It also can be powered through an Ethernet port using Power-over-Ethernet technology (802.3af) or passive non-standard PoE.

RouterOS and Linux (reference Debian GNU/Linux image and source available) can be used to operate this board. This board is also compatible with DD-WRT starting with V23 SP2.

There are 2 versions of the Routerboard 532, the 'plain' 532, and the 532A. The key difference is that the 'A' version has double the RAM (64MB vs 32) and a faster CPU (400MHz vs. 266). There also exists some add-on boards:


(taken from the Routerboard website)

CPU MIPS 32 4Kc @ 266MHz / 400MHz (532A)
RAM 32MB / 64MB (532A) DDR onboard memory
Root loader RouterBOOT, 1Mbit Flash chip
Data storage 128MB onboard NAND memory chip

CompactFlash type I/II slot (also supports IBM/Hitachi Microdrive)

Ethernet ports One IDT Korina 10/100 Mbit/s Fast Ethernet port supporting Auto-MDI/X

Two VIA VT6105 10/100 Mbit/s Fast Ethernet ports supporting Auto-MDI/X

MiniPCI slot Two MiniPCI Type IIIA/IIIB slots
Daughterboard connector Present
Serial ports One DB9 RS232C asynchronous serial port
LEDs Power, 2 LED pairs for MiniPCI slots, 1 user LED
Watchdog IDT internal SoC hardware watchdog timer
Power options IEEE802.3af Power over Ethernet: 12V or 48V DC

Power jack/header 6..22V or 25..56V DC jumper selectable. PoE does not support power over datalines

Dimensions 14.0 cm x 14.0 cm (5.51 in x 5.51 in)
Temperature Operational: -20°C to +70°C (-4°F to 158°F)
Humidity Operational: 70% relative humidity (non-condensing)
Currently supported OS RouterOS 2.9, Linux 2.4