Linksys WRT600N

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 21:53, 29 November 2008 (edit)
Maclover201 (Talk | contribs)
(Added some other headings)
← Previous diff
Revision as of 21:57, 29 November 2008 (edit) (undo)
Maclover201 (Talk | contribs)
(Whoops, put the mini version back in there. Realized it doesn't need a mini version.)
Next diff →
Line 2: Line 2:
==Flashing Methods== ==Flashing Methods==
===Flashing DD-WRT=== ===Flashing DD-WRT===
-Download [http://www.dd-wrt.com/dd-wrtv2/downloads/v24-sp1/Consumer/Linksys/WRT600N_v1.1/dd-wrt.v24_mini_wrt600n.bin DD-WRT v24 SP1 mini for the WRT600N] from the downloads section, reset your unit to factory defaults, and flash it via the stock web interface. Then download the [http://www.dd-wrt.com/dd-wrtv2/downloads/v24-sp1/Consumer/Linksys/WRT600N_v1.1/dd-wrt.v24_mega_wrt600n.bin mega version] and flash it with the DD-WRT web interface. Reset your unit to factory defaults after flashing.+Download the [http://www.dd-wrt.com/dd-wrtv2/downloads/v24-sp1/Consumer/Linksys/WRT600N_v1.1/dd-wrt.v24_mega_wrt600n.binn WRT600N mega version] from the downloads section, reset your unit to factory defaults, and flash it via the stock web interface. Reset your router to factory defaults after flashing.
===Reverting to Stock Firmware=== ===Reverting to Stock Firmware===

Revision as of 21:57, 29 November 2008

Contents

Linksys WRT600N

Flashing Methods

Flashing DD-WRT

Download the WRT600N mega version from the downloads section, reset your unit to factory defaults, and flash it via the stock web interface. Reset your router to factory defaults after flashing.

Reverting to Stock Firmware

Simply reset and flash the stock image via TFTP or through the web interface. Make sure to reset after flashing.

Known Bugs

Some LEDs Don't Work

The power, security, and USB LEDs still need to be fixed. Bear in mind that top men are working on resolving this. Currently, the Power LED constantly flashes, the USB LED doesn't work, and the Security LEDs either don't turn on at all or turn on randomly.

Strange Startup Procedure

When power is applied to the unit, it starts booting up. Then the LEDs blank out and come back on with the Power LED flashing. Be assured that this is completely normal behavior that may or may not be corrected in a future release and does not impact the functionality of the device.

Web Interface Crashes

The web interface sometimes crashes when trying to save port forwarding settings. Rebooting the device fixes the issue.