Linksys WRT610N v2.0

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 11:40, 26 December 2009 (edit)
Acidxchrist (Talk | contribs)

← Previous diff
Revision as of 17:30, 7 January 2010 (edit) (undo)
Acidxchrist (Talk | contribs)
(Installation)
Next diff →
Line 2: Line 2:
'''Make sure you use a firmware with wrt610nv2 in the filename like the one below.''' '''Make sure you use a firmware with wrt610nv2 in the filename like the one below.'''
-ftp://dd-wrt.com/others/eko/V24-K26/svn13491-snow/Linksys/WRT610Nv2/dd-wrt.v24-13491_NEWD-2_K2.6_mini_wrt610nv2.bin+ftp://dd-wrt.com/others/eko/V24-K26/svn13575/dd-wrt.v24-13575_NEWD-2_K2.6_mini_wrt610nv2.bin
a. Flash firmware through the Linksys WebGUI. a. Flash firmware through the Linksys WebGUI.
Line 18: Line 18:
g. After you have DD-WRT on the router then you can flash a different firmware from this folder through the DD-WRT WebGUI. g. After you have DD-WRT on the router then you can flash a different firmware from this folder through the DD-WRT WebGUI.
-ftp://dd-wrt.com/others/eko/V24-K26/svn13491-snow/Linksys/WRT610Nv2/+ftp://dd-wrt.com/others/eko/V24-K26/svn13575/

Revision as of 17:30, 7 January 2010

Installation

Make sure you use a firmware with wrt610nv2 in the filename like the one below.

ftp://dd-wrt.com/others/eko/V24-K26/svn13575/dd-wrt.v24-13575_NEWD-2_K2.6_mini_wrt610nv2.bin

a. Flash firmware through the Linksys WebGUI.

b. After a couple minutes you should see an "Update Completed Succesfully" Screen.

c. Wait...at least three minutes after that just to be safe.

d. Do a power cycle of the router. (Unplug the cord, count to 10 and plug it back in.)

e. Wait for the lights to return to normal, usually about 2 minutes.

f. Do a HARD reset. Wait. Check for the password page and login to change the password.

g. After you have DD-WRT on the router then you can flash a different firmware from this folder through the DD-WRT WebGUI.

ftp://dd-wrt.com/others/eko/V24-K26/svn13575/