Linksys WRT600N

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 21:41, 29 November 2008 (edit)
Maclover201 (Talk | contribs)
(Edited links, tweaked flashing procedure to a method that works for me.)
← Previous diff
Revision as of 21:43, 29 November 2008 (edit) (undo)
Maclover201 (Talk | contribs)
m (LEDs and Reset Button Don't Work)
Next diff →
Line 6: Line 6:
Simply reset and flash the stock image via TFTP or through the web interface. Make sure to reset after flashing. Simply reset and flash the stock image via TFTP or through the web interface. Make sure to reset after flashing.
-==LEDs and Reset Button Don't Work==+==LEDs Don't Work==
-Top men are working on resolving the LED issues. The power, security, and USB LEDs still need to be fixed.+ The power, security, and USB LEDs still need to be fixed. Bear in mind that top men are working on resolving this.
[[Category: Linksys]] [[Category: Linksys]]

Revision as of 21:43, 29 November 2008

Contents

Linksys WRT600N

Flashing DD-WRT

Download DD-WRT v24 SP1 mini for the WRT600N from the downloads section, reset your unit to factory defaults, and flash it via the stock web interface. Then download the mega version and flash it with the DD-WRT web interface. Reset your unit to factory defaults after flashing.

Reverting to Stock Firmware

Simply reset and flash the stock image via TFTP or through the web interface. Make sure to reset after flashing.

LEDs Don't Work

The power, security, and USB LEDs still need to be fixed. Bear in mind that top men are working on resolving this.