Linksys WRT610N v2.0
From DD-WRT Wiki
Revision as of 17:32, 7 January 2010 (edit) Acidxchrist (Talk | contribs) (→Installation) ← Previous diff |
Revision as of 15:22, 14 January 2010 (edit) (undo) DHC DarkShadow (Talk | contribs) m (→Installation - Added Note and warning about flashing) Next diff → |
||
Line 1: | Line 1: | ||
== Installation == | == Installation == | ||
+ | <font color=red><big>'''NOTE:'''</big></font> '''During configuration or flashing a device, the only that should be hooked to the device is the computer and power.'''<br> | ||
+ | <font color=red><big>'''Warning:'''</big></font> '''This unit MUST use K2.6 firmware.'''<br> | ||
'''Make sure you use a firmware with wrt610nv2 in the filename like the one below.''' | '''Make sure you use a firmware with wrt610nv2 in the filename like the one below.''' | ||
Revision as of 15:22, 14 January 2010
Installation
NOTE: During configuration or flashing a device, the only that should be hooked to the device is the computer and power.
Warning: This unit MUST use K2.6 firmware.
Make sure you use a firmware with wrt610nv2 in the filename like the one below.
ftp://dd-wrt.com/others/eko/V24-K26/svn13575/dd-wrt.v24-13575_NEWD-2_K2.6_mini_wrt610nv2.bin
a. Flash firmware through the Linksys WebGUI.
b. After a couple minutes you should see an "Update Completed Succesfully" Screen.
c. Wait...at least three minutes after that just to be safe.
d. Do a power cycle of the router. (Unplug the cord, count to 10 and plug it back in.)
e. Wait for the lights to return to normal, usually about 2 minutes.
f. Do a HARD reset. Wait. Check for the password page and login to change the password.
g. After you have DD-WRT on the router then you can flash a different firmware from this folder through the DD-WRT WebGUI.
ftp://dd-wrt.com/others/eko/V24-K26/svn13575/
Make sure that you do not flash any build to your router that has the name of a different model router at the end of the filename.