Linksys WRT610N v2.0

From DD-WRT Wiki

Revision as of 11:40, 26 December 2009 by Acidxchrist (Talk | contribs)
Jump to: navigation, search

Installation

Make sure you use a firmware with wrt610nv2 in the filename like the one below.

ftp://dd-wrt.com/others/eko/V24-K26/svn13491-snow/Linksys/WRT610Nv2/dd-wrt.v24-13491_NEWD-2_K2.6_mini_wrt610nv2.bin

a. Flash firmware through the Linksys WebGUI.

b. After a couple minutes you should see an "Update Completed Succesfully" Screen.

c. Wait...at least three minutes after that just to be safe.

d. Do a power cycle of the router. (Unplug the cord, count to 10 and plug it back in.)

e. Wait for the lights to return to normal, usually about 2 minutes.

f. Do a HARD reset. Wait. Check for the password page and login to change the password.

g. After you have DD-WRT on the router then you can flash a different firmware from this folder through the DD-WRT WebGUI.

ftp://dd-wrt.com/others/eko/V24-K26/svn13491-snow/Linksys/WRT610Nv2/