Linksys WRT600N

From DD-WRT Wiki

Revision as of 21:53, 29 November 2008 by Maclover201 (Talk | contribs)
Jump to: navigation, search

Contents

Linksys WRT600N

Flashing Methods

Flashing DD-WRT

Download DD-WRT v24 SP1 mini for the WRT600N from the downloads section, reset your unit to factory defaults, and flash it via the stock web interface. Then download the mega version and flash it with the DD-WRT web interface. Reset your unit to factory defaults after flashing.

Reverting to Stock Firmware

Simply reset and flash the stock image via TFTP or through the web interface. Make sure to reset after flashing.

Known Bugs

Some LEDs Don't Work

The power, security, and USB LEDs still need to be fixed. Bear in mind that top men are working on resolving this. Currently, the Power LED constantly flashes, the USB LED doesn't work, and the Security LEDs either don't turn on at all or turn on randomly.

Strange Startup Procedure

When power is applied to the unit, it starts booting up. Then the LEDs blank out and come back on with the Power LED flashing. Be assured that this is completely normal behavior that may or may not be corrected in a future release and does not impact the functionality of the device.

Web Interface Crashes

The web interface sometimes crashes when trying to save port forwarding settings. Rebooting the device fixes the issue.